1979

Knitted items never go out of fashion, and are especially relevant, for obvious reasons, in the cold season. If you wish, you can create a miracle for each family member with your own hands. This needlework is available for those who know how to hold knitting needles and are familiar with a variety of loops. To make the products colorful, use patterns describing patterns for knitting mittens with knitting needles.

Mittens can be knitted different ways:

• crochet;
• traditionally (2 knitting needles);
• using a set of needles.

As a result, they are obtained whole or from parts that are sewn together. On five knitting needles, a product without seams is obtained. First, the dialed loops are divided equally into 4 knitting needles, the remaining one will be working. On the top and palm accounts for half. If you knit loops on all knitting needles, you get one row. When knitting mittens, patterns designed for 2 knitting needles are often used.

This requires compliance with certain rules:

1. Since this is a circle, all the loops on the wrong side are knitted in reverse: the face is the wrong side, the wrong side is the face.
2. When knitting with a set of knitting needles, pay attention only to odd rows, which are knitted twice.
3. All even rows are counted from right to left, but the loops are knitted in reverse: the wrong side is the face, the face is the wrong side.
4. If there is a shift in the pattern both on the face and on the wrong side, then all odd rows are knitted, as shown in the pattern for traditional knitting.

Knitting mittens with front stitch

Knitting at first is difficult for those who first picked up knitting needles. It is better to improve your skills on knitting simple things: socks, mittens, scarves. These items are necessary for a person. Nowadays you can buy them, and if they are tied by hands loved one, then it will become pleasant and the right gift.

Yarn selection

Yarn for mittens is chosen depending on weather conditions.

She may be:

• woolen - for severe frosts with winds;
• half-woolen - for variable temperature;
• acrylic - for small children.

Children under one year old are not comfortable in mittens made of wool and wool mixture, because it has the property of "biting". Despite the fact that acrylic is a synthetic fiber, it retains heat very well. Knitting threads can be dyed in one or more colors. There is a so-called fancy yarn. It has bumps and villi.

Things connected from such threads are original and fashionable.

Wool consumption for mittens:

• children's - from 50 to 80 g;
• women's - 80-100 g;
• men's - 100-120 g.

Needle selection

Knitting needles are the main tool of the knitter. They differ in purpose, in material of manufacture, in thickness. A sweater, jumper, jacket, dress are knitted with paired knitting needles or interconnected with a fishing line (circular). The needles are made from various materials. The knitter selects them at her own discretion.

What you need to pay attention to:

1. Lightness - the hand gets tired quickly from heavy ones.
2. Sliding thread - well-finished products do not catch the thread, which allows you not to be distracted and not nervous in the process.
3. End - the knitting needles should not be too sharp so as not to injure the fingers, blunt ends will hardly pry the thread.
4. Size - is determined by the diameter of the needle and is measured in millimeters. They are selected depending on the thickness of the thread. The density of knitting is achieved by the ratio of the thickness of the needles and yarn. On the skein of thread, the manufacturer indicates the number of knitting needles for knitting with this yarn.

Steel needles are good for fine yarn. They are not long, the surface is slippery, the hand does not get tired of the weight. Aluminum - stain the thread. Therefore, they are only suitable for dark yarn.

For mittens with patterns, according to the schemes with a description, knitting needles of different thicknesses are selected. For example, for knitting braids, harnesses, thicker tools are needed, and for an openwork pattern, thinner ones. Experienced craftsmen knit an elastic band with knitting needles 1 size smaller than the main part.

Required measurements

In order for the mittens to fit and sit perfectly on the hand, the following measurements are necessary:

Stages of circular knitting of plain mittens on four knitting needles

Having everything you need at hand (knitting needles, yarn, measurements), you can start knitting.

A set of loops and knitting elastic bands

First, knit an elastic band. To keep warm, it should fit tightly around the arm and not be short. In children's products, this part is at least 3 - 4 cm, and adult mittens look beautiful with an elastic band from 7 to 9 cm. If desired, it is knitted longer to make a fold. So it will look more voluminous. Elastic band - alternation of facial and purl loops: 1 × 1, 2 × 2. This gives it elasticity.

To determine the number of loops for elastic, use several methods:

1. It is necessary to knit a sample of 20 loops. By measuring, they find out how many loops are 1 cm. For example, there are 3 loops per 1 cm, and the width of the wrist is 16 cm. Multiply 16 by 3 and get 48 loops.
2. They clasp the wrist with a thread for work and increase it 3 times. Loops are collected from the resulting length.

Knitting tools should have the same number of loops.

Cast on 48 sts. Knit the first row of stitches with the face and inside out. Distribute 12 sts on knitting needles and connect: tie the remaining tail and knitting thread. This place marks the beginning of a new row. You can mark it with a pin. So the serial number of the knitting needle is accurately determined, this is important for further work.

Stitch knitting technique

Patterns for knitting mittens with knitting needles, descriptions of which can be found on the Internet, will seem complicated to beginner craftswomen. Therefore, it is optimal for them to start work with a simple one - knit loops stockinette stitch.

Knitting a hole for the thumb

The place for the finger is performed as follows:

1. They determine which needle the finger will be on: for one hand - on the third, for the other - on the fourth.
2. The first loop is knitted, then after 10 sts a thread is threaded and tied. Immediately add the missing 10 loops, and knit the remaining loop.
3. They do the same when knitting the left mitten on the corresponding tool.

Creating a toe

To create a toe, the reduction of the loops begins. On the first and third needles, they are knitted two at a time at the beginning of the row, on the second and fourth - at the end.
Decrease every three rows until 8 sts remain. All loops are pulled together with a thread and hidden on reverse side.

Thumb knitting

To tie a finger, loops are collected on a working tool, and the missing ones are added from the edge. They are divided into 3 parts, and the fourth work.
Knit to the middle nail plate, and then they begin to decrease 2 loops on each tool until everything remains. They are pulled together with a thread, which is fixed on the wrong side.

Knitting mittens with an openwork pattern - a description and patterns for beginners

Patterns for knitting mittens, patterns with a description of the craftswoman are collected in collections using every opportunity: master classes, educational literature, the possibilities of the Internet. They vary in degree of difficulty. A beginner needlewoman will choose a suitable pattern for herself to develop knitting skills.

You can start improving your craft with the use of thread different colors. Take balls of different colors. The result is striped mittens. Colors can be bright, contrasting for children's mittens. Using stripes of the same color, but different shades, get more sophisticated option.

On the Internet, you can find and use patterns for knitting with the jacquard method. In this case, patterns of various subjects are knitted with a thread of a contrasting color. Mittens are tight, as with wrong side the threads are intertwined, creating an additional layer.

Complexity openwork patterns is that the work requires a constant count of the number of loops.

After all, the beauty of the pattern is created by adding them with the help of cap loops and decreasing by knitting 2, 3 loops together. In this case, the number of loops remains unchanged. One mistake leads to a skewed product.

Schemes describing patterns for knitting mittens are offered by many sites. When knitting with front stitch is fully mastered, you can proceed to the use of simple patterns. They are knitted after the gum is formed on the upper side of the mittens, that is, facial loops are knitted on the palm.

Pattern number 1. "Pigtails"

A simple braid pattern will be mastered by a beginner:

Pattern number 2. "Royal braid"

This pattern is more complex than the previous one. Its difference is that the loops are interchanged, first leaving part of the loops in front of work, then behind. It turns out that the pigtail either diverges in different directions, then converges.
In this pattern, only loops knitted in the front way. The loops are interchanged after 5 rows. For the pattern, 22 loops are needed.

Pattern number 3. "Openwork hearts"

This pattern is a test of possibilities for a beginner craftswoman.

The contour of the hearts is obtained thanks to holes from knitted air loops:

1. For one heart, you need 13 loops if it is a large pattern, and 11 for a small one.
2. The loops are divided equally, they are knitted in half, a slip loop is made and immediately two loops are together so that their number does not change.
3. In the next row, the slip loop is knitted at the back.
4. In odd rows, two caps are made, and two together next to each other.
5. Between them, increase the number of loops to 5.
6. This is done in 3, 5, 7 rows. At 9 p. there will already be three cap and 3 p. two together.
7. At 11 p. - four caps, and between them 2 times three together. Then the pattern is repeated.

Pattern number 4. "Asterisks"

You can use a simple pattern that will decorate children's mittens.

An asterisk is knitted from three loops:

• first three loops together,
• then cape,
• again knit these three loops.

They are arranged depending on the number of loops in checkerboard pattern. Between the stars there are loops connected in the front way.

Pattern number 5 "Bumps"

The pattern is simple to perform, and is a knitting from one loop 3. Then the fabric is turned and these additional loops are purl. Return the knitting, and shorten the loops by knitting them together.
Place the picture as you wish. It is good for both children's products and youth mittens.

Down mittens

Patterns for mittens with knitting needles, thanks to the many schemes with descriptions, can be selected at will.

In severe frosts, mittens made of downy yarn will help protect your hands from the cold. Products made of fluff are comfortable, warm, light. To create a downy thread, the wool of a special breed of goats is used, which is grown in Russia in three regions: Volgograd, Orenburg and Altai.

A special technology makes it possible to obtain a thin and at the same time strong thread, from which craftswomen create things of amazing beauty.

Down properties

Goat down is completely natural. The beneficial effect of down fiber on the human body has been noticed since ancient times. Its healing properties are used in nursing premature babies. For this, babies are wrapped in downy shawls that retain heat. Elderly people are saved from radiculitis, osteochondrosis and arthrosis with the help of downy yarn products.

With a cold alcohol compresses replaced with a bandage from a downy scarf.

Down products not only retain heat, but also remove excess moisture. In downy mittens, socks, hats, the body will always be dry. The hypoallergenic property of goat down is used in the manufacture of children's things. Down mittens have increased wear resistance. Dirt hardly sticks to them. Proper care will allow them to remain in excellent condition for a long time.

The choice of knitting technique from downy yarn

Down yarn mittens are knitted with stocking needles (a set of five) in a circular pattern. Products are warm, soft, light and durable. A thin fluffy thread lies flat, pleasant to work with. The upper part of the mittens is decorated with braids, plaits, openwork drawings. Openwork fantasies do not at all reduce the warmth of the product. Therefore, the possibilities of knitters are endless.

Pattern "Openwork leaves"

The pattern requires 22 loops. The scheme of the pattern is designed for an attentive craftswoman. Counting the number of loops is the key to success.
The pattern is obtained thanks to the holes from knitting the caps, made by the facial method, and rearranging the two facial loops. They diverge to the right and left of the central purl loop.

Bindweed pattern

On downy mittens, a pattern consisting of unusual flagella will look good. The tourniquet itself is an alternation of loops knitted in the front and back ways. Every 10 rows there is a crossing on one side to the right, on the other - to the left: first knit the front, then the wrong loops.

There are a lot of patterns for knitting mittens with knitting needles. Schemes with a description will not become clear immediately. Persistence and desire will help overcome difficulties.

Choice of yarn color

Natural downy yarn has different colors: white, gray, black. White thread products are the most spectacular. Modern designers believe that down toilet items go well with fashionable clothes. A set of a hat, scarf and white mittens will make the girl irresistible.

Men's mittens

In cold weather, men will not refuse warm mittens, hands tied beloved woman. They are indispensable during walks in the park, ski trips in the forest, on the skating rink.

When creating men's mittens, the same methods are used as when knitting women's and children's products:

• choose the yarn and the desired number of knitting needles;
• make the necessary measurements;
• start knitting with an elastic band, which should not be short;
• knit the main part before making a hole for the thumb;
• continue knitting until the loops decrease;
• create a toe;
• knit thumb.

When choosing a yarn color, you need to take into account the preferences of a man: black, blue, gray, brown, bottle, khaki. To decorate the top of a warm pair, use all kinds relief patterns: plaits, braids.

Patterns describing patterns for knitting mittens with knitting needles are not always suitable for men's products. You can use the “Pearl” pattern, which represents the alternation of front and back loops: if in the first row they knit from the front side, then in the next row in its place they knit from the inside. This is a simple drawing, but it looks decent.

Knitting is one of the ancient types of needlework, but its popularity not only does not fall, but only grows every year. The fantasy of knitters knows no bounds. The desire to make a knitted thing special and unique finds understanding among connoisseurs of hand knitting.

Knit mittens with knitting needles so that your hands do not freeze even in the most severe frost!

Mittens are the most practical and convenient accessory for cold winter. Today on the market you can buy mittens different models, but it is more pleasant to wear if you tie them yourself.

• If you learn how to knit clothes, then you can create whole sets for winter - a hat, scarf or snood and mittens. These things complement each other perfectly if they are created in the same style using the same pattern.
• To learn to knit beautiful mittens, you must first create simple model mittens - with a simple pattern and without a seam.
• Based on the ability to knit such accessories, you will be able to knit any warm items of clothing for your husband and children.

Mittens, like woolen socks, should be able to knit every woman. Let's look at how to create simple mittens for women and men's knitting needles seamless.

Scheme and description:

Such a product can be plain, or you can add a thread of a different color to an elastic band or front surface. The knitting pattern for such mittens is simple: 2x2 elastic on the wrist, the rest is the front surface.

• For the knitting process, prepare woolen yarn- 70 grams and 5 short knitting needles No. 3.
• For a wrist circumference of approximately 20 cm, you need to dial 36 loops(9 stitches on each needle).
• Knit the right mitten first. Mentally, for yourself, number the knitting needles: on the 1st and 2nd knitting needles - the loops of the lower part of the product (palm), on the 3rd and 4th - the top.
• Tie first an elastic band 2x2 7 cm high.
• Then knit in the round facial loops to the beginning of the thumb - 7 cm.

We continue the steps:

• Knit the thumb on the right part on the first knitting needle, and for the left - on the second knitting needle. So, knit the first loop of the first knitting needle with a regular front stitch, and remove the 8 others on a safety pin, fasten it.
• Then cast on 8 yarn over on the same needle. and knit the last 9th loop with the front stitch. The mitten has a hole for the thumb.
• Now knit to the nail of the little finger - 8 cm.
• Toe mittens knitted with decreasing loops. On the 1st and 3rd needles, knit the first two loops together behind the back wall. First turn over the first loop. On the other needles, knit two loops together at the end behind the front wall.
• So knit until there are 2 loops on each knitting needle.. Tighten the loops and fasten from the inside out.
• Thumb knitting- remove the pin and insert one knitting needle in place of this pin, and thread the second on the opposite side. It turned out 7 loops on the lower needle and 6 loops on the top.
• Divide sts over 4 needles: three will have 4 loops each, and one will have 3 plus one loop, pull out from the side edge.
• Knit your finger in a circle to the beginning of the nail.. Then start subtracting.
• Decrease on the finger is made, as on the toe. When there is one loop left on each knitting needle, pull off the loops and fasten from the inside out.
• Knit the left mitten in the same way as the right, but in a mirror image.

If you have mastered the knitting technique with front stitch, then you should start knitting openwork patterns. Mittens with this pattern look original and stylish.

Knit such openwork mittens with knitting needles, it will turn out interesting, and your hands in such an accessory will be feminine and beautiful.

Patterns with descriptions:

• Cast on 44 sts - 11 sts on each needle. Knit a 2x2 rib.
• Knit the first row with knit loops.
• On next row, dec 2 sts together with RS. Do this on each spoke.
• Two knitting needles - front stitch. The other two knitting needles begin to knit a pattern: the wrong side, the rest are facial, the last is the wrong side.
• Again on two knitting needles facial loops.
• One purl and 6 front, yarn over, front, yarn over, remove one loop, remove 2 loops on left side. Pass the next loop through the loop that was removed and pull through it. Next, knit to the end of the needles.
• Two knitting needles again with front stitch.
• Purl stitch, knit 7 stitches, yarn over, knit stitch, yarn over, knit stitch, slip the stitch onto the right needle and subtract two stitches from the knit stitch. The loop that was thrown over, pull through the next loop. Then knit to the end of the needle.
• Again 2 knitting needles facial loops.
• Purl, throw 3 loops on a free knitting needle and leave at work. Knit 3, then slip sts off of an auxiliary needle and work in stockinette stitch. 2 front loops, yarn over, knit, yarn over, knit 2, throw 1 loop on the working knitting needle, decrease two loops. Pull out the thrown loop, 2 facial, purl.
• Two knitting needles in stockinette stitch.
• Inside, 9 front loops, naid, front, nakid. 3 facial, 3 facial. Throw a loop and 2 together. Pull out the thrown loop, inside out. Rapport is ready. Continue like this until the toe of the mittens.

See the video for details on knitting such a pattern. The craftswoman made double mittens with a knitted lining.

Video: Knitting Mittens double-Openwork leaves with braids. Part 1

Video: Knitting Mittens double-Openwork leaves with braids. Part 2

Video: Knitting Mittens double-Openwork leaves with braids. Part 3

Video: Knitting Mittens double-Openwork leaves with braids. Part 4

Video: Knitting Mittens double-Openwork leaves with braids. Part 5

Video: Knitting Mittens double-Openwork leaves with braids. Part 6

Video: Knitting Mittens double-Openwork leaves with braids. Finish.

Here are a few more patterns of openwork patterns for knitting mittens:

You can knit mittens and a shawl with this pattern - you get an interesting set.

An original pattern that is easy to knit on the needles. Leaves and bumps will perfectly decorate your mittens.

Beautiful rhombuses superimposed on each other will look great on the top of the mittens.

Mittens for lovers stylish accessory, which symbolizes the warmth of feelings and unity. In such mittens it is pleasant to feel the warmth of a loved one, walking together in severe frost.

Knit mittens for lovers with a white heart on a red background, or vice versa, a red heart on a white background. In addition, you can make a common mitten so that when walking through the streets of the city, always hold hands and bask in the warmth of each other.

Scheme with a description of the general mittens:

• The photo shows that the elastic band of the mittens for each hand is knitted separately. 7 cm knit with a pattern 2x2 - 2 pieces. Cast on 16 stitches on each needle. We will knit with two knitting needles.
• Now join two elastic bands on circular needles.

We continue:

• Knit in stockinette stitch in the round. There is no need for a finger hole on this mitten. Therefore, knit until the beginning of the creation of the heart 7-8 cm.
• Knit the heart according to the pattern, first making 6 loops in the middle of knitting on one side, with a white thread, through 2 loops.
• In the next row there will already be 7 loops with a white thread through one red thread. Next, continue along the pattern, first knitting loops with white thread, then decreasing White color until one loop remains.
• Tie the toe of the mitten as described above and when 2 loops remain, tighten them and fasten from the wrong side.

Here are a few more photos of how to knit mittens for lovers:

The pearl pattern is often used for knitting. Even a beginner needlewoman will be able to knit mittens with such a pattern, as it is simple.

How to knit women's mittens with pearl pattern? Scheme:

Description:

• 1st row alternates 1 front loop, 1 front loop.
• 2nd row - again alternate purl 1 and knit 1, but knit the wrong side over the front loop of the previous row, and knit the front loop over the wrong loop.
• Then repeat the 1st and 2nd row until the end of knitting.

Double mittens are comfortable to wear in the cold or when you want to play in the snow, especially for children. Such mittens will not get wet quickly, and your hands will always be warm.

How to knit winter women's and men's double mittens with knitting needles? A few tips:

• If knitting is still difficult for you, then knit the inner and outer mittens separately.
• Knit the inner mitten first. Then create the elastic of the outer mitt and the front surface to the base of the thumb. Pull the outer mitten over the inner one, straighten your finger so that it is outside and start tying it - it will be more convenient.
• To prevent the bottom of the mitten from slipping, make a couple of stitches in several knitting points, and fix the details.
• To knit the bottom of the mittens, use fine yarn, and for the top - a dense woolen thread. As a result, mittens will turn out warm and beautiful.

Tip: You can link separate two mittens and then insert one into the other, connecting the bottom of the gum with a regular needle and thread or crocheting the edges. You can also tie with a single cloth, and then insert one part into another. A simple fold is formed exactly in the center of the knitted elastic band.

Classics of the genre - jacquard mittens for the winter in Russia. The knitting is double and dense, thanks to the interweaving of threads of different colors. The product will be warm, and hands in such mittens will never freeze.

How to knit jacquard women's mittens with knitting needles? Scheme:

Beautiful and very stylish pattern. The diagram shows all the colors of the threads used.

These mittens are knitted from only two colors of yarn, but how interesting they look.

jacquard pattern"Owl" - stylish and fashionable.

Deer jacquard pattern. Only a real needlewoman can knit mittens with such an ornament.

Aran mittens look luxurious. Products with such a pattern are knitted for both adults and children. They are warm and beautiful.

How to knit women's long mittens with rhombuses and arans with knitting needles? Scheme:

Important: Maniches, snoods and hats turn out beautifully with such a pattern. Therefore, you can link whole set- Sleek and stylish.

From mohair, you can knit warm downy mittens with knitting needles. You can use any pattern. Suitable "Scythes", "Arans" and others. Here are some sample knitting patterns for mohair mittens:

You just want to put on mittens with a snowflake and go for a walk in the cold, brushing snow from the branches of trees and shrubs. It is easy to knit such mittens: cast on 44 loops, distribute on 4 knitting needles, knit an elastic band 2x2 (7 cm) and a front surface of 7 cm. Next, a hole for the finger is left, as described above, and the knitting of the snowflake itself begins.

Below is a diagram and description of how to knit New Year's mittens for women with a snowflake. This pattern is also called "Norwegian":

The elegance of the hand, the uniqueness of the image, the gentle style - all this is emphasized by the "Princess" mittens. An interesting pattern, reminiscent of arana, will make the products original and beautiful.

So, we are learning to knit mittens "Princess" with knitting needles. Scheme and description:

Mittens model "Princess" can be associated with different pattern. For example, the picture "Owls".

The pattern with plaits looks beautiful on the mittens. Here is his knitting pattern:

The deer, like the snowflake, is a symbol of winter and the New Year. Therefore, for knitting sweaters, socks and mittens, a pattern depicting this animal is used.

How to knit men's and women's mittens with deer knitting needles? Schemes, description:

Here is another pattern for knitting a deer on mittens.

Tip: You can invent your own deer, draw a diagram yourself and knit mittens on it. Get a unique and original accessory.

Gorgeous and unusually intertwined harnesses on knitted things. Mittens with such a pattern will definitely pay attention. Such an accessory will add individuality and originality to your image.

Knitting mittens with plaits is easy. Below is a diagram according to which you can create the outer part of the mitten on two knitting needles. On the other two knitting needles, the inside of the product is knitted with the front surface.

How to knit such patterns, it is better to see visually. The video tells in detail how to create an interesting accessory - mittens with harnesses.

Video: Knitting mittens with plaits Part 2 The main pattern.

Transformer mittens are convenient because when necessary, you can open your fingers without removing the product itself from your hand. These gloves are comfortable to wear. mobile phone in the cold It is also comfortable to work, for example, for trade workers if their activities take place on the street. When you need to accept and count money for a purchase, it is enough to remove the valve from the mitten and your fingers will be free.

Tip: Transformer mittens for men and women without fingers with a folding top are easy to knit with knitting needles. For a woman, you can take yarn in delicate shades: beige, white, pink, and for a man - blue, black, brown.

Scheme and description:

Knit these mittens with regular front stitch. Elastic band according to the scheme 1x1 or 2x2. Below is a knitting pattern for transformer mittens.

Work description:

The braided pattern looks unusual. If you knit mittens using Braids, you get a stylish accessory. Knitting such a pattern is easy - from the 9th row, the rapport is repeated.

How to knit braided mittens with knitting needles? Scheme:

Description of the knitting of this pattern:

Stages of work:

• First, knit 7 cm of elastic, dialing 36 loops and distributing on 4 knitting needles.
• Then, on two knitting needles, knit with a regular front stitch, and on the other two, knit with the Braid pattern.
• Leave a hole for the toe and knit to the beginning of the toe.
• Now begin to make decreases of loops, 2 on each knitting needle: on the first two, first knitting, and on the other two, at the end of knitting.
• When there is 1 stitch left on each needle, pull them off and fasten from the inside out.

Norwegian patterns are winter, Christmas trees, deer and snowflakes. Even if you knit only a snowflake, this will already be considered a pattern in the Norwegian or Scandinavian style. On mittens, you can create separately both deer, nature or snowflakes, or combine them in one pattern. Fantasy has no limits!

How to knit mittens "Norwegian patterns"? Scheme with description:

Important: When knitting such an ornament, it is important to be able to stretch the thread, because you need to constantly change the yarn of one color to another. Watch the quality of the broach so that the thread tension is uniform and the pattern does not lose its shape.

The broach process is performed as follows: straighten the knitted loops on the right knitting needle, pull the thread along them, and hold the thread with the index finger of the right hand, pressing it to the last knitted loop. On the wrong side, it is more convenient to press the thread with the thumb of the right hand.

Tip: On front side Knit and pull through the unused color so that it remains under the right needle. On the wrong side, knit with purl loops and pull the other thread with your left hand before work and under the right knitting needle. From the wrong side, the threads are pulled in front of the loops.

If you have learned how to stretch a thread of a different color, then you can start knitting Norwegian patterns according to any of the patterns. One cell in the diagram is one loop of a certain color.

Video: Knitting (mittens "Norwegian pattern")

This type of knitting can be done without broaches, but the fabric will be thinner than with broaches. Watch the video on how to knit jacquard without broaches.

Video: The easiest way to knit jacquard without broaches

How to knit mittens "Braid with a shadow": description

See how original these mittens look. Unusually, and few women knit like that. Make such mittens with your own hands and surprise your friends and relatives.

The pattern of knitting an Indian wedge on mittens with knitting needles:

• Knit the back side of the mittens as usual - with any pattern or just front loops. On the palm: 1st row- 15 front, from the 16th loop, tie 2 for the front and back walls, 4 front.
• 2nd row- 15 front, from the 16th loop, tie 2 for the front and back walls, 5 front.
• Knit in this pattern for 15 rows. with additions to the palm of the loops in each row. As a result, there should be 15 + 20 loops on the first two knitting needles.
• In the 16th row slip the finger loops onto the thread, knit in a circle and continue knitting to the required length of the mitten.

Have you already knitted mittens? different patterns, but I want something unusual and original. Knit thick yarn gloves. It will turn out very interesting, and the products will be warm and comfortable.

How to knit warm women's and men's mittens made of thick yarn? To knit mittens from such yarn, cast on half as many loops as for knitting mittens from thin threads. But, in order not to be mistaken with the number of loops, you need to make some calculations:

• Knit with a pattern of 10 cm thick yarn and calculate how many loops you have in 1 cm of knitting.
• Now you know how many loops to dial for one mitten - 18-20 or a little more.

Important: Knit mittens made of thick yarn with simple patterns - front or back stitch, tangle, and so on.

If you know how not only to knit, but also to embroider, then you can create beautiful model mittens. Knit the mittens in one color and make beautiful embroidery on the back.

Photo of mittens with knitting needles with embroidery:

Knitted mittens with delicate embroidery: photo

Set - hat, snood and mittens with knitting needles: photos of models

Knit a set for yourself, your child or husband - a hat, snood and mittens. It will decorate any image, and things made by hand native person, will warm in severe frosts.

Set - hat, snood and knitting mittens - photo models:

Beautiful products associated with the use of Arana and Braid patterns.

Set - hat, snood and mittens with knitting needles pink color: photos of models

A dark set created by knitting with a braid with a shadow pattern. It will look great with a coat or jacket in a contrasting color.

Set - hat, snood and mittens with knitting needles with an interesting pattern: photos of models

And again, a green tint - the color of the Christmas tree. Aranas and braids adorn the hat, mittens and snood.

Green set - hat, snood and mittens with knitting needles: photos of models

A gray set, but not at all boring, and even very stylish and interesting.

Gray set - hat, snood and mittens with knitting needles: photos of models

And again the “Braids” pattern, but the set is already knitted in beige. Classics always decorate and add originality to the image.

Set in beige color - hat, snood and mittens with knitting needles: photos of models

Knit things with your own hands. Please your family and friends. If you knit a set, then it can be a great gift, for example, for the New Year.

Video: MITTENS WITH SPOKES. CHILDREN'S MITTENS FOR THE AGE OF 2 YEARS. HOW TO CONNECT MITTENS OF ANY SIZE?

Mittens are a very warm, cozy and stylish accessory. Knitted needles Any needlewoman, even a beginner, can afford mittens. They are very easy to use and the result will not keep you waiting. In order to get a pair of warm and stylish mittens, you will need to spend one or a couple of evenings.

In the article below, we will look at knitting mittens with a knitting pattern, diagrams, descriptions and photos. various models. The pattern on the mittens can be knitted according to the scheme, embroidered, jacquard or sewn on. Pattern elements can be knitted or felted from wool for felting. There are many options, let's deal with all in order. But first, a little about what yarn is suitable for knitting mittens.

For knitted mittens and gloves should choose a not very thick thread. It is good to lay down in the product a thread 200-250 meters long in a 100 gram skein. It is not worth taking a thicker thread, then there will be difficulties with knitting a finger. If the yarn is thinner than the above, then you can knit in 2 threads.

For mittens with a pattern, you need to take the usual blended yarn. This is wool with various options composition. That thread is suitable, in which wool and acrylic are in half. For fluffy mittens, you can use alpaca or add thin thread mohair or kid mohair to the main thread.

As for the knitting needles, mittens are usually knitted on 4 knitting needles. To do this, use a set of 5 stocking double-sided knitting needles. The number of knitting needles can be taken according to the recommendations on the yarn or knitting features. Universal for mittens will be numbers 2.5 or 3.

The principle of knitting mittens

Mittens can be knitted in different ways, consider the most common method on 4 knitting needles. Any mittens can be knitted according to this description, both simple, smooth, and mittens with a pattern, simply based on the scheme of the selected pattern.

First you need to calculate the number of loops. This is easy to do, you need to knit a sample, measure the girth of the palm and calculate the required number of loops. On average, for a palm circumference of 20 centimeters, you need to dial 40 loops. The description is designed for this number of loops, but it is easy to adjust it to fit your number.

Prepare the yarn and knitting needles and proceed:

1. We collect 40 loops and, knitting the first row with an elastic band 1 by 1, we distribute 10 loops on each knitting needle.
2. We knit in a circle an elastic band 1 by 1 for several rows. We make an elastic band 5-7 centimeters or according to the idea.
3. Next, we begin to knit facial loops. Some advise making additions here, but they are not needed, especially if the palm is not wide, since the elastic narrows the canvas, and the front rows make the fabric wider with the same number of loops. We knit several rows (10-12) with facial loops until the thumb is formed. In the process of knitting, it is better to try on a mitten for yourself.
4. To form the thumb on the first knitting needle, we knit 1 loop and set aside the next 7 loops on a thread or pin. We collect new 7 loops on the knitting needle and continue knitting in a circle for another 10-15 centimeters, until the mitten reaches the height of the little finger.
5. We begin to round the toe. To do this, we make decreases in each row, knitting together 2 extreme loops from 2 and 3 knitting needles and from 4 and 1 knitting needles until 6 loops remain on the knitting needles. We tighten them with a loop. So we knitted the right mitten. We knit the left one in the same way, only remove the loops for the thumb from the second knitting needle, first knitting 2 loops, then remove 7 loops on the pin, pick up new ones and knit the remaining 1 loop.
6. Now knit the thumb. We transfer the removed loops to the knitting needle and in a circle we collect 14 more loops. We distribute all the loops on 3 or 4 knitting needles, as convenient. We knit in a circle with facial loops of 5 centimeters until the height of the finger reaches the desired length. Next, we knit all the loops in 2, then in the next row again all the remaining loops in 2 and tighten the remaining loops.

Mittens are ready. We hide the ends of the threads and enjoy the result. In order to knit mittens with a pattern of braids or jacquard or lace, you can use this knitting principle and rely on the pattern pattern, knitting it on the front side of the mittens (on 3 and 4 knitting needles). Photos, diagrams and a description of knitting mittens with a pattern with knitting needles will be considered further.

Braid pattern mittens

To work on these mittens, take a set of 5 double-pointed knitting needles and gray yarn with a footage of 250 meters in 100 grams. Type the required number of loops on the knitting needles (look at the diagram) and knit with an elastic band 2 by 2 centimeters 10 or 12.

We make such a long elastic band in order to form a collar on mittens. Then we move on to knitting the pattern.

Berry mittens with patterned insert

To work, you will need a set of 5 stocking knitting needles and berry-colored yarn, wool mixture, with a footage of 250 m per 100 gr.

These stylish mittens are knitted according to the description above, but a strip with a pattern is knitted on 3 and 4 knitting needles. The strip must be knitted according to the pattern shown below.

First, pick up the loops on the knitting needles and knit 12 centimeters with an elastic band 2 by 2. After that, we move on to the front surface with knitting a strip with a pattern according to the pattern.

Loops for the thumbs are set aside, respectively, to the right and left of the strip with a pattern for the right and left hands. The toe is closed according to the description given above. We knit the thumb with facial loops, as described above.

jacquard pattern

Mittens with jacquard pattern look very stylish and fashionable. It is knitted from threads of two or more colors. They alternate with each other according to the scheme of the picture. This kind knitting suit already for experienced craftswomen.

The following are interesting and beautiful schemes with jacquard for mittens. It is important to follow the chosen scheme exactly, then the pattern will turn out beautiful and correct. Using jacquard, you can knit floral patterns, ornaments, snowflakes, curls and even pictures with animals, birds, insects. Jacquard pattern on mittens will be good for adults and children.

Mittens with sewn-on or embroidered pattern

Mittens with an embroidered or sewn pattern look very beautiful and feminine. For such a pattern, threads for knitting or floss, beads, beads, fur pompoms, embroidery or crocheted elements are used.

Elastic band for mittens can be crocheted or made on a drawstring, knitting the first couple of rows with purl loops, then add several loops evenly and knit with front stitch, then reduce the added loops and knit a couple of rows with a wrong side and repeat the formation of the drawstring again.

Mittens look interesting, in which the cuffs are knitted with threads of a different color (to match the future embroidered pattern on the mitten itself) and after that the hem is crocheted with lace. This collar is laid over the cuff and sewn on. After that, the mitten itself is knitted and decorated with embroidery.

Finished products can be decorated with embroidered flowers, knitted titmouse, beads, strings with small thread or fur pompoms and beads.

Delicate, warm, comfortable, stylish knitted mittens - what else brings so much inspiration to needlewomen in winter? Moreover, both the process of knitting mittens and the result obtained at the end are beautiful. Knitting this accessory is quite simple, and it will look exclusive. If you know how and love to knit, and at the same time want to give your loved ones an exclusive gift for New Year - there is no cooler idea than making mittens with knitting needles: a description and diagrams are already waiting for you on this page, as well as exclusive video tutorials.

Beautiful patterned mittens are a unique, and most importantly, warm find for those who like to look unusual. Of course, today almost any thing can be bought in a store, however, for your own model of mittens, you can choose the yarn yourself, choose a pattern and chic decorate your pair of mittens with whatever decor you want. Of course, such a designer model in the store will not be cheap, but you can make it yourself.

Before starting work, you should carefully measure your hand so that your future product looks perfect.

What measurements should be taken before knitting mittens?

• The girth of the brush along the line from index finger to little finger(we lead a centimeter tape along the bones).
• From the beginning of the hand to the tip of the middle finger.
• From little finger to wrist. The length of the thumb is also taken into account.
• We measure distance between thumb and wrist.

Also, for your future masterpieces, you need to choose the appropriate size. There is a special glove size chart for men, women and children.

When you calculate the size of the mittens and measure the palm, you should take into account the thickness of the yarn and the size of the needles. If the knitting is dense enough, then a little more yarn is needed: when knitting mittens with plaits or braids, we take 30-40% more yarn e than required.

Yarn is calculated as follows:

• for women's mittens - 100-120 g of yarn;
• for children - 60-70 g of thread.

The table shows how many loops you need to cast on for knitting certain mittens. We start knitting with a brush and knit in a circle on 5 knitting needles . We knit cuffs with an elastic band- through one front and one wrong loop or 2 through 2. We turn to the knitting instructions for the cuff of the mittens for beginners.

1. Loops we we collect on 2 knitting needles.
2. Then divide the number of loops into 4 parts(equally) and throw on the knitting needles.
3. Row of loops close in a circle and tie the ends threads to each other.
4. The cuffs will be 5-7 cm.
5. After you tie the cuffs, add one stitch on each needle.
6. We knit the main part of the mittens to the area of ​​the thumb.

Knitted mittens with a pattern: diagrams and step-by-step instructions

Now that you know how to take measurements correctly and knit cuffs, you can proceed to consider the scheme of mittens with knitting needles with a pattern.

Beautiful patterns on mittens are not just for women. Men's mittens with a pattern also exist. and they look spectacular and stylish.

Unusual New Year's mittens will give you a festive mood.

Consider more some stylish schemes.

Mittens with braids knitting needles: diagrams and description

In the process of knitting mittens, it is very important to correctly position the thumb. Thumb hole for right mitten will be on the third needle, for the left - on the fourth knitting needle. In the photo you can see a small master class on knitting a finger (one of the options).

1. We knit a hole for the finger. On each needle you have the same number of loops, for example, 12. We knit the first loop on the third knitting needle, and we pin the next 10 with a pin.
2. On the right knitting needle we throw air 10 loops(the same number of loops you removed on a pin). We knit the final 12 loop.
3. We knit in a circle to the level of the little finger.
4. Reduce the number of links: on the first and third spokes knit with perekida 2 loops(beginning), and on the second and fourth knitting needles we knit 2 joint loops for 2 upper shares (end).
5. On every spoke reduce the number of links (through a row), until half of the loops remain on each needle (from the original number). Decrease the number of stitches on each row.
6. When you have 8 stitches left, close the ring and tighten from the inside out.

Knit thumb

1. We transfer the removed loops to the knitting needle.
2. When we knitted air loops, we also got edge loops. We recruit from them new loops in an amount that is a multiple of 3.
3. We distribute the loops on 3 knitting needles and knit in a circle to the tip of the nail. We decrease the loops, as described above (in paragraph 4).
4. We collect the last 6 loops and tie from the inside.

These 2 patterns will help you master the technique of knitting braids.

Here is another option for knitting mittens with a braid pattern - cute owl - for girls.

Elegant women's mittens with flowers can be knitted for free using this micro.

How to knit children's mittens with knitting needles?

Perhaps every mother wants to learn how to knit mittens for children. It's another one the right way give your child your love, care and warmth. Children's mittens are even easier to knit with knitting needles than adults, because they are smaller in size.
Instructions for knitting children's mittens will explain to you all the nuances of the work. This knitting method is considered the easiest and most versatile, and mittens are suitable for a child of 7 years, and for 2 years, and for 1 year (see size table).

And this one children's pattern set will complicate your task a little, but will cause a storm of positive emotions in your baby.

This is what soft looks like cool "hedgehog gloves". From the front, they look pretty neat, but on the back of the hand there are soft “needles” made of threads, and on the fingers there is a muzzle of a hedgehog. This photo shows a detailed MK.

It should also be clarified how to finish the job.

• First way. To round off the toe, decrease the loops at the end and in the middle of each knitting needle. We close the last loops into a ring and pull the thread from the inside out.
• The second way. On the first and third knitting needles, we knit every two first loops with a flip. At the same time, we stretch one loop through the second. On the second and fourth needles, we knit the last two loops together.

And according to this scheme, you can knit mittens on two needles.

This manual contains detailed description, how to knit a finger in such an accessory as seamless mittens.

jacquard patterns also welcome on children's mittens.


Knitted on 3 needles cute fox mittens. Your child will love this cozy new friend.

You are such a beauty you can knit on 5 knitting needles.

Popular today mittens with indian wedge.

Children's mittens with ornaments look simple and stylish.

We knit mittens: beautiful patterns with knitting needles

We continue the interesting topic of knitting mittens and mittens. We have prepared for you a few more ways to knit mittens with knitting needles.

- to stay close to each other.

Despite the fact that the 21st century is considered the century of technology, simple needlework remains popular and in demand. In this article we will tell you how to knit good, high-quality mittens or mittens using knitting needles. The described methods are suitable for knitting mittens for an adult, and for children.

First of all - the material!

You should learn on good, expensive threads, as well as choose the right tools. The most common options for knitting needles are metal, plastic and wood (usually bamboo), and you should stop looking at them when choosing.

Metal ones do not catch threads when knitting, they quickly slide when creating eyelets, while wooden ones are light and smooth, but the process is slower.

For the first time, you should choose an elastic, stretchy thread, which at the same time will provide warmth to the palms. For mittens, there are a variety of yarn options, for beginners it is better to stop at half-woolen threads - they are quite elastic, do not require a special approach, and as a result, they keep their shape perfectly and look beautiful on their hands.

Knitting pattern

Needlewomen have come up with many schemes and patterns for creating mittens with knitting needles, so it is not necessary to have a printed manual nearby - all photos are on the net. The first thing to master with the help of schemes is the ability to dial loops; if you do not master this basic skill, neither mittens nor other items will work.

Usually the rows of loops repeat each other if there are no decorations in the author's idea, so it's easy to learn. The most common knitting pattern is circular, so five knitting needles are used at the same time in knitting mittens.

After that, you need to learn how to knit facial loops, because. the product is sewn into the front and back layers. They differ in density: the loops of the wrong side are completely intertwined with each other, when, like the loops of the front, they follow a certain, even row. If the skill of processing both sides is developed, you can start drawing up a pattern.

Calculation of loops and measurement of hands

The measurement stage greatly facilitates future work. For convenience, you need to measure the wrist, fingers and palm. To create your own pattern, you should calculate how many loops will fit in 1 cm of each parameter.

The result obtained must be multiplied by the length from the hand to the wrist, then divided by a smaller integer multiple of four. For example, the calculations led to 66. The nearest integer divisible by 4 without a remainder is 64, and we take it as the basis.

Finished? Then we move on to the main thing - knitting mittens.

The process of knitting mittens with knitting needles

You need to start the process with a cuff. The number of loops that will be needed to create a tight, good cuff should also be divided by four; the standard length is 7 cm. At the beginning of work, you need to gradually close the loops into a circle, then knit tightly with an elastic band to the required length so that the extreme part of the mittens can stretch to fit the hand.

It is necessary to knit to the hole, from which the thumb will then be made. Already at this moment, it makes sense to move on to the beginning of the pattern, in which one cell will correspond to one loop - it's easier to calculate and not make a mistake.

Having made it to the base of the thumb, it is required to remove several loops on an additional thread - this way the circumference of the finger is adjusted. The same number of air loops need to be dialed, and then continue knitting up to the little finger. To better see how the mitten will look on your hand, you need to periodically try it on.

The edges of the mittens are made with the help of a decrease in two loops, which are tied together. When the number of remaining loops reaches 8, they also need to be pulled tightly with an additional thread and fastened, and so that the mittens do not begin to diverge, the tip of the thread must be tucked inward.

At this point, the base of the mitten should be ready. We remember the hole and return to it: perhaps this is the simplest part - traditionally, there are no patterns or decorations on the small finger. The mitten can be considered finished, the second should be knitted in the image and likeness of the first, but in a mirror image (so that two left ones do not turn out).

Patterns and decorations

Without jewelry, perfectly knitted mittens will look faded, monotonous. To fix this, even while creating mittens, you need to think about what exactly should be on the front or inside.

There are no clear rules, so we turn on the imagination: often ornaments, images of animals, beads and much more are used as decoration, including embroidery with multi-colored threads.

If it is desirable to knit to create an ornament different colors, having thought over the picture on the pattern, then everything else is easy to supplement on the finished result.

Another couple of options that should be used during creation are braids on the front side or mittens. The latter, however, fit differently; there are separate schemes for mitts.

Photo of the process of knitting mittens with knitting needles