I post for you the story of a striped backpack and tell how to sew a backpack with my own hands from contrasting flowers of artificial leather. In my opinion, its effectiveness is precisely in contrast, latitude of strips and, accordingly, the final height of the backpack.
The prototype of this backpack client offered a photo of a backpack made of genuine leather. I often ask the photo to roughly understand that the client wants to get as a result. It helps to avoid mutual disappointment and makes it possible, in the discussion process, adjust the image of the future backpack or bag.

How to sew a backpack with your own hands, pattern and cut

The height of the backpack is 35 cm, and since 5 strips were planned, each was height 8 cm (7 + 1 per battery).

In my video, there are more detailed instructions In size and in the same place, below, in the article, you can get the pattern of the valve and the curly bottom of the backpack.
The perimeter of my figured bottom (on one of the photo below its form is visible) is 82 cm + 1 cm per battery and in the end we obtain the width of each band 83 cm.
The pattern of the valve and the bottom I have a ready-made template (you can take). Looks and handles backpack I do at least 70 cm long and 12-20 cm short. The width is at your discretion depends on what way you will sew them, the edge's jack or with a bend inside the allowance. I have 8 cm, I fed up.
Inside: Lining a 32 cm high and a strip of leatherette with a height of 4 cm. I always try up the lining to arrange the same material as the outer part of the bag or backpack. First, beautifully, secondly is not visible lining and thirdly, practical in the plan for installing chalks.
As can be seen in the photo below, the applique of the Paris Tower was conceived on the valve, simply and simple, but nevertheless the client liked the idea.
The size and number of pockets can also be the most different, based on your wishes, and most importantly, needs!
In my version, you needed a pocket with a zipper from an external outside, under the valve and a couple inside open.
Also, for volume and additional form, the isolene was added (substrate under the laminate). I like this seal due to ease and not difficulty in sewing. Skilled, from it, parts of the valve and bottom.
Still, I needed a small handle, for carrying a backpack in my hands. There I planned to insert cord for rounded form. The length of the part is about 20 cm, but it can be shorter, and longer. I saw such a looping and very long (I don't really like this option, all the time I remember as for them, there were enough boys in the school). And instead of the cord made a strip of 4-5 mm wide from the dark leaving in the finished form.
Well, finally, metal fittings have been added. 2 pieces of half rings, 2 pieces of length controller and the button for the valve.

You ask how to sew a backpack with your own hands? Yes, just!

First I make billets from individual details. Stitching the bumps, the handles and immediately do the accessories (so that you are not lost in the process of shifting parts, and then I can safely wash the detail for the typewriter)

Seving cute to the bottom in accordance with the markups. And also attach the seal around the perimeter, along the edge of a large line.

On the bottom item of the valve, put the top of the button. Send the applique to the upper part and collect the sandwich from the valves and the seal. Turning and laying the finishing line at the top.

In the middle of the second strip, noted the size of the entrance to his pocket, and made a frame under zipper. I decided to do this on a separate, not yet sewn strip, it seemed more convenient.

The next step sewed together all stripes alternately changing the color

And made a stop at the top of each edge, wide, decorative seam.

I love this stage. It is not really difficult to sew a backpack with your own hands, but the most interesting starts when you collect all the details into something big and already substantial. When there is something concrete and beautiful on your eyes and with your own hands. Singing cause me a feeling of completion and quality.

Made a blank of a small handle - loop and cord from leatherette to a backpack tone. But in the process, I still changed my mind and sewed the usual loop. But I managed to take a picture, so I show you.

We collect a lining. Send overhead pockets and upper stripes - border from leatherette. On top of the curb watched the pinch.

We collect the outer part of the backpack in the bag and sew all the details to it: the bumps, the knobs, on top of them - the valve.

Insert the bottom with cute, focusing on the markup.

We connect the backpack lining on the same principle. Insert the bag into the bag and sew on the upper edge.

Soak through the left hole in the podcast. Even, after I fill the lining inside, laying the finishing line along the top edge of the backpack.

I celebrate points for punching holes for lupherts. I make holes and put the accessories: the champs and the bottom of the valve button.

Sewing the hole in the lining. Insert our cord and ready!

It turns out that she is not quite difficult to sew a backpack. What do you think?

P.S. Did you like the backpack? Write your opinion at thenime, I will be glad very much!

Universal denim does not lose its relevance in the new summertime season. The jeans bag is a new current summer trend 2016. You can decorate the wardrobe with a fashionable detail without extra costs, if you sew a wardrobe element with your own hands. The benefit that the material is easy to find in any house: any old, worn canvas from Denim or who have lost the relevance of denim pants will come in handy.

Pattening backpack made of jeans

The pattern is not difficult to make it possible, without referring to professional cutters. To do this, on a dense cardboard or special paper, draw details of the future thing, according to the planned sizes. Mandatory parts: Front, rear, valve, straps, or cord or braid, tightening a denim backpack.

You can foresee and draw the front, side pockets, the height of the back and its width. Remember: the front part will be a mirror copy of the back.

Details in the form of wedges need if you plan to do the bottom, and the longest side should be equal to the width of the back and the front of the product.

Invented the pattern? Transfer it to the fabric, not forgetting to leave points on the seams (approximately 3 cm).

A good idea!

Beads, rhinestones, rivets, inserts from Atlas or Citz will turn your wardrobe subject to a real handmade masterpiece. It is easy to hide a thing even on the eye: a big plus tailoring of any kind of denim tissue is that they do not require an accurate fit and allow liberties.

How to sew a backpack with your own hands: Step-by-step instructions

We will need: Denim, a bit of synthetic trees, zipper, the patchwork of multi-colored fabric, velvet, lace, in your taste.

1. Cut the details whose size choose yourself, focusing on the size of the future product. Do not forget about straps, bottom of the product and its side parts. Cook lining.
2. Now you need to lay out each item, cut it and flash with Singry Training. So a denim backpack will be better to keep the form.
3. Sweep the items between themselves and set straps. Now you need to sew two stripes to the lock, making a bend inside for wrap and sew the sidewalls.
4. Succession of zipper, straps and handle to wear a product, holding from above.
5. Such a scheme can be used for a polklad, connecting it with the main part.
6. Decorate the finished product with your own hands at your discretion of an arbitrary pattern in the patchwork style, or come up with an interesting plot.

Fashion Council!When working S. denim There is a nice nuance: any deformation of the fabric, be it rubbed or hole, can be originated and hidden behind accessories. Jeans is very fertile material that looks great with many tissues: velveteen, slices of leather or velvet are always relevant and stylish in combination with jeans.

DIY storms

Bag in the form of a bag is a very pleasant element of the wardrobe. A universal bag-bag without a certain form is very easy to sew from pants, old rubbed shorts, or a boring skirt. In this case, even a teenager can cope with work: the pattern is not required at all, and the fantasy can be raised.

For a small handbag, only one pant will be needed, and for a large one - comprehend in any order two and get the cloth to the sewn. It will remain just flashing up the hole for gum or lace and pull the finished product. After that, decorate the storm in your taste.

Play with styles!Item bag can completely replace even fashionable evening clutch. Discuss it with multi-colored sequins, decorate with multi-colored beads, a lace or leather inserts. You can put a few bags of different sizes to beat the outfit with a fresh accessory every day.

Pattern of the children's backpack

Many craftswomen make a children's storm or a dance of Denim using different Denim flap. In this case, it will be better for examples of stapled loskuts combined from different fabrics. Pattern B. this case There may be conditional: you only need to provide the details of the front, rear wall, straps and valve. Decoration, think about your own tastes and preferences.

According to the reviews of all those who sewed things from Denim, this material is dense, so you will need sharp scissors and thicker thicker (number 100 and 120). As a fitness, you can use the used carbines, leather straps, buttons and rivets.

When planning a children's backpack, do not forget that for the boy they should be strict. Thermal appliqués will help to dilute the "harsh cut". However, it all depends exclusively from the wishes of the child and the skillful hands of master's hands.

In Soviet times, almost every tourist sewed a hiking backpack, because the stores were littered with soft abalaki or machinery "Ermacs", we saw new models only in photos in the journal "Tourist". Although, of course, the tailoring of tourist backpacks was not an easy business, because everything was in short supply: from fabric to fittings.

But if you have a desire and free leisure, and a suitable fabric and fittings are planted in the covers, then my step-by-step instruction On how to sew a marching backpack for 90 liters (frame) will help you make a really useful product.

Useful articles:

Matching backpack with your own hands: Materials and fittings

In order to sew a tourist backpack with their own hands you will need:

Dense Capron type Avizent or Cordore - 3 square meters. m or cut 1.5 * 2 m
Thin cape type of parachute silk or Bologna - 1 square. m or cut 1.5 * 0.70 m
Isolon (tourist mat-foam) - 1 square. m, thick 1 cm
Sport narrow, 25 mm - 7 m
Strip wide 45 mm - 2 m
Buckle tightening - 14 pcs.
Buckle snaps - 2 pcs.
Buckle snaps, wide on the belt - 1 pc.
Lightning - 20 cm, 1-3 pcs. Depending on the number of pockets
Lightning - 30 cm, 1 pc.
Braid to strengthen the seams - 2 m, 1-1.5 cm wide
Rope for the tube - 1.30 m, with a diameter of 3 mm
Aluminum tube - 2 pcs., Length 70 cm, diameter 4 mm
or plate - 2 pcs., Length 70 cm, width 2 cm

Dimensions on the pattern hiking backpack Sitted in centimeters, without taking into account the stacks on the seams. If you want to sew a not 90 liter, but 75 liter backpack, then reduce all the sizes of the "body" of the backpack by 10 cm, the backpack backpack height is 10 cm, the corticle of the tube is 20 cm.

How to sew a backpack: cutting the main elements

Tailoring of the tourist backpack begins with the cutting of its main elements. Do not forget to bounce the edges of the cloth with a lighter to bind the edges of the fabric to do not succeed. The seams are better to shoot by kapron or lavasan threads, zigzag. If the machine does not sew a zigzag, make two parallel lines.

Fig. one. "Body" backpack 75 * 80-85 with marked pockets, if you need them (I recommend only one - central). At the bottom of the corners you can immediately sew rafrops, a length of 40 cm and a 25 mm wide, amplifying them with tissue brazers.

Fig. a, b. Picture of pockets, they need to be inserted in them (place its sewing place at your discretion, we advise you to decide on it in advance before starting to sew tourist backpack with your own hands).

Fig. 2. Backpack spin - 75 * 30 with a bottom of 26 * 33 of dense capron. The bottom can be seized separately, but it is better to cut them with one panel, which reduces the number of seams.

Fig. 3. Shoulder straps: two of the dense capron, two from thin. The same form you need to cut two blanks from isolon (foam). The second strap must be carved in the mirror image.

Sust together a dense and thin detail, taking them to each other along the contour. Remove and paste into the inside the band from the isolon. From above the dense side of the straps of the trigger with a sling with a width of 25 mm, setting it in 3-4 places across. The strip must be ended there, where it is also a strap and end the tightening buckle.

Fig. four. Valve 32 * 26. Cut and sew, sewing a thin fabric (Fig. B), as if making a box. Sew 30 cm lightning, or by seam, or in the center of a wide wall, making a slot. At the corners of the sew 4 tightening buckles.

We sew marching backpack: manufacturer

Now proceed to the most difficult in such a matter how to sew a march backpack - the manufacture of the back.

Fig. five. Take the backpack coated earlier (Fig. 2). Sew 2 strips with a width of 2.5-4 cm (tunnels for future frame tubes or plates).

Under the tubes fit a 25 mm wide, under the plate - a strip of dense capron. Sew 6 tightening buckles as indicated on Fig. five, 4 slings 25 mm - 2 at the top and bottom. In the center of the back, insert a 25-mm loop with a 25 mm sling at a distance of 25 cm from the top edge.

Fig. 6. Ready shoulder straps to sew on top of the loop handle. If your height is 170-180 cm - at a distance of 50 cm from the bottom edge. If above - 55 cm. If below - 45 cm. If you are trying not for yourself, before you sew a backpack specify this parameter.

Fig. eight. Put the item from Isolon and Soft Capron. Make them together.

Fig. 7. Our detail with rice. 8 on the back of the backpack on top of the straps. The bottom part of the part (trapezium) will be detail two lines across the back, so that between them you can insert the belt.

Fig. nine. The belt is also made as shoulder straps (Fig. 3): Stick together dense fabric, Isolon, fine fabric. On top, you will set a wide range (you can automotive safety belt), which are a snap-down buckle on one side. To the edges of the belt, will take 2 additional slings with a width of 25 mm, a length of 40 cm (they will attach the belt to the "body" of the backpack), at the place of their "docking" with a backpack, a tightening buckle.

Fig. 10. Take the "body" backpack (Fig.1) And our slings are 25 mm wide on it as shown in the figure.

Details Fig. 10 and Fig. 7. Sewing among themselves in a twisted form - pockets and straps inside, and the seams outside.

Strengthen the main seams, taking a braid to them.

Fig. eleven. Pour a pipe in the form of a pipe from soft fabric 30 * 110. Generate the fabric from its every way to get a row and set. The width of the Kuliska is 1-2 cm, depending on the thickness of the rope for tuging, which you are going to do it.

Sew Tubes to the top backpack. Remove the backpack. Insert the sewn strips in advance (Fig. 5) Aluminum plates or tubes sliced \u200b\u200bin size before sewing a backpack. Fasten the valve, insert the belt and fill in one of its sling the second part of the fastened buckle. Fasten the belt with thin pins to the backpack.

Inspect the backpack if something you think is not enough - add. Ready! You managed to successfully sew a hiking backpack with your own hands!

You may have improved our patterns, safer a more perfect hiking backpack with your own hands.

Dmitry Ryumkin specifically for

This master class backpack is your own hands + pattern will be useful not only to needlewomen, but also those who do not like to wait a long time from the Aliexpress site. The fact is that I am also a permanent buyer of goods from Ali, and from time to time I use the opportunity for a low price to purchase a lovely soul of things, one of which was two years ago my backpack became.

• Pattern Backpack with Aliexpress
• How to sew a backpack with your own hands step by step

Why did I decide to sew a backpack with your own hands, and not buy a ready thing

This canvas backpack with Aliexpress traveled with me and, as well as I constantly exploited at home in the campaigns for products. I am so accustomed to this comfortable thing, which was very upset when I saw how he had already started swaying. Repair this thing was no longer subject to, and appearance He was exhast. Therefore, I decided to find him a replacement.

Searching on the expanses of Aliexpress Similar Rukkaki, I read all the reviews on them. Unfortunately, most of them said that all these bags are not reliable: the handles are torn and often fail the locks. Weighing the pros and cons, I decided that I would try to sew a backpack with my own hands. So I will definitely be sure of the quality of the thing and I will make it like that I like and comfortable me. And since I have an old backpack - I used it as a pattern for the pattern.

Let's sew with me! For me, this is the first experience in the sewing such thing, so I was interested in working on it. I will say more - I spent behind the sewing machine far over midnight. The time that I went to sewing is about one day with intervals for personal and family matters.

I will say right away - to sew a backpack Aliexpress, it turned out to be a task not from the lungs. Therefore, I advise you to take on tailoring if you have a little experience in sewing. The beginners of this master class will master more difficult.

What I needed to sew a backpack with your own hands

Since in the process of sewing, I broke a lot of firewood in the form of a broken machine needle, then I advise you to purchase strong needles for sewing. I have a number 110 "for denim fabrics and tarpaulin."

Fabrics and accessories for sewing backpack:

• A dense casing with water-repellent impregnation - 50 cm. It will set the basic tone (color) backpack.
• A dense casing with water-repellent impregnation - 30 cm. This protective print is interesting to beat the backpack.
• Lining fabric - 50 cm. You can take a color on the contrast. For example, I always liked the bags with a bright and unusual lining.
• Spunbond or isolon - 50 cm. This fabric will give stiffness and form a backpack.
• Recovaya tape for 40 cm. And length regulators - 2 pcs. For handles
• Metal lock 75 cm.
• Metal lock 20 cm. For pocket
• Stripe
• Threads in color - 1 coil

Sewing tools for sewing backpack:

• machine needle number 100 - 110
• lightning Seam Foot - Single Road
• sewing Tools: Spindlers, Scissors, Portnor Pins

I spent 270 rubles for all fabrics and fittings. Castles, handles and energyflex I did not purchase, but took from the old backpack.

Energy flows, or isolon is a foam base on the back and bottom of the backpack, to give stiffness. It needs 40 cm. Sale in the construction department, maybe it remained after laying a laminate or

Pattern Backpack with Aliexpress

1. Swing the old backpack to take advantage of Chinese patterns. Well, the castles too. By the way, I still left the handles if you have an old backpack you can take from it.

Picture backpack Aliexpress with parameters: height 37, depth 15, width 28 cm.

1 - before 27.5 x 30

2 - lower part of the transfer 12 x 60

3 - back 30 x 39.5

4 - sidewall 15 x 81

5 - bottom (bottom) 17 x 30

6 - Pocket Lower 16 x 27

7 - Pocket Top 8 x 27

8 - Pocket Top 5.5 x 20

9 - Castle Cover

10 - handles on the back

11 - Handle

Master Class Backpack DIY Pattern with Aliexpress

2. Each part of the pattern cut out in three copies.

3. Three layers of tissue stitching together along the edge, process open sections on overlock or zigzag line. I do it paragraph 2 and p.3 with each detail of the backpack (the back and bottom does not yet stitch).

4. Next to the back (part 3) and the bottom (part 5) backpack laying the energy flow layer. Which needs to be passed along with a cloak and spandbon, this I will fix it and give stiffness to the details. Then close on top of the lining cloth.

5. So the backpack backpack looks like the front side. Immediately fix the handle on top of the top (pattern with letters on the seams 3 x 19 cm.).

6. I make two pockets from the cloak fabric: I cut the segment of 17 x 36 cm. I make a fold in the middle of each pocket at the bottom and sew them on the lining. Inside the back sewing a lining by fixing it along the edges and in the middle through.

7. Fold from above and on the sides of the back two handles backpack.

8. Now I turn to the processing of the backpack. I take a shelf (detail number 1), unbuttoning the castle 75 cm, I apply it facial side To the front and fixing the pins around the perimeter as in the photo. Seving the castle on sewing machine Using a special single-faced foot for sewing lightning. Then you can fasten the lock.

9. I take the sideline (item 4). I cut out from the cloak tissue segment 5 x 74 cm. - It will close the lock from above. Duplicate this segment with spandbon, I add in half and feed on the machine to the sidewall.

10. I find the middle of the details 1 and 4 (shelves and sidewalls), I make the tagged with the Portnovo small, combining them in the center.

11. I impose details 1 and 4 on each other facelights Inside, aligning chalk tags. Fix around the perimeter by pins.

12. Now the lock needs to be unzipped.

13. In the sewing machine, sew the castle to the sidewall with the help of a special Single-faced foot for sewing lightning.

14. Buttage Castle. I take the bottom of the pass (item 2), I find the middle, put a chalk tag. Connect these details with each other.

Master class, how to sew a volumetric pocket on zipper.

15. I take a ready pocket. I look for chalk place for your pocket. I did it on the eye, attach it where it will be convenient for you. Attach your pocket to the edges, then on the sewing machine.

16. I take the bottom (Detail 5, it needs to be passed, as I showed in Article clause 4) and the front of the backpack. Combine these details in the middle.

17. I fasten the details of the pins, then on the sewing machine.

18. It turns out such a "basket".

19. Establish the castle. I cover this "basket" with a back cover (item 3). I fasten the pins and on the sewing machine.

20. That's all - my backpack, which I sewed with my own hands ready. I can safely use and not be afraid that the handles will tear off!

Why is it worth sewing a backpack on Aliexpress

Honestly, I really liked the result. Then my relatives, seeing this backpack, also asked to sew them the same. I had to sew my daughter exactly the same, the colors herself chose in the store. In the photo you can understand what your favorite color is. For winter, it turned out to be bright, and raises the mood in gray cloudy days.

If you have a desire and little experience in sewing - certainly a selection. Since in quality it will survive its original with Aliexpress. I have it compared to the old one, much better keeps the form. Castles can also be put much more reliable, and he will serve you much longer. So feel free to use this pattern backpack.

And one more weighty argument is something that - now I can wear my laptop in a backpack. The fact is that in the old backpack my laptop was not placed, and it was for me a real problem. Since my work is connected with the computer, I have to take it with him on the trip. And now I can quietly collect all things in one backpack, and go back your laptop. It's crazy convenient! You do not have to collect a bunch of Avosk, everything fits in one bag.

Perhaps you will be interested:

Friends, all the information presented on my blog is completely free - and I will be very pleased if you share a link to my article (the buttons shackle are below ↓).

The backpack is a comfortable and universal thing that is suitable for children and adults. Stores offer all sorts of models. But it happens so that no one does not like. In this case, the backpack can be sewn independently. The simplest pattern of the backpack of jeans is built from Croy pants. Suts on old jeans do not need to break off at the same time. It is enough to separate the lower part from the top.

We sew a simple children's backpack with their own hands on patterns

We offer a small master class for sewing a children's backpack.

The pattern is two equal rectangles. The upper part will be tightened with a lace. Such a backpack is suitable for a boy and a girl.

• 2 rectangles of fabric, measuring 28? 35 cm.
• 4 Fliselin 5? 5 cm.
• Lace - 2 m.
• Metal blocks or recordings, nippers, threads.

We glue phlizelin on the lower corners of the rectangles. We process cuts overlock or zigzag seam.

Details are folded by the front sides, we fasten with a needle and outlining the indent to the upper edge of 5 cm. We sew the details along the long sides and one short to the retirement line.

Throw iron side seams.

We make a scene by exposing the upper edge by 2.5 cm, and stroke.

We shoot it at a distance of two cm from the edge.

We celebrate places for chalks and make holes.

From the wrong side, we put the washer, with the facial - the lover of the convexity up, clamp.

Attay the cord into the hole and rude to it pin. The cord is ingestion in the scene from left to right.

Now we skip it through the second hole, and we will send it to the scene on the second side. Cord ends hide.

Ready backpack.

You can sew a backpack of this model from any tissue you like. Optionally, it can be complemented by pockets. If we sew a backpack for the girl, then it can be decorated with beads, appliqués, ribbons, etc.

We try to make a spacious skin backpack and denim

Denim and leather backpacks will always be in fashion. Therefore, we offer patterns of a female backpack from these materials.

The photo shows a leather model.

• Soft skin.
• Fabric for lining.
• Buckle, lightning, 10 metal festers.
• Belt tape.

I cut the leather parts presented in Fig. 2. From the fabric - the main part of the product and the bottom.

We glue and climb a zipper to two leather strips, as in Fig. 3. It is designed for pocket. One strip is addicted to it, and the second to the backpack, after inserting the buckle, as shown in Fig. 4. Connect the sides of the main part.

We shoot the lid by inserting the strap. Leave the hole to turn out. After that, on the front side, we make another line at a distance of 1 cm from the edge, and sew the cover to the rear of the main web (Fig. 5).

We glue the handles, and on top of the place of their mounting sew a rectangle from the skin 5? 10 cm. Then we sew the leather strip on the bottom of the backpack, as in Figure 6. It is sewn to it.

We sew lining details, leaving a small hole. We fold the detail of the backpack and lining with the front sides and sew on the upper edge. After turning out, the hole is sewn.

We rub the seam and spend, retreating from the edge by 1 cm. Insert the festo, we skip through them the cord, as in Fig. 7.

Leather backpack ready.

The most common way to sew a backpack from jeans is to take their upper part. In the clutups insert the belt, and sew the bottom. As a result, a bag-torch is obtained.

The second version of the wreck is made from the pantic glue. Insert one to another one and get a double bag. The bottom can be made both wide and narrow part, at your discretion. The top is processing to fasten the fasteners and straps. The latter in the upper part are sewn together, and in the bottom - we will be divorced in different directions, and sew the bottom.

Here are still patterns of a denim backpack.

Sew your own hands can be a backpack for fishing and hikes. For this you need:

• Waterproof fabric (nylon, polyester, cordura).
• Lining fabric.
• Accessories (carbines, velcro, lightning, buckle).
• Threads kapron.

First you need to make a pattern. For drawing patterns, it is better to take a traction or millimeter paper.

• Back.
• The front of.
• Sidewalls.
• Outdoor pockets.
• Straps.

When the pattern is ready, stitch according to it the details, while adding the necessary equipment.

• Fastening for the necessary things well placed on wide belts stitched vertically on the product.
• To make a backpack, it is convenient to wear on the back, the back of it is wearing a ventilated cloth and sew a dense foam.
• Fastening is better to choose from metal or plastic. Lightning - out of plastic, since they are smaller.
• You can enhance the straps using modular mounts.

Selection Video on the subject of the article