Every woman spends a lot of time and money on caring for her appearance. Her calling card is not only her face, but also her hands. And it's hard to imagine them without a beautiful manicure. Today, there are many ways to decorate your nails. And one of the latest trends is stamping art. This is a great solution for those who are not ready to spend a lot of money and time on a manicure. A standard set of tools will allow you to abandon expensive salon services and put your hands in order at home.

Stamping literally translates as stamping. This is a kind of nail art technique that allows you to apply any pattern on the nail plate using special tools.

Benefits of stamping

Simplicity. The procedure for drawing a picture is completely simple and allows you to decorate your nails with any pattern.

Effectiveness. Such a home manicure is in no way inferior to a salon one and looks very decent, as if it was done by a real professional.

Rapidity. Stamping doesn't take long. In just 30 minutes you can create original design nails.

Wide possibilities. Stamping allows you to apply the smallest details on your nails, which are difficult to do by hand.

Nail Stamping Kit

Nail stamping at home involves the use of a special kit. For the whole set you will pay about 500 rubles. It includes two varnishes, a scraper, a stamp and a disk with 8-10 different prints. An abundance of images allows you to put anything on your nails: a tattoo-style drawing, a national flag, a floral print. The rubber stamp allows you to transfer the pattern from the disc to the nail plate. A scraper is needed in order to remove the remnants of varnish from the disc and align the image.

The polishes that are included in the stamping kit differ from the usual ones in a brighter, dense shade and thick consistency. This allows you to create clear and expressive drawings.

Nail preparation

Before you do a manicure, nails need to be put in order. Make a relaxing hand bath by adding sea salt and a couple of drops of aromatic oil to it. Then process the cuticle and use a nail file to make a certain shape of the nails. By the way, stamping on short nails looks more stylish.

How to stamp

1. Degrease nails with a cotton pad soaked in nail polish remover to improve contact nail tissue and decorative polish.
2. Cover your nails with base polish and wait until it dries completely.
3. Take a disc for transferring a pattern, remove the protective film and evenly apply a thin layer of varnish on the engraved print. Do not go beyond the image area.
4. For a print, any shade that differs from the main color is suitable. Manicure can be done in one scale, or you can play with contrasts. The black and white combination looks the most impressive.
5. Use a scraper to remove excess varnish so that the paint remains only on the engraved pattern on the disc.
6. Firmly attach the stamp to the disk with the image and hold for 2-3 seconds. Do not move your hand so that the drawing does not smudge. As a result, the print should be clear and have a rich color.
7. Having fixed the print well, press the stamp on a certain part of the nail plate to transfer the pattern. Before applying the image to other nails, clean the stamp from the remnants of varnish with a special liquid. By the way, the print can be applied not to all nails, but, for example, only to nameless ones, and the rest can be left simply with a base coat.
8. Fix the coating with a layer of clear fixative varnish.
9. After finishing all nails, remove the remaining varnish from the skin around the nail plate so that the manicure looks neat. To do this, a cotton swab dipped in nail polish remover is suitable.

Stamping is yours nail salon within the walls of your home!

One of the simplest areas in the selection of nail design and its implementation has recently received a sonorous name - stamping. In Russian, stamping is a stamp or imprint of the selected pattern, transferred to your nail and then, as usual, covered with varnish or other coating. Its difference from the usual one is that for stamping you need to purchase in advance necessary tools- clichés or plates and a stamp. On one cliché or plate there are many different patterns united by one design idea, which means. that you have a real chance to come up with a unique one by combining different patterns and colors. Fantasize and you will create an amazing and unique manicure that no one else will have.

Stamping. Not so hot, but for the first time and 16 years is OK.

The main thing is not to be afraid, everyone gets stamping the first time. At the same time, it does not take much time, unlike the classic nail art, while it is distinguished by original design and low cost.

To get started, get everything you need for stamping:

Prices for stamping kits.

This is how stamping discs (cliches) look like.

The stamping design depends on the set you choose. The higher its quality, and, accordingly, the price, the neater and more beautiful the final design will be. Prices are very different from 80 rubles for a cliché to 900 rubles for a stamping kit, which includes all the components you need to work. It is better to purchase a stamping kit at any nail store, you can, of course, order from a catalog via the Internet, but in the photo the selected pattern may seem somewhat different than you expect. These are the inevitable costs of Internet commerce.

Stamping technique of applying to the nail.

As always, before transferring the selected pattern to the nail, do -, file the length and sand the nail.

For self-application, you can not do without the following varnishes: base for drawing, for covering the drawing and transparent varnish for fixing the stamping.

The first stage in the technology of self-stamping on the nail.

Apply - we have covered the technology more than once on our website. It is better if you apply two layers and let each one dry well. Just do not use means to speed up the drying of varnishes. Natural drying for stamping is best, and do not forget that a special varnish is required for stamping.

Second phase. On a cliché, disk, stencil, choose the one you like. We apply varnish to the entire surface of the picture, using a scraper we remove excess varnish.

Third stage - nail drawing technique .

We print the selected pattern with a stamp and transfer it to the nail. At this stage, you should not rush, we slowly roll the stamp first over the disk or cliché, and then firmly, but gently press the stamp to the nail.

Fourth stage. Before moving on to the next nail, remove the remaining polish from the cliche with a special liquid and a swab.

Fifth stage, final. Let the nail design dry well and only then apply a clear varnish on it as a top coat.

The drawing is ready as you can see, learn how to do stamping yourself On the nails is not difficult, the main thing is patience. And one more piece of advice, it is better to choose a set for learning stamping from the middle price category, the quality of materials and especially the tool when stamping plays a decisive role.

With the advent of stamping amateurs home manicure a new wave of inspiration covered: finally, an easy one appeared, and most importantly, a fast one! - how to apply on nails exquisite patterns! Now not only those who are fluent with a brush will be able to have an excellent manicure, but also those who are not at all familiar with artistic painting will create complex, original patterns on their nails! And it takes a minimum of time!

In addition, stamping is named by experts as one of the best of the year.

Stamping manicure: symmetry, precision, sophistication!

Stamping technology is based on the ability to make drawings, patterns, prints on nails using a small stamp. Most likely, the idea of ​​banal stamping with ink is taken as a basis. Only the tools and materials are slightly different. The technique made it possible to push manicure stickers far back. And all tools and materials are available for sale for every woman. Moreover, the price for them is not so high, given that now there is no need to rush to the salon and design for fabulous money! Any woman can master the technique of work. Now complex patterns are easy to make! Let's start the story in order!

Stamping Kit: Fantastic Five

What tools are used for stamping?

What tools are needed for stamping?

• Standard base for varnish and fixer.
• Colored varnish for the main background.
• Plain varnish of the chosen color for drawing drawings.
• Acetone or other HDSL, but without oil content.

In the process, you also need napkins and lint-free cotton pads.

Konad kit: everything you need in one package

The easiest way to get all the tools and tools "in one fell swoop." This opportunity gives, for example, Konad. It is especially recommended to use it for beginners who may experience difficulties in technology. Experts say that all components of the set are of very high quality. It is these kits that will hone your stamping technique. You will definitely not be able to apply a complex beautiful drawing the first time, but you can be sure that you are using the right means. It remains to correct the errors in the work. But we will try to give you the maximum number of tips that we overheard in the masters nail service.

The Konad set consists of five metal plates, each of them has 4-7 small drawings. The scraper has a smooth working surface without notches or cracks. There are no complaints about the quality of the stamp either. There are also three polishes in the set. The density of funds is optimal for work! And this is very important! Konad stamping is your ideal training base.

If you want to expand your design options (or the varnish runs out), then if necessary, replace these tools with others. To keep the nails clear beautiful patterns, use thicker varnishes. Images will not bleed and thin lines will not break.

Tools can also be purchased separately. If you are tired of drawings on the plates - look for new ones in the store, experiment and create!

Manicure stamping: main advantages

Look for other originals in our next publication!

Stamping with regular varnish step by step

1. Prepare for the procedure: wash your hands with soap so that they do not have the slightest dirt and greasy spots. Dry your skin or pat dry with a towel. Remember that it is better to carry out useful procedures for strengthening nails using beneficial oils at least a day before decorating the plates. After this time, the nails will absorb all the beneficial natural oils and will not be greasy. Accordingly, the decorative base will hold better!
2. Degrease the surface of the nails, apply the base.
3. Paint your nails with the main background varnish, let it dry completely! This is important in stamping! Only work on dry surfaces beautiful drawings. Otherwise, the base will cling to the stamp, creating wrinkles and unnecessary clots.
4. If you have just bought discs with pictures, then remove a thin film from their surface.
5. Choose a varnish for painting, make sure it is thick enough. When using specialized varnishes from the set, this need is eliminated. When choosing a color, make sure that the drawings contrast with the base. All designs must match the style and color of the clothing. To make the manicure look modern and fashionable, use years.
6. We varnish the stencil selected on the disk.
   
7. Without slowing down, remove all excess with a scraper. The varnish remains only in the recesses. It is recommended to hold the scraper at an angle of 45 degrees. You can adjust the pressure force during training. Too much pressure can also remove the varnish from the recesses, as a result of which you will get a drawing with broken lines and shapes. But too soft pressure will not be able to remove all excess varnish from the surface, the images will turn out blurry. We do everything without delay so that the varnish does not have time to dry, otherwise all efforts will go in vain.
8. We make sure that the image is completely imprinted on the rubber surface. If you saw extra spots of varnish on it or the pattern turned out to be fuzzy, then it is better to wipe it off the surface of the stamp with a napkin moistened with acetone and repeat the previous three steps from the beginning. We will give more tips on the execution technique in the continuation of the article.
   
9. Determine the place on the nail where the drawing should be. We press the stamp with the printed pattern to the nail. We do this with rolling movements from one side roller to another.
10. There is nothing to worry about if the varnish is imprinted on the skin. If drawing large sizes, then such minor troubles can not be avoided. Just gently remove it with a cotton swab. There is also a more convenient innovative tool - liquid tape, which is also called "pink thing". This discovery of nail service specialists will greatly simplify the stamping design and save time. liquid agent applied to the skin around the nail and thickens in seconds, creating a soft film. When applying a large drawing with a stamp, some lines go beyond the boundaries of the nail plate, remaining on a soft tape. After the varnish has dried, the film is easily pryed off with tweezers and removed from the skin along with particles of the pattern. Extraordinarily convenient!
11. Thoroughly clean the disc and stamp from the remnants of varnish with acetone.
12. In just a few moments, the drawing will dry, and it will be possible to cover it with a fixative. Don't make unnecessary moves. Apply the top coat in one or two strokes so as not to spoil the pattern. Spread a drop of finish on the surface without pressing the brush to the nail. It is necessary to make stamping patterns on each finger separately. To decorate other nails, follow steps 6-12 of the instructions.

If you have any questions about the stamping technique, watch the video tutorial.

Don't be discouraged if stamping doesn't work the first time. A few workouts - and the patterns will clearly and evenly cover the legs. In order to shorten the process of trial and error, we offer you top 14 tips from manicure masters.

1. If you find notches on the scraper or the tool is bent, then it is unlikely that you will be able to recreate the exact drawing on the basis. Some masters practice replacing the scraper with an unnecessary plastic card, noting that it is much more convenient.
2. More recently, an invention appeared in the art of manicure that incredibly improved the process -! The stamp for imprinting has found a transparent silicone base, and the handle of the tool has been transformed into a tube. Now you can easily see how the pattern fits on the nail, adjust the direction of the image and accurately select the location of the pattern on the nail plate. There have been many problems with this in the past. Small drawings on a large stamp were difficult to place correctly on the nail, they shifted to the side, laid crookedly on the base. Technology of work with silicone stamp differs from the standard described in this article. But our authors have prepared for you how to work with transparent stamping.
   
3. It matters a lot what stamping polish you use. The varnish should be thick enough to make the drawings clear. To "improve" the usual varnish of the selected color, you can leave it open for 20-30 minutes. The dried product will leave clear prints on the nails.
4. If the drawings cannot be transferred to the stamp without tearing in any way, this means that the varnish dries in the recesses faster than you have time to do all the procedures. First wipe the metal plate with liquid. Tiny droplets of acetone will remain in the depressions, preventing the polish from drying too quickly. Learn how to quickly apply colored varnish to the stencil, immediately pass over it with a scraper and immediately press the stamp.
5. Practice painting on the floor you are about to remove. Then it will not be a pity to remove the first unsuccessful prints along with the base. Only when you have learned all the secrets of technology, proceed to complete all the steps from start to finish.
6. Do not use liquid containing oil to clean discs and die. It has been proven by experts that in this case there is no need to wait for clear drawings. Clean the scraper just as thoroughly. Do it with the usual paper napkin while the varnish is still wet.
7. One of the most common reasons why stamping fails is that the nail polish on the stencils dries quickly. Therefore, all movements must be confident and fast. If there's enough in the room heat, low humidity, the air conditioner is on, the windows are open, the varnish on the metal disc will dry twice as fast. We recommend that you carry out the procedure in a cool room, with the windows closed.
   
8. Consider in advance the location of the composition on the nail, at what angle it needs to be applied. If you turn the stamp in your hands, choosing the right place for a long time, then the varnish on the stamp may dry out, and the drawing will no longer be printed.
9. Apply varnish to the stencil in an even layer, capturing the entire area of ​​\u200b\u200bthe pattern. Some lovers of home manicure try to paint only part of the composition, and then distribute the product over the entire required area with a scraper. But in this way it is rarely possible to evenly fill all the existing recesses. The printouts become intermittent.
   
10. After prolonged use, varnish particles may remain in the recesses of the stencil, which are already difficult to remove. No need to try to gouge them with sharp needles or other hard objects. As a result of such cleaning, the disc may become unusable, because the thin tracks will lose their original shape. Simply soak the entire record in acetone for a few minutes and immediately wipe with a cotton pad. This will help to remove all small contaminants from the recesses without much effort.
11. In order for the pattern to capture the entire surface of the nail plate, gently move the skin of the side roller with your finger. On the opposite side, the skin will move away under the action of the stamp.
12. Do not lubricate nails (or hands) with cream or other oil-containing products before stamping, because drawings simply will not be imprinted on a greasy plate.
13. Some masters prefer to apply the stamping design on top of the fixative layer. This way you can achieve greater clarity and contrast of images. But the drawing can quickly peel off the tip of the nail. Therefore, choose what is more important to you: expressiveness or integrity of the picture.
14. You can remove excess varnish from the skin not only with cotton swabs with acetone, scotch tape is perfect for this. Simply apply the sticky strip to your skin and the nail polish particles will stick to it.

As a result, you will get an exquisite, polished composition! Believe me, your efforts are worth it!

If you are tired of plain nails, then make some bright and unusual manicure. For example, you can apply drawings or patterns. Do you think that this is possible only in salon conditions? In vain! You can easily create real masterpieces at home if you use the stamping technique.

What's this?

What is stamping? This is a special technique for decorating nails. Drawings in this case applied using special tools. If the name is translated literally, it will mean "stamping" or "stamping". This is the essence of such an interesting and for many unusual way.

Stamping allows, firstly, to create interesting drawings and patterns. The choice is great, so everyone will find something to their liking. Secondly, this technique is quite simple and can be mastered by a beginner. Thirdly, the process is short, which is especially important for those who do not have enough time for trips to beauty salons and for long manipulations with nails.

Stamping kit

You can buy a stamping kit in a specialized store or in an online store (trust only trusted ones!). Here's what it will include:

• Drawing disk. Usually, one such disc can fit from 4 to 8 (sometimes 10) different patterns. He plays the role of a stencil. Such a detail is made of metal, patterns are engraved on it (they will be filled with varnish in the process of creating a manicure). Discs are different, choose the one you like.
• The scraper is intended for removal of surpluses of a varnish from a disk.
• The stamp is designed to transfer the pattern to the surface of the nail.
• Several varnishes for stamping.

The choice of such a set should be given special attention, because if it is of poor quality, then you simply will not succeed. Here's what to look out for:

• To date, only one Korean company, Konad, produces high-quality kits. But in stores you can find numerous Chinese fakes, the purchase of which is better to refuse.
• The cost of this set varies from 350 to 800 rubles (it all depends on what exactly is included in the set). A fake can cost 100-200 rubles.
• Pay attention to every detail. The engraving on the disc must be clear and even. The stamp should have an ideal semicircular shape, it is made of elastic silicone (fakes are made from simple rubber). The scraper is made of metal.

What will be required?

So, before the procedure, prepare everything that you will need:

• Stamping kit. There is a protective film on the disc, it will need to be removed before the procedure, otherwise nothing will come of it.
• Lucky. First, you need the most common one, which will be used as a background for drawings. Choose what you like. Secondly, you need a varnish for drawing a picture. We will talk about his choice in a separate paragraph, since this is important.
• . It is needed to remove varnish from the disk and from the stamp, as well as from the finger (be prepared for the fact that the drawings may go beyond the nail).
• Cotton pads for cleaning the stamp and disc.
• Fixer.
• Cotton swabs. With them you will remove varnish from the skin of the finger adjacent to the nail.
• A little patience and free time. You can't do without it.

The choice of varnish for stamping

Varnish for stamping requires a special one. Here are the requirements it must meet:

• Thick and sticky texture. If the varnish is too liquid, then it will not be possible to make a clear and bright drawing, because it will not be possible to transfer it completely.
• Color saturation. The varnish should be bright, saturated and have a sufficient amount of pigment. If the color is not saturated, then the pattern will be uneven, gaps will be observed in some places.
• The color itself is also important. It should be bright and dark enough to stand out from the main background.
• It is advisable to choose matte tones, they will be bright and noticeable. Gloss can shimmer and make the picture fuzzy.

It is best to purchase special varnishes for stamping, they fully comply with all the above requirements. Yes, the price of such funds is higher than usual, but remember that the miser pays twice.

Ordinary varnishes may work, but not all. The product should be thick and have a rich color. There is one trick: leave the bottle of varnish open for 10-20 minutes so that the composition thickens a little. But here you can overdo it, and as a result, nothing will work anyway.

May fit acrylic paints Because they are thick and rich. But there is one big drawback: they dry very quickly, so you may not have time to apply the pattern to the nail. Everything should be done very quickly.

How to do?

How to do stamping manicure? So, you have already completely prepared nail polishes and other necessary tools and devices, as well as a workplace. The application technology consists of several stages:

1. The first step is nail treatment. Remove burrs, push back cuticles. Create the desired shape of the nails, file the nails where necessary.
2. Apply background polish. If necessary, make two layers, applying the next only after the previous one has completely dried.
3. Start creating a picture only when the main nail polish is completely dry.
4. How to use the kit? First, take a disc and apply varnish to the selected pattern. He must penetrate into all the details of the drawings, even the smallest ones. Try to apply the varnish in a uniform and fairly thick layer so that the pattern is clear.
5. Now take a scraper, lean it against the drawing, pressing slightly, and with a confident movement remove the remnants of the varnish so that it remains only in the recesses. If necessary, this movement should be repeated.
6. Now take the stamp, lean it against the disk, press and hold for a few seconds so that the pattern is fixed on the surface.
7. The next step is to transfer the pattern to the nail. Place the stamp against your nail and apply the pattern to the surface with a rolling motion. You do not need to repeat the movements, otherwise the drawing will be blurry and fuzzy.
8. Now, using a Q-tip and nail polish remover, clean the contaminated skin around the nail.
9. After the patterns have completely dried, apply a fixer so that the pattern does not smear.
10. With a cotton pad soaked in nail polish remover, remove all polish from the disc and stamp.
11. Ready!

To make the perfect stamping with your own hands, follow these helpful tips:

• Choose contrasting combinations of tones so that the drawing is beautiful and clear.
• Don't worry if you don't succeed the first time, everything comes with experience. You can practice on paper or another surface.
• Do everything quickly so that the varnish does not dry out prematurely, otherwise you will not succeed.
• All movements must be confident and clear.

Create real masterpieces on your nails, surprise others!

Every girl dreams of attractive nails, modern technologies allow you to create original and unique drawings. Manicure with a stamp is a great opportunity to give your nails an individuality. The patterns are exquisite, suitable for any outfit.

Recently, stamping has been very popular, it is a novelty in the field of creating a manicure. With simple tools, you can quickly create amazing designs, you don’t even need to have drawing skills for this. The technology of drawing drawings is so simple that you can do an unusual manicure with a stamp at home, the video will help you understand this process. The most important thing is to show imagination, even the smallest details can decorate the nails.

Stamping kit

In order to make a manicure with stamping, you need to purchase a special set. It is represented by the following tools:

1. Stamp. May be rubber or silicone. With its help, the pattern is transferred to the nail surface.

The rubber stamp has been known for a long time, and many girls were able to work with it. The most important thing is the speed of movement. Over time, you can learn to create real compositions.

The silicone stamp is new. It is so easy to use that even beginners can easily master this tool.

1. Scraper - allows you to remove excess varnish.
2. Disc with various prints.
3. Nail polish.

Manicure with a stamp: photo

In order for the work to turn out to be of high quality, you must follow the instructions. This will create a beautiful manicure.

1. Prepare nails, degrease them, apply a base coat.
2. Treat all tools with nail polish remover.
3. Remove the protective film from the disc with prints, select the pattern you like, apply varnish on it.
4. Remove excess varnish with a scraper.
5. Take a stamp, perform rolling movements to the drawing.
6. In the same movement, transfer the pattern to the nail surface, this will allow the picture to be printed.
7. After the drawing dries, you can proceed to further work. Using a cotton swab from the skin, you need to remove the printed patterns. Some girls think in advance about the cleanliness of the skin and apply PVA glue to it. After the varnish has dried, the glue can be easily removed from the skin.
8. Apply a top coat on top.

It is important to know that all actions should be carried out quickly. After each nail, all tools should be wiped, this will allow you to get clear drawings.

Stamping manicure with gel polish

It is very easy to make a manicure using gel polish, there are several ways. Everyone chooses the most suitable for himself, all options are similar, and allow you to get an amazing result.

1. One of the most simple options, is used quite often.

• treat nails, file them into shape, degrease;
• apply basic framework, dry in an ultraviolet lamp;
• apply color gel, dry for a few minutes;
• apply top varnish, dry, remove stickiness with alcohol;
• it is possible to start stamping;
• apply the base base on the iron disk, remove the excess with a scraper;
• using a stamp, transfer the pattern to the nail surface;
• wait for drying, apply a transparent varnish.

1. This method is also common. The process of performing a manicure with a stamp can be seen in the video.

• prepare the nails, give them the desired shape, remove the cuticle;
• apply a base base, dry the nails in an ultraviolet lamp;
• apply colored gel polish in 2 layers, each of them should be dried;
• remove with degreaser sticky layer, transfer the drawing from the stamp to the nail surface, let the varnish dry;
• Apply top coat, dry nails, remove sticky layer.

Benefits of stamping gel polish

Many girls are faced with the question of which varnish to choose for the base. Experts advise when performing a manicure with stamping to pay attention to gel polish. This coating is ideal, allows you to create real masterpieces. If the master is a beginner, then you will have to work hard to achieve a good result. This foundation allows you to make mistakes, and easily correct them.

The main advantages of gel polish are the following:

1. In case something did not work out, the drawing is blurry, the mistake is easy to fix. The pattern can be removed with nail polish remover.
2. With the help of gel polish, you can choose different designs every day, without damaging the permanent layer. The same patterns will look different, it all depends on the imagination and mood.

In order for a gel stamping manicure to turn out flawless, and your nails to please, you need to heed the following tips:

1. Stamping can only be done on dry nails. A degreaser is an important tool, nails must be treated with a tool. This also applies to all instruments. Everything must be well prepared.
2. It is necessary to use lint-free napkins for removing varnish for work. This will give you the perfect drawing. Ordinary cotton wool can leave villi, after which the pattern turns out to be fuzzy, the manicure can be completely ruined.
3. The work needs to be done quickly. Beginners often face such a problem when the pattern does not print, or falls in pieces. This is due to the fact that the varnish dries quickly. Therefore, you should work quickly so that the varnish does not dry out.
4. A stencil for stamping manicure contains a large number of patterns. There are cases when the drawing is not clearly transferred to nail plate several patterns are printed. To prevent this from happening, a cotton swab should be at hand, and if necessary, she needs to remove unnecessary drawings. This will print only the selected pattern.

Nail art with stamping: ideas

With the help of stamping kits, you can create a delightful manicure, examples are visible in the photo. The nails will be decorated with unusual patterns. Can create various options, combinations different shades. There are a lot of options, it all depends on inspiration.

The most common patterns that are found on the nails of beauties are as follows: geometric figures, flowers, animals, plants, cartoon characters, sweets, abstraction, alphabet, waves, hearts.

In addition, French manicure is popular. This option is always in fashion, suitable for any outfit. To make a manicure with stamping, you need to choose a pattern with an arc, you can familiarize yourself with the execution technology from the video. The drawing must be transferred to the edge of the nail, resulting in a neat French manicure.

In order for the nails to be decorated with a variety of patterns, it is recommended to purchase several plates with templates. This will allow you to create amazing patterns and pick them up depending on your mood.

The result is simply amazing, with the stamping kit you can create amazing patterns. The most important thing is that the work can be done at home, without special skills and abilities. Experiments are welcome, you can make different patterns every day and delight yourself with an amazing manicure. These nails will not go unnoticed, they will help create a stunning image.