The weaving of the bracelet can be chosen using beads.

We need a diagram, a fishing line and the beads themselves.

It is necessary to create an inscription of the name by connecting the letters to each other or by sewing them onto the fabric.

Classics dictates to us the interweaving of the name into the bauble itself.

I offer you an easier way, since beading is not clear to everyone. The girl in the video will tell you everything.

When I was at school, various baubles and beaded bracelets were in fashion. I also wove a bracelet with a name for myself, my girlfriends, my sister. It's easy to do. First, I drew a diagram in a notebook with cells - both letters and a pattern (1 cell - 1 bead). Then I pulled rows with threads onto the book, the number is the same as in the diagram. The threads could be from 5 to 20 (I did not make the bracelet wider). After that, she began to weave a beaded canvas, as it were - we take a needle and thread, string the number of beads necessary for one vertical row, place them under the rows of threads stretched on the book, and then we stretch the needle through the beads through one. Somehow I wept.)

Here are some examples of letters:





The video shows the process of bead weaving. It was in this way that I wove bracelets with names, only I took a book as a loom.

You can of course weave in a different way. For example, since in this master class

Yes, I remember such a fashion among girls, I remember weaving baubles from beads with their names and even surnames, if they are not very long. Now this task is not only facilitated, but also creative. Now there are beads with letters, you can also find cubes with letters, different colors, shapes, in general, it turns out cool. And you can make your own, unlike anyone else's bracelet. Here you can watch the video.







4599/post277567028/

I used to be fond of weaving various bracelets, I made them with names, and with various patterns, beads. You can make a bracelet with a name different ways, I usually made from beads, from threads. Here in this video, the girl tells how to make a bracelet with a name from floss threads.

I also made other bracelets from threads, and I took a strip from a bottle as a basis. This is also easy to do. There is a master class here, the only diagram is shown there simple pattern, but the name is done in the same way, you just need to draw up a diagram as shown in the video above.

For a child, the first step in learning the alphabet is understanding how their name is spelled. Creating personalized bracelets from beads or beads makes it possible to get interesting decorations and help children younger age learn to read. This activity helps develop fine motor skills and just lets you have fun together. Students will be interested in creating personalized accessories and sharing them with their friends.

Weaving bracelets for child development

Personalized bracelet - great idea for a gift to your loved ones. You can try making decorations for mom and daughter and then turn them into gift set. with letters will help the child learn to recognize his name and write it down. The kid will definitely like to do with his parents beautiful jewelry that he himself can wear. Assembly of jewelry develops Creative skills and a sense of beauty. Stringing beads and other small elements helps to strengthen the muscles of the hands. Creation various models, counting beads and pronunciation of letters will create even more opportunities for learning.

Learning to read when weaving a bracelet

For a child, if he has never stringed beads before, it is more convenient to use large plastic or wooden beads to assemble name bracelets. On the initial stage pour all the letters into a separate container and let the baby find necessary elements. If the baby needs help, tell him where the correct parts are, or write his name in large capital letters on a piece of paper. This makes it easier for children to find the right beads. Ask your child questions to guide him as needed:

1. "What letter is this?"
2. "Is it in your name?"
3. "Where is it in your name?"
4. What letter comes after it?
5. What letter is in front of it?

How to weave personalized bracelets

There are several simple ways make a bracelet with letters:

1. Make a beaded jewelry according to the scheme. To create such accessories, a fishing line, thin wire or monofilament is usually used.
2. Make a name bracelet out of rubber bands.
3. Assemble the jewelry partly from beads, adding beads with letters to the center.
4. Weave a tourniquet from a thin leather cord or rope, tying beads with letters.
5. Use soft silicone beads, pendants and a blank for the bracelet.

Beaded bracelet

In the first version, you need beads of several colors, a weaving pattern and some additional materials to work:

• special container for beads;
• scissors;
• wire cutters or pliers;
• fasteners for a bracelet;
• wire or string.

You can make a diagram yourself, using a picture with tips, where the beads for each letter are distributed into cells. Weaving technique is chosen based on your own skills. Most often, hand or machine weaving or “monastic weaving” is used for bracelets.

Name bracelet made of rubber bands

Another option for creating a bracelet: weaving from rubber bands. A name bracelet made of this material can be made in many ways, but most often, beads with letters or plastic pendants are simply added to a standard-shaped product. In work, any color of rubber bands is used. Additionally prepare a clasp, wire, slingshot and hook for weaving. Instead of a machine tool, two pencils fastened together are sometimes used. The beginning of the bracelet is woven as usual, but then you need to use a wire to thread the rubber band into the last letter of the name and add it to the overall pattern. Next, you need to add an empty elastic band to make the decoration plastic, then string the next bead with a letter on the wire again, drag the elastic band through it and add it to the bracelet. When the name is finished, weaving continues as usual again.

Rope friendship bracelet

The easiest option to make a personalized bracelet is to weave it from a thick thread, rope or leather cord, adding a few beads with letters.

Decoration process:

Now the product is ready. Beads with letters allow you to create not only name bracelets, but also add whole phrases and wishes to jewelry. Because such crafts are ideal as a gift, they are often given as a sign of friendship.

Hello, dear visitors of the 7beads online jewelry accessories store!

A wonderful holiday is approaching - the most feminine, most spring and pleasant for every woman! March 8!

And since February of each year, the most frequent queries in search engines are, of course, related to this holiday! But we can solve at least one problem for boys: what to give classmates on March 8?

You don't even have to guess! Personalized bracelets made with your own hands! What could be better! Well, of course, weaving a bead bracelet is a rather difficult task for the male. Then the masters of their craft come to your aid! And where to find them? Join our groups in social networks and choose your master to taste. And for you, masters, a little life hack, so to speak... Feel free to join our groups. Very often people come to us with a question - where can I order a personalized pin, bracelet, holder. We always send to look for our needlewomen in our VKontakte group - Accessories for jewelry. And clients find their fairies!

V given master class, we will learn how to make personalized bracelets with our own hands from beads, in which we will take spandex as a basis - a strong elastic band that is indispensable in the manufacture of jewelry.

In principle, there is nothing difficult in stringing beads on spandex, but there are two questions that a beginner will definitely face: how to tie spandex and where to hide the knot.

Therefore, now we will look at how to do all this using the example of such a cute name bracelet. By the way, we already learned how to tie knots in the master class ""

In the work, we will need the rest of the accessories (beads, hats, pendant letters, etc.), which you will choose for the bracelet with the name. Everything you need is in our store.

We put beads, hats and other components on an elastic band and make one simple knot, after which we make a knot again, but not a simple one, but a double one. That is, in one loop we thread the tip of spandex twice. We tighten it tightly and make a couple more simple knots.

We tied the knot, now it remains to hide it. To do this, we stretch one of the ends of the spandex into the next bead. We pull the knot in the middle of the bead and cut off the excess ends.

And that's it!) The bracelet is durable and neat. And most importantly, the size is universal. No fasteners needed - put your hand in and you're done!

In the same way, we get a delicate bracelet with the name Galia in white and pink colors. And let's not forget the bead from the evil eye!

This example is suitable for male hand. Although, girls often wear jewelry with the names of their young people.

Here, as a pendant, we used a letter for stacked bracelets. It attaches easily with a pin. On the opposite side - a bow pendant, we used similar fittings when we made:

Bright, juicy and passionate bracelet for Zarina. The enamel-covered pendant in the form of bitten lips turned out to be insanely popular among our customers!

For dessert - a very delicate bracelet self made, made entirely of white beads 10mm in size for Valeria. A satin ribbon bow is attached to the pendant.

So, it is clear that making personalized bracelets with your own hands is not difficult! It would be a wish!

And if you are reading our master class, then there is a desire!)

Ask questions, join us on social networks and visit us often.

Being a bright personality is not shameful. Some, of course, consider sticking out their own name as arrogance, but agree that this is very convenient for dating? A person immediately sees your name, you don’t even have to ask.

Personalized bracelets, pendants, necklaces are now in fashion. They are made of wire, fabric, metal fittings. Entire shops have appeared that offer us a set of letters made of metal or plastic. With the help of such blanks, you can collect your name with your own hands. A bracelet with a name will adorn your wrist and add zest to your look.

But the author of the these-days blog, fashionista Jade Alice, offers us to make such a wire decoration. Naturally, in order to demonstrate this master class to us, she chose (oddly enough) her own name.

You will need copper wire and round pliers. It is also advisable to have a name in front of your eyes, made in a special font - this way you will check what you get according to the model.

We turn the end of the wire into a small spiral.

We start with the last letter. It is desirable that initially the metal cord was not short, otherwise you will be left without a capital letter.

Round nose pliers are very handy for bending wire. If the letter does not want to work out, straighten it and try again.

Do not forget to attach the craft to the sample.

And now your personalized bracelet with your own hands is ready!

Make the ends of the decoration in the form of a loop and a hook. How to do this is clearly seen in this:

In addition to yourself, you can please a girlfriend or sister with a similar little thing.

This type of needlework, like weaving beaded bracelets, may seem very complicated. Indeed, having seen enough of the beautiful and, undoubtedly, very complex works that attract the eye, it is easy to panic and lose confidence in your abilities. However, there are many models of bracelets that are easy to make even for a beginner, and at the same time they look very good. This master class will introduce some of them.

simple bracelet

This exquisite bracelet is perfect for beginners, easy to weave and stylish.

Bracelet materials:

• beads;
• beads;
• fishing line or kapron thread;
• two needles;

Beads and beads, choose at your discretion. It is important that you like them, then the work will go easier. For our MK, we used aged bronze metallized beads and white mother-of-pearl beads.

As you can see in the diagram, we have 5 beads per bead.

We take a fishing line or kapron thread. But keep in mind that using it, we need needles at both ends. We calculate the length required for the bracelet based on the circumference of the wrist: multiply the length of the wrist by 2 and add a small allowance of about 10 cm for the convenience of work. another 4 beads and cross the threads in the fifth strung. So weave to the end

Name bracelet weaving technique

There are at least two ways to weave a bracelet with a name: traditional and bead weaving. When choosing how to weave a beaded bracelet with a name, be guided by your taste and skill level.

Before starting work, draw a diagram of the future bracelet on a piece of paper in a box. Each cell of the scheme will correspond to one bead. different colors draw a pattern or name that will be on the bracelet. Also sort and calibrate the beads: in order for the product to come out neat, it must be the same size.

For work you will need:

• fishing line or thread (kapron, waxed);
• beads different colors(two or more - depending on the idea);
• scheme.

The simplest version of weaving is a cross.

1. We fold the thread in half, put on 4 beads. We pass the second thread into the last one and tighten it. We put 2 beads on the left end, and 1 on the right end. In this case, we use beads of the main color.
2. Pass the right thread through the second bead and tighten again. In this way we weave the length of our bracelet.
3. We weave the name in the same way, using beads of a contrasting color according to the scheme.
4. If you like wider bracelets, then string 3 beads per thread and pass the second tail through the third bead. Both threads, therefore, should come out of the side bead of the first row.
5. Then, on the right tail of the thread we string 2 beads, on the left - 1 and pass the right end into it. The sides will switch places. Thread the thread through the side bead of the first row and tighten.
6. Again we put on a bead on both threads. We stretch the right thread through the left bead and the side bead in the previous row, do not forget to tighten the thread.
7. According to this sequence, weave according to the scheme, weaving where you need beads of the desired color.

If you decide to try weaving a bracelet, then, among other things, you will need a machine. It can be made from a box or container. There are many textual descriptions of the creation of a loom, but it is better, as they say, to see once.

The bracelet made in this way looks neat, and the work is noticeably accelerated.

We pull the threads on the loom. They should be 1 more than the beads in the row. We thread a working thread or fishing line into the needle, fasten it on the first warp thread on the left. We put as many beads on the needle as in the row diagram.

We weave a row, stretching the thread over and under the base. The next one goes in the opposite direction.

So we string rows with beads to the end of the pattern. We fix the last bead. We remove the warp threads from the machine, we make ties.

If you decide to study the weaving of beaded bracelets, a video to illustrate the process will be very helpful.