Plastic bottles are ubiquitous. As a rule, empty bottles are immediately scrapped. However, if you have imagination, free time and desire, you can create stylish and unusual crafts based on them. Moreover, it is approaching New Year and Christmas tree decorations are quite expensive. So why not make them yourself using used plastic bottles, materials and tools available? In this article you will find how you can make DIY Christmas crafts for 2018 from plastic bottles, useful tips and recommendations.

Delicate bells

Bells are one of the most popular symbols of the New Year and Christmas. It is believed that they bring happiness and good luck to the house. Therefore, they must be present in the festive decor. Such jewelry can be purchased at the store, or you can make a bell from a plastic bottle. To create a bell, you will need simple materials and tools that can be found in every home. You can also use various materials for decoration, such as rhinestones, beads, ribbons, nail polish or glitter. The decor can be bright or delicate.

Materials and tools:

• Plastic bottles of various sizes.
• Scissors.
• Paints and brushes.
• Several types of nail polishes.
• Stationery knife.
• Candle.
• Awl or thick needle.
• Various decorative elements.
• Glue gun.

Most often, bells are made in pairs. Therefore, you will need at least two plastic bottles of the same size. The neck should be cut off from the plastic bottles, after which you can proceed to coloring them. The height of the bell can be absolutely any, and depends on the size of the bottle, as well as on the distance at which the base is cut. Then you should jinx the cut line. To do this, the easiest way is to hold the bell with its lower part over the candle flame. This should be done carefully, so as to only slightly warm the bottle. Otherwise, it may deform.

It is recommended to give preference bright colors and large enough ornaments. It is not necessary to use paints for this. To make the bells bright and the lines thin and neat, you can use nail polishes instead of paint.

If you plan to decorate the bells with ribbons, you should make small holes in them. For this, it is best to use an awl or a thick needle. In order for the tool to better fit into the plastic, and also to leave a neat hole, the awl should first be heated over the candle. An additional hole should be made on top of the bells to attach a ribbon or string to the bell, for which it will be attached to the Christmas tree.

You can decorate such bells in any way. Openwork braid, bows, ribbons, sequins, rhinestones, beads and other decorative elements will look great. The use of only braid and bows in combination with the painting of a bell in light currents will make such a craft incredibly delicate and beautiful. For those who love bright Christmas tree decorations, you can use tinsel, a large amount of sequins and shiny sequins for decoration.

Christmas ball from a bottle - video

Snowflakes

The snowflake is a symbol of the New Year and is traditionally used to decorate the house and the Christmas tree. A delicate snowflake for decorating a Christmas tree is an original New Year's craft from plastic bottles. More often than not, plastic bottles are just thrown away just by application. However, if you arm yourself with simple tools and imagination, you can independently make unusual snowflakes that you can decorate a Christmas tree, curtains, walls and other elements. festive decor... Snowflakes are made from the bottom of a plastic bottle, so for a large number blanks will have to collect bottles in advance.

Materials and tools:

• Plastic bottles of various sizes, transparent, blue or light blue.
• Stationery knife and scissors.
• Paints.
• Thin tape.
• Nail polish or oil paints.
• Brush.
• Awl.
• Decorative items such as sequins, beads, beads, sequins and others.

First you need to make blanks. Of the entire plastic bottle, only the bottom is used to make a snowflake. Cutting off the bottle is most convenient with a clerical knife, and then trim the edges with scissors. Using an awl, you need to make a hole in the workpiece, which will be used to attach the tape. This will allow you to hang the finished snowflake on the tree.

You can use white or blue paint to pattern snowflakes from a plastic bottle. The choice of paint color depends on the color of the base. Any paint color will work for a transparent bottle, and for light blue or blue it is best to use white paint... To make the drawing brighter and the lines thinner, it is recommended to use nail polish instead of paint. Additionally, you can cover the whitewash with glitter varnish. This will give it a smooth, shiny look.

To hang a toy on a Christmas tree, you need to attach a ribbon to the craft. If you hang several snowflakes on a long ribbon, you can make on the basis of such snowflakes original garland to decorate a window, walls or a Christmas tree.

Volumetric Christmas tree toys

Many people prefer to use available materials, such as plastic bottles, to create stylish and unusual crafts for decorating the Christmas tree. This allows you to make exquisite things, save money, and also give new life unnecessary things. One of the most popular materials for creating Christmas tree decorations is plastic bottles.

A Christmas toy from a plastic bottle can be different material depending on the size of the bottle itself. Therefore, plastic bottles can be used to make toys for decorating a Christmas tree at home or outdoors. It is quite simple to make such toys, so even small children can be involved in the case.

Materials and tools:

• Plastic bottles of the same size and color.
• Satin ribbons of small width.
• Stationery knife, scissors.
• Double-sided tape.
• Enamel paints or nail polish.
• Brushes for paints of different thicknesses.
• Decorative items to taste.

First you need to make blanks for toys. For making toys, only bottoms of bottles should be used, so they should be separated from the bottles first. The most convenient way to do this is with a clerical knife. One toy requires two bottoms.

On the inside of each half of the toy, you should draw snowflakes, flowers or other ornament. You can use paints of any color. Finished workpieces should be connected in pairs and attached with double-sided tape.

An original idea is to fill toys with tinsel, confetti, candy or other decorative items.

With the help of an awl, a hole should be made into which it is necessary to make satin ribbon or twine. This will allow you to hang the toy on the tree.

How to make a Christmas tree from a bottle - video

Christmas bells

It's hard to imagine christmas tree without round balls. They can also be made from plastic bottles. For this, bottles are used that have a round part near the neck.

Materials and tools:

• Round necked plastic bottles.
• Gouache of various colors.
• Paint brushes.
• Tinsel.
• Sequins.
• Double sided tape.
• Sequins, sequins and other decorative elements.

First, you need to make the bases for the toys. To do this, you need to cut off the plastic bottles so that you get semicircular toys. The resulting toys should be painted with gouache, oil paints or nail polish, especially if the bottle is white or transparent.

Additionally, decorate the toy with tinsel, which is best attached with double-sided tape. Also, the balls can be decorated with glitter, sequins, beads and other decorative elements. You can hang the balls on tape, twine or thread.

Do-it-yourself original crafts from plastic bottles for the New Year will allow you to decorate the Christmas tree in a stylish and unusual way, as well as get the most out of making unusual crafts.

Santa Claus from a bottle - video

Content

And we are here, as always with our interesting and original ideas New Year's crafts. This time we will create crafts from plastic bottles. Firstly, do not forget that plastic takes more than 100 years to decompose, so we must use it to the maximum in order to do less harm to nature.

Secondly, these crafts will not require too much cash injections from you. Thirdly, a lot of interesting gizmos can be made from this improvised material. In our article you will find figurines, a garland, a piggy bank, Christmas tree decorations and many other crafts from plastic bottles.

Christmas figures from plastic bottles

These bottle crafts are very easy to create from bottles. Here is a set of required items:

• plastic containers;
• scissors and a stationery knife;
• paints, brushes;
• textile;
• Knitting;
• felt;
• glue gun.

For example, you can make adorable penguins. To do this, you need to cut the workpiece in half, and cut off the bottom for the cap. Next, they need to be painted like penguins, glue the parts with a glue gun and decorate the figures with textiles.

A little tip - instead of a glue gun, you can use scotch tape, which you just paint over later.

Use acrylic paints, they adhere better to plastic.

From this simple and affordable material, you can also make bright and beautiful apples, which can be placed under the tree or to decorate the kitchen with them. By the way, the decor is suitable not only for the New Year, but also for other holidays.

For a child, you can make a toy - a horse on a stick. If you improvise, you can also create a dog, because this is a symbol of the upcoming 2018. And the color, by the way, is yellow! So use a lot of yellow when creating your wonderful crafts.

Christmas tree decorations from plastic bottles

If a lot of the material we need has gathered in the house, and you already do not know where to put it, then our advice to you is for creativity! Let this container be creative! You can make wonderful snowflakes from the bases. They only need to be slightly colored and attached with a string so that they can be hung. Use a thin brush to paint the pattern. From such blanks, you can create a whole garland or wreath on the door.

Crafts for the New Year from bottles are both original and not expensive.

But these bells are obtained from the tops:

A whole ball can be crafted from bottle bases. Details can be painted, or you can use it in its original form:

Crafts from plastic bottles for the New Year is an opportunity to give a second chance to old things, an opportunity to join the culture of recycling things, sorting garbage. Thus, we consciously approach the use of resources, and besides, you can always call yourself a trash art artist, and this, by the way, is a very fashionable movement nowadays. In general, such handicraft is good on all fronts!

And the following Christmas balls are made of stripes, which are decorated with various beads, paints, ribbons and other decor:

Snow balls

Another cool idea is to use plastic bottles to create Christmas snowballs. What we need:

• smooth plastic bottles;
• acrylic paints, brushes;
• sequins;
• decorative figurines;
• glue;
• foam or artificial snow;
• sequins, beads.

To begin with, you need to cut off the top and bottom of the bottle so that one tube remains. A circle needs to be cut out of polystyrene along the diameter of the pipe, we will attach our decorative parts to it.

Then, having coated the sides of the foam with glue, it must be glued to the main part of the composition, placing it inside the decoration.

The top and bottom of the pipe can be decorated with cut-off parts of the bottle, glued with a glue gun and decorated with artificial snow and ribbons. Crafts from plastic bottles are ready! You can also sprinkle sequins, sequins and beads inside.

Conversely, you can use only the top and bottom to create a kind of New Year's snow globe.

Cones from plastic bottles

Another decor option when plastic is used to create a cone. It is better to use brown blanks immediately.

From your material you need to cut something like daisies and string them on a string. Make blanks of different sizes so that you end up with a bump. Fir branches can be cut from a green bottle.

Plastic bottle wreath

For this we need the bottoms of plastic bottles, wire, bow and other decorations.

Details can be painted gold to add pomp and completeness to the craft, as well as disguise the material from which the wreath is made.

Candlestick for New Year

One of the New Year's attributes is a candle. Well, you and I can make very good candlesticks.

The next candlestick is made of two components, decorated with coffee beans, but, most importantly, this is a beautiful decorative candle.

By the way, do not forget that you can use not only bottles of mineral water or sweet water, but also yoghurts, kefir and other products.

Souvenirs for the New Year

Something comic and funny can be prepared for guests or kids. For example, make a piggy bank out of a plastic bottle. And what? Very original! It will turn out to make a piggy bank-dog - it will be even better!

Use acrylic or spray paints, felt details, fabric, beads and various other decor for decoration. But children will definitely be delighted with such funny turtles. For the base, use thin kitchen sponges or foamiran. We have already described how to work with this material in our articles.

And how do you like a whole flower bed of tulips in the middle of winter? Such a composition can be used to decorate a summer cottage or a courtyard of a private house. The first time guests will not understand for sure that these beautiful flowers are made from ordinary plastic bottles. As they say, crafts from plastic bottles for the New Year are a manifestation of imagination and ingenuity.

And a few more options for non-winter colors in the performance of the simplest and most affordable material at hand:

Plastic bottle cup

If you want to stand out from the crowd, have a special attribute, or you need to have a cup in accordance with the costume, then it can very easily be made from the material we know. By the way, read our articles where we tell you how to make crafts for the New Year from a bottle of champagne - this can also come in handy. So, the cup:

Luxurious, right? And, at first glance, you can't tell at all what it is made of, and at the second - too!

The design of a future wine goblet or as a reward might look something like this:

Or like this:

We love to tell you about different unusual crafts, about the materials from which you can make amazing things and which are in almost every home. All this in order for you to find a moment for creativity, for relaxation, for your hobby. Slow down the time around you, let, as they say, the whole world wait while you create beautiful things. Well, in conclusion - crafts for the New Year from bottles of video master class:

See how you can create a fun garland that can be hung in the kitchen or in the children's room, or wherever you want, at your discretion.

Post Views: 1 265

Most recently, I was visiting my friend. Elena has been doing needlework for a very long time, and it is from her that I often borrow amazing ideas for creativity. Everything that the girl comes up with, she tries to immediately implement.

So this Saturday, she showed me several of her findings, which can be a wonderful help in preparing for the New Year and Christmas. After all, it is not at all necessary to spend a lot of money on purchased decor, when it is quite possible to make it with your own hands from scrap materials.

Christmas crafts from plastic bottles

Editorial staff "So simple!" prepared for you an unusual master class about how to make a christmas bell from a cola bottle. Easier than ever and at no extra cost!

You need

• PVA glue
• linen thread
• packing tape
• plastic bottle

Manufacturing

I also suggest that you familiarize yourself with a few more ideas New Year's decor that can be made from unnecessary plastic bottles.

We also have a wonderful master class for you on how to create a candy bar using plastic bottles, a colored packaging garland and LED flashlights. On the eve of the New Year, do not be too lazy to make such a decoration. It will come in handy more than once, tested on our own experience!

As you can see, even ordinary plastic bottles can be a great material for creativity. Moreover, the New Year is approaching, which means that you need to create something new and get rid of the old. And these ideas will just help you get rid of the old, while creating an original and beautiful festive decor.

1. Christmas tree made of plastic bottles

Prepare such a Christmas tree green plastic bottle, Scotch, scissors(such that they can easily cut a plastic bottle, a Whatman tube... The only thing that can be added to such a tree is to decorate it with beads by gluing them to the tree with glue. You can hang a ribbon of rain. You can make such a craft together with your children. Next, we do everything as in the photo:

To make decorative New Year's craft: tree made of plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally a Whatman paper (A4);
4. Scissors;

So, we cut the bottle as shown in the photo below. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.

Cut each plastic bottle lengthwise into 3 equal parts and only then adjust their dimensions so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be "dismantled". The neck of one of the bottles will serve as a stand for our future New Year's craft

The next step is to fold the Whatman paper into a tube. We insert into the bottleneck and secure with tape in a circle.

You can decorate the top of our Christmas tree with a homemade Christmas tree toy or make the completion of the Christmas tree the way we did.

If you want to make a fluffier Christmas tree from PET bottles, such as in the photo below, when making a Christmas tree, the needles need to be cut as thin as possible (more often).

2. For Christmas trees from plastic bottles you will need green bottles of various sizes and a wooden stick with a diameter slightly smaller than the neck. The length of the stick will determine the height of the tree and the number of bottles.

Perhaps it's done)

4. Another very interesting option

For manufacturing we need:

• scissors
• green bottle
• cork
• round cottage cheese dessert cup
• candle
• glue.

Also find foam rubber. We cut off a piece of kitchen scouring sponge.

First, cut the green bottle into squares or circles of different sizes. For the lower part of the Christmas tree, the width of the square should be at least 6-7 cm, for the middle - about 5 cm, for the crown, 2-3 cm is enough.

Now with scissors we thickly break through the edges of the stars. You can call your family for help. In fact, the work is painstaking and requires a lot of patience. The time-consuming edging takes about 30 minutes. To make the spruce legs look more natural, we bring the plastic to the flame of the candle. The tips of our coniferous branches will gracefully curl downward. Here is the finished result.

The turn has come to apply glue and foam rubber. Cut the sponge into small pieces (1x1 cm).

Now we grease the largest spruce paw with glue, apply a cube on top. Drip the glue again and cover it with green plastic.

We continue to work until we run out of details. Do not forget that we are "building a pyramid", and therefore, with each subsequent gluing, we are guided by the size of the plastic sprocket.

It remains to arrange the trunk of a coniferous tree. Of course, a cork stopper will play its role. However, we will place the tree in a small yellow bucket to make it resistant to tipping over. We will cut it out of a round glass.

Lubricate the bottom of the bucket with glue, place the cork barrel in the center. Set aside the part for 2-3 minutes, let it dry completely.

We connect the crown with the trunk. The result is a slender emerald tree made of plastic bottles... A real forest beauty.

Outcome

5. By the way, the Christmas tree looks quite creative with larger "branches"
Cut the bottle into 3 parts, only making cuts in a circle towards the center, straight.

In the center, a puncture is made with an awl and the needles are bent up and down in order. In the lid from the cream or mineral water, a puncture is made into which a skewer of the required length is inserted.

The parts are strung in descending order, a large bead is placed on top of the glue. The Christmas tree can be decorated with styrofoam, rain, etc.

We glue the Christmas tree to the stand from the disk.
The Christmas tree is ready

Plastic bottles are no longer garbage, but a material for making various crafts. Disposable containers are used to make vases, dishes, designer jewelry and much more. So why not make a New Year's toy from a plastic bottle? Moreover, there are a lot of ideas in this direction.

Some skeptics argue: “Why make Christmas tree decorations out of garbage? Indeed, in modern stores you can buy very beautiful products! " There is, of course, some truth in this. But Christmas toys from plastic bottles have their own advantages:

Lamp, chandelier or light garland

As you can see in the picture, the bottle has been cut in two. With scissors, you form flowers and you end up putting the little garland bulbs in the ring of the bottle. We love this plastic spoon candle idea! Well, this is not a bottle, but plastic spoons! We decided to include this idea in our selection because it is really very interesting. The principle of its implementation is very simple - you need plastic spoons, rope and glue. Watch the video to see all the stages of its implementation.

To make the candlestick in the picture below, you will need a large plastic bottle. Or a squirrel feeder is a very good idea and ecological restoration. A plastic bottle is perfect for this! Just make a hole, fill it with seeds, and hang it on your patio, balcony or in your garden.

Also, using waste materials, you give them a second life and do not throw them away, indirectly caring for the environment. A pleasant sensation New Year's fairy tale appears exactly at the time of making the craft. Try it once, and next year you will only decorate your Christmas tree with toys of your own production. Such activities are very useful for children. During the creative process, the child experiences positive emotions. Handwork also has a beneficial effect on the cognitive sphere: thinking, memory, imagination, and fine motor skills of the hands develop.

Bird and bird feeder for squirrels

Little happy bird of her nursery. Refurbished and original candlesticks? It is very easy to implement and free you to decorate them the way you want! The plastic bottle can be easily converted into original and practical storage accessories.

Teaching children to respect and love nature

The plastic bottle turns into precious stone? You can create any kind of plastic jewelry. Teaching children to respect the environment is essential. Even if “green” has been in vogue for several years, this trend is still not widespread. Many consider recycling unnecessary and usually do not repair old items rather than throw them away. If you want to teach your kids how to recycle and recuperate, take a weekend off to creative activities. Below you will find two ideas for toys made from plastic.

Christmas balls

To make a Christmas ball you will need:

Instructions

From the middle of the bottle, you need to cut out several rings (3-4 pcs.). The rings should be about 1 cm thick.

Plastic robot, source: Bottle robot. Every year, over Christmas, thousands are sold in the country plastic items such as gold and silver threads, aerosol cans and artificial snow, light wires, colored paper, adhesive paper and every year and almost 50% of these products end up in waste. These are the numbers that make us think, but what we can do: Obviously, the solution is not to give up decorating your homes as many of you are used to doing, but simply to use recyclable materials by doing a lot. cases.

Now thread one ring into the other and connect with a paper clip. It is desirable that the rings are arranged symmetrically. The blank for the ball is ready.

Let's start decorating. To do this, you need to coat the rings with glue and sprinkle them, for example, with beads, sparkles, foil of different colors, etc. Tie a silver thread or ribbon to the ball in the form of a loop. A Christmas toy from a plastic bottle is ready!

Let's get excited with little creative recyclers to create decorations to be displayed at home. Ideas are so many and fun, maybe even engaging young children in a healthy and educational game. If you haven't already, try setting aside newspapers, bottles, and caps, as they will certainly be useful for preparing greeting cards.

Simple toys from plastic bottles

For jewelry, there is nothing to look into drawers and find something to reuse: cardboard items, old T-shirts, and even plastic bottle caps are great for crafting. original jewelry to cheer up the house, wood and crib.

Cones

Pine cone toys have always been hung on the Christmas tree. Previously, they were made of glass, today you can buy plastic jewelry... We will make cones from a plastic bottle. If a child is involved in making the craft, be careful, as you will need to work with fire.

It is necessary to prepare the following tools and materials:

Here are some tips on how to decorate your home for Christmas. With seeds, however, you can give birth to Christmas theme pictures and posters. You just need to have ecological glue, eco-colored shades, and the game is over. A highly decorative product, totally non-toxic and eco-friendly, this is Happy Maza, a game created by a well-known company producing ecological games consisting of a powdered corn derivative. a natural one that connects bricks to bricks and through which you can create a crazy father, comet stars, Christmas trees, snowmen and many other characters or themed objects.

Instructions

Cut 12 squares of different sizes from a brown bottle (3 small squares should be about ¼ of a large workpiece).

Now the corners of the squares need to be rounded off by making a chamomile from each blank.

How to decorate your home for Christmas without harming the environment: felting

How to decorate your home for Christmas without harming the environment: felt trees. If you have colored "leftovers" in your home, you might think you will use them to decorate a tree, table, or gifts. Hearts and stars are ideal for home breeding as well as quick cleaning. If, however, you try to do something a little more original, you can play classic Christmas stars, draw silhouettes of flowers on paper sheets, and then cut the felt.

In the next step, we will work with fire. Light a candle and bring the edges of the workpiece to the fire: the petals will go down. Be careful not to melt the plastic. As a result, you should end up with a kind of bowl or plate.

Poke a hole in the middle of each piece. To do this, you need to use an awl.

Bend copper wire and make a loop (leave room for " pine twig"And beads). Now we need to string our workpieces onto the wire: we start with the largest and end with the smallest. Hang a bead between the pieces.

How to decorate your home for Christmas without damaging the environment: deer. It is also useful for creating custom placeholders or decorative balls that you can hang from a tree. In this case, it is enough to cover a small piece of paper or a newsprint to give it round shape and insert colored fabric combs. The most experienced can even create crowns hanging from the door.

How to decorate your home for Christmas without damaging the environment: The crown is hanging by the door. Alternatively, you can create curious shapes by covering small unused objects. You can always make the original with felt. And if you have some pillow cushions, you can sew a beautiful red and green pillow and then decorate it with old buttons or other "recovery minions" that are commonly found in our homes.

We start manufacturing spruce branches... We will make it from a green bottle. Cut out a propeller-like shape from the middle and make frequent cuts (needles) around the edges. Hold the piece over the fire, forming a twig shape.

In the very center of our pine branch, pierce a hole and put it directly on the cone. Hang up a few more beads. You can decorate a festive tree with a New Year's toy from a plastic bottle.

How to decorate your home for Christmas without harming the environment: felt gloves. You can also try to create beautiful and unusual felt closures. How to decorate your home for Christmas without damaging the environment: it feels. Recycling is always good idea, especially items designed for an awkward box. Glued between them on the rainbow side, you can make sparkling Christmas crowns hang on the door, perhaps enriching them with a red ribbon or decorative bow.

How to decorate your home for Christmas without harming the environment: Decorating paper and recycled plastics. With old notes, you can create stars, balls, or Christmas tablecloths that must be plasticized for rendering and water repellent.

A wonderful winter holiday is approaching - New Year 2018. It's time to decorate your house for his arrival so that Santa Claus does not pass by on his magic sleigh and leaves good gifts under our tree. It is very interesting to decorate the Christmas tree and rooms with handmade toys for the holiday. The very process of their manufacture is fascinating, however, like any creativity. Such crafts can be made from the simplest materials, for example, from plastic bottles. From ordinary plastic bottles, you can make a lot of interesting and beautiful things that will successfully replace store counterparts. Our today's story is dedicated to the 7 best and original crafts from plastic bottles for the New Year 2018, which will be held under the sign of the Yellow Dog. Let's take a closer look at them in our article.

With old notes, you can create stars or tablecloths for your Christmas table. How many times have you thrown discarded colored cardboard, paper sheets and plastic bottles, thinking that they could no longer return to us? With cardboard, you can make personalized postcards and Greeting Cards or wrap your gifts in an eco-friendly way or make fancy illuminated decorations like a Scandinavian-style mini crib.

Christmas cones from plastic bottles

You can make unusual lighting decorations, such as a Scandinavian-style mini crib. It's also perfect for bookmarks and colored locks. Buttons can also be used to create decorative flowers of great effect: get some thick wooden sticks, fix the flask on the hard disk and glue the colored buttons one after the other different types and sizes, starting with the one with the largest diameter, or to make greeting cards.

Christmas tree

An unusual Christmas tree can be made from simple plastic bottles. It is important to collect necessary materials for this craft and step by step observe the master class.

This will require:

• Plastic bottles;
• Scotch;
• Sandpaper (cardboard);
• Scissors.

Progress:

1. The bottom and the neck should be removed from the bottle, and then you get a straight pipe. Then you should prepare blanks from the branches. They must be of different sizes to make the tree cone-shaped.
2. Then the plastic bottles need to be cut lengthwise into 3 parts so that the subsequent tiers are less than the previous ones. Needles need to be made on each workpiece, and for this they are cut into thin strips, but not completely. In order for the Christmas tree to stand steadily, it is advisable to use the bottom of one of the bottles as a stand.
3. A sheet of cardboard must be rolled into a tube and installed in the neck of the bottle. You can fix it with tape. Now each tier of branches needs to be fixed on the tree. You can put a toy on the top or come up with something else. To make the Christmas tree fluffy, the needles should be cut thinner. Usually, blue or transparent bottles are used for this. That's all, our craft is ready!

Christmas balls

You can decorate your Christmas tree with handmade toys. In work, it is important to follow all the steps in stages, and then you will get wonderful products.

Christmas balls from plastic bottles

How to decorate your home for Christmas without harming the environment: recycled materials. Stars, snowflakes, trees, angels, sticks, bells and hearts can always be created from recycled paper or plastic bottle bottles. Draw shapes on the sheet, cut out and paint them.

How to decorate your home for Christmas without harming the environment: edible decorations

Paper and cardboard stars and balls made from recycled balls. Here is a fun and colorful advent calendar. Not just felt paper, plastic and buttons. Why not think of letter shaped biscuits or decorate with icing, better homemade so you can hang on a tree and also give kids and dear friends perhaps in delicious cans.

This will require:

• Plastic bottle;
• Glue;
• Rain;
• Any shiny jewelry.

Progress:

1. The paper needs to be wrapped around the bottle to help mark the blanks on it. It is necessary to cut 4 rings 1 cm wide. Then the rings must be fastened together according to the principle "crosswise" and fixed with glue. The result should be a ball of plastic strips. You need to choose beautiful threads or rain so that the toy can be used for the Christmas tree.
2. To decorate the resulting blanks, it is better to use foil, beads, beads, etc. A small ball can be placed inside such a ball. In this craft, you can fantasize as much as you like. This will be a very interesting activity for children.

Snowflakes from plastic bottles

Here are some corn maize to hang from a tree. Cookies to give to children and dear friends, perhaps in tasty cans. The risk here is that your jewelry won't be up until December 25th, but it can be a good way to spend a pleasant day with your kids and friends. Who could hold onto a sweet garland of colorful cookies or candy?

This will require

Colorful candy garland to hang on your door! Cookies for sight to pass in a red ribbon and hang on the fireplace and on the walls. From the classic cookie box to cookies of all shapes, with a small hole to hang them on cinnamon sticks. It will be a greedy and creative Christmas for everyone to enjoy!

To expand the range of crafts from plastic bottles for the New Year 2018, you can also make snowflakes from the bottoms of bottles as a Christmas tree decoration. This process will be within the power of beginners in this creative business.

To work you will need:

• Scissors;
• Acrylic paints of white, blue, golden, silver color - to choose from;
• Plastic bottles, preferably blue;
• Paint brush;
• Wire;
• Pliers.

Progress:

Decorations to eat and hang from tree branches. Also on the table there may be curious decorations in the form of a seedling with cheese and vegetables: unusual way decorate your Christmas dinner. Strawberry or Santa Claus hat? Why not imagine a tree-like dessert?

This is the right opportunity to show that you are even more sensitive to nature, which we ourselves are endangering. If you want to make your next Christmas even more sustainable, read these articles as well. How to replace a plastic bottle with a colored pet or white snowman? Just colored paper, paint, glue and enough. Plastic empty bottle like it was such an inconspicuous thing and so much fun to play!

1. We take plastic bottles and stationery knife or with scissors cut the bottom as low as possible to the base, leaving only the corrugated part.
2. After the bottoms are ready, we start painting our future snowflakes. Depending on the desired pattern, we select the thickness of the brush, and then proceed to the art. As pictures, you can use various ornaments that come to mind. This also applies to the choice of the color of paints with which you will decorate your New Year's product.
3. When your snowflake has turned into a beautifully painted masterpiece, give it time to dry, and you use wire and pliers to make a small eyelet for the thread. Attach it to the snowflake and pull the thread through this ring.

Well, ours is ready christmas toy for christmas tree decoration that you now have the right to be proud of. A self-made snowflake can serve as a worthy decoration not only for your home, but also for a kindergarten, if you have Small child and also act as an exhibit at an exhibition at the school of New Year's products.

Sitting at home with Jas, we organize our own classes. And now there are regular plastic bottles for drinks and yoghurt. Today, 2 ideas on how to use old bottles to create really interesting things. How to use a regular plastic bottle when playing with your child. Today we are going to show you how to make snowmen and plastic dog bottles.

To make a snowman, we need. In 2 plastic bottles, we only had white color, which made it easier to work with hot glue and such ordinary school scissors, a black cardboard box and eyelets made of any material or paper paint. The bottle, if you don't have a white bottle, can be dyed or covered with thin white paper, or possibly smooth paper. When the bottle is dry, we draw a test tube and make a hat of any color, black cardboard or foam, cut out circles and insert eyes and buttons.

Penguins from plastic bottles

Penguins from plastic bottles, which should be placed in the rooms and under the tree as a decor, can become an original New Year's decoration of your home for the New Year 2018. Such a craft will delight all your family and guests, especially children. Without spending a lot of time, you will create a real masterpiece of art with your own hands, which will cause a lot of positive emotions and sincere smiles from your household.

To work you will need:

• Plastic bottles (one toy takes two bottles);
• Scissors;
• Acrylic paints - white, black, red and others;
• Brushes;
• Small colored scraps for a scarf;
• Buboes or bows for hats;
• Glue.

Progress:

1. We take the bottle and cut off the top part almost completely or half to make the body of the penguin. The head is made from another bottle and also from the bottom, but the blank should be slightly smaller.
2. We connect both blanks by inserting the upper part, which is smaller, into the lower, which is larger.
3. After you have built the body of the penguin, start painting it. Take acrylic paints and apply gently to the plastic product, imitating the color of the penguin, as shown in the photo. Use more bright colors, because the brighter your New Year's penguin turns out, the warmer and more cheerful the smiles of your family will be.
4. When your penguin looks realistic, you can tie a small scarf around his neck, and attach a bubo or a bow to the hat with glue.

Here you have such a cartoon miracle!

Video tutorial on making penguins from plastic bottles

Golden bells

Golden bells will look original on the Christmas tree. This work is done very quickly and is suitable for kindergarten.

This will require:

• Plastic bottles;
• Acrylic paint, if desired, fabrics, ribbons and accessories can be used instead of acrylic paint.

Progress:

1. For work, you should take bottles of 0.5 liters., But more is possible if the tree is very large. The bottom of the bottle should be cut off. To get the bell petals, you need to cut the edge of the bottle in a zigzag fashion. Since the resulting edges will be sharp, care must be taken.
2. The petals of our craft need to be made pointed, and you can shape them with a knife. To make the holes for the string, you need to heat the knitting needle and make the holes. You can do this work with scissors, only very carefully. At the end of the work, the bells should be painted, and they will dry within an hour. To give the products a New Year's look, they need to be decorated with tinsel, garlands or sparkles. The instruction is simple, and you can perform the work in your own sequence.

Candlesticks from a plastic bottle

This will require:

• Plastic bottles;
• Scissors;
• Glue gun;
• Universal adhesive.

Progress:

1. You can make a wonderful candlestick for the holiday with your own hands. You can use bottles different colors... The containers must be cut in half. The edges of the part that remained with the bottom should be cut into strips, not reaching 4 cm. The strips can be of different widths. The resulting container will be a candle holder.
2. The plastic strips should be melted over the candle. Then, using a glue gun, you need to attach the candle in the foil. The space around the candle can be decorated with beads or pebbles. So the candlestick will be lightweight, our craft is ready.

Video master class on making candlesticks

Cone

You can make original cones with your own hands, this craft from a plastic bottle will perfectly decorate your Christmas tree and home for the New Year 2018.

This will require:

• Plastic bottles;
• Scissors;

Progress:

1. You need to create squares from a plastic bottle, after which their corners should be rounded. The result is products like chamomile. After that, you need to process the edges of the petals with a candle so that they go down.
2. All details must be strung on a string in descending order. A bead must be inserted between them. Then you need to make a spruce twig and fix it on the cone. The product is ready to create a festive atmosphere.