Tilda Snail is not only a toy, but also a decor element, a pad for needles, as well as a very interesting and original gift to a close person. We bring to your attention a detailed master class, how to sew this craft.

Required tools and materials

To sew a snail Tilda, you will need to take the following tools and materials:

1. The cloth. It is necessary at least two shades: the body will be sewn out of the neutral, and from the bright - the shell.
2. Material for packing. You can use as standard padding materials (for example, syntheps, synthelubles, holofiber, and so on) and unusual fillers (for example, aromatic herbs, relaxation balls, and the like).
3. Pencil, marker, chalk.
4. Pattern.
5. Needle.
6. Threads.
7. Scissors.
8. Wand for packing (help evenly and fill toy filler toy).
9. Different decorative elements (butchers, ribbons, beads and so on).
10. Adhesive pistol.

Creating Patterns for Tilda Snail

Snail, the pattern of which is presented below, can be made in two ways:

1. You can find the finished pattern and print it on a sheet of paper A4.
2. Take any paper and draw the pattern yourself. Do not forget that Tilda snail consists of two main parts: the bodies with a pair of ears of the antennok and shells.

Plus, the second way is that it is easier to change the size of the toy.

Snail - Tilde: master class on tailoring toys

Step-by-step instruction:

1. Cut pieces of paper pattern.
2. Take two types of fabric: for the body and for shells.
3. Fold the fabric in half or two identical pieces together. The front side must be inside.
4. Attach the paper pattern to the fabric. To translate the pattern it was more convenient, paper parts can be clap using a pin or needles.
5. Put the pattern on the fabric, for this circle the details of the pencil, marker or chalk.
6. Slip the paper pattern from the fabric.
7. Sisting fabric together. It is more convenient to use a sewing machine, but if there is no one, then you can resort to an ordinary needle with a thread. Stitches must be neat. Details are not fully cut, leave a small hole, into which you will fill the filler. Best of all, let the hole be located in the center of the body and at the bottom of the shell. Just where the items will be connected to each other.
8. Cut an extra fabric, retreating from the seam to five - ten millimeters (the indent depends on the type of fabric: the more crept on, the one should be more).
9. Remove snail details.
10. Tightly type all the details of the filler. While feeding, form a caller, antennas and shell.
11. Gently trigger a secret seam shell to the body. To simplify the task, stick the "house" to the snail with a needle or pins.
12. Make a face. You can cut eyes and mouth from the fabric, and then sew or glue the items. Or draw the face with special colors for fabric or marker. The third option is to lose the thread of eyes and mouth. Fourth - enter the junction of the junction or beads.

Snail-tilda is ready!

Decorating toys

The snail will look not very interesting if it is so left. Here are a few ideas as you can decorate a toy:

1. Sew the strip of lace to the place of the connection of the shell and body.
2. Enclose with a special adhesive gun to the shell. Various interesting elements: beads, rhinestones, bows, figures, and so on.
3. Make a snail makeup with ordinary Rumens and Shadows.

Make your crafts original, for this not be afraid to show fantasy.

Remember that if the toy is intended for a small child, then do not glue and do not sew small details on it, which is easy to tear off and swallow.

Tilda Snail is one of the most simple Tilde, and I believe that the most appropriate for the first experience in the sewing of textile toys. For work we need threads, two types of fabric and decorations: flowers, buttons, tape or braid.

Materials:

• Two types of fabric (for snail taver and shells)
• Threads in tone tone
• Paint acrylic or threads Moulin (for eye)
• Jewelry for our snail
• Safding for toys

Instruments:

• Chalk or special markers to translate pattern
• Scissors
• Sewing machine (if possible and desire)

For a snail torso cloth you can paint coffee, then our doll also acquires a gentle coffee fragrance.

1. Print the tilde pattern of the snail and transfer it to the piece of fabric:

I used a special marker to translate patterns, in my opinion it is very convenient.

2. It is necessary to make two layers of tissue with pins, for the fact that the cloth for work accidentally did not move.

3. Details need to be cut in the following way:

• Snail shell do not cut completely, but only its external contour
• Snail body cut out, leaving 0.5-1 cm on allowances

You can be sewed manually or on a sewing machine, I sow on the sewing machine. I have the easiest sewing machine. Usually I use a line straight, but I choose the stitch length depending on the type of fabric, this snail I sewed 1.5 mm stitch.

6. The next step must be fill the snail with a synthet board or any other available filler. Do not be discouraged if it turns out not quite evenly))) This will give a special charm and charming to your toy.

7. Now the most responsible moment: it is necessary to neatly notify the secret seam of the sink to the snail tank. And do not forget to put a small heart in the Taurus))

8. Our snail eyes can be embroidered with ordinary threads Moulin or draw acrylic paints. In general, someone how to like, but I believe that it is better with the help of threads, if made a mistake in the location of the eyes, then everything can be easily removed, there is no such possibility with the paints. Snail's cheeks can be drawn using an ordinary powder and cotton wand or use grated pastels.

Tilda Snail Ready:

I recommend to decorate the seam on the sink lace. The most suitable is cotton or knitted lace.

I hope you liked it))) I look forward to your snails))

Both bears, and bunnies, and cats, and dogs, and even giraffes, as well as much more. We invite you to find out how the Tilda-snail doll is made (pattern, the master class is attached).

Materials and tools for sewing toys

In order for you to have a real snail in the style of Tilde, you need to choose high-quality natural fabrics. Most often used flax and cotton. Coloring can be chosen absolutely any. But for the body, pick the fabric of beige shades. The shell is most often sewn from a patchwork with a bright ornament.

It is better to use a holofayber or synthet board as a filler. But if you have small unnecessary loskutka fabric, then they will come.

The rest of the materials are at your discretion and in your wishes.

Building pattern

As a rule, all the toys in the style of the tilda of small size. Therefore, you will be enough a pair of A4 Format Format to understand how the pattern is made. Snail-tilde is full size, sewing such a drawing, will meet all the necessary proportions.

On one sheet, the body is drawn with the horns of the future toy, and on the second - the shell-house. It needs to immediately depict spiraloid. At the same time try to "bundle" (see the image of the pattern above). On the torso schematically depict the place of the seashell connection. These are usually simple two dashes.

You can also make it fit to fit on one sheet of the pattern. Snail-tilde in full size will be in this way. Just draw the body and "lodge" on each other, as in the picture below.

It is best when the pattern is drawn on a dense cardboard or loaf. Then it will last longer, and you can sew more toys.

We sew a simple snail

At the heart of all complex at first glance, the Tilda style toys is the main and simple billet.

Instructions, how to make the basis of a snail:

1. We need a tissue of two shades (for example, beige for the body and pink for seashells), a needle, threads, any filler (sintepon, holofiber and so on) and pattern.
2. Snail-Tilde consists of four parts - two on the body and the "house".
3. Fold the cloth in half, attach a paper pattern and cut the items (illustration 1).
4. Sust in pairs of details, leaving small holes in the connecting places (illustration 2).
5. Remove the details of the body and shells.
6. Fill part of the toy filler. To do this, it is convenient to use a wooden wand or pencil (illustration 3). Uniformly distribute the filler on all parts of the body and shells, pay special attention to the head and horns.
7. Sewing holes.
8. Success the shell to the torso (illustration 4).
9. Draw a lurch (eyes and mouth), make a blush.

Preparation is ready. It remains to decorate the toy. You can resort to fantasy or use ready-made tips to get original Tilda snail.

Pattern, master class on decoration toys

The decor of the traditional snail in the style of Tilda includes such an attribute like wheels. They can be made of buttons, large beads, ornamental wooden wheels and so on.

For example, to make such a snail, you will need as decorative elements to prepare four identical buttons, three artificial flower with green leaves, three pieces of multi-colored fabric and filler, bead, ribbon or ready-made bow.

Master class on creating traditional snail-tilde:

1. Slice on the pattern of the workpiece of the toy.
2. The location of the connection of the carcier-house with the torso is decorated with a thin tape of lace. It can be as sewed, and taking the use of a glue gun.
3. Sun on the sides of the body to the body all four buttons.
4. From pieces of fabric you need to sew three small pads. Cut from each loskutka two squares, sew them in pairs and fill in the filler.
5. Fold all three pads together and enter them to the shell.
6. Next to decorate the pillow by a bead.
7. Make and draw it on a snail horn.

Traditional snail-tilda is ready!

New Year's snail

The thematic toy is pretty simple. Beige fabric for the body and red - for the shell. Ideally use material with christmas motifs (for example, snowflakes, deer, bells, snowmen, and so on). Then sustate the workpiece of the toy. For this you need a pattern.

Snail-Tilde for the new year decorated like this:

1. If a fabric with thematic pattern was used, then the shell is not necessary to touch. If the sewer is sewn from a monochrome loskutka, then take the paint (preferably acrylic to work on the fabric) and draw snowflakes.
2. The place of connection "Domika" with a body decorate with the help of lace with pomponchiki.
3. On the horns snails ride a red bow or christmas hat.

Crafts ready!

Other decor options

You can decorate a snail-tilda in different ways using such materials:

• lace sewn to the shell;
• ribbons and bows tied on horns or around the neck;
• artificial flowers (single or whole bouquets);
• homemade flowers of fabric;
• dried lavender, sewn to the shell;
• various beads;
• different decorative elements (for example, ladybugs, hearts, keys, and so on).

Do not forget to decorate the place of the junction of the "house" and the body with the help of beautiful lace, satin ribbons, twine or other auxiliary materials.

Sewing of soft toys is a very exciting occupation. There are books on Tilda skill, which recently appeared in translated into Russian. Make a toy "Tilda" independently easy. For example, snail will be under the power even novice needlewomen.

Tilda Snail: Step-by-Step Description Toy Toy

On how to sew snail will be said below.

For Tilde style, natural textile material is usually taken: flax, hazard, knitwear. Our snail will sew a flax of bodily and blue. More will need lace, acrylic paints, sintegone for packing.

Pattern translate on paper and cut. The number of each part is indicated by numbers in the photo. Details of circulating on fabric: sink on a blue fabric, the body to make beige.

Fold the material in two layers and pave the machine seam along the contour of the pattern.

Cut parts of the snail as shown in the picture.

Remove through non-accidental holes left specifically for this purpose. Smooth out the details of the iron.

Tightly fill the snail parts with packing. Convenient to make it with a wand.

Put advantageous seams.

Pull the sink to the body with pins, flash stitches.

At this stage, the snail looks like this.

Place connecting sink with body to close lace.

Snail to attach glue to the plank.

Now draw eyes, give blush cheeks and tie a bow.

The handicraft can be added, for example, with pads, sewing them to the sink, the needle snail is obtained. Even the toys are decorated with colored tissue filmets, buttons of different shapes and sizes, etc.

What a tilde snail pattern looks like can be found on the video below.

Pillows toys

The snail pillow is sewn using any patterns according to the technology described above. Distinctive features are as follows:

1. Details of patterns in full size are printed on a large format sheets.
2. On the bottom surface, the allowances are provided to insert zipper.
3. The pillow can be fill with sintepsum, sawdust and other fillers or use as pillowcase, for example, for a sofa pillow, and the volume to make only horns and nose.

Example of patterns:

We sew "Baranki"

Now we will analyze how the Baranka snail is.

We will do such a snail.

Prepare:

• Fabric for the body of the Snail is a monophonic beige or brown and for the "house" color.
• Filler.
• Digger.
• Sewing materials.
• Glue.
• Paint for fabric.

Download: Print the pattern of the body. For shells, draw a strip 40 on paper? 4 cm.

Body translate to fabric, strain and cut. In the figure, the arms are indicated place for notches.

Fill the body, flash the base through the edge.

Having carved the sink, leaving the allowance of 5 mm, and fill, only loosely so that it was convenient to be wrapped in a spiral.

Wrap in a circle, starting from the end through which the sink trunk was filled. Each curl strengthen stitches.

Now join the body of the snail to the "house". Then make your nose. Detail to sew through the edge and tighten. In the resulting pouch, the filler is hurried.

Nose pinch to the muzzle, then sew. Draw eyes and mouth.

Roth can be separated by red threads or circle paint. Make hair out of fluff or wool.

Install the snail on the board, attaching it with glue. You can easily make a cap, put on the scarf (in the picture it is knitted by knitting knitting). At the shell to attach a gift box.

This looks like a snail from felt, patterns for which you can use those that we led above.

The dolls of the Norwegian artist year from year are becoming more and more popular: simplicity of work, simplicity of style, the charm of the rag doll, the laconicity and smoothness of silhouettes, careless colors - all this contributed to the growth of love for Tildam. They can be made both in the form of a man and a representative of the living world - a cat, a hare, or, for example, snails. How is the sewing of such a toy, and how to decorate it?

Pattern of Tilde-snail and master class on tailoring

To begin with, choose a cloth based on the toy. Casters recommend paying attention to natural materials without pronounced shine: Flax, cotton fit well. It looks good and thin sitherium, batter. The color scheme is selected depending on the stylistics of the product. If you want a toy in natural colors, then take the body or coffee color for the base and gentle blue, pale green or dust pink - for the sink.

• The pattern of tilde-snail in a natural value is 6 * 8 cm for sink, and 5 * 10 for the body itself. If you wish, saving these proportions, you can increase the parameters. Do not forget that the material is 2 times more, because Each item is stitched from 2 identical parts, because Tilda is the product volume.

The creation process itself is very simple and does not even require step-by-step photos. All that is needed is to have a printed pattern, fabric, threads in tone, syntheps or tissue trimming, as well as several English pins.

1. Cut the items (each to 1 pcs.), Translate them to the cloth from the wrong side. Having retreated 1 cm contour, cut the items - each should be exactly 2. To get completely the same, fold the cloth to each other, pinched the pins, and cut both layers.
2. Now it is necessary to fit the details in pairs, leaving a hole in 4-5 cm: It is convenient to do this on the sink at the base, which will be felt, on the Taurus - in the center of the back, which closes. Through these holes, each detail must be turned on the front side.
3. Will the body and sink, then connect them, secure the zone of the encounter with the pins and sew. Try to do it carefully, but remember that this site will still be hidden decor.

On this tailoring is completed, and remains the last stage, which requires fancy and absolutely any existing decorative elements: from acrylic paints to beads and stones.

The most interesting stage in any needlework, probably, it is the decoration of the finished product. It is here that the unique things that came out, seemingly from under the same patterns. Tilda is definitely no exception. After reviewing the photo of Tilda Snails, you can make sure that there are completely different models based on 2 parts. How to use such a toy for finishing?

• Lace. It can be both a full-fledged canvas and thin braid. With it, it is very easy to hide the seam between the sink and the body of the snail: it is this zone that is finally separated, because it never gets sufficient enough to stay without "screen". Lace is either sticks, or it is touched by threads in tone, very small and rare stitches.

• Knitted elements. Most often they are crocheted, thereby become similar to lace. There are enough several small details - a flower seated on the head of the snail or along the spiral of the shells, leaves, also beaten over the edge of the sink.
• Fabric applications. Also a fairly popular version of the decoration, and both small elements and larger, for example, by the butterfly, or a lush rose on her head.
• Beads and beads. Most often they make the sink, creating patterns on it or completely covering it with a bead colored canvas. Also small beads can be used as an eye and a smile line, or add them as the cores of colors.