Models of knitted jackets without fasteners. Knitted white jacket without a fastener

This warm and delicate openwork jacket will accentuate your feminine image while walking and at home.

Dimensions: 34-42 (44-50)

You will need: 300 (325) g pink (No. 00035) Schachenmayr SOFT MIX (45% polyamide, 30% alpaca, 25% wool, 113 m / 25 g); knitting needles number 5.

Texture Pattern A: an even number of loops. 1st row ( front side): edge, * 1, 1, repeat from *, edge. From the 2nd to the 4th row: knit loops according to the pattern. 5th row: shift pattern, hem, *purl 1, front 1, repeat from *, hem. From the 6th to the 8th row: knit loops according to the pattern. Repeat from 1st to 8th row.

Texture Pattern B: Even number of loops: 1st row (front side): edge, * purl 1, front 1, repeat from *, edge. From the 2nd to the 6th row: knit loops according to the pattern. 7th row: shift the pattern: edge, * 1 front, 1 purl, repeat from *, edge. From the 8th to the 12th row: knit loops according to the pattern. Repeat from 1st to 12th row.

Knitting density: Texture pattern A and B: 16-17 loops and 27 rows = 10 by 10 centimeters.

Left shelf: on needles No. 5, cast on 60 (64) loops and knit with texture pattern A. 1st row = right side, start with the edge, 1 front. After 52 rows, or 19 centimeters, continue with texture pattern B. Start the 1st front row from the edge, 1 purl. For the armhole, after 39 centimeters from the cast-on edge, close from the right edge 1 time 13 loops = 47 (51) loops. For V-neck neckline through 44 (46) centimeters from the cast-on edge in the front row, knit to the last 2 loops of the row, then from the left side edge, knit or 2 loops together purl in texture pattern B. Repeat these decreases in every second row 13 times and in every 4- m row 4 times (in every second row 18 times and in every 4th row 2 times) = 29 (30) loops. At a height of 63.5 (65.5) centimeters close the remaining loops.

Right shelf: knit symmetrically to the left shelf. Start patterns A and B in the corresponding rows with the edge, 1 loop in the pattern. To reduce the V-shaped neckline, knit instead of 2 loops together with the front 2 loops together with the front crossed.

Sleeves: On needles No. 5, cast on 72 (80) loops and knit with texture pattern A. 1st row = front side, start with hem, front 1. After 28 rows or 10 cm, continue with texture pattern B, shifting stitches on the 1st row, purl over knit, knit over purl. To form a sleeve in the 9th row from the cast-on edge, on both sides 1 time in one loop, then in each 12th row 4 times in one loop, include the added loops in the corresponding texture pattern. After 48 centimeters, close all loops.

Pocket (2 parts): On needles No. 5, cast on 35 loops and knit 43 rows of 16 centimeters of texture pattern A. In the next purl row, close all loops according to the pattern.

Assembly: tuck the left side edge of the left shelf and the right side edge of the right shelf into 2 loops = about 1 centimeter, sew. Sew the pockets to the shelves, as shown in the pattern. Run, sew on sleeves, see * on the pattern. Run side seams and sleeve seams.

Dimensions: 36/38 (40/42) 44/46

You will need: yarn (77% mohair, 23% silk; 175 m / 25 g) - 200 (250) 300 g pale lilac; knitting needles number 3 and 8; circular knitting needles No. 3; hook number 3.

Facial surface: front rows - front loops, purl rows - purl loops.

Decorative reductions 2 p.: from the left edge: knit the loops of the row according to the pattern until the last 5 p. Leave 1 p. on the auxiliary knitting needle before work, knit the next loop with the front one and stretch the removed loop through the knitted one, knit the next loop with the front one and stretch the loop from the auxiliary knitting needle through it, finish the chrome. From the right edge: remove 1 p., as with facial knitting, leave 2 p. on the auxiliary knitting needle at work, return the removed loop to the left knitting needle. 2 p. Knit together with the front, then knit the front loop from the auxiliary knitting needle.

Knitting density: front surface (needle number 3): 22.5 p. x 30 p. = 10 x 10 cm; front surface (needle number 8): 10.5 p. x 13 p. = 10 x 10 cm.

ATTENTION: sleeves are knitted from top to bottom. The arrow in the drawing of the details of the pattern indicates the direction of knitting. The expansion of the part due to the different density of the pattern (as a result of the transition to thicker knitting needles) is displayed in the drawing as a bevel.

Back: on knitting needles No. 3, dial 114 (124) 133 p. and knit stockinette stitch. After 41.5 cm = 124 p. (42 cm = 126 R.) 42.5 cm = 128 R. from the typesetting row, close on both sides for armholes, first 1 time for 3 p. = on the needles 108 (118) 127 p. Then, for bevels, armholes, add on both sides 1 time in the next 2nd p. and another 13 (14) 15 times in every 4th p. 1 p. = 136 (148) 159 p. Through 60.5 cm = 182 p. (62.5 cm = 188 R.) 64.5 cm = 194 R. from the typesetting row, close on both sides for the shoulder bevels, first 1 roses for 3 p., then in each 2nd p. 12 more times for 3 points (8 times for 3 points and 4 times for 4 points) 4 times for 3 points and 8 times for 4 points. After 66.5 cm = 200 p. (68.5 cm = 206 R.) 70.5 cm = 212 R. from the typesetting row, close the middle 30 (34) 37 p. for the neckline and finish both sides separately. To round the neck, close from the inner edge in every 2nd p. 1 time 4 p., 1 time 3 p. and 1 time 1 p. Through 69 cm = 208 p. (71 cm = 214 R.) 73 cm = 220 R. from the typesetting row, close the remaining 6 p. of the shoulder. Finish the second side symmetrically to the first.

Left shelf: on knitting needles No. 3, dial 92 (99) 106 p. And knit with facial stitch. After 33 cm = 100 r. (35 cm = 106 R.) 37 cm = 112 R. from the typesetting row, first close from the left edge for the bevel of the cutout 1 time 4 p. and in each 2nd p. 1 time 4 sts and 2 times 3 sts, then decrease (see Decorative reductions) 22 (24) 26 times 2 sts each. Armhole, armhole bevel and shoulder bevel from the right edge, as described for the back. Close the remaining 6 sts of the shoulder at the same height as on the back.

Right shelf: knit like a left shelf, but in a mirror image.

Sleeves: on knitting needles No. 3, freely dial 70 (76) 84 p. and knit 1.5 cm = 4 p. facial smoothness. Switch to needle size 8 and continue in stockinette stitch. After 32.5 cm = 44 p. from the typesetting row, close all the loops with facial ones.

Waistband: on knitting needles No. 3, dial 52 sts and knit with front stitch. Through 165 cm = 496 p. (175 cm = 526 R.) 185 cm = 556 R. from the typesetting row, close the loops with facial ones.

Assembly: sew shoulder and side seams. Crochet the lower edge of the product with hook No. 3 to tie 1 p. conn. columns. For the front straps, dial on knitting needles No. 3 along the straight edges of the shelves for 75 (79) 84 p. And knit 1 cm = 3 p. front stitch, starting with the back row. Then close the loops with facial ones. Along cut bevels (including short sides front straps) dial on circular knitting needles No. 3 for 114 (119) 125 p., between them along the edge of the neck of the back another 48 (52) 55 p. and on all 276 (290) 305 p. knit 1 cm = 3 p. front stitch, starting with the back row. Then close the loops with facial ones. The seams of the sleeves are made on the upper sections 2 cm long from the typesetting row. Then sew on the sleeves, slightly fitting the armhole, while aligning the shoulder seam with the short seam of the sleeve. On the tie belt, measure 85 (90) 95 cm from one end (= back of the belt) and make a mark across the entire width. Sew the belt along the marked line to the side seam of the jacket at a distance of 15 (15.5) 16 cm from the bottom edge.

Fashionable loose jacket without a fastener with patterns and a free description of knitting.

You will need: 14 (14, 15, 15, 16) skeins of black (Noir 0383) Bouton D'Or Cocoon yarn, consisting of 60% alpaca, 40% wool, thread length 75 meters in 50 grams; 5 (5, 6, 6, 6) skeins of dark gray (Manoir 1148), 4 skeins of brown (Korrigan 1110) and cream (Genie 1109), 2 (2, 3, 3, 3) skeins of beige (Elfe 1107) yarn Bouton D'Or Legende, consisting of 60% alpaca, 40% wool, thread length 75 meters in 50 grams; knitting needles number 9; hook number 8.

Jacket sizes without fastening: 34-36 (38-40, 42-44, 46-48, 50-52).

Garter stitch: front and back rows - front loops.

Knitting density of a jacket without a fastener: garter stitch - 10 loops and 18 rows corresponds to 10 by 10 cm.

Jacket knit with a thread in two additions.

Description of knitting a jacket without a fastener

Back and half of the sleeve: for half of the sleeve, dial 24 loops with black thread (two additions) (25 loops with black thread (two additions), 26 loops with black and dark gray threads, 27 loops with dark gray and brown threads, 28 loops dark - with gray and brown threads and knit according to the appropriate counting pattern.

Right front and half sleeve: for half sleeve, cast on 24 sts with black thread (two ply), 25 sts with black thread (two ply), 26 sts with black and dark gray thread, 27 sts with dark gray and brown thread, 28 sts dark gray and brown threads and knit according to the counting pattern.

Knit the left front and half of the sleeve symmetrically.

Assembly: connect the details of the jacket with black thread as follows:

Crochet 1 row with connecting posts, performing each of them between the edge and adjacent loop of the part or 1 row along the edge of each part, then work 1 row with single crochets, while crocheting half the loop of each row from the connecting post.

An unusual silhouette and cotton with the addition of viscose are the main components of a bright green jacket. Not only will it keep you warm when it's chilly, but it will also let your skin breathe when it's hot.

To knit a free bb jacket without a fastener in size 42-48, you will need:

1000 g of yarn (72% cotton, 20% viscose, 8% linen, 105 m / 50 g), straight needles No. 4 and No. 4.5 and circular needles No. 4.5. And you can buy everything you need for knitting in the online store Businka32.rf - yarn, embroidery kits, beads in a large assortment.

Description of knitting a loose jacket without a fastener with knitting needles:

Back: on knitting needles No. 4.5, dial 123 loops and knit with the pattern shown in the diagram. Repeat from the 1st to the 18th row of the pattern. At a height of 41 cm, close for armholes on both sides in each 2nd row 1x3, 1x2 and 5x1 loops. After 20 cm from the beginning of the armhole, add on both sides in each 2nd row 5x1, 1x2 loops. You should end up with 117 stitches. Set aside all of them after 24 cm from the beginning of the armhole.

Left shelf: cast on 143 stitches and knit in exactly the same way as the back, similarly work the armhole on right side shelves. After that, you should get 140 loops, which are also set aside.

Right shelf: tie symmetrically.

Collar: on circular knitting needles, transfer the loops laid earlier at the beginning of the right shelf, then the back and, finally, the left shelf, while in the 1st row between the shelves and the back, dial an additional 3 loops. Thus, in total there will be 403 loops on circular needles. Knit them with the pattern shown in the diagram and after 25 cm close all the loops of the collar.

Sleeves: on knitting needles No. 4, dial 52 loops, tie 2 cm with an elastic band 1x1. Switch to needles No. 4.5 and knit with the wrong side, adding sleeves for the bevels in each 12th row on both sides of a 9x1 loop. At a sleeve height of 46 cm, form an okat: close on both sides, first in each 2nd row 1x3 loops, 1x2 loops, 5x1 loops, then in each 4th row 3x1 loops, and then in each 2nd row - 7x1, 1x2 and 1x3 loops. After 16 cm from the beginning of the sleeve, close the remaining loops.

Assembly: sew side seams, sew in sleeves and sew their seams.



Knitted A white open-front jacket will be the hit of the season: snow-white yarn especially effectively emphasizes the mesh pattern, framed by wide strips of garter stitch.

Dimensions: 36/38 (42/44) 48/50

You will need:

  • yarn (75% cotton. 25% linen; 98 m / 50 g) - 550 (600) 650 g white;
  • knitting needles number 4;
  • circular needles number 4.

Patterns and knitting:

Pattern 1: garter stitch = rows in the forward and reverse direction: facial and purl rows - facial loops, Circular rows: alternately 1 circular row of facial. Purl 1 round row.

Pattern 2: openwork pattern(the number of loops is a multiple of 8 + 6 + 2 edge) = knit acc. scheme. It has knit and purl rows. Start with 1 hem and loops before rapport, constantly repeat rapport, end with loops after rapport and 1 hem. Constantly repeat the 1-8th rows.

Knitting density: 22 p. x 32 p. = 10 x 10 cm.

Knitted white jacket without a fastener description:

Back:

dial 96 (112) 128 loops on the needles and tie 6 cm for the strap with pattern 1. Continue working with pattern 2. After 25 cm = 80 rows from the strap, dial 1 x 28 new stitches for the sleeves on both sides and include in the pattern 2 = 152 (168) 184 p. After 47.5 cm = 152 rows (50 cm = 160 rows) 52.5 cm = 168 rows from the bar close all the loops, while the middle 32 p. form the neck, the outer 60 (68) 76 p. - sleeves and shoulders.

Left shelf:

Cast on 32 (40) 48 sts on the needles and knit the bar as on the back. Continue working with pattern 2. Increase for the sleeve along the right edge, as on the back = 60 (68) 76 p. At the height of the back, close all the loops.

Right shelf:

knit in the same way as the left shelf, but in a mirror image.

Assembly:

sew the shoulder seams and the top seams of the sleeves. For the plank, cast on circular knitting needles along the sides of the shelves for 110 (118) 126 loops, 32 loops along the edge of the neck of the back and tie 8 cm on all 252 (268) 284 loops with pattern 1. Then close all the loops as facial ones. Run the side seams and bottom seams of the sleeves. For sleeve slats, cast on circular needles along the bottom edge of each sleeve 94 (110) 126 loops and knit with pattern 1 circular rows. With a strap width of 9 cm, close all the loops as if they were front ones.

A knitted white jacket without a fastener is ready. Knit with pleasure along with the site!