Learning to knit V - shaped cutout

This type of cutting of the neck for knitted products is unlikely to come out of fashion. It is used when knitting sports and exquisite models for men, women and children. You can wear a model with such a neckline over the blouse or simply on the body, it is beautifully tie to the handkerchief well-selected to the model.

For a V-shaped loop, the loops are divided in the middle and on both sides of the middle with the help of the slopes form. With an odd number of loops, it is necessary to close the middle loop or temporarily leave it (see the Red Ring in photo 3).

Simple gains are performed directly at the edge, for this, one loop is pulled through another (of which 1 chrome). For the right half of work in every 4th p. To penetrate the row, except for the last 2 p., then these 2 p. Slit together face (photo 1). For the left half of the work, the first 2 p. Slit together with the inclination to the left, that is, the 1st p. Remove, as the front, 2nd p. Peer face and stretch it through the removed loop, then continue knitting the main pattern (photo 1 ).

Disciping loops for faces at such edges is not so simple. Therefore, a 2nd method is recommended, in which the accurate is noticeable, since they are performed at a distance of one or more loops from the edge. For the right half of work in every 4th p. To penetrate the series, except for the last 4 p., then 2 p. Slice together face, finish 1 facial and edge loop (photo 2).

For the left half of the work, start with the edge and 1 front loop, then 2 p. Slit together with the inclination to the left, as described above, further continue knitting the main pattern (photo 2). A sloping track is formed between the main pattern and edge. The accurate, performed with some interval from the edge, may have a sloped slope towards the bevel, then they are decorative cutout design. In this case, knit, as in the previous embodiment, but 2 p., Acclaimed together by facial, and 2 p., Acclaimed with a slope to the left, are changed in places (photo 3). When knitting with some patterns, such as, for example, half-or-patent or patent rubber bands, the cutout does not form with simple lifting, because They fall alternately on the facial or involving loop.

Rebuilt for V-shaped

In this case, it is recommended to perform double-to-blade, which do not do in each 4th, but in each 8th p. In the photo 4, the detail is performed by a half-tar rubber band. For the right half of the work, to penetrate all the loops of the row, except for the last 6 p., Then 3 p. Slit together (\u003d 1 double grade), finish a series of 2 p. A half-tar gum and edge. For the left half start with the edge and 2 p. A half-tar gum, then perform a double gravel, that is, 1 p. Remove, as the facial, 2 p. Slit together and removed the loop to stretch through the accurate (photo 4). If the pattern of the pattern is performed in the middle of the knitted part, it is recommended to use it for the design of the V-shaped cut.

For example, two inclined face loops rhombus serve as the edge of the V-shaped cutout (photo 5). The average "braid" continues on both sides along the cutout sofa (photo 6). Symmetric average motif of a white pullover with p. 23 at the beginning of the V-shaped cut is divided into 2 parts that continue on both sides of the cutout. The accumulation in this model is performed at a distance of 27 n. From the edge.

Baiki V-shaped cutout

When knitting, bays in the middle of the handle must be formed an angle. There is a very simple way to unsubstate bey. Dial on circular or flexible loops on the edge of the cutout (start and finish in the middle of the transfer) and knit the bay of rubber band (alternately 1 facial, 1 wrong) rows in direct and reverse directions to the desired width.

In every 2nd p. At the beginning and at the end of the beaks add 1 p.

The ends of the beaks impose on each other and sew along the edge of the cutout (photo 7). If the V-shaped cutout is deeper, and the bay is wider than in the photo, the decoration of the cutout such as an asymmetric baker is very impressive.

For symmetrical loops, the loop is reduced in the middle of the transfer. Dial to short circular knitting needles on the edge of the cut case an even looper and knit in a circle with a rubber band (alternately 1 facial, 1 wrong).

In every 2nd p. The last 2 p. Before the middle of the passage together with the slope to the left, the following 2 p. Slit together face (photo 8). If the middle loop of the main pattern was closed or temporarily left, then it turns on to the bay. For bay shown in photo 9, each 2-p. To penetrate a rubber loop of a row, except for 1 p. Before medium loop, the following 2 p. Remove together as persons. (i.e., enter the needle from left to right first in the middle, then into the previous loop), the next loop to penetrate according to the pattern and stretch through it removed loops. If the cutout is decorated with a double baker, then first on individuals. The side of the faces on the middle loops perform the accurate, then on the eve. The side of the faces also on medium loops - increases. They knit failed bays, as described above, to the desired width and mark the fold line \u003d a row with hinges. Then, on both sides of the middle loop, the additions are performed (from the broach to recover 1 crossed loop) in the same rhythm as the accurate, until the first hinges are on the knitting. Related bay double width (photo 10).

If the beaker is performed with a rubber band 2x2 (alternately 2 persons. And 2 is elected), then the middle of the transfer should have 2 facial loops. In every 2nd p. To penetrate the hinges, except for 1 p. front of the average 2 p., then 2 p. Slit together by the facial, the following 2 p. Slit together with the slope to the left (photo 11).

If the main pattern is embossed, especially along the edge of the cut, then the processing of edges should be simple and invisible. Dial loops along the edge of the cut, tie 1 p. Elastic (alternately 1 individuals. and 1 is eleg.) and loops close (photo 12). Pullover with p. 23 edge, lined Art. B / N and Pico, emphasizes a romantic openwork pattern.

The treatment of the neck of the crochet is rightfully considered a universal method, which uses many masters to give their product of elegance and exclusivity. Knitted things have always been at the peak of fashion, the XI century is no exception. Tied any thing, each needlewoman wants to improve it, make it irresistible and unique. Most often the choice falls on the treatment of the neck, since this element of clothing is located in the most prominent place and creates the total type of this product.

It is noteworthy that it is not only a knitted thing, but also a product from the fabric. Also, using a hook in action, you can give color to your old things, strengthen the basis of the talessed neck or with this tool to give things a highlight that will become a distinctive feature. This thing can still be used in everyday life.

In the photo below, you can look at things that have been processed with crochet.

Ways finish

The methods of this type of processing there is a great set. We can bind the neck with a narrow border, border, which goes into the collar, or a wide finishing ornament.

The proposed option for processing the neck of the crochet is very well suited to people who only get acquainted with this kind of needlework, as well as experienced craftswomen who have no opportunity to spend enough time to a more complex finish of the neck. There are two options for the neckline, it is:

• round neck;
• the neck, the ends of which are connected by the seam.

From theory to practice

So, let's begin.

In order to perform a crochet processing of the neck of the finished product, you will need: directly the neck of the product, knitting hook, thread and needles.

Take a ready-made canvas, with the help of a hook from the wrong side of the main thread with an exhaust loop on the front side, on this principle, we recruit a little on the hook, a little tightened thread, since the loops should be scored closely.

Now the need for a job on which we move all the hinge on hook, continuing to replenish the number of loops with the hook. With the help of the main tool, pull the loop and throw it on the needle.

That's all. The first part came to its completion. The loops are scored. Smoothly approach knitting the first row. We assign the first row of our product so that facial loops can be seen from the wrong side, and in the face row there were irons. If the product you choose has a round neck, then it is necessary to knit with hinges, if the neck is with a seam, then knit facial loops.

If you wish that the form of the collar of your product is exactly similar to the factory, then the first row must be kept along the wrong side of the facial loops, as a result of which an invalid loop will be located on the front side. Thus, the first row of the front side looks like the collar is a suitable needle. Here is such a result we can get by applying the first variant of the treatment of the neck.

To complete our work, you need to link the neck of the required length. Loop laid can be closed according to your desire, using for this needle or hook, but if you handle a rack collar, then the hinges closed with a needle will look at the product much better.

Let's consider another option to process the neck of the hook. First, type air loops in the amount of fifteen or even twenty pieces to the right left. Start a report from that loop that continues to be on the hook, choose the third. Through the last loop, stretching the hook, capture the main thread, which we start to pull between the threads of the third looting. Thus, on our hook, only the captured thread of the bases and the first loop, which became the beginning of our chain.

Thus, we have formed two columns.

On this principle, continue to process the neck of your product before it is completed. But now the hook should go into each loop. As a result of the acts done, we get a strip, it must be turned over and continue in the same spirit, forming the following series. In each subsequent row, the first loop is removed, not passing it through the main thread so that the canvas gets smooth and without gaps.

Work on the edging of the neck of the crochet will start from the left shoulder. I fix the strapping of the neck, stretching the finishing thread face through the extreme loop. It should work out. Through the nearest looting of the neck and the ears formed, stretch the thread. This led to the formation of a new loop. According to this sample, we treat the whole neck. After each completion of the series, proceed to the new, using the sample schema.

Schemes for the processings of horsepone crochet of any complexity.

A slightly lower is shown schematically several options for processing the neck of the crochet, which can be a good help for you to perform a neck of any complexity.

Video on the topic

The following is a selection of video, with which you can clearly see how to handle the neck with your own hand.

In order to beautifully handle a V-shaped or any other throat (collar) of a knitted product, such as a dress or cardigan, there are many processing schemes. A beautiful kaima can be made in different ways. The spectacular thing looks like such a type of design, like a crochet neck. Take the neck to get a beautiful border quite simple, even a beginner knitter will easily cope with this task. The main thing is to carry out the binding strictly according to the scheme, then the finishing of the product knitted border will be smooth and beautiful.

Numerous collar strapping schemes with crochet can be found in abundance on the Internet and in specialized literature. Beginner craftsmen are encouraged to choose a low level of complexity knitting schemes that are accompanied by a detailed description of the work.

Crochet the edges of the finished knitted product is one of the most responsible stages of knitting. Processing the collar of a beautiful border product - a simple task, but in order to correctly perform the strapping, the knitter must be well oriented in the decoration schemes (know all the conventions) and have an artistic taste in order to choose the most appropriate version of the processing of finished knitting from a variety of schemes.

Decorate knitting decorative border can be different ways, the main thing is that the selected way emphasized the texture of the product. Before starting the strapping, it is recommended to study several schemes for designing ready-made knitting, read descriptions of work and choose the scheme of the strapping, which is harmoniously combined with the shadow and color of the finished product.

To perform a decorative border crossing, you will need:

Hook Hook Processing: General Description of the Process

Before starting the decorative processing of the collar of the knitted product using the hook, it is necessary calculate the required number of loops In accordance with the size of the finished product. Next, you should decide on the color.

The color of the kayma can coincide with the color of the finished product, can have a different shade, but you can also perform a car from the yarn of contrasting color. It all depends on who is intended for clothing (man, woman, child), as well as from Leson. The main condition: the color of the kayma should harmonize with the color of the finished product and emphasize its texture.

The decorative kaima can be born in crocheted in the following ways:

• With the help of the "Watch Steps".
• Using the combination of columns without Nakid and Pico.
• With the help of the so-called "shells".

Of these methods, the simplest option suitable for beginner needlewomen is "Radi Step". Despite the ease of execution, the neck, linked with the help of the "Watch Step", looks very elegant. More experienced craftswomen can choose the original combination of the elements of the "Column without Nakid" and "Pico", the main thing is to strictly follow the scheme and be attentive during knitting.

Gate finish technology using "Shells" quite simple, but requires accuracy. In the first row, the columns without Caida alternate with air loops, and in the second row in free loops, columns with nakidami are introduced, and peculiar decorative elements are obtained, in shape resembling sea shells.

Beautiful crochet neckline: Schemes and practical recommendations with schemes and video

In order for the kyim knitted items to look beautiful and emphasized the texture of a knitted canvase, it is necessary to accommodately approach the choice of the throat of the neck.

Choosing a way of registration, it is necessary to take into account the following factors:

Also, the master should adequately evaluate its hook level. Beginner knitters are recommended to choose the simplest schemes of the neck. Experienced masters can choose the option more comprehensive, and can also improvise based on ready-made schemes.

Attention. The neck and the faces of the product must be decorated in a single style. If the neck and the armies are decorated in different ways, it will immediately rush into the eye, and the finished product will look short.

If a beginner needlewoman does not speak very well, it is possible to separate the neck and armor decorative braid. This option will look good in children's clothing. In any case, before starting to finish the neck of the knitted product, it is necessary to practice in different ways of strapping and choose the most convenient.

The knitted product with a crochet is designed immediately acquired a finished and very spectacular look. The more ways to finish the neck will try the starting master, the greater the likelihood that it will find their brand method of registration of a ready-made garment. The design of the neck with a crochet requires a creative approach to knitting and developed artistic taste. The main thing is to successfully combine the design of the neck with the general appearance of the product.

Registration of the neck of the knitted product with crochet (schemes)

Knitted products are always exclusive and in a single instance, since even one and the same master can make a copy and repeat exactly the drawing of hand-made things. We love them also for the fact that in winter they are warm in them, and in the summer Nezarko. Scarves, caps, mittens, socks, sweaters, pullovers knit needles. Light things, such as weightless dresses, openwork tops, interesting skirts, are made by an uncomplicated tool - crochet. In all knitted products, regardless of the instrument used, edges are necessarily processed. This article provides answers to questions about why process edges and how to tie the neck with a crochet.

What else can hook

Hook-related products are used in interior design, with their help, a unique bucket is created. For example, openwork napkins will decorate a festive table, especially if the tablecloth will be performed in the same technique. Ordinary sofa pillows can be turned into a masterpiece of art, just putting the pillowcase with a fillet grid. Finally, the design of the window with elegant weaves of the viscose thread tied with a crochet is capable of attracting views and give the chic room.

Why treat edges of products?

And how to bind the neck of the crochet? If you made a summer pullover, top or other thing, you need to give it a complete view. The neckline of the neck of the crochet, the bottom, the armies, the sleeves will give additional rigidity, the edges will not be twisted, the integrity of the form will continue. It is also necessary to remember that the stylized and aesthetic appearance thing will only take in the case of using one processing technique.

The edging of the product can be performed continuously, that is, starting with the bottom of the same edge and ending with it, the neck is also processed (see the first photo). The second way of strapping the neck is in a separate study from Niza (pay attention to the second photo).

Where to start the strapping of the neck?

Knitting is a simple science, and it is capable of mastering even a teenager, especially if he has a master Mom. For training you will need thick threads and the corresponding hook - it will facilitate the tasks, and you can see your efforts well. Beginner craftsmen are better to start with the manufacture of samples, they will help you to learn the technique, then you can already apply the knowledge gained in practice. For example, the neck of the neck of the crochet on the finished product is already under the force of novice craftsmen. In order to handle the neck of openwork blouses, for example, the columns without an attachment, you need to learn how to create a smooth cloth. Look at the third image, you see the sample performed in this technique.

How to knit a sample from the columns without Nakid?

1. We start working with air loops that you can score about 20 pieces.
2. Then knit the columns without Nakid to right left.

After the air loops are dialed, start knitting the first row. The hook we spell under the third loop, the hook on the hook is considered (we enter the hook under two threads, one remains below), then capture the thread and pull it out of this loop. There was two threads on the hook, again grab the thread and pull it out of these two loops at once. We can assume that two columns without Nakid are ready. The neck of the neck of the crochet continues in the same way as started, only the hook "dives" is already in every loop. So continue to the end of the row.

Start the second row and subsequent air loop. Then turn knitting and continue in the same vein, not forgetting that the hook is injected under two bases. (Each loop has two threads - the front and rear, here you need to direct the hook under both). You have to get a smooth rectangle or square.

The neck of the neck with columns without Nakid

The sample is ready, after that you can already take the right threads and squeeze the neck of the product. Color You can choose a contrast or tone things. The neck of the neck of the crochet (diagrams for her you see below) begins with the input of the tool directly into the cloth from the front side of itself, captures the thread and pulls out. The hook turned on the hook, then she is captured again and headed into this loop. So the first row on the product, the second and subsequent knit with the columns without Nakida. The difference from the sample is that no need to recruit air loops.

Look at the finished product (fourth photo). The form here is round with the fit, with the gradual recession of the loops. In order for the loops less, it is necessary to alternate the columns without nakidov with connecting. Perform work in a circle, watch the mating to be smooth. Scroll through the product, then fasten the thread so: air loop and trimming threads, then pull it out. For the fortress, you can additionally sew it.

Connecting column: The hook is sent to the preceding row loop. Capture the thread and pull it out through the loop, which is on the hook.

The neck of the neck of the nodules

We continue to study crochet. The neckline of the neck is slightly complicated by adding a decorative element to the already familiar technique. A beautiful neckline turns out when knitting by columns without a nods ends with nodules. To do this, handle the edge several times without a Nakid (see the technique above). The number of rows depends on which width of the edging you need. The last row finish with nodules. So, we start to create. Photography No. 5 shows the scheme and sample. On her points are the air loops, the letter "T" - the columns without Caida, triangles - nodules.

Three air loops with a connecting column combine from the first loop - turned out to be a nodule. (How the connecting column is made, it was described above). Next, after three or four hinges of the columns without Nakid, we again make it. We continue in the same way. Nothing complicated!

Wheelchair technique

The treatment of the neck can be performed in an interesting technique of "Rachi Steps". The canvas is processed in the opposite direction, that is, from left to right, as if the cancer is five. Knitting is based on the columns without Nakid, which is pregnant with the canvas, and the last row ends with this technique. Without turning the material, the columns knit without a nakid: the hook is heading from itself into the first loop, then the main thread is captured and pulled out through two hinges above the work. There should be a ribbed edge - "trail from cancer."

Treatment of the neck of the decoration "Checkbox"

The cutting of the neck of the crochet, the schemes of which are below, can begin and separately from the product. There are various finishes that are used to process edges of clothing or for designing other products, such as curtains, tablecloths. They are manufactured according to the schemes, then they are tied or sewn to the finished product. This edging can be finished the bottom of the dress, sleeves, in our case the neck of the neck with crocheted decoration "checkbox" will be performed.

So, the chain of air loops is recruited, then a number of or more columns are pronounced, only after that you can start creating an elegant decoration. It knits so.

Two air loops, one column with Nakad on the third column without a preceding series, two air loops, three columns with Nakid on a column with an attachment, which just tied up, clasping it three times. We continue in the same way.

In front of the column with Nakid, two air loops are always made, then the column is configured: Nakud threads on the hook, we guide the hook to the third loop of the base, pull out the working thread through this loop, capture the thread and pull it out through the loop and the Nakid. We cling once again the thread and drag it through two hinges that stayed on the hook. It turned out a column with Nakid.

After these manipulations, we got ready finish, now it can be seed or tied to the finished product. Crochet will be a favorite activity, as this is one of the most interesting areas of needlework.

With the problem of processing open sections of products, all needlewomen are facing. Consider, for example, how to bind the neck with a crochet in several ways. Also in gradually we will analyze the proposed schemes of patterns and ornaments to finish the edge.

Options for the neckline

The unprocessed edge can be finished in one of several ways. We list the main options, how to tie the neck with a crochet and decorate the product:

• Narrow border (no more than 0.5-1.5 cm). Unintelligible Cint or Rubber is ideal for lungs, openwork and children's things.
• Kima, turning into the collar (from 5-8 to 15-20 cm). Can be combined with any kind of products.
• Wide finishing ornament (from 1.5 to 4-5 cm). Most often used when placing the neck and edge of the sleeves of pullovers and jumpers from the medium thickness yarn.

Sometimes novice needlewomen do not know how to tie the neck with a crochet beautifully. In this case, you can use by the way, they are used not only to decorate braided products. Conventional fabric dress can be easily turned into a festive outfit, decoring a small accessory. Particularly stylishly looking contrasting details (photo 1). It does not need a neck. The schemes of such removable products suggest acting from top to bottom. That is, at first several rows fit, the first of which will be the edge, and then, following the instructions, a small uniform expansion is performed.

Processing Product Niza, Processing of the armored or sleeves and processing the neck of the crochet in a single style

The same harmoniously looks like the same finish of open sections. Agree that cutting and damping fabric beeke is a rather laborious process. And the use of other technologies (embroidery, macrame) is also quite problematic. Therefore, one of the most common types of needlework is used very often for the design of products that are stitched from the fabric or made by the knitting needles - crochet. The neckline of the neck, especially on Tops, tops, dresses and other lungs (including openwork and nursing) products with an open prugoam or short sleeves, is usually carried out equally. The first row is usually performed by columns without Nakid. And then you can fantasize your taste using different techniques. Then the product will look stylistically finished, neat and beautiful. Let's start with the simplest pattern of "raff", with the help of which the neck crochet is most often carried out. Schemes in this case will not be required, as it will be very simple to perform the text description.

Performing a "Radi Step" pattern

How to knit the neck with a crochet, so that the edge gets smooth and not stretched? Use no simple columns to do this, but an unusual pattern on your technology. Work in this case will be carried out in the opposite direction - from left to right, therefore the name of the mating is associated with cancer, heated back. So, having reached the edge of the canvas and after performing the last loop of a number of columns without a Nakid, do not turn the product to the opposite direction. Enter the hook to the last element of the base, directing it from the front (groaning clockwise 90 °), and the working work, pre-stretched to the left thread through the hole. Two loops were formed on the tool, check them. Then, moving back, perform the "raff" step "to the end of the row. The edge of the product will be in the form of a logging, obtained from the threads lying on the mustache. This finish of the neck can be carried out both the main threads in the tone of the product and finishing.

Description of the schemes for finishing the neck

Consider a few simple, but fairly elegant ornaments, which are performed on top of the pre-row from the columns without a Nakid (in the schemes - a chain of air loops).

Designation ** - Rapport, that is, the repetition of the same elements to the end of the row.

Pattern first:

1 r. - * 2 post. from 1 NA., 1 remote. P.*;

2 r. - * Arch from 4 plants. p. On top of the pillar., 1 post. without NAK. In the Wards P.*;

3 r. - * Fune from alternating 5 pole. With 1 nakid. and 4 remuneration. p. in one arch of the past row, then 1 post. without nakid. to another arch *.

Pattern two:

1 r. - * Pole. with 1 nakid. *;

2 r. - * Fan from 4 pole. With Nakid., 3 Wait. P.*;

3 r. - * In the post. last row 2 pole. With 1 nakid, 3 remuneration. P., Pico from 3 Waards. P., 3 Wards. p. 2 post. With 1 nakid. *

Pattern third:

1 r. - * Pole. WITHOUT NAK., 3 Pico from 3 Rev.. p., Pole. WITHOUT NAK., 5 WIT. n. over 3 loops of the past row *;

2 r. - * Pole. without NAK. In the arches from the Wards. p., 9 remuneration. p. above the Pico group *;

3 r. - * 9 post. without NAK. On top of the Wards p. 1 post. without NAK. in a pillar. last row *.

The simplest and at the same time elegant way of finishing the product "Veter" pattern

Any land will look carefully when using this pretty simple in the design of the ornament. It is not necessary to be a super craftswoman and know all the techniques, how to tie the neck with a crochet. It is enough to learn how to perform only a chain of air loops, and without it. The ornament consists of three rows, but if desired, you can repeat them several times. The result is a wider openwork kaym.

1 r. - On the edge of the canvas, perform the arches out of 5 remuneration. loops (based on 3 loops) and a pillar. without nakid;

2 r. - Repeat the previous row, tieting the pillar. in air arches;

3 r. - Alternate a pillar. Without a nakid (with a similar post. Previous row) and fan in the arch, made of 5 posts: 1 Without Nakida, 3 with 1 Nakud, 1 without Nakid.

Two ways to confuse corners

What is the features of the edge processing in the pattern above? In the performance of rotary lines and corners. Binding can be performed in two ways:

1. In the case when only the main ornament is executed without repetitions, you can rely on the photo above. Then one of the logs will be in the corner.

2. If you want to make an openwork Kaima wider, it is worth a slightly change technology. To do this, when performing 1 row in the corner, make an arch from the War. Loops and columns without Nakid (preceding it and ending it), lie in one loop of the base (in the corner). Then, as a result of the toothed lore, there will be no corner. It will appear after the repetition of 1-3 rows.

Therefore, it is necessary to immediately decide how to tie the neck with a crochet - to make it in the form of a narrow embossed edge or wide border. And only after that plan their further work. Otherwise, the neck will be pulled out with a concave corner connecting it with a plank of the product.

"Second life" neck. Repair of old things

Very often knitted products in the process of socks lose the initial look and shape. In this case, the neck can be treated with the appearance will be fresh and attractive. Spend the assignment as follows:

Sharp scissors cut edging, strapping or collar;

If necessary, disclaim the edge of wide stitches, having turned the tissue into 0.5 cm.

If the fabric has a fine mating, you can not do the flashot with wunting;

Check the first row by columns without a nakid, a little tightened by the Book of Book, they can also alternate with 1-2 air loops (especially when using contrast yarn), retreating from each other by 3-5 mm;

Repeat the work in a circle until the desired width of the knitted beaks (usually 2-2.5 cm).

Execution of openwork Kaima

We will analyze one of the options for tosing the neck, relying on the proposed scheme:

1 r. - chain of air ordinary loops;

2 r. - Alternation of the pillar. without NAK. And the arches out of 3 remuneration. loops;

3, 4, 5 p. - Arch in the arch: 2 post. With NA., 2 Waits loops (3 row), 3 remuneration. Loops (4 row), 4 remuneration. loops (5 row), and in a pillar. Basins - 1 post. with NAC.;

6 r. - Speed \u200b\u200bin the arch 9 pole. C 2, alternating them with 1 post. from 1 NAC. in the base;

7 p. - Singing in the first pillar. Basis 9 pole. With 2 Na., Alternating them with 1 remuneration. The loop, in the intervals between them - the execution of 2 arches out of 4 places. loops;

8 r. - On top of the arches from 9 pole. with NAC. Performing 4 arches out of 3 places. loops, and on top of the arches from the remuneration. Loops - spinning post. C 2 NAC.

You can slightly interpret the proposed pattern, finishing the work after the execution of the 5th row. Another, more compact openwork variant - pecking 5-8 rows with a mandatory arched edge.

How to tie the neck with a crochet in the shape of an openwork coquetki?

In some cases, work on the open edge finish is performed in the reverse order. This means that the openwork coquette fit first, and then all the product. This option is most often used in the manufacture of models with round finishing parts. If the coquette must be square for a simpler connection with the main web, lead in four places. As a result, it turns out angle adjacent on one side to the armor, and on the other - to the top horizontal lines of the shelf and the back. At the same time, many products differ not only on the technology of performing various parts - openwork coquette and the main canvas made by a dense conventional viscous - often use various materials. Now it is very fashionable, for example, at the Silk Blouses to make openwork coquetk. Or knitted Cardigan knitted with a lattice collar.

Registration of the neck of the fabric products with the hook

Such knitted edging looks very fashionable. But, unlike knitwear, the fabric is quite problematic to handle crocheted. What recommendations should be adhere to to get a beautiful neck?

Use the knitting tool with a pointed tip for easier piercing the web.

It is desirable that the structure of the thread and tissue coincide (for example, wool yarn will suit the drape and the same canvase).

Preliminary treatment of the edge with an inner bending is required.

Of course, not all needlewomen gets, and do not everyone know how to toss the neck with a crochet beautifully. But for sure the advice and descriptions of the schemes and patterns given in this article will help make the finishing of products stylishly, originally and neatly.