Hello girls. For this cardigan, Vita Cotton Charm 106m / 50g yarn is needed 100% mercerized cotton, hook No. 4. The main pattern - the columns without a nakid for the rear semi-one each row. Cross binding. Threads are preferably softer, thicker and more hooks))) 850 grams of yarn took this cardigan.

The pattern prepared according to its size (size 46). All numbers are approximate.

On the pattern with the red arrows, the direction of knitting from the sleeve is indicated, and green arrows - from the center of the back. What way you can knit - decide for yourself.
As for the leaving on the sleeve. The lacc did not do - it was just a straight sleeve, but the main pattern has a property to stretch in the process of socks - therefore the lapse is then obtained by itself.

• interesting selection on the site !!!
• Knitted cardigans For kids. Large digest.

I knit at the same time from two sides at once.

Some questions that arise in the process of performing this product:

Is it possible to knit a single web cardigan without medium seam?
Yes, you can knit and thus simply the Rubber will "look" in one direction.

Is it possible to snatch from the middle seam of the back, thereby knit in different directions from the center?
Yes, you can knit so too. The main thing is that you can be comfortable and comfortable.

Recommendation: I repeat - if you doubt whether you need such a neckline on the back of the neck (both on the pattern), knit a cardigan at the same time from two sides to see two half of the whole. Then the decision will be easier. Perhaps the width of your mouth will not be 14, but less (due to the pulling pattern).

We begin with a chain of air loops (segment A-B) and knit the main pattern of the required height of the sleeve to the segment of the C-E.

Next, from the point with type the desired number of air loops to the point d + in parallel, exactly the same number of loops and from the point E to the point F (thereby forming the shelter and the back of the shelf) (I took the threads from another motor one) and continue to knit also in the direction Knitting to the center.

Then knit on the pattern:

Transverse knitting needles for girls with openwork pattern at the bottom

Cross knitting, jacket knitting needles for the girl

How to knit jacket with knitting needles for a transverse knitting from the left shelf to the right.

The size:6/9-12 / 18 (2-3 / 4)
Size in see:62/68 - 74/80 (86/92-98 / 104) See
Materials: 150-150 (200-200) Drops Baby Merino yarn (100% wool, 50 g. / 175 m.) Colors A and 50 g. Colors in, 2.5 mm., Hook 3.0 mm., 3 buttons.
Knitting density:26 loops * 51 row \u003d 10 * 10 cm. Sweatshirt.

Drinking:all rows knit face loops.
Pattern:perform according to the scheme, the scheme is called with front face.
Tip!When you perform shortened rows - turn the item, remove the first loop not clutch and tighten the thread.

How to knit children's jacket with a transverse knitting needles:

Left shelf: Drink 62-68 (78-88) hinges 2.5 mm. Thread A.
Knit 8 rows with sweating knitting, starting from the facial row.
Track. A row (persons. Party): 3 persons., Knit the following 15 loops, to simultaneously retain 8 loops over them (make a nakid), finish the facial \u003d 70-76 (86-96) loops.
Track. row (out. Side): Persons. Loop., All Caides knit the face for the rear wall (twisted loop).
Next, knit: 3 loops of the handling viscous, the scheme (\u003d 23 loops), 44-50 (60-70) loops of the handling viscous.
At the same time start performing shortened rows (see the knitting advice): * knit 30-32 (38-42) loops, turn, knit until the end of the row, knit the first 46-50 (57-65) loops, turn, knit until the end of the row, Knit the first 64-70 (80-90) loops, turn, knit until the end of the row, knit all 70-76 (86-96) loops, rotate, knit until the end of the row, repeat from *
At an altitude of 16-18 (19-20.5), see from the set of the edge (measuring along the longest side) to trim the thread (\u003d side).

Sleeve:remove the first 41-45-52 (60-65) loops to an extra needle.
Separately, for the sleeves, dial 40-45 (55-64) loops, knit 29-31 (34-36) left shoulder loops \u003d 69-76 (89-100) loops.
Continue to knite from the front side: * knit the first 40-45 (55-64) loops with a handful pattern, knit until the end of the row, knit the first 63-70 (83-94) loops with a handful pattern, turn, knit until the end of the row, knit all 69 -76 (89-100) loops with a handful pattern, turn, knit until the end of the row, repeat from * to a height of 16-17 (18-18) cm. From postponed loops (measuring the longest side)

Back and second sleeve: Close the first 40-45 (55-64) loops of the sleeve, return the pending loops back to the working knitting needles, put the label on each side.
Continue to knit shortened rows on all loops as before.
At an altitude of 28-31 (35-37), see the label (measuring the longest side - the bottom of the jacket) to remove the first 41-45 (52-60) loops to an additional needle, knit the second sleeve as the first.

Right shelf:at an altitude of 16-17 (18-18) loops from postponed loops, close the loops of the second sleeve and return the pending loops on the overall needles, put tags on each side of the work.
Continue to knit short-range rows as before in width as a left shelf.
Track. A number: 3 persons., Knit the next 23 loops facial, to simultaneously reduce 8 loops over them (knit 2 faces together.), Finish a number of facial loops \u003d 62-68 (78-88) loops.
Knit 3 rows of sweating viscous.
In the next row from the front side, perform 3 openings for buttons: 41-45 (53-61)., Nakid, 2 together., 7-8 (9-10) persons., Nakid, 2 together persons., 7- 8 (9-10), Nakid, 2 together people., 1 persons.
Knit 5 rows of boiled viscous.
Close loops.

Finish: Thread white color and crochet bind the bottom of the jacket: 1 tbsp. B / N, * 3 V / p., 1 tbsp. C / H in the 3rd loop from the hook, skip 1 cm. The canvas, 1 tbsp. B / N, repeat from *.
Repeat the strapping for each sleeve.
Sew sleeveless seams.

The most familiar look - longitudinal, when the model fit on the full width of the vertically from the bottom up or top down. But very interesting effects can be achieved when knitting across - from one side seam to another. This technique is especially convenient when knitting models with a wide breakdown and straight sleeves.

Principles of transverse machine knitting. There is considered a partial knitting technology, general rules Perform skirts, jacket and pullover. The principles of implementation do not depend on the technique of knitting - on the needles or crochet, they are the same as in engine knitting, so the article will be excellent to understand the process of knitting and calculating the gains.

After reading the theoretical course it will be easier to understand how the female pullover fit with long sleeves from the site is Rukodelie.by. Used pattern - Polish (it is corrugated) Elastic band - structural pattern, for extensibility more similar to a conventional facial smooth, than a gum. Using calculations and principles, it is possible to knit other models in the transverse knitting.

Ideal for transverse knitting. A simple elegant pattern - sweatshirt tracks (all rows of facial loops), alternating outdoor outdoors. Description View on the site

One of the most simple ways Knitting the transverse gum is considered a handbook. The spokes are very simple: all loops, and all rows knit face loops. The web-bound handful is obtained rather dense and elastic, the edges are not wrapped, the drawing is double-sided. An elastic band is used to process the bottom of various products, a shelf of jackets and blouses, the treatment of the neck and cuffs of sleeves, can also be used as the main pattern of the product.

No less popular among the masters of knitting, the transverse gum 4x4 enjoys. Most often, such a transverse gum is used as the main pattern. Knit gum, alternating among themselves 4 rows facial stroit (Facial rows - facial loops, in the involnee - invalid) and 4 rows of invalid stroit (in the front rows - the invalid loops, in the wrong rows - facial), namely: 1st row: all loops facial; 2nd row: all loops Pouring; 3rd row: all loops facial; 4th row: all loops Pouring; 5th row: all loops Pouring; 6th row: all loops facial; 7th row: all loops Pouring; 8th row: all loops facial; 9th row: repeat from the 1st row.

mittenki knitting

Variants of knitting transverse gum, where the rows of facial and invalid glaolds alternate, a huge amount. Knit, for example, transverse gum: 2x2, 3x3, 2x3, 2x4, 4x5, 6x6, 4x6, it all depends on the product and fancy of the wizard. Spectacular blue mitts are connected by a transverse rubber band 3x3 and a handful viscous. .

transverse gum knitting

Diversify the type of transverse gum, you can use yarn different colorWhen, tied, with the front surface - the thread of the same color, the purl surface is a thread of another color. The number of alternating ranks of an invalid and face alternating, with two-color knitting transverse gum should be even for the convenience of changing the thread.

transverse gum knitting in a circle

For circular knitting The transverse gum replaced the color of the yarn and with an odd number of rows, see the gum diagram 3 x 5.

knitting gum knitting needles, rubber bands, rubber bands, spokes, spokes

Cross knitting is often attractive for needlewomen. Someone like the ability to turn the pattern into the vertical plane, someone knows that the thing ties in this way faster and easier. In addition, it is also the ability to associate a thing in the one-piece option (not counting the sleeves).

We crochet a long cozy soft yarn vest transverse knitting. For knitting, you will prepare an acrylic yarn, feel free to choose a thread with the label "Children's" or "Baby", it means that the thing will be soft, gentle to the touch, will not cause allergies.

We select a color gamut. If one-color vest seems to you somewhat boring, then use the threads of sectional staining, and if the color combinations are soul, then combine one-photo yarn with threads on which overflowing color. In total, 350-400 grams of yarn are needed for vest.

In our case, it was spent: 130 gr yarn "Baby Print" with a long thread 400 m per 100 grams of sectional staining and 200 grams of one-color yarn "DOLLY" with a thread length of 300 m per 50 grams.

The fact that one thread is a bit thinner than the other, the values \u200b\u200bdoes not have, when combining yarn in knitting it will not be noticeable. We use the hook N 3 and the simplest, not a tight mating from the columns with Nakud. The whole effect of things will be to consist in color combination yarn. Also an equally pleasant moment that the pattern of such a vest is a simple rectangle, in the model only two shoulder seam, so even a beginner can cope.

We are determined with the size of the vest. The width of the vehicle, with a transverse knitting, it turns out from the height of the knitted canvas. We remove the three measurements: the backrest length from the point at the bottom of the neck to the desired length (in our case - 92 cm); Then the backrest width, measure it between the extreme points of the right and left shoulder (in our case 54 cm); For the shelves, we make the calculation 54cm: 2 + 7cm \u003d 34 cm (7 cm gain is needed in order to get sides of the vest, you can make them wider or, on the contrary, you can not add these centimeters, then the shelves will get an online rod); The length of the armor is measured from the top point of the shoulder to the level you want to (in our case, 26 cm). For symmetry in the future we will make the same length of the incision at the bottom of the vest so that it is not too tightly tightening the hips.

Knit from yarn sample, 10 x 10 cm to determine how much you need to dial the initial loops. Again, in our case, 92 cm the back of the back was obtained 120 loops.

We start knitting with monophonic yarn. The first row is dialing 120 air loops, plus one loop on the rise. Turn knitting, from the second loop of the row begins to knit columns with Nakud. After six identical rows, add a second thread from yarn with sectional staining, one-time thread leave free.

Knit 2 or 4 rows (there must be an even number to return to the place where the thread from the monophonic yarn), we leave a multicolor thread, again knit a thread of the monocet. Thus, all the linen of the vest, the color shift bands can be the same width, of different widths, are wide and narrow, it is your taste.

Carried in knitting, do not miss the time for the armor. At a distance of 34 cm, this is in our case 44 row, do not take 32 loops to the edge of the cloth. Turn the knitting and knit columns with Caid until 26 cm remains to the other edge of the web, that is, the same 32 loops (with measurements, we determined that the length of the armor and the cut will be the same). The middle part is 56 loops. I make a loop again for lifting and turn knitting. Now we knit a full range by adding 32 air loops from the same side. All numbers are given for example, you can be guided by your calculations for any yarn and product size.


We continue to knit back, observing the same principle as before. Then we leave a place for the armor and the cut of the vest on the other hand, symmetrically previously connected. Complete the knitting left shelf also in symmetry with the right.

The assembly of the vest is very simple. Fold the cloth with the right and left side over the shoulder line and check or sew the same thread that knitting.


Monthly thread Perform a strapping of the entire perimeter of the vest and its Prouches without a Nakid in two rows.

In the top of the vest, beat the corners of the shelves, having received small lapels. They are better to fasten with small butchers in the tone of the product. Vest ready.

Such a vest can be wired freely or with a belt, selected in combination with color gamut things. Knitting is quite simple, the style is suitable for any shape, and the result pleases the eye, so try to perform such a vest will be pleasant and not burdensome. And there is a field for experiments with flowers or mating patterns, so you can connect two, three or four different options sleeveless.