Not far away New Year, and if you like to constantly make something and you want to make your home more comfortable for the upcoming New Year holidays, and at the same time surprise your loved ones and friends with something special, then given master class is just what you need!

For work we need:
- green and corrugated paper brown;
- scissors;
- rigid wire;
- thin wire;
- glue stick.

We take a roll of green corrugated paper, measure a length of about 6-7 cm and, without unfolding the roll, cut it off.


Straighten the segment into a ribbon and cut it into 4 parts. We cut each part with noodles (width 1 cm), without cutting to the end about 1-2 centimeters.




We carefully twist the cut ends with our fingers and get thin pine needles.




At the exit we have 4 ribbons with needles. How many pine branches you plan to make, there should be as many ribbons.


We fold the stiff wire, which can be purchased at stores selling materials for decorating flower bouquets, in half.


We begin to gradually wind a tape with needles on it. Needles in the process of winding, we try to straighten and do not wind on a wire rod.






At the end, we wrap the tail of the paper tightly and glue it with glue - a pencil. Please note that when working with corrugated paper, it is best to use glue - a pencil, as it prevents the paper from getting wet.


The leg of the branch, on which there are no needles, is wrapped with corrugated paper of the same color as the needles. For our composition, we made 4 pine branches.

Now it's time for the cones. I will say right away that it was not so easy to make them, although in principle there is nothing complicated about it. Again, cut off a piece of about 5 cm from an unrolled roll of already brown corrugated paper.

We evenly bend one of its edges.


Next - bend the upper right corner with a triangle 2 times.




We bend the right side of the folded corner halfway, holding the left side. On the left side, we again make a bend twice and a lapel.




Just be careful not to tear the paper. We make such bends along the entire length of the segment.


Now we will twist the segments into cones. We take the first finished piece of paper and begin to twist it in a circle, overlaying the pattern one under one.




We fix the bottom of the cone with a thin wire.




Next, we attach the finished cone to a rigid wire, which we wrap with green corrugated paper.

You can immediately wind the segment onto a double-bent wire, just as we did the twigs. This option is more convenient.

And finally, we collect ready-made twigs and cones into one whole, and carefully wrap the composition so that it does not fall apart with corrugated paper.

Pine branch with cones is ready! We put our coniferous bouquet in a pretty vase and admire the results of our work! If desired, it can be decorated with small Christmas decorations, serpentine, rain, etc.

The indisputable advantage of this pine branch is that, unlike the real one, it will not crumble and will be able to please the eye right up to the next New Year! Happy holidays to all! Good luck and implement new ideas in the New Year!

Irina Demchenko
Сhudesenka.ru

Paper cone - simple voluminous craft, and in combination with a branch - an interesting composition that will decorate the exhibition, the interior, will be an excellent gift for loved ones, which the child will make with his own hands. Despite the ease, in some cases, adult assistance may be needed.

Pine cone materials:

• Paper Brown color;
• PVA glue, scissors, a simple pencil.

How to make a bump out of paper?

Have you noticed that the cone looks like a flower from above and in the cut? So our cone will consist of many flowers of different sizes. Use a template or draw 4 flowers, from large to small. For crafts we need:

• 8 large flowers - A size (see photo);
• 6 colors - size B;
• 4 flowers - size C;
• 5 flowers - size D.

Preparation of components

Redraw according to the template and cut out all these flowers. One sheet of paper may be enough for a bump, but this is the case if you carefully save space, draw each flower and cut each one out. But you can significantly reduce the whole process - fold the paper several times and cut out several flowers at once. But in this case, the paper will go more.

Cut a rectangle out of paper, slightly smaller than the narrow side of the paper, then it is better to cut off the excess than the length is not enough.

Fold the segment into a very thin tube. Here the work is quite thin, since the tube must be dense, it will hold the layers of the cone. If there are problems with this, then it is better to use a barbecue stick for this purpose.

Now you need to make a small hole in the center of each flower (children will need the help of adults) and fold the petals of all the flowers in half to give the flowers volume.

Cone assembly

All the components of the paper cones are ready, it's time to put them together. To do this, cut the tip of the tube, bend it to the sides, apply PVA glue at the very bottom and thread the tube into the hole of the flower. Lower it down and press down so that the area with the glue grabs well. If instead paper tube use a kebab stick, you can stick paper on the tip, or tie a wire there, or apply good glue, for example, with a glue gun. This is all done so that the flowers do not slip off the tube or skewer.

Glue everything big flowers size A. First apply glue to the tube, and then stretch the flower towards it. Try to make small distances between flowers, no more than 3-4 mm. Thanks to the glue, the flowers will be held in a certain place without moving into one pile.

Similarly, glue all the flowers of size B and C. And leave the last small ones, size D, a couple.

Cut off the excess tube, and glue on top small flower. Then squeeze the last flower in the center so that it puffs up well, and complete the paper cone with it.

This is such a beauty, almost like a real one.

For her, you can make a branch.

Corrugated paper pine or spruce branch

Branch materials:

• Green corrugated paper;
• Shashlik stick;
• Glue stick, scissors.

How to make a pine or spruce branch out of paper?

Cut off a long strip of crepe paper. I made a very small branch, but if you need more or two, the strip should be the entire length of the paper.

Fold it several times and on one side cut into thin strips, somewhere up to the middle or a little more.

You will get such a fringe.

Now all these stripes need to be twisted into thin needles. Just twist in one direction with two fingers and the paper will curl.

Apply glue to the tip of the corrugated paper and secure it to the top of the skewers.

Then wind this shaggy ribbon on a stick, dropping a little lower with each turn.

Secure at the very end with glue. I had to shorten the stick a little, but if you need a long branch, continue to work until the end of the stick. Everything, pine either spruce branch corrugated paper is ready.

Hello!

Today, on the eve of the New Year, I would like to offer you another wonderful craft that we will make out of paper. This is a voluminous Christmas tree that you can easily make with your own hands right now. Because you will have everything you need, these are diagrams and the necessary templates. The forest beauty will turn out lush and fluffy.

Well, if you want to do the work more complicated, you can look in, there we created products from various improvised means, and even made a stomp.

Do not forget to decorate your apartment with others.

Well, let's start looking at and choosing the works you like and roll up your sleeves to create and surprise everyone. I wish you all good luck and patience.

You always want to make such an ornament yourself, because it will look original and at the same time beautiful. All you need is a sheet of paper from which you can easily fold an amazing craft in the form of a Christmas tree.

In addition, such work can captivate your child and he will be happy to sit and bother. Well, take a white sheet or possibly colored green, but then double-sided. Bend it in half with its short side. And draw a Christmas tree symbol. Here are examples of templates that can be used.

Then start cutting along the lines, and then make cuts and fold them in the way shown in these pictures. You need to make a blank in triplicate, and then glue them together. It will come out stylishly and very openwork, but also of course voluminous, which will undoubtedly please everyone.

The next option is no less interesting and charming in its simplicity. Take these stencils and print on the printer, and then you will get a work in the form of ZD.

Where you see the main contour, take it and cut it out with scissors, but in the recesses, make only notches so that you can turn it out afterwards, as shown in the photo. Two blanks of the same shape are further glued together.

And if you really want to surprise or slay everyone, then make a whole composition, that is, a forest beauty, and not just one, but with a deer.

And another version of 3D crafts, which I propose to cut out on a simple landscape or office sheet, and then paint it with gouache paints to make a real masterpiece.

You can use a can of glow-in-the-dark spray paint to create a shimmery effect.

Look at the zeal and desire with which a child does such work.

And here is what we end up with. The beauty is indescribable.

The next option, also quite interesting, is a Christmas tree made of green paper in the form of eyelets, read this instruction and create with me. This year we made such a charm with my son. It came out great.

Well, if you still have some questions, then I will be happy to share with you this video, which shows this master class.

Christmas tree in origami technique (a simple diagram for children with a description)

I think that in childhood everyone was fond of such an activity as origami. All because, it would seem from an ordinary sheet, once an amazing result comes out. Preparing for this article, I did not even suspect that such an ornament as a Christmas tree can also be made using this technique. Imagine, and that's what I was lucky to find.

Any old book without a thick cover or a notebook will do. And the sequence of actions for folding will be as follows. Fold all the pages of the book from the left corner to the middle.

And then complete the bag, that is, one more fold.

Cut off all excess, do it carefully and efficiently, take your time.

After unfold the product on the table, and sprinkle with tinsel or sparkles.

If you decide to make the work a little more difficult, for example, if your children are already going to school, then you can offer them to create such a forest beauty.

The next work that is done in labor lessons in primary school or classes in kindergarten. The description and all folding steps are shown in this illustration. Get on with the job.

If you love modular origami, and own this technique, then make such a souvenir.

How to make a voluminous Christmas tree from corrugated paper for the New Year 2020

We will need:

• cardboard or thick paper
• green crepe paper
• any glue
• scissors;
• bows, red paper, beads
  

Stages:

1. Make a cone out of ordinary cardboard, then glue it with corrugated paper.

2. Now it remains to build branches, like needles for a future product. To do this, cut the corrugated paper into strips, cut the edges to make a fringe and twist each into wooden stick into a bobbin. You get something that looks like a flower.

3. And glue the workpieces to the cone using the trimming method. For spruce with a height of 15 cm, you will need 120 small blanks in the form of lush flowers. You can take a ready-made bow for decoration, or make it yourself from the same corrugated paper. Use also cotton wool with sparkles, this will give the tree a chic and elegant look.

The next option is no less intriguing, as if the Christmas tree is made in a spiral, an ordinary paper cone is also taken as a basis.

Make a base for the tree to make the following. Use glue, scissors, and thick paper or cardboard.

2. Take corrugated paper 18 cm wide, but the length should be about 2 m. Fold the strip in half with the long side. Apply glue from the edge, leaving a gap of 1 cm.

3. And start to tighten a little to get a skirt.

4. Wrap the product with such a prepared strip, drip glue in some places so that everything sticks tightly.

Wind it only in a spiral to make the work voluminous.

Here's another amazing option.

Forest beauty from colored paper and cardboard

The next beauty will be made of colored cardboard, but make decorations from colored paper. The Christmas tree is folded in such a simple technique that in a couple of minutes you will create this magnificent gift or souvenir that can be stored on a shelf for a long time.

You will need three blanks in the form of semicircles of different diameters, on which make such a fringe. Then fold and glue each sample to form a cone. Then, on the largest cone, put a little less on top and then smaller.

There is another option, which is made of one paper cone and pasted over with circles. He looks amazing, you can't take your eyes off him.

By the way, I found a similar work in this story, who needs to dare. There, the author came up with the idea of ​​making mugs with the help of one little thing, in general, see everything for yourself.

In addition, you can still completely fold the Christmas tree in this way, using circles as a basis, and use wooden caps instead of a stand.

If you are overwhelmed wrapping, then twist a bag out of it, cut off the edges so that they become round at the base and decorate.

Moreover, you can make a huge craft in this way, while gluing several cardboard sheets.

Then decorate the cone with packaging and glue the edges to the base.

Trim everything you don't need and decorate with stars or balls.

Now let's do the craft using cardboard, which we will fold.

To create such a product, print out this stencil.

After attach to the cardboard and circle the stencil, cut it out. And fold it in half. Make 8 pieces of such products.

Pass the edges of each Christmas tree with a hole punch, and then, where the middle is, the fold line that you made before, walk along it with double-sided tape.

Now it remains to sew the edges, where the holes are.

Apply glitter or artificial snow from an aerosol and put a star on top.

Next work, take a cardboard base and stick a stick into it and secure with glue. And then cut out circles of different sizes from old postcards and stick them on a stick.

Something similar can also be done from wrappers or just newspaper or magazine sheets.

Or you can create a souvenir from children's hands. It also looks good, especially since schoolchildren or preschoolers are always happy with such work.

By the way, here is another idea from a newspaper or magazine.

Can you make a green tree out of an accordion? Fold a salad-colored office sheet in the shape of an accordion and pierce the middle with a hole punch. Insert a stick into the resulting hole.

Among other things, on the Internet, I saw such a lovely composition.

Who is much for what, there are so many ideas, take it and do it, friends.

A simple toy can even be obtained from ordinary ribbons, which you cut, and then roll up with a snake and connect.

Here are a couple more ideas, write your suggestions or corrections, how and from what else you make such pretty Christmas trees.

Even from the leaves for recording, and then, they managed to create a real masterpiece.

For kids kindergarten such a work is suitable, take a thick cardboard and cut it in the shape of a triangle. A base will come out, on which ask the child to stick the strips.

Well, in conclusion to this chapter, here is another invention, this is a quilling herringbone.

Master class on making a New Year's tree from napkins

It turns out that you can also quickly build a Christmas tree from ordinary napkins, and if you fantasize with color, it will turn out to be absolutely unique.

Such a masterpiece is made in such a way that circles are drawn on a napkin, and after that the middle of each figure is connected with a stapler. Then cut along the contours of the workpiece.

And straight to the middle, start to crumple the edges, lifting them up. To make a flower. And then glue to the conical base, which you make in advance. You can even decorate in the form of a topiary. Here, decide for yourself.

In more detail, if you are interested in this work, you can also use this step by step instructions in pictures:

Tree stencils for cutting and printing

For those who love vytynanok-style masterpieces, they will take these stencils as a basis. Using a regular clerical knife, cut a Christmas tree, or you can take a special tool that the masters of this business have.

Cut out two blanks at once, cut a strip on top of one, and cut a strip on the bottom of the other.

Here are a couple more ideas, what beauty can appear, see for yourself. Delicate and white forest beauties that are so attractive.

Take a leaf and crush it in half, draw patterns and outline the spruce. Cut out all the pieces with a cutter.

Take your time, this job does not require fuss.

You can print the template, and do not fold and draw a tree yourself. Don't forget to leave gaps on the bottom of the paper as well so that you can roll them up and glue them later.

That's what I mean. As soon as you make these two blanks, connect them together.

And I suggest downloading stencils right now from my blog:

. Here I propose to arrange them unexpectedly, namely, use the origami technique. This can be done using ordinary triangles, which are obtained by folding ordinary squares.

The next work, for its implementation you will need two sheets. On one, you print out a Christmas tree and make cuts along the dotted lines, and then glue this blank to the background.

Whoever does not understand the stages of work in this picture, he may well use the video hint.

Another masterpiece, using the same origami technique, you will get a cool little thing that you can give to your mother or loved one. Watch the instruction and repeat step by step.

Here are some work ideas you can take as a basis.

Paper Christmas tree on the wall

For a long time I could not find suitable option but then I came across these ideas. It turns out that there is nothing difficult in creating such a huge and huge Christmas tree. See everything for yourself, and wonder, because it's so great when you and your family are together.

In addition, I also found an awesome paper beauty that can be glued to any wall.

This decor can decorate any children's room or a room in the garden. I was struck by this idea and I share it with you. You need to download the templates (you can ask me for them, I send them to your email address for free). And voila, let your imagination run wild, color with your children. The file will contain 22 stencils that need to be printed on a large A4 sheet and then decorated.

Here's what you can do, keep it up. By the way, there are other options for coloring for the New Year for children, go ahead and take note.

Tadam, that's all, the article has come to an end. It was a pleasure for me to share everything that I found. I hope you enjoyed your browsing through this page.

Everyone have a good day and sunny mood. Bye!

Best regards, Ekaterina

Christmas tree for sure main attribute the most important winter holiday. You can’t do without a forest beauty, the atmosphere is not the same, and where kind grandfather put gifts? It so happened that a Christmas tree is decorated in the house for the New Year holidays: someone puts a live one, someone prefers an artificial one, and someone paper.

A paper Christmas tree can not only replace a needle tree, but can also be used as a Christmas tree. Christmas toys, a unique gift for relatives or simply decorate the desktop in the office, reminding you of the upcoming weekend!

We have collected for you the most interesting options DIY paper Christmas trees.

See more paper crafts:

Time inexorably runs forward and now white flies are flying outside the window, slowly sinking to the ground and covering everything around with a snow-white fluffy veil. However, despite the cold, the soul is warm and joyful. And all because suddenly appeared snowflakes herald the onset of the New Year. Most main holiday the year is already very close, which means it's time to think [...]

#6 Christmas tree from wrapping paper

#8 Simple Christmas tree made of colored paper

#13 A cute Christmas tree that will decorate your desktop

You will be interested:

Of all the variety of bright, colorful and sincere holidays, perhaps the most beloved and long-awaited is the New Year. Thanks to this holiday, the whole family can get together, relax and have fun. But it's not only that. The New Year is shrouded in a special atmosphere created by holiday decorations in the interior. You can start planning preparations for the New Year's Eve in advance. For this […]

# 16 Paper Christmas tree for patient needlewomen: master class

#26 Paper Christmas tree with snow effect

#27 Japanese paper Christmas tree

#28 Christmas tree made of paper pyramids

#29 Simple paper Christmas tree that even kids can make

New Year is the most favorite holiday of the smallest residents of the house. Do not deprive them of their joy and together make a beautiful decor. For such a Christmas tree, you will need thick paper for the base, a lot of colored paper circles, and glue.

And here is another paper forest beauty that children can handle making. Well, joint creativity with parents - what could be better for little fidgets!

Star Pattern

#32 3D Christmas tree made of paper: making a Christmas tree with children

#33 Fluffy crepe paper Christmas tree

#34 How to make an origami Christmas tree with your own hands

#35 Origami paper Christmas tree

#36 Simple origami Christmas tree

Help us become better: if you notice an error, highlight the fragment and click Ctrl+Enter.

Forest beauty from crepe paper. Master class with step by step photos.

Alena Bastrykina, 11 years old, studying at the “Needlewoman” Association of MBU DO Lesnovsky House of Children's Art.
Supervisor: teacher additional education Novichkova Tamara Alexandrovna MBU DO Lesnovsky House of children's creativity.
Work description: master class is for children school age, teachers of distance education, technology teachers, educators, for those who like to create unusual things with their own hands, creative crafts. A green beauty made with your own hands will bring a lot of pleasure and great joy. The Christmas tree will be a wonderful gift for the holiday and decorate the room.
Purpose: for an exhibition of crafts for the New Year, interior decoration.
Target: making a Christmas tree with crepe paper cones.
Tasks:
- to interest and involve in the work of making a Christmas tree with your own hands;
- to consolidate previously acquired skills in working with crepe paper;
- develop individual Creative skills, artistic taste;
- develop fine motor skills in progress;
- to cultivate a sense of beauty and harmony, independence in the manufacture of crafts, accuracy in work;
- foster respect for nature;
- create a festive mood.
Materials and tools:
- green and brown crepe paper;
- glue "Titan", glue stick;
- plastic stick for the barrel;
- wire, scissors;
- artificial snow - spray;

- Christmas tree stand;
- Styrofoam;

I live in a village called Lesnoy. This is because it stands surrounded by forest. Basically it is a mixed forest. But there are large areas of coniferous trees. Yes, and on the territory of the village grow beauties spruce. They were planted by the first residents of the village near administrative buildings, schools, houses of culture, hospitals, kindergartens, in Victory Park. Many years have passed, the Christmas trees have grown, and green beauties delight with their outfit all year round. And the day before New Year's holiday, Christmas trees light up with multi-colored lights. It's so cool! Living Christmas tree became the centerpiece of the village. I love looking at the tree. And before my eyes there is a tall tree, leaving with an arrow-top in the sky. At the very top you see many, many cones, and below, powerful and at the same time graceful branches spread out to the sides. It smells of pine needles, and a wonderful aroma fills everything around. Spruce in all seasons looks elegant and solemn. Since ancient times, it has become a custom to put up a Christmas tree on New Year's Eve. But we must think that for this temporary pleasure, the Christmas tree pays with its life. Many years pass before an adult spruce grows from a tiny seed. Rains water it, strong winds bend branches to the ground, the sun burns delicate green needles. And the Christmas tree is trying to survive, to survive. Every person should know the law on environmental protection and try to save spruces from cutting down.
Not a leaf, not a blade of grass!
Our garden has become quiet.
And birches and aspens
Boring stand.
Only one Christmas tree
Cheerful and green.
It looks like she's not afraid of the cold.
Apparently she is brave.

To make you feel the approach of the New Year holiday, I propose to make a Christmas tree with crepe paper cones.

Stepping through Christmas trees.
First stage. Making cones.
We take brown paper, cut off pieces 4 cm wide from the roll. We cut strips 15-20 cm long according to the number of cones. (The length of the strip depends on the size of the bump)

We start rolling paper. We lay the corner, firmly pressing it with the fingers of the right hand. Once again, lay the paper with a corner towards you.

With the left hand we hold the corner, and with the right hand we turn the paper away from us. Again a corner to yourself and away from you. It turns out the "eight" or a kind of zigzag.

It turned out such a twisted strip. I want to say that not everyone can do such a twist right away. But if you practice, you will definitely learn and get great satisfaction. This way of twisting paper makes it possible to make beautiful flowers.

We begin to form cones. We apply a little glue to the edge of the paper, put a piece of thin wire and twist the strip from top to bottom.

It turned out here is such a small cone. To prevent the paper from unwinding, glue the tip.

We make a lot of cones of different sizes. Put them aside and move on to the next step.

Second phase. Making branches for the Christmas tree.
Cut the roll into pieces 5 cm wide.

We straighten the paper and cut strips 10cm, 15cm, 20cm long.

We fold each blank with an accordion and cut it from one edge into narrow strips 0.5 cm wide, not reaching the other 1 cm. It turns out fringe.

We twist each strip with our fingers, turning it into a thin “needle”.

We make a lot of stuff like this. Everything will depend on how tall your Christmas tree will be and how patient you are.

From the obtained blanks we twist the branches, winding them spirally on the wire. We get branches with "needles". We make the branches shorter for the top of the tree and longer for the bottom of the tree.

We collect small twigs into branches, twisting them with wire

Prepare branches with cones. We take a blank with "needles" and wind the cone. Do not forget to glue the paper at the end of the branch and twist it with your fingers.

We collect branches with cones into large branches.

We make a lot of branches with cones and without cones for the lower tier of the Christmas tree.

Third stage. Christmas tree assembly.
We form the crown. We take a long workpiece and wind three small branches with small cones to it. We wrap the wire with a strip of green paper, forming a trunk.

We attach the branches of the second, third tiers and again wrap the trunk with green paper. We leave 5-6 cm between the tiers.

To make the tree thick, on the next rows we fasten four branches to the trunk

Our tree is getting taller and taller.

Let's lengthen the trunk by tightly wrapping another piece of thick wire, decorate it with green paper. Let's add two more layers.

We attach the largest branches. This is the tenth tier. You can admire the tree in all its glory. We put it on a stand. The height of the tree is 60 cm. This technology allows you to create Christmas trees any size. The main thing is to stock up on paper, wire and of course patience.

Let's look at it closer and from all sides.

Fourth stage. Let's set up the tree.
We cut the circles from the foam to size, make a hole in them and insert the Christmas tree into the prepared stand.

We install the tree. We correct the branches, straighten the "needles".

Sprinkle with snow. Sprinkle the branches with snow - spray.

Grandfather Frost did not take long to wait. Brought a big bag full of gifts.

We looked at our Christmas tree and realized that we had not chosen a stand for it very well. Too tall. Long tried on pots, jars. We chose this option.