A new synthetic material was largely distributed among checkestruants - Foamiran, which was brought to Russia from Iran. He was given to other names: Fom, Fom Eva, Foam, plastic suede, jelly, but they all happened from the name of the company Foamlran COM. The material is distinguished by magnificent plasticity and stretchability, so the master can give it the necessary form that Foam will remember and fix. Such a feature appears under the influence of heat when FoamiRannahery the warm iron or catching. Such qualities of synthetic material make it possible to use it to create bouquets, dolls, accessories and many other elements of creativity.

Stock Foto Flowers from Foamiran

With great success, the French is used to create artificial colors, since the described properties of the material allow you to make bouquets with incredible similarities that are difficult to distinguish from the present. To make sure their natural form, you can see the following photos.

Gentle lily, in the process of working on which the painting of petals was carried out:

Violet Astra as two drops of water look like a real:

Tea gerbera in the basket:

Brooch rosette from jelly:

Mac in a vase:

Templates, patterns and patterns for creating flowers from Foamiran

Everyone can learn to do them, because the technology does not require special skills and understandable even for beginner needlewomen. To make your first craft, you will need only patterns or templates of the product you like, as well as necessary materials and fixtures: Foamiran, scissors, thermopystole, iron.

Peony Pattern:

To make pansies, it will take the following pattern:

Newbie can be tried to make Astra. Aster Sheet Template:

For inflorescences, use the following scheme:

In needlework stores, pcala-five hundred travelers for which you can make blanks from plastic suede. For the same purpose, confectionery devices are fitted:

Laman-leaf Chrysanthemum:

The following patterns will be suitable for inflorescences:

The templates, schemes and patterns can be downloaded for free and print to make parts blanks.

Step-by-step description of the flower from Foamiran do it yourself

To learn how to make such products, you can buy and read the book on this type of needlework, and you can watch the video in which all successive steps of the creative process are described in detail:

The next master class describes the process of working on a rose:

If everything is done correctly, there must be such a rose:

Guided by the MK with step by step leadershipYou can make any bouquets from Fom Era with your own hands using various patterns.

Stock Foto Colors in the interior of Foamiran

As they differ in their natural species, they are very often used for interior decor. The photo shows examples how such products can be used to decorate your own home:

Secrets and features of creating flowers from Foamira

The properties of the plastic material have their own characteristics, so working with it requires compliance with some rules and secrets that will help make real floral masterpieces:

1. So that the material becomes plastic and retained its shape, it must be heated. If there is an insignificant change in the form of the details, then the heat of their own hands will be enough. But when it is planned to strongly change the shape and stretch a jelly, you will have to use the curling.
2. To give the material to the texture, you can wrap the prepared part in corrugated paper and stroke the iron.
3. If you need to expose the edges of the petals, they need to be heated in any way and turn the toothpicks.
4. It turns out very realistic inflorescences if you make painting petals. For this good fit acrylic paints. To fix the color, it will be necessary at the end of the work to sprinkle with any hair varnish.
5. To glue parts it is better to use hot glue, as it will speed up the work process. Glue made of tube for a very long time.
6. To fix the core, it is better to use the foil ball to which the smallest petals elements are glued.

Foamiran is used in many types of Hendmade, including in creating artificial floral compositions. Thanks to the plasticity of the material and the ability to keep the specified shape, the flowers out of it look very natural. We prepared for you step-by-step master-classes on creating artificial flowers and flower paintings and several selections of photos of designer work.

Foamiran (Socre. - Foam, Fom) - Decorative polymer material used in various types of needlework and festive design. Translated from the English word "FOAM" means "foam". Foamiran really has a plastic foam structure and a velvety surface, to the touch resembles a suede or a dense velor. This allows you to give petals, leaves and stems of artificial colors. Natural looks and close to natural bends and outlines.

Foamiran properties:

• stretched material and plastic;
• able to accept and maintain various forms;
• amenable to twist and tease;
• easily cut and glued;
• well absorbs dyes;
• does not smell;
• non-toxic (suitable for children's creativity).

Required forms, textures and waviness, the phoamiran is given when heated, stretching, twisting, rubbing. It is important to remember that the extensibility of this material is not too large - only 10%. Therefore, it is necessary to work with it.

Types of Foamiran

Foamiran is manufactured in Iran, China, Turkey, Korea, as well as in some European countries. The standard of quality is the material of Iranian production. Release Foamiran in sheets or rolls of different formats and different density. Palettes that offer manufacturers can withdraw up to 36 different colors and shades.

Medium density material (Iranian, Chinese, Korean) is ideal for creating artificial colors and floral compositions. Thin Foamiran (silk, marshmallow) are chosen for the manufacture of stamens, small petals and leaves. For large parts, such a foamyran is better not to use, as it does not hold the shape well.

By structure, Foamiran happens:

• Ordinary. Depending on the country's manufacturing country, it is called Chinese, Iranian, Korean, Turkish, etc. The usual Foamiran has not too high stretchability, when heated on the iron it is folded and significantly decreases in size, "runs off". It is worth considering when painting flowers elements that will be processed by heating.
• Marshmallow. The differences of the phoamyran of this species is low density, lightness and visible aerial, small-pouring structure. Heat the Marshmallow Foamiran can not: The material instantly begins to melt, bubble, bond. It is also not worth seeking the waviness of petals in rubbing, the material will inevitably lose the form. The advantages of marshmallow foamyran are high extensibility, elasticity and decorativeness.
• Silk.By properties, silk Foamiran is close to the marshmallow. It is pleasant to the touch, practically an invisible, air, easily turns into the thinnest film. It is well amenable to rubbing, twisting, stretching. Perfectly retains the acquired form. When heated, it is thinned, becomes translucent, acquires a beautiful matte shine. Silk Foamiran is much easier, softer and more elastic than usual and mooring.
• Decorative.Decorative is called Foamiran with additional textures: embossed, relief ornaments, plush and wicked coating. For the manufacture of artificial colors and compositions of them, decorative Foamiran is practically not used. It is more often used as an additional material when creating hair hoops and decorations with floral elements, applications, thematic compositions, photophone, festive scenery.

What is the Foamiran?

Foamiran is great for creating artificial colors, floral panels, paintings, ornamental compositions, but not only. The material is used for scrapbooking, appliques, artistic collages, garlands, etc.

How to make flowers from Foamiran do it yourself, master class

To create artificial colors and flower compositions, in addition to the Foamiran of various colors and shades, you will need special tools: bugs, moldes, weights, etc. To have an idea of \u200b\u200bhow these devices look like, what are the features of working with them, we recommend watching a video.

The sequence of manufacturing colors from Foamiran:

1. On paper or cardboard draw patterns of flower elements: petals, pestles, stamens, leaves, stems. Cut them.
2. From the phoamiran, the necessary colors and density make the required number of parts.
3. For giving artificial flower Similarities with real petals and leaves are toned by acrylic, oil dye or dry pastel.
4. Each element of the flower is carefully treated, giving the desired form, texture and volume. For this purpose, the techniques of heating, stretching, mistresses, etc., are used with moldes and other special devices form bends and close to natural drawings of residences.
5. Consistently collect flower: fix the wire stalk, petal circumference and leaves.

To begin with, we will offer you a simple master class on creating artificial mallow from Foamiran.

• foamiran: for petals - pale pink or carmine; For stamens - milky white; For leaves and stem - dark olive;
• paper templates;
• flexible wire number 30;
• pastel dry - Salad, pink;
• flox powder for toning petals (can be replaced by a painted semi-creek);
• mold and Weiner (Kattleya kit);
• floristic tape ribbon - dark olive.
• heating device;
• scissors;
• pencil;
• fast precipitating glue.

How do Malva do:

1. According to the prepared templates of Foamyran, they cut out: six squares of red or pink flowers (5x 5cm), one square 2 x 2 cm of dark green color and two rectangles of milk-white color (0.5 x 3 cm and 2 x 5 cm).

2. At the end of the flexible wire make an oval loop. Very firmly screw the strip of white phoamyran (2 x 5 cm). The resulting roller is pressed to the iron, forming a tagging and at the same time twisting the edges.

3. The white strip of phoamyran 0.5 x 3 cm strokes, thin. On the edge of scissors make the finest bchromu. Print the finished part around the circumference to the chipping, retreating about 0.7 cm from the lower edge.

4. Schinka Malva is dipped into glue. Tonat yellow phlox powder. Completely dry. Pooh can be replaced with a painted gouache or watercolor semolina.

5. The billets of the petals are heated alternately on the iron, after which they quickly applied to the mold and cut through the contours. The upper edges are carefully pulled out, thinning and forming a wavy kaym. The bases of the petals are treated on the bulk, making recesses.

6. The dry pastel of Malva Petals is toned on both sides. For a smooth, natural, flower transition make a thorough decisive pastels.

7. Alternately lubricate with glue the invasive edge of each Petal Malva. Fasten them around the circumference to the stalk (under the fringe of the stamen). Form a bowl of flower: the petals are pointing the glue and fasten them with each other.

8. From the dark green square of the Foamyran (2 x 2 cm), the asterisk is cut out - Chasselistic Malva. Pershed fingers, thinning and pulling edges. In the center of the finished chalist, they make a hole, put it on the stem, stick under the petals.

9. Surround the free edge of TEYP-ribbon wire.

Rose from Foamiran do it yourself, step by step with photos

What materials, tools to prepare:

• foamiran - herbal-green, cream;
• acrylic dye (or dry pastel) - carmine, green and yellow colors;
• self-healing polymer clay;
• sponge;
• pliers;
• nippers, scissors;
• wire number 20, 24;
• toothpick;
• mold + Weiner "Rose" or universal;
• iron;
• adhesive pistol.

How to make a rose:

1. Prepare templates, lay them on a sheet of phoamyran, rub the toothpick. Cream Foamiran carved: 20 pcs. Large petals (≈ 5 x 6 cm), 7 small (4 x 4.5 cm). From green: 5 leaflets (5 x 6.5 cm), 1 sewelistic (7 x 6.5 cm).

2. Tonat the petals. On the base they apply a yellow and salad dye. By contour of the upper edge - carmine. Tint transitions are cut.

3. Purify rose petals beautiful shape. Alternately applied them to the iron, after which they are folded by the harmonic and twice (from the top edge to the middle). As a result, rose petals from Foamiran should become thin and wavy.

4. With the help of bugs (or hands), the bulge at the base of the petals is formed.

5. Gently rub and thin the upper edge of the petals.

6. The billet is also heated on an iron. Locked on Molds, pressing strongly. The edge stretch a little to give waviness.

7. The workpiece of the cup is heated and twisted, as well as petals.

8. Is polymer clay Form a small ball, give it a drop-shaped form. At the end of the wire make a loop. Fasten the harness from clay on PVA glue. Fully dried.

9. Printed to clay "drop" inner layer of 3 small petals. Compress, forming a dense bud. Excess Foamiran is cut. The edges are slightly straightened.

10. Fasten around the circumference of the second row of 4 small rose petals. Then the third - out of 5 large, the fourth - from 7 large and fifth - from 8 large billets of petals.

11. On the stem, the base of the flower is applied with a drop of hot glue. Give to cool. Green Foamiran is cut by strips with a width of 0.7 mm. The edge of each resulting tape is cut at an angle of 45 °. Glue is applied to the tips of the bands, they attach them to the wire and turn it tightly around, forming a stem.

12. On small segments of the wire (also wrapped with green foamiran), leaves are attached, after which they are glued to the stalk. In a similar way, the cup of the founding of rose petals is fixed. At the end of the work, the stalk turns into a second layer of bands from Foamiran.

Little wildflowers of Foamiran do it yourself, step by step with photos

Small wildflowers will be useful for brooch, hoops and hairpins, beautiful floral compositions. Billets can be made from cropping multicolored phoamyran. In order not to spend time on patterns and painstaking cutting of miniature parts, it is convenient to use a figured hole. In this master class, we will tell how to make cornflowers from Foamiran.

What to prepare for work:

• foamiran ordinary either marshmallow - ultramarine, purple and green colors;
• dense compressed paper;
• scissors;
• klya pistol;
• wire;
• foil;
• figurine punch;
• nail scissors;
• iron.

How to make cornflowers:

1. The details are made using curly holes or templates. For one flower, we need: seven-eight petal circles with a diameter of 3-4 cm and one strip of 2 cm wide from ultramarine or purple phoamyran; Three green strips, 2 cm wide; Two or three long sheets of arbitrary shape.

2. On the edge of each petal make a small incision. Manicure scissors cut narrow wedges.

3. Prepared strips of green and purple colors up to the middle are cut with a fringe (as thinner as possible). The edges are trimmed at an angle - first on the one hand, then, changing the direction of the cut, from the opposite side.

4. The edges of the strips with a fringe slightly melt on the iron (up to light folding).

5. Sheets are embedded into pieces of dense compressed paper and heated on an iron. Then the paper is tightly pressed into hot blanks, bend twice and leave in this form before the cooling.

6. The core of the cornflower (sliced \u200b\u200bfringe) is collapsed by a roll, melt one edge on the iron, after which the workpiece is tightly compressed and twisted.

7. The petal circles alternately (without heating) are scrolled by their hands at the base, slightly stretching, thinning and forming small flowers. One workpiece is left untreated.

8. Collect cornflowers. On the segment of the wire make a loop. Lubricated with glue and wrapped with a lilac strip with a fringe - a seats of the corner. The rolled petals are glued in a circle. They must be slightly above the core. Petals flush. The raw petal circumference closes the base of the finished flower.

9. From a piece of foil form the bulk base of the cup. In several tiers, it is covered with her green strip of phoamyran with fringe. Fasten from the base of cornflower.

10. The flower stem is neatly, slightly stretched, turn the thin strip of the phoamyran. Slice to the leaves stalk.

Pictures of flowers from Foamiran do it yourself, step by step with photos

In the next workshop, we will tell you how to create a bulk picture from the Foamiran "Sakura in bloom."

What to prepare for work:

• rectangular frame - (30 x 18 cm);
• foamiran marshmallow - pink and dark green;
• acrylic paints - lavender, pale pink, brown, green;
• pVA glue;
• pearl beads - white and golden;
• napkins;
• art brushes - flat and pointed;
• glue pistol;
• scissors;
• iron.

How to make a picture from Foamyran:

1. Create the background basis of the composition in the lavender-pink tones. It is possible to draw it on landscape paper, a sheet of watman or phoamyran suitable to the size frame. Color transitions are cut.

2. After the background is dry, draw the brown paint contours of the house with a roof of a pagree.

3. on separate sheet Picture contours of the branches of Sakura. Gently samples with their treated PVA glue pieces of napkins. Surride.

4. The dried branches of Sakura are separated from paper, attach to a background basis, and then tinted with brown dye.

5. By template or with the help of curly holes, flowers and leaves of sakura are cut. It is necessary to prepare 25 pale pink flowers with a diameter of 3 cm and 4 cm and 30 green leaflets of arbitrary shape.

6. Mines of pink blanks are toned with a dye of the carmine shade.

7. Flowers are heated alternately on an iron. Then the sedocks pressed the finger, form the volume and bending of the petals.

8. Billets of flowers and leaves are beautifully distributed on the branches attached to the background. Fixed with an adhesive gun.

Mains decorated with pearl beads. Insert the finished composition from the Foamiran into the frame.

Bouquet of flowers from Foamiran do it yourself, step by step with photos

What to prepare:

• foamiran marshmallow - lavender, white, pink;
• foamiran ordinary - herbal-green;
• flexible wire number 20;
• pUBBETER;
• decorative tapes;
• foam ball (diameter - about 15 cm);
• scissors, pliers;
• glue pistol;
• if desired, decorations (beads, lace braid, fatin).

How do a bouquet of chrysanthemums from Foamyran:

1. On the patterns, the required number of hexagons from lilac and white phoamyran is cut out - the whites of future flowers. For each chrysanthemum, you need to prepare: 4 parts with a diameter of 4 cm, 3 parts - with a diameter of 5 cm, 4 - diameter 6 cm.

From one Foamiran strip, it is convenient to cut several blanks at once, folding the material by the harmonica. For a beautiful and lush bouquet, not less than 25 flowers of different shades will be required.

2. On all the wedges from the edge from Foamiran, 6 incisions are made from the edge (for the formation of needle petals). External contours spill.

3. On the petals of the central whites (for each flower, they will become 2 hexagon with a diameter of 4 cm) make two additional extrem.

4. The finished petals of chrysanthemums from Foamiran are tinting pastels. A pale green pastel is applied to the center, along the edges - lavender. The contours are riveted with a wet fabric napkin.

5. The blanks are heated alternately on the iron, after which they are folded in half and twisted with a dense harness. The edges of the petals slightly thin and give them a light waviness.

6. With the help of iron and module, the "leaflet" of a suitable configuration of herbal-green phoamiran makes chrysanthemum leaves.

7. The wire is divided into segments of 8-10 cm. The end of each segment is twisted with a loop. Make flowers. A drop of hot glue is applied on the loop, cool. The wire is made through the middle of the central whisk of chrysanthemum, with force pressed the workpiece at the base. On top glued the second central whisk.

8. In the same way the remaining blanks are fixed in the same way: initially the inner bins with a diameter of 5 cm, then external - with a diameter of 6 cm. For convenience of work and the natural type of flower, some elements are cut on a semicircle.

9. The foam bowl is divided into two parts, one of which is covered with a layer of PVA and insert into the portboot. For additional fixation, non-screenshots are used, which are fixed on the holder.

10. From each flower is cut off the free part of the wire. On the base, chrysanthemums are imposed and fasten them to the portboot concentric circles. Start drawing up a bouquet from the center. Between flowers arbitrarily placed leaves folded in half.

11. The finished bouquet is wrapped with folded folding paper. Complete the design of the composition using decorative braid, tapes and other accessories.

Compositions of flowers from Foamiran do it yourself

Large flowers from Foamiran do it yourself

Schemes Growth flowers from Foamiran do it yourself, photo

Buy ready-made flowers from Foamyran, as well as materials and tools for their manufacture can be in the online hypermarket. Prices in the catalogs of the Chinese site are very moderate, besides, it is possible to order most of the goods with free shipping.

To select artificial, click "Categories. Watch all »On the start page, in the partition table, click" House and Garden "\u003d\u003e" Interior and Decor ". In the catalog opened - "Decorative flowers and wreaths".

Different types and colors are better to make a direct request "Eva Foam Paper" in the search field of the Aliexpress main page. You need to open the section "Decorative Flowers", after which in the search bar, type the clarifying request "Moulds Flower". Buy

2. Expand the product card in the directory. Check out the characteristics, delivery time, delivery type. Choose Foamiran colors, the number of sheets or rolls. Click "Buy Now" to start making a purchase.

3. Fill in the Latin font graphs of the address form. Save the data for the following orders on

5. Select payment method. To calculate the credit card, click "Map", enter details, click "Pay Now".

For payment from the electronic wallet, cell phone balance or cash click "Other methods ..." and select the appropriate on the additional tab. To complete the payment, follow the system prompts. To find out if the payment is confirmed, whether the order is sent, and you can also get information about its mail status in the Personal Account.

In conclusion - several detailed video tutorials for the manufacture of flowers from Foamiran:

1. Useful tips for beginners

If you want to make a truly valuable gift with your own hands , pay attention to such a versatile material for the manufacture of elegant crafts, as. This material is often used in the production of details for children's educational games, dolls, rugs. But our craftsmen have long found the use for this plastic suede - Foam in their work, from which are createdoriginal handmade flowers. Peonies, Roses , gladiolus, lilies, asters from Foamiran literally come to life in the hands of craftsmen, who have just createddo it yourself these decorative flowers.

In previous materials, we posted a step-by-step master classes for you and video lessons in which simply outlines waysmanufacture of homemade colors (Peonies, roses) from Foamyran. In this article you will find tips, MK, video lessons for beginners. If you first get acquainted with the properties of this amazing material, we advise you to start your creative way with creatingsimple flower To decorate a hairpin or gum on the hair.

3 useful advice for beginners:

- What kind of foam is better?

before you start work and make your first flower yourself , It is important to choose the material. Foamiran is sold or in the form of sheets or rolls and can have different names on the package - Foam, Fom, EVA, plastic suede. But there is an option, on the packaging of which foams is written - this is a porous tires for children's creativity andbeautiful flower It is very difficult to make it.

There are Iranian and Chinese options for Foam. Experienced Master We use both options with the same success in our work. But beginners we advise you to use Iranian Foam, from which it is easier to make petals of the right form

- How to give petal fit?

This material is very plastic. It is enough to remember the Foam with warm palms and can be folded, twisting, bending it, changing the form.

Many needlewomen are used in working with a foamifrace heat treatment with iron. You can heat the iron (at a minimum value) and join the warm sole of the workpiece cuttered by the template. A few minutes later they will disappear, after which you can do any form of petal . If you didn't like the form, you can always change it, putting the workpiece again to the sole of the iron and starting everything first.

- How to make a blank from Foamiran thinner?

In order for our decorative flower to be elegant, with thin "air" petals, it is desirable to use a thin sheet of foam. But what to do if there is only thick material in a roll at hand? There is a way out!
At first, we cut the blank in the form of a petal, and then begin to mive diligently and rub it in the palms, the maximum release of air from the material bubbles. Then we apply the workpiece to the sole of the iron and after heating a little stretch it with your fingers.

2. How to make a flower from Foamyran

There are many ways to make crafts from plastic suede.

Consider the classic stages of creating a flower from this material:

Cut from the sheet (or roll) of the phoamyran, a few strips of 3 cm. Cut the squares of 3 by 3 cm. By template (from cardboard) Cut the flower petal from each square. The number of petals depends on the type and size of the flower . In order for the color of the petals to look realistic, it is necessary to cut them a little along the edges and at the base of pastel shallow or paint.

Now we must give the billets the realistic form of petals. For this purpose, each in the warm palms, pull, form the folds with your fingers (you can use special bugs for florists and the heated sole of the iron).

When all the petals are formed, we start collecting them in a flower bud . Completed option - at the end of a thin wire, we make a loop, we apply a little glue from the adhesive gun and turn around the petal loop. After that, we glue each subsequent petal in a circle at one level in height

Now we will make the manufacture of cups so that the flower looks more realistic. On a leaf of a green foma on a template, draw the contours of a cup of teeth with a toothpick and cut out. Manicure scissors make small jar along the edges of the workpiece.

Make a leaf flower. By the template, cut out the billet of the leaves of the floor of the green color. Now we will apply the drawing and relief on each leaf with moldes (forms, relief blanks and special castings). It remains to give the flower leaves a natural look by changing their shape to heat treatment.

How to quickly make a simple flower of phoamyran for a gum into the hair:

For work, you will prepare the following tools and materials: Foam sheets of green and purple flowers, iron, manicure scissors, adhesive gun.

Stages of work

√ Cut from the rubber sheet of the rectangle 8 cm width and horizontally folded in half. Glue by adhesive gun

√ From the side of the bend at equal gaps cut through the blanks. The billet will take a thought of comb. We turn it out several times and fix the shape with a glue gun

√ Now make the flower leaves, drawing the contour by the pattern on a green leaf of green. We applied streaks (you can with a toothpick) and sculpt to the sole of the iron. After heat treatment, give leaves the desired form.

√ It remains to stick to the inside of the hair gum circle (base) from Foam and from the outside of the accessory to glue the bud and leaves to the base.

3. Workshop classes for beginners. How to make a flower from phoamyran in different ways

Master class 1:

How to make a simple but very elegant Flower from Foam. A step-by-step lesson with practical recommendations - we form the petals and add them to the bud, make chasolesters and a cup.

Master class 2:

We make a very gentle and elegant flower from Foamiran for decorating postcards, glasses, ornamental jewelry. MK with photos and examples of work masters.

Master class 3:

Two lessons for beginners.

1. Decorations in the form of flowers from Foamiran for women's accessories

The previous series of articles on the site was dedicated to the amazing technique of Kanzashi with the help of which we learned to dodo it yourself graceful flowers of satin ribbons. Hair accessories decorated with crafts from pieces of ribbons, very effectively stand out against a stylish hairstyle. But there is a material from which you canmake gorgeous roses , peonies, gladiolus, lilies and other flowers, practically as real!

This is a Foamiran. In this article, you will find step-by-step lessons with a photo, with the help of which even beginner craftsmen will be able to make them different flowers From Foam. And the visual video master classes will help you learn how to accurately attach the right form of petals from Foamyran.

Homemade flower from this material will be , rim, hairpin, hair crest.

The rims decorated with bright flowerflakes from Foam, rhinestones, multi-colored ribbons, bows of ribbons, especially stylishly.

For women who prefer to walk with long loafwood hair , It can be recommended to decorate the hairstyle with ribbons in the ethnic style, which can be decorated with small flower and footballs from Foam. Forhigh styling You can choose tape harnesses or gum decorated with large roses or peonies from this decorative foam material. Look master classes using which can be made surprising beautiful roses from plastic suede.

But the composition of several decorative colors on hairpin is particularly stylishly stylish. Foam's petals themselves can also be decorated with beads, rhinestones, beads and other decorative elements. who are always at hand at the craftswoman.

Product handmade will always be appreciated. After all, you canmake a female accessory For every taste and it will be original suitable for the style of clothing.

2. How simple and quickly make a very beautiful flower of phoamyran for hairpins

Instructions for beginners:

Tools and materials for work: Foam leaf (white, bodily or beige color), 1 rhinestone, 8-12 beery, cirkul, metal ruler, wooden toothpick, manicure scissors, iron, thermochelery gun.

Stages of work:

On the Foam sheet it is necessary to draw 2 mug with a diameter of 7 cm and 3 mug with a diameter of 5.5 cm with a circulation. Gently cut out these billets;

Now take the toothpick and divide each circle to 4 the same parts by the line. Then each segment is divided into two equal parts. Then - again. Total will be 16 identical segments on each billet;

To the center of the workpiece (where all the lines intersect) stick the circus needle and make a circle with a diameter of 2 cm. Scissors cut the workpiece over all lines up to the central mug. It turned out 16 petals of the future flower from Foamira. We form petals on each workpiece;

Now carefully spinning every petal with manicure scissors;

Then you need to heat the iron (not very strong) and attach each workpiece to the sole. After heat treatment, all petals weigly with your fingers so that the billet takes the view of the mushroom hats;

Build a flower. Now we take a thermoclao gun and glue into each other smaller flowers (3 pieces), and then - in flowers bigger size (2 pcs).
Multilayer flower from Foamiran is ready!

It remains to decorating it a little, incurred in the middle of the ride, and on the outside - for each petal, on bearer. Assembled and decorated flower You can stick to the hairpin (or sew to a hair gum, but three such flower such flower is better to make a rubber.

Stock Foto Decoration with homemade flowers from Thomas.

3. Simple master classes for beginners. Cut the petals from Foam and give them the right form

Master class 1:

How to make a beautiful white rose from Foam and tinkering a dirty colors of a cup of burgundy. Lesson with photo stages.

Master class 2:

Two simple lessons for beginner masters, with the help of which you can easily make rose and lily from Foam, giving the right shape to the petals and folding them into elegant decorative flowers for decorations on the hair.

Master class 3:

We do with your own hands.

Master class 4:

From Foamyran you can make hibiscus. This amazing handicraft will be similar to the real flower! We look lesson with photos.

Master class 5:

Making a beautiful rose

The beauty of living colors leaves no one indifferent. Apparently, it is for this reason the needlewomen find all new ways to recreate this natural beauty with artificial materials. Today I would like to tell how to make flowers from Thomas, the master class on the manufacture of such colors is very simple. The softness and compliance of this material, as well as the rich color palette will create truly unique floral compositions.

Stock Foto Flowers from Foamiran

Peony from Foamyran

Today we will learn to make flowers from Foamyran, the video master class will be a very good assistant in this matter, especially for beginner needlewomen. As the first creation, I chose a peony flower.

Due to the plastic properties of the material, as well as due to its unique ability to easily take the desired shape using light heating, the flowers from the phoamyran are obtained very realistic.

So, before creating a unique beauty of Peony, let's prepare all required tools And materials:

• foamiran pink shades (from light to dark pink) and green
• glue (preferably adhesive gun)
• corrugated paper
• scissors
• toothpick
• paints (acrylic or pastel)
• wire (optional)

Pattern of petals and leaves:

Stages of work

So, the first thing is to cut a sheet of phoamyran on equal strips. Thus, it is easier to cut the details of the petals.

As a result, we need to get such blanks:

From the leaf of green phoamyran, cut out the leaves for the flower:

Now we need to give flower petals texture. For this purpose, corrugated paper is useful (color is not important).

Wrap 1 petal in a strip of paper corrugation and apply to the iron for a short period of time.

Be careful not to burn your fingers.

After that, the petal wrapped in paper, we fold the harmonica and twist.

After we break the workpiece, peony petal will get the desired texture. In the photo it is very clearly visible:

Now give some naturalness for the leaf of the flower. We also heat it and strongly twist:

When all petals and leaves passed heat processing And they accepted the right form, we go to the creation of a flower core.

To do this, you can use either a ball of foam or make a ball of foil. If the flower is supposed to be put in the vase, then the core is attached to a piece of wire.

Abluence with a piece of phoamyran:

Now one by one we glue the petals to the core:

Depending on the puff of the flower, the number of petals can vary.

Lastly we glue the petals to the base of the flower and wind the wire with green paper:

The edges of the petals can be toned with acrylic or pastel chalk.

I demonstrated step-by-step creation Peony, but on this variety of colors from the Foamiran does not end.

I suggest you try your hand in creating the following varieties of colors. For example, rose.

This royal flower can easily repeat on its own, following a visual master class for beginners:

I hope you have to taste and are not ready to stop, because I offer you video lessons for creating and other luxurious colors.

Flowers from Foamiran on video

Aster :

Orchid :