Universal home clothing can and should be aesthetic, individual and interesting. Therefore, it is worth spending time on its independent manufacture. Excellent option Such clothes can be called a bathrobe. Practical and comfortable, it will help in creating a coziness "At the family hearth". Among its advantages is a variety of styles and ample opportunities for decorating.

The bathrobe is a shoulder clothing, which is fastened from the neck to the bottom of the product on the buttons or with a splashboard. Covers the torso and feet partially or completely. This subject is considered to be clothing for home and recreation, does not have sexually agreed. He is worn by men, women and children. A variety of female roda is peignoir.

Experienced masters create even fantasy products made of silk and satin fabric, decorate their lace, frills on board, folds along the neck, make the cuttings and cutting coquettes. The result is a designer model. But even having a little experience in the sewing, you can construct the individual pattern of homemade bathrob and make a convenient and presentable thing. There are many simple styles for which the labor-intensive drawings are not required.

Most bathrobes are designing a classic dress-based dress, adjusting it in size by adding the necessary parts (cuffs, belt, hood). Home clothing is good because it does not require hard canons - you can trust your alarm and fantasy. From mandatory stages - for example, the calculation of the fabric. The amount of matter is adjusted to the amount of breast (especially if it exceeds 100 cm), the shape of the sleeve, the freedom of plantation.

WalmartImages.com.

The history of the emergence of Kolata.

In modern fashion, the bathrobe became a homemade wardrobe, which is put on after taking the soul and for a relaxed rest. It became primarily the personification of elegant female underwear and the subject that put on the wet body.

History of Kolata began many centuries ago in the east. The name has Turkic, Arab origin and means "clothes." It was usually the upper men's splash clothing that protects against all adverse factors: Heat, wind, cold.

Pinterest.com.

In Europe, bathrobes traditionally put on houses as an intermediate stage between lower lobe For sleep and clothing for exit. This type of clothing was more important in the higher layers, it could take breakfast with the family. The peasants, of course, did not have similar homelings.

Types of Khalatov

A variety of cut, similar to the eastern robe, is the Japanese clothing of kimono. Some modern models of home clothing and peignoirs for the prototype took this historical type of product with wide sleeves. Kimono robe is always without a fastener, but has a wide board and tie to the belt.

Prom.st.

There are also bathrobes from themselves special clothing: for physicians, laboratory, cooks, workers. Each profession has its own standards for overalls as a uniform. For example, a kitchen worker bathrobe should be white, a bathrobe of the technique - gray or black, a loader brew or a warehouse worker - blue.

The most comfortable and common model for home socks is a robe on the smell. Free silhouette does not constrain the movement, the winding wide board gives freedom of step, the lack of a fastener makes it easy to remove and wear it.

Such a model is worn without restrictions. An option from silk will suit girls who love long breakfasts and weekends at home. A shortened product from a dense velvet, cotton gabardine, silk will enjoy men who work at home in the office. Traditional terry bathrobes are worn after awakening and taking adults and children regardless of age.

zara.net

Pattern of homemade robe on the smell

To independently sew such a product, you need to understand how to build a pattern of a classic female robe with a smell. The model is made of flowing satin tissue or not very thick terry fabric. Freedom of plantation allows you to use almost any database for further modeling. Based on the construction taken construction shoulder. It can be a database database, blouse, even light jacket with a soft line of shoulders or coats.

McCall.com.

1. On the existing base, it is necessary to expand half horizontal dimensions to the size of the semi-cuddle of the chest + 8.0-12.0 cm. The increase depends on the model and the selected tissue.
2. Lower a straight vertical line through the widths along the breast line, waist, hips, to the line of Niza.
3. Close the breaststuff. Level shoulder and talio tanks.
4. Lengthen the line of the shoulder slope to 15.0-18.0 cm.
5. Lower a new, hidden armor, deepening it up to 25 cm or more.
6. On the basis of the sleeve to make modeling. Expand it across the entire width in accordance with the model.
7. Build a new OKAT sleeves in accordance with the length and form of the premium.
8. On the shelf to carry out modeling for the design of the line of side and smell. To do this, hold a line from the bottom of the neck to the corner of the waist line / side seam. Depending on the model edge of the side in finished video It can reach the side seam or be slightly shorter.
9. Arrange a new line of the neck, with the transition to board.
10. Depending on the model, draw the design of the board and the neck. The edge of the side and the neck can be treated with or a hood or a sled collar, moving to the weld, or a decorative edge equal to the width of the removed belt.

kroikashitie.ru.

Design of sleeves and details

In the coats of traditional models use swap sleeves. They are designed on a single-shift pattern, copying the contours on paper. Length is adjustable in size and desire - as a rule, it is 7/8 according to the basic scheme. On the sleeve you can make a postponclock or socket. It is necessary that its length is equal to the width of the finished element, so it is better to paint it after fitting. For postponed species, there is an allowance to 1 cm to ensure freedom of fite. If the tissue is volumetric, additionally deepens the prugma.

To calculate the length of the belt, it is necessary to measure the waist girth and add up to 50 cm on the zeeping. So that the left shelf has not saved, additional ribbons make in the seam for the weld. The invoice pocket, like the belt, is cut out separately, sprawling the angles at the bottom, and are appared 12-15 cm below the waist. A hood in a bathrobe is more often a decorative detail, but you can replace the collar. The long side is equal to the neck on the back plus two lengths of the top of the shelves, and the short - shoulder height plus allowances on the seams and free fickling.

Without pattern, directly on the fabric it is possible to simulate a dress-gown dress. The cut of the chosen matter is twice as well, forming the median axis of the back to the bending. From it there is a segment equal to ¼ of the circle of the chest with an increase in fuel freedom and seams.

Progress

1. Conduct and cut the neck - behind 2 cm, from the side of 7 cm.
2. Build a line on the shoulder with a twist 2 cm.
3. Correct the shoulder lengths on the back and before - they must be equal.

So that the thing is not a narrow in the chest, there is a science in this zone - fold or assembly. If the belt is assumed, it is cut from the main fabric, cutting off at the bottom of the web.

edinstvennaya.ua.

Bathrobe - traditional cozy clothes for the house, which is easy to sew with their own hands. Simple design and cut do not require deep knowledge and special skills. Pick up a quality tissue, you can create a product that is worn not only after the shower, but also as a comfortable beautiful clothes for home.

Good afternoon, dear readers!

Planning to sew a new barbecue? I offer you a simple comfortable model with a smell and tell you how to sew a robe without pattern.

For those who are well and sewing a lot, sew any clothes, especially a robe - is not a problem.

This article will be useful for those who own the most elementary sewing skills: knows how to keep a needle with a thread and make a line on a sewing machine.
First, let's indulge as we dress at home? Tell us about it in the comments.

I think that a woman is mom and wife, and at home should always remain a woman with a capital letter, respecting and loving and self, and members of their family.

And at home you need to look enchanting, beautiful, tidy, well-groomed, stylishly dressed. No stirable bathrobes and sports costumes, night shirts and pajamas especially! Preference must be removed comfortable and beautiful. home clothing - Pants with T-shirt, skirt with the top and others.

But home bathrobeiK we still need to throw it in the morning and get into the bathroom, from where we leave the Korean!

And in the evening, after receiving a bath, women's bathrobes will be useful to us.

Let's try to sew a bathrobe with your own hands.

How to sew a robe with smell

I like a comfortable model of female kolata with odor, quickly planted and tie, nor buttons do not rush, nor zipper is stuck.

The proposed model for which I already 4 Kolata sewed, but always different, even patterns do not require!

Material can use any, but best soft fabric Type of knitwear, such a satell robe can be slightly complete.

How much material will need

With a width of 150 cm, you need to take a length equal to the length of the robe, and with a width of 75-80 cm - twice as much.

The homely bathrobe with the smell of the proposed model can be sewn any size to 52-54. For large sizes, you will need to make additional inserts.

Cutting a coat

The narrow tissue is folded in half across the inside inside, we fold wide cloth in half along the inside inside.

If the cloth is wide, robe sew almost without seams, only the shoulder seams will be, and with a narrow tissue on the back it will be necessary to make a straight seam. In this case, we retreat from the edge of the fabric to the left of 1.5 cm and black the seam line.

I draw your attention that the photo shows not the pattern, but a schematic image of cutting a robe, sizes on it not real size.

I give explanations on the discollity.

Line of the neck

From the side of the future back (left) from top to bottom, we retreat 1.5 cm for the seam and 2 more cm - note the depth of the neck.

From the left to right above the 9 cm - the width of the neck.

Connect the marked points.

Width of Kolata.

The width of the Kolata is calculated as follows: the hip circle (OB) is divided by 2 and add 20 cm.

For example, about \u003d 110cm, the calculation: 110/2 +20 \u003d 75.

Memore from left to right width of the robe - 75 cm. For sizes from 48 to 54, this will practically be equal to the width of the material. For smaller sizes, cut off the excess tissue on the right.

Shelving line

On the right on top of the downstream 1.5 cm on the seam and the length of the shoulder to the waist (in my case -48 cm)

From the right left from above, measure 9 cm - the width of the neck.

We connect the marked points of the smooth line, you can use patterns, but without it it is quite easy to do.

Line of Pruraim

Exactly in the middle of the fabrics from top to bottom dumping the width of the armhole (1.5 cm on the seam + 24 cm) and cut the cloth along this line.

Line Niza

The line of Niza and measured almost no need if the tissue is taken in length equal to the length of the robe. If there are more fabrics, then dump the length of the robe and the straight line of the nise.

Strip a bathrobe on the marked lines.

From the remains of the fabric, I also sewed a beautiful tack in the form of a heart.

How to sew a robe

Strip the seam on the back ( if it is with a narrow tissue), process seam zigzag.

We spread the fabric and fold the back of the face to before that the shoulder lines are combined. Impair the shoulder seams, process them with zigzag.

You can pre-make fitting!

A robe with a smell and low-sleeved kimono sleeves is almost ready, it remains only to handle edges and embellish.

The edges of the sleeves, the neck, the shelves and the Niza Kolata, I love to separate the oblique baker.

You still need to carve out and sew two halves of the belt and make a slot to him on the right side of the waist.

This robe with the smell turned out, pretty quickly and easily.

How to sew a bathrobe without pattern, we figured out. Just and quickly, isn't it?

If you wish, you can sew along the edges of Ryushi, sew pockets, collar, make long sleeves.

Such a bathrobe is very universal: it can be tied, smelled, and can be used as a peignoir, knit front.

You can sew a terry bathrobe for a bath for such a principle. Variants are many.

Did you like such an idea to sew a home dressing robe with your own hands?

If you have questions, write, with pleasure everyone will answer and help.

Even easier, you can try to sew a robe on the principle. Come see the master class.

About new ideas for the house of publication ahead. Watch out for

There is nothing better than stuffing hot summer days at home or at the cottage in light clothes. Spacious, breathable, comfortable, - it must be in the wardrobe of every woman. The most common view of home women's clothing in summer period is a favorite bathrobe. To wear such a new job will be all summer, but sew a robe with a fastener of a loop and buttonsyou can, while spending only 2 hours of time.

How to cut a home bathrobe

In order to cut the robe, you need any experienced practicing pattern of the shelf, back and sleeves female blouse, dresses or jacket. It can be printed by using a specialized disk with the cutting program or from the site on the Internet, and you can build yourself.

You can use the pattern of the night shirt (48-52 r. R.), See and on its basis to simulate the bathrobe.

Pre-shredded fabric need to be folded in front of the face inside, to decompose all the details of the cut, add length if necessary, as well as inserts on the seams, and cut.

The robe of the most simple cut has the following details of Croy: 2 shelves, back, 2 sleeves, 2 pockets, collar. On the shelves there are all-circular planks under the cabin.

How to sew a homemade bathrobe with a loop and buttons with their own hands, master class

Sewing a robe should be started with the workpiece of the shelves. One-piece planks need to be found at first by 6 cm, and then, bent in half, it is sinking this fold.

With this processing, the necessary rigidity of the slats is achieved with a thickness of an additional layer of tissue, you do not need to duplicate the bar.

The upper pocket cutout should be fed by 4 cm, and then adjust the fold on half and triggered.

On each pocket, the finishing line should be paved along the bent bent, as well as to spend and start a 1 cm in the side of the outline of 1 side slice, and at the same time lower cuts. Pockets will be located on the right and on the left, so it is necessary to draw up right and left side sections.

Harvested pockets need to be touched on the shelves, applying unintended sections to lateral sections of parts. The top edge of the pocket should be located on the hinder line, the raised side side must be parallel to the side of the side. The unintended side cut of the pocket can be slightly exit the side cut of the shelf, it can be cut. In the corners of the pocket, you need to push the scope to avoid breaking the pockets during the operation of the bathrobe.

The harvested shelves should be stuck with a back of the shoulder and side cuts, the seam allowances to spend and start the back of the back.

Then the bathrobe must be knocked or leafed by pins for the Esnor. This operation is needed so that all sections of the products are symmetrical, and the Niza line turned out to be smooth and beautiful.

The bathrobe must be made on the prummam, the neck, board and the bottom. Chalk need to draw a new line of Niza, according to which the product will be hardened.

After the protection of the thread of the mixture or pins are cleaned.

Then you need to pull the corners of the planks on the bottom of the product, and the bottom of the nose is wound.

Prepared sleeves should be swam in the loader. For convenience, you can pre-hold them, combining control signs on sleeves and runts. Swiss allowances need to be wrapped and snowing down the sleeves.

The next step is to prepare collar. To do this, it must be duplicated, pull it out of its ends. Corners' ledges Carry close to the line.

Then the collar must be turned out and rest.

The finished collar must be swap in the neck of the product, the seam allowance to wipe and snow around the product.

Then it is necessary to give a finishing line along the edge of the plank, simultaneously lay it and on the bottom of the product subsidized to 1 cm.

After that, on the planks you need to wash the loops, sew buttons. The finished bathrobe should be rejuvenated.

Did you like the master class? Then go to our section and choose the next idea for sewing!

Cozy, warm and soft bathrobe - one of the essential and beloved things in our wardrobe. Now a huge selection of fabrics for this product. Of course, each needlewoman wants to sew them with his own hands, in his taste, a unique terry bathrobe for himself or his loved ones. And it's not scary at all, if you have not yet confidently sew. In my opinion, the bathrobe is the thing on which the newcomer in sewing can produce its experience. No need to be afraid to start sewing new things that are more complicated than you sewed before. Important is your desire to learn. I am sure that you will succeed, because the bathrobe is not at all difficult to sew. For him, you do not need to have an ideal pattern and it does not need to do complex and perfect lines. Bathrobe is a thing for your convenience and in it you have to rest. It should be free, pleasant to the body, not straining coloring and most importantly - comfortable.

On your site I offer the pattern of a classic bathrobe with a collar with a sock without side seams, which significantly saves fabric. This pattern is universal. It can be sewed both female and a male bathrobe. Everything will depend only on which side you will smell. For example, on a female bathrobe, the smell will be on the left side, since women's clothing All fasteners on the left side. On a male coat, the smell will be on the right side, as well as male clothes The closure is always on the right side. Pocket on bathrobes with odor usually make one. If the bathrobe is female, then the pocket will be on right side And accordingly, on men - on the left.

How much to buy fabrics on a bathrobe.

Calculation of fabric consumption is approximately like this: measure its product length + measure its sleeve length. So much and it will be necessary to fabric with a width of the fabric 150 cm. This is from 44 to 48 size. On the big sizesStarting from the 50th you need to buy 2 lengths of the product. I needed 2.20 m fabrics.

My size of my pattern is medium - (52-54) - standard, Russian size. You can "fit" pattern under your size:

1. If you know what size you wear clothes, then to reduce the pattern to 1 size, you need to reduce the width of one half of the back and one half the shelf per 1 cm. If on 2 sizes, then reduce 2 cm. If you need a large size of a bathrobe, It is necessary to increase the back and the shelf in the width in the calculation of 1 cm per size. Accordingly, change the size of the shoulder seam.

2. I also advise you to measure my volumes: hips, waist and chest and compare with pattern size. Here you need to take into account the width of the smell (you can make a width to your taste) and the fact that the pattern is given on half of your volumes (the middle is indicated). You can also change the width of the shoulder. In my pattern of the shoulder seam on the bathrobe laid.

3. The length of the product must be each of its own, it depends on growth. My pattern - 120 cm. To measure its length of the product: It is necessary to measure the distance from the base of the neck and down to the desired robe length.

4. Sleeve length. Measure the distance from the bottom of the neck on the shoulder and down the hand. Compare the result with the pattern. Correct under your length.

5. The smell width on my pattern is 12-15 cm (as the pattern will fall on the fabric). If you wish, you can smell to increase at your discretion.

Cut.

When staring is important to place the details of the pattern in the right direction of the filament of the fabric. The bulk of the robe, the sleeve and the weld - everything must be painted on the equity filament of the fabric.

When walking on a terry fabric, where you do not draw a line with chalk, you can need to stick the patterns to the fabric to the needles and, leaving the seams on the seams of 1 - 1.5 cm to cut immediately. For convenience, I recommend immediately mark the place for your pocket. You can pin it with a pattern.

See my video lesson on cutting.

Craw details.

1. Main part of the bathrobe - 1 pc. (combined shelves and back)

2. The weld, turning into a collar Schall - 2 pcs.

3. Rear lower collar - 1 pc.

4. Sleeves - 2 pcs.

5. Pocket patch - 1 pc.

6. Belt - 1 pc.

7. Blind - 2 pcs.

8. Loop - 1 pc.

SEWING.

The open process of sewing a female bathrobe from a terry fabric, you can look at my video lesson:

1. Step on the sewing machine, the shoulder seams, sleeves and elements, turning into the collar Schall (it will be the middle of the back). You can immediately damage the back, the bottom of the collar to the neck of the back and to the selection of the shelves.

2. Processing the edges on overlock or zigzag stitching On the shoulder, sleeves, the outer part of the weld, pocket (top). You can immediately prepare loop and loops. For this, small pieces of fabric are twice and immediately process the edge. Length loop - 8 cm, loop length - 11 cm. Width 1 - 1.5 cm.

3. Snake the edge of the pocket and run the pocket on the product.

4. Put the weld to the main part of the bathrobe, ranging from bottom and in a circle: the weld, collar, weld. Complete the middle of the back and seam on the selection - collar.

5. Disinteb the bathrobe on the table, turn out and put the welded, to be chopped with needles.

6. Entry processing at the bottom of the product. Cut the bottom of the chapter to the main part of the robe at a distance of 3 cm from the edge, cut off the seam and twist.

7. One line can be filled out the second part of the weld. In place of the middle of the back, do not forget to insert a loop-hanger.

8. On board and collar. Shot along the edge, on the front side, the weld and collar sock at 0.7 - 1 cm. From the edge of the product.

nine. . I advise you to combine the highest point of the Oak Sleeves with the shoulder seam and combine the suture of the sleeves with the place where the side seam should be and brake all the break with the sleeve. Switch the sleeve on the typewriter.

10. Process on overlock of the armor, bottom of the product, bottom sleeves.

11. Production belt. FROM invented side Make around the edge of 0.5 cm. In the middle, leave a small penetration hole. Unscrew the belt and with front face Hand manually or firm on the typewriter.

12. Fitting item. Pay attention to the length of the sleeve. Turn and tap needles. The right length of the sleeve is to close the bone on the zyadysta hand. Mark the places for the bump.

13. Sew sleeves. Slut bump on the waist line, in the side of the side seams. Wear a belt.

The terry bathrobe is ready!

Olga Kostina

The homely bathrobe is an important component of the daily wardrobe. He is glad to wear children, women, and men. It can be thin and sexy or warm and soft, it is convenient to shit in it after the bath or throw on top of the pajamas in the morning. Many shops various models, But if you have time and desire, you can easily sew a robe.

Where to start?

Sew home bathrobes do it yourself not so difficult. This is the case forces even a newcomer. To perform work, you must be able to use sewing machine And have the minimum seamstress skills.

In the process you will need:

• The cloth;
• Tape measure;
• Scissors;
• Number;
• Threads and needle;
• Sewing machine;
• Iron.

When choosing a fabric, consider the purpose of the product. Kimono and Summer Klakat are sewn from silk, sitz, bath and winter hoods of their terry, flannel and woolen fabrics. Models can choose different, but the most simple in the sewing products with the smell.

To calculate the required amount of matter, you need to decide on the style. To sewing a sleeveless robe 46-48 sizes from the tissue with a width of 150 cm, you will need 1 length of the product + 2 cm on the binder, at 80 cm, 2 lengths will be required. But for the product with a long sleeve of matter, it is necessary more.

Cutting fabric

How to sew a bathrobe with their own hands? Before applying marking, the fabric must defill so that there is no chances. Finished matter spread out on a flat surface. A wide fabric folds in half along the longitudinal line of the face inside, narrow - on the transverse line. Next, shallow or piece of dry soap apply markup.

On narrow matter on the left side, retreating 1.5-2 cm, swipe the line down - it will be the seam on the back, it is not necessary for a wide tissue. Build a dressing of a dressing room more convenient from top to bottom.

From the left edge, go down 1 cm - this is an indent for the line, from this place to the right to spend a straight line. On this horizontal marker from the fold to the edge, measure 9 cm, and come down 2 cm from the left corner and set the label. Smoothly connect these two points. This is a neck of the back.

The width of the Kolata will calculate according to the formula: CC + 20 cm, where the semi-seasure of the hips. Calculate the value to put on the right of the fold. At this point, the draw is straight from top to bottom. It makes the front cutout on it.

To do this, it is necessary to measure the distance from the shoulder to the waist. Set this value on the built direct. On the top horizontal line to the left from the edge, mark 9 cm, and put the point. Now smoothly connect these two tags.

It remains to make arm for arms and cut the items. Upper horizontal direct divide in half. From this point down on 26 cm Draws straight, it will have to make an incision. Scissors carefully cut the parts along the lines.

Sewing Kolata.

Sewing the summer bathrobe with their own hands specialists are recommended in such a sequence:

• The edges of the fabric are treated on overlock. If it is not, processed by a zigzag;
• Then sew the back;
• Before and back to face the face and, alive on the shoulders, make the back, then step up;
• Over the edges of the sleeves and bottom, proceed and encircle, if everything is fine - boldly strain;
• Oblique baking or finishing material process the edge of the transfer and the neck;
• From the remains of the fabric, the belt is cut.

A robe, stitched with her own hands, ready! It remains to stroke it, remove the backbone and you can wear. Sew the bathrobe to the child, too, just for this fit ... terry towels!

Bathrobe baby from towels

For a child to sew a little easier. First, the dimensions are small, tissue consumption is less. Secondly, patterns are simple.

Send a children's bathrobe with your own hands from old things or bath towels. To build a pattern, fold the cloth to the insanity outside and decompose on a flat surface. Measure the towel width and divide this value in half, get a central line (axis of symmetry). To the left and right from it at the very top measure 5 cm - this is the width of the neck. On the back, go down to 1 cm down - this is the depth. Seamlessly connect points.

On the symmetry axis, measure 15 cm and set the label. From the extreme points of the neck of the neck to the mark on the center line, swipe straight. It will be a cutout on the chest.

From the fold line along the edges of the down, step 20 cm, this will be the width of the sleeves. Children's balachon can have arbitrary sizes. In order to calculate the width of the Kolata, you can use the formula: CC + 10 or 15 cm. This value divides on 2 and postpone the obtained centimeters to the left and right from the central line.

Up from these points, spend parallel straight. Perpendicular to them to lose line by connecting the width of the sleeves among themselves. At the intersection point on both sides (in armpits) smoothly round the corners. Pattern ready. It remains neatly cut and you can proceed to the leisure.

To sew such a kamono robe with their own hands to start the corresponding stitch, gooche, bottom bottom, front strips and the edges of the sleeves. Examples of a bathrobe on a child, take all these places for the typewriter and pull out extra threads. Finishing ribbon Treat the neck. From the remnants of the fabric, make the belt. The product is ready!