Perhaps, many consider hedgehogs to be one of the cutest and funniest animals. They are the heroes of your favorite cartoons. Recall at least "Smesharikov" or cartoons based on Kozlov's fairy tales "Shake! Hello". And how wise and reasonable the hedgehogs look in Suteev's fairy tales "The Magic Wand", "The Bag of Apples", etc. Having figurines of funny prickly animals at hand, you can play with children in various games(role-playing, educational), as well as decorate a children's room, window sills, shelves with fairy-tale characters.

Making hedgehog figurines with your own hands is not at all difficult. We suggest using several simple master classes from detailed description each stage of work.

Application from seeds

To complete the application you will need:

• contour picture with a hedgehog;
• sunflower seeds;
• small pieces of plasticine;
• PVA glue;
• glue brush.

Staged execution

1. We draw or print in advance on a sheet of white (colored) paper the image of a hedgehog.

1. We cover with glue the back of the animal (the place of the thorns). We apply glue in parts so that it does not dry out during work.
2. We spread the seeds on the glue. During laying out, we try to place the seeds with a sharp end in one direction.
3. After the back is completely lined with seeds, we leave the craft to dry for several hours. In order for the seeds to stick better and not fall off, we cover the application on top with a sheet of clean paper and put it under the press (under several books or a stack of magazines).
4. While the work dries up, we sculpt the favorite delicacy of hedgehogs from multi-colored pieces of plasticine: mushrooms, apples, pears.
5. Glue figurines from plasticine on top of seeds-needles. If desired, you can color the paws and tummy of the animal.

A fun application is ready! It can be hung on the wall or given as a postcard.

Collective work "Family of hedgehogs"

On the creative pursuits in kindergarten and in the classroom elementary school you can make a collective craft with hedgehogs from plasticine and watermelon seeds.

To work, you need to prepare:

• whatman;
• paint or gouache
• dried flowers, leaves, grass;
• dry watermelon (pumpkin) seeds;
• brown cardboard;
• scissors;
• brown plasticine.

Step-by-step master class for making a hedgehog figurine

Pre-prepare the background for the collective application: draw and color a forest clearing, stick dried plants. Distribute the hedgehog cutouts to the children and invite them to apply a thin layer of plasticine on the back of the animal (the place of the thorns).

Next, insert the sharp end into the plasticine close to each other watermelon seeds. From plasticine, mold the nose, eyes and mouth of the animal, as well as berries, fungi, leaves. After the individual figures are made, use double-sided tape to stick them onto the painted paper. Let the guys choose a place in the clearing for their hedgehog.

Funny figures from plasticine (salt dough)

To play with hedgehogs, make funny figures from plasticine and sunflower seeds. You can choose the color of seeds to your taste (black, white, striped). The main condition is that the seeds are dry. You can even use packs (but no salt!).

The photo shows all necessary materials and tools (sunflower seeds, plasticine, stacks).

1. Choose the right plasticine. It could be regular set plastic material for manual child labor or wax plasticine. Select all material options for modeling individually.
2. Take a block of plasticine in your hands, use a stack to separate the necessary piece and heat it between your palms. When the plasticine becomes soft and plastic, roll the ball.
3. From the ball with your fingers, “pull out” a small part (hedgehog nose). The body can be left round or slightly flattened from below.
4. Glue a small black ball on the very tip of the spout and 2 eyes on the sides.
5. The next stage of work is the most painstaking and requires accuracy and concentration. It is necessary to start inserting seeds from the beginning of the body. Choose for yourself suitable option their location - with a sharp or thick edge inward. Continue to insert the seeds to the very end of the back, trying to stick each as close as possible in a circle to the other.

Hedgehog-snorter is ready! Such a figure can be decorated on top with plasticine apples or fungi.

You will succeed in no less interesting and funny plasticine animal if you replace sunflower seeds with pasta (spaghetti) broken into small pieces in your work. You can choose the most unexpected color for the hedgehog. From this, the craft will only become more fun and brighter!

Aroma hedgehog

Not only create fabulous atmosphere in the room, but you can also fill the room with a wonderful aroma with the help of crafts using coffee beans and plasticine.

To make an aroma hedgehog, you will need the following:

• a ball made of foam or plastic (hollow);
• scissors with sharp ends stationery knife);
• thermal gun (super glue);
• plasticine Brown color;
• black beads - 2 pieces;
• leg-split;
• cardboard (best from boxes);
• a small piece of foam;
• coffee beans (whole);
• for decoration: a dried slice of orange (grapefruit), a cinnamon stick, a few stars of cloves (or any other spices whose flavor you like).

Making crafts

1. Cut the ball in half.
2. Cut out a small cone from the foam plastic with a knife - the muzzle of the animal.
3. Lay half of the ball on the cardboard, trace around the contour and cut out the blank for the bottom of the craft.
4. Cover the top of the ball with a layer of brown plasticine.
5. Using a heat gun, glue a cardboard circle (bottom) and a foam cone (muzzle) to half of the ball.

1. Glue the tip of the twine to the end of the cone and start wrapping tightly. After the muzzle is wrapped, fix the end of the twine with glue.
2. Glue the twine spiral starting from the middle.
3. Turn the workpiece over and start inserting the coffee beans into the plasticine. Fill the entire surface of the ball with grains.
4. Glue the beads in place of the eyes and nose.
5. Put a dried citrus slice and your favorite spices on top of the grains.

By placing the aroma-hedgehog figurine in the kitchen or in the bedroom, you will feel how the room will be filled with a magical aroma!

Try it with your children to make crafts from plasticine and sunflower seeds or coffee.

Children go to the animal school, and they were asked to make a hedgehog figurine at work? It may seem funny, but not all parents know how to help their child. After all, you need to create a beautiful craft. In this article we will tell you how to mold a plasticine hedgehog in various ways.

cartoon character

It is not difficult to make a plasticine hedgehog. From pink material you need to roll a small ball and four sausages. Now two ovals should be shaped like a drop, slightly flattening one edge with your fingers. Glue the arms to the body and proceed to the manufacture of the legs. To do this, sausages need to be made a little thicker from the bottom and thinner rolled up. We slightly beat the workpieces of the legs on the table, thus, it turns out to seal the lower edge and make the legs stable. The upper part should be narrowed. Set the body on its feet.

From purple plasticine you need to make needles. They should be made in the following way. We roll up a small ball and with three fingers of the right hand, index, large and middle, attach round shape sharp edge. We make so many needles that they fill the entire back in dense rows.

It remains to give the hedgehog a thoughtful expression. A thin strip should be rolled from purple plasticine. We lay out the frame of glasses from it. It will be two circles, with two sticks. One end of the bow is attached to the frame, and the other to the needles on the back. From pink plasticine, roll two balls and make ears out of them. Just below the glasses you need to glue the nose, and fill the lenses themselves with white plasticine. It remains only to make pupils.

Hedgehog from seeds

Making such a craft is not difficult even for a preschooler. How to make a hedgehog from plasticine and seeds? The first step is to roll up a big ball. Now one side of it with three fingers must be pulled out. Do not overdo it, the hedgehog's nose should not be too thin. We put the workpiece on the table horizontally, and lightly knock on a flat surface. In this way, the toy should be made a flat base. Now you need to outline the front line with a stack or a fingernail.

We take the seeds and start from the line, stick them into the plasticine with the sharp side. This should be done not in a chaotic manner, but in layers, that is, in rows. So the needles will look neater, and the gaps will not be visible. It remains to make a hedgehog face from plasticine. From black material you need to roll three balls. Two of them will be the eyes and one will be the nose.

Hedgehog from a cone

This craft should be created on the eve of the New Year. After all, we will make a plasticine hedgehog based on a cone. Pine needles will complement the craft. Let's get started. Have to take pine cone and, so that she does not roll on the table, make her a stable base. To do this, roll out a layer of plasticine and cut out an oval from it. Glue the cone to the base. Now from plasticine you need to make a muzzle for an animal. We roll the ball and give it the shape of a cone. This blank must be glued to the place where the cone was attached to the branch. Now we complement the muzzle with eyes and a nose.

It remains only to make needles. To do this, in each branching of the cone, in those places where the seeds used to be, you need to place a small amount of plasticine. If desired, it can be replaced with drops of glue. After that, you should decorate a hedgehog from a cone, fixing pine needles in plasticine. They can be replaced with any other thorns, for example, from hawthorn.

simple hedgehog

What to do if you don’t want to bother yourself, but you need to make crafts? How to make a plasticine hedgehog in 10 minutes? First of all, you need to create a blank. And it will be a ball. According to the standard scheme for making hedgehogs, you should pull out on one side of this geometric figure cone. We knock the workpiece on the table, thereby compacting the base. And now from the manicure set you need to take a tool that visually resembles a fork with two teeth. It is very convenient to make needles with this device.

We separate the front part of the hedgehog, and decorate the rest of the body, row by row, with thorns. To do this, you need to deepen the stack into plasticine, and then pull it up. Having made needles, you should supplement the toy with eyes, nose and, if desired, decorate with pre-made apples or pears.

Hedgehog from ball plasticine

Modern materials provide a lot of possibilities. For example, create texture toys. From ball plasticine you can mold very interesting hedgehog. To do this, we roll an oval out of the material. We create a base on this figure so that it does not roll on the table. To do this, we compact the plasticine by tapping the workpiece on the table. We will create a muzzle of a hedgehog from ordinary plasticine. This will enhance the contrast between textured and smooth material. We roll a ball of brown plasticine. Pull out the cone with three fingers. We attach the workpiece to the base with the flat side.

With the help of stacks, you need to make a hedgehog mouth. We cut the cone almost at the very base and shift the part of the plasticine down. Now you need to make the eyes and nose. From white plasticine we roll two balls, and from black three. First we make the whites of the eyes, then we supplement them with pupils and attach the nose. If desired, apples and mushrooms can be molded from colored plasticine. These figurines should be placed on the hedgehog's back.

Spiny hedgehogs are nocturnal animals. It is unlikely that your child will see them in the city, but in nature, in the village - it is quite possible. If you are lucky enough to see a unique snorting animal, be sure to treat it with milk, because this is a favorite delicacy for a hedgehog.

In the given modeling lesson, we will create a charming hedgehog with you. Naturally, we, first of all, should show the thorns, because this is the main distinguishing feature hedgehogs. For this we will use black plates, but you can fantasize and experiment with cloves, wire and even pasta.

Take the following materials for sculpting a hedgehog:

• yellow (or beige plasticine);
• black plasticine;
• stack.

1. A dark mass is necessary, as we have already mentioned, for sculpting a prickly hedgehog coat. However, instead of it, you can use dark brown, gray plates or any other available materials. The body of the animal itself can be yellow, beige or orange.

2. Roll up the body-ball for sculpting a hedgehog.

3. Pull out the ball.

4. Sharpen the nose.

5. Prepare a voluminous black cake. At this stage, you can not give it a clear form.

6. Stick a black cake on the elongated body of the little animal, leaving only the nose.

7. Attach a black bead-nose and two small ears - dock them with a black fur coat.

8. Stick eyes on the muzzle.

9. Divide the remaining yellow plasticine into four pieces, first roll the balls, then the droplets, then turn the droplets into paws.

10. Attach the legs to the body.

11. And the last most interesting stage is the transformation of a fur coat into thorns. Make a few notches with a stack, pulling the released plasticine with your fingers into triangular needles.

The little hedgehog is ready, he can run away into the forest, but if you treat him with a mushroom or an apple together with your child, this will not happen.

Hedgehogs are prickly but very cute animals. And they are very useful in the garden, they help against pests such as snails that can destroy our entire crop.

Hedgehogs are older than mammoths, they survived the ice age, and now they are rightfully considered one of the oldest mammals.

Let's make a mother hedgehog and a hedgehog.

We need a stack, seeds and plasticine black, brown, green, red, yellow, white.

So, we will start with brown plasticine droplets. Our eyes will be made of balls of white, green and black colors. Drops need to be bent up, forming a muzzle. At the tip we have a spout - a ball of black plasticine.

We make needles from seeds. In a hedgehog, the seeds are pointed upwards, and in a fluffy hedgehog, the seeds are stuck with a point in the body.

Our family is very resourceful. Let's make apples, mushrooms. For apples, we use red and yellow balls, black sausages for twigs and green drops for leaves. We have mushrooms from halves of one ball of brown plasticine for hats and legs from ovals of white plasticine.

If your child loves to sculpt various animals from plasticine, then invite him to mold a hedgehog from plasticine. The kid will be very happy to replenish his plasticine collection with a new craft. But first, read the instructions below, which displays each stage of sculpting a hedgehog. In the process of creating needles, the child may need your help.

To sculpt a hedgehog, prepare the following tools and basic material:

• a set of children's plasticine;
• small scissors;
• plastic knife and stacks;
• toothpick.

How to make a plasticine hedgehog

Step 1. First, create a muzzle of a hedgehog, for which we need a light brown shade of plasticine. To get such a tone of the mass, mix two balls - brown and white color. Gently knead them with your fingers so that the stains disappear. Then we roll a small piece of the resulting mass into a ball. Next, we give the ball a cone-shaped mold. The muzzle preparation is ready.

Step 2. From brown or dark brown we sculpt the body of the animal. We roll one block into a ball, and then flatten it to get a uniform oval.

Step 3. Now we connect the two created parts together.

Step 4. We make out the junction of the torso and head with flat drop-shaped details from brown plasticine.

Step 5. Then, from the light brown tone of the mass, we blind a couple of round ears. Using a toothpick, fix them on the hedgehog's head. The area between the ears is filled with flat blanks-needles.

Step 6. We proceed to the formation of needles on the back of the animal. For this we need small scissors. We cut the plasticine surface with the tip of scissors. With the tip of a toothpick, we push the middle of the incised needles. We will also make some shallow incisions on the front needles at the hedgehog's head.

Step 7. With a stack with a ball at the end, we push two holes for the peephole. In the middle of the pits we fix black balls-eyes. We also attach a mini-nose to the tip of the muzzle. With the tip of a plastic knife or stack, cut through the mouth and folds on the spout.