Many representatives of the weaker sex watch their figure. And in pursuit of beautiful external data, they throw off, most succeed, but at the same time they have to think about how to change their wardrobe. After all, loved ones become big, and you want to wear them all the time. In this case, if you have certain skills and sewing machine you can make your own outfit.

First you need to immediately note that you can reduce the trousers yourself only two sizes maximum; if a larger value is required, then you will have to rip and reshape the product. In this case, beginners do not need to overestimate their strength and it is best to hand over the trousers for alteration in the atelier, otherwise there is a risk that the outfit may “skew” if sewn incorrectly.

What do you need to know?

To ensure that the product does not lose its original appearance, it must be sutured simultaneously from the side and from the inner (step) seam.

Sewing on only one side is possible only if when you need to remove a little matter on the sides.

As soon as it became noticeable that the legs have lost weight and only the hips need to be “cut off”, then you can sew the trousers only from the inside seam.

How to sew on trousers?

• first you need to find out exactly where you need to take in the trousers (at the waist, on the hips or from below);
• we unpick the bottom substrate, we do it carefully with a special tool - a ripper, if it is not there, then ordinary nail scissors or a blade will do;
• turn the trousers inside out and put them on. Then we make markings with pieces of old soap or insert pins in the right places;
• we draw a straight line (or a narrowing line) from the top point to the bottom, we do the same with the second leg, we manually sew the line along the lines along the inner seam;
• we turn out the trousers and try them on, you can walk around the room, and also do squats. If the new one does not hinder movement, then cut off the excess fabric with a margin of 1 centimeter from the edge;
• we pass the sewing machine along the line;
• some jeans decorate decorative seam, in this case, we select the color of the thread and the length of the line so that there is no difference from the old seams;
• the edges need to be sewn with an overlock, and if such a tool is not available, then you can sew the edges with a zigzag or use a special nozzle called the “overlock foot”;
• after that, it is imperative to iron the new seam so that no traces of the old cut remain. During wet-heat treatment, in order not to leave traces of hem on the front side, you need to put a strip of drawing paper along the edges.

Sewing the top of the pants

When it comes to the waist, then here, too, you need to provide that there are no constrictions. You can try to remove the excess at the side seams and sew them into the middle seam. Either drag them into darts, or, alternatively, add separate darts.

It often happens that the waist and hips do not match the standard sizes. In this case, trousers that fit well on the hips may be somewhat wide at the waist.

When the difference is insignificant, you can correct it with small tucks or put it into separate tucks.

In order for the pants to look perfect after fitting, you need to do the following operations:

• turn trousers inside out;
• rip the lower part of the belt from the wrong side (this is necessary so that after the alteration there are no traces left on the belt after suturing);
• sew on the belt and side seams;
• add darts on the front and back of the trousers;
• put on the product and, if there is discomfort, then make adjustments and re-sew the seams;
• steam all seams on the ironing board;
• carefully sew back the belt;
• After you have finished sewing, iron the trousers again with a cotton cloth.

These tips apply to classic fabrics. Materials such as slippery silk, thin, bologna fabrics, as well as thick and naughty fabrics differ in tailoring and therefore it is better not to start making such products for a beginner. Once you have the skill, you can already move on to more complex products.

The female figure is a variable value. And that's okay. To recover a little over the winter or to start losing weight rapidly by the beach season is common to almost everyone. But clothes don't have the magical ability to do the same. The “perfect” skirt or cool jeans began to hang around the waist? Don't rush to the studio. Here's how to fix this defect yourself and in just a couple of minutes.

If your favorite skirt or jeans began to hang hopelessly at the waist, their mistress has several options: a) start quickly replenishing the lost centimeters, leaning on sweets; b) put the thing in the closet away until better (full) times; c) go to the studio and ask to be sewn in. Which, of course, is far from free. Add another option to the piggy bank: “tighten” the waist yourself. No special skills, everything is simple!

To “sew in” a skirt or trousers at the waist, you don’t even need a sewing machine. Instead, prepare:

1. Needle and thread;
2. Sewing hooks with eyelets.

To get started, arrange a fitting and measure how many "extra" centimeters there are at the waist of jeans or a skirt. Now arm yourself with a ruler and set aside the same amount on your belt: to the right of the very top of your fly. Sew a metal loop there.

Now it's up to the small: on the opposite side (to the left of the fly), sew the hook itself. Just be careful that both the hook and loop are clearly on the same line. Otherwise, the magic won't work.

Now you just need to fasten the hook, tucking in an extra piece of fabric, and tighten the zipper.

In such a simple way, a beloved, but a big thing has become perfectly fitted to the figure. The method works best for skirts, especially "sun-flared" and pleats - the more folds, the less inconspicuous interference. More details in the video below.

Favorite pants are too big or don't fit fashion trends? It does not matter, a little patience - and everything will be in perfect order. Arm yourself with a needle and thread and a positive mood ...

Sewing trousers at the side seams

If you need to sew in trousers quite a bit, then this can be done with only one seam (inner, outer or middle), which will be easier to work with. External seams come with decorative trim or external front seams, it is better not to touch them to fit the trousers:

• First you need to unpick the edge of the leg, on the side from which there will be a new seam, and the belt of the trousers. It should be sutured along the entire length of the leg so that there are no seam defects.
• Turn the product inside out, determine the required leg width and draw a line of the intended seam on both legs with a piece of chalk or remnant. This stage needs accuracy in execution, otherwise you risk getting legs of different widths.
• Baste the seam with pins or thread. Then you should try on the sutured product. If the result suits you, then make a line.
• On the sewing machine it is necessary to cut off the excess edge and process it with an overlock or zigzag.
• Sew on the belt and the bottom edge of the legs, choose a thread similar in color to your own.
• Now you can smooth out the resulting seam with an iron.

Sewing trousers on both sides

If you need to sew in trousers for a couple of sizes or flared trousers, you will have to work with the inner and outer seam. This is the most labor intensive way. The fitting procedure is the same as in the first case. The only difference is that the width of the legs should be reduced on both sides, as accurately as possible, transfer the measurements from one leg to the other. Further:

• We rip in the right places;
• We turn out and outline the lines of the seams;
• Baste with pins or thread, try on;
• Sew and cut off the excess edge;
• We steam the seams with an iron.

Sewing trousers along the middle seam

This method of fitting is suitable if you have to reduce the size of the trousers at the waist. Initially, determine how much you will sew in trousers by basting and trying on, and then you need to:

• Rip off the belt and cut it in half;
• Turn the trousers inside out, outline a new seam;
• Make a line and cut off the excess, process the edges;
• Sew the belt at the right distance and sew it back to its original place;
• Smooth out and steam the seams.

How to sew trousers in the atelier

If you are not friends with a needle and thread, then the easiest and most high-quality way to give a second life to your trousers is to hand them over to an atelier where experienced craftsmen will do everything quickly and well. This will save time and nerves for those who do not like to sew. Not only in the studio you can sew in trousers, but also in clothing repair shops and seamstresses who do work at home. Take a closer look, maybe there are similar establishments near your house.

Not all trousers can be upgraded to fit well. Therefore, before starting work, consider the rationality of your choice. If you want to downsize your trousers by more than 2 sizes, then it is better to buy or sew new ones, since such alteration of the old ones requires a complete recut. And this is a difficult job that requires special skills. Sewing trousers is not difficult, with a little effort and patience and with sewing skills.

If you do not have enough time and do not have sewing skills, the best option would be to contact the atelier, where professionals can sew in a coat for a relatively small fee. But you can try to sew a coat on your own.

On average, it will take you about 1200-1500 rubles to sew in a coat in an atelier

To change the shape of the coat yourself, you will need:

• interlining
• tape measure
• sewing machine
• scissors

First you need to determine how much you need to take in the coat. On average, one size is equal to 4 centimeters, using this measure, calculate how much you will need to reduce the volume of the product. Also check the length of the product, as it may be necessary to shorten the coat.

Then you need to rip off the lining of the coat and turn it inside out. wrong side. Spread the seams of the back and shelves in such a way that a few more centimeters remain before the sleeves. In the event that you sew in a coat for two or more sizes, you will need to open the side seams of the product. Thus, a small piece of the seam located under the sleeves will remain intact.

Step back from the old seams of the back and shelves by about 5-6 millimeters. Using chalk, mark the connecting lines, then sweep together the details of the product. If the coat has to be sewn even on the seams located on the side, you will need to measure the same distance from the old seams, and then prepare all the details of the coat for sewing.

If you are sewing on a coat only in size, and the style of the product does not provide for the presence of medium seams, you will need to reduce it with the help of side seams. If you have to reduce such a coat by two sizes at once, you need to set the desired depth of tucks in advance.

It is recommended to sew a coat with a kapron thread, while the needle must be strong enough. Carefully sew all the marked seams, and then get rid of excess fabric. There are two ways to process the edges of the coat: with an overlock or with a zigzag stitch. The middle seams will need to be ironed with damp gauze so that they are directed towards the center of the back and shelves. You will need to straighten all the side seams and then iron. Iron all darts so that they are directed to the seams located on the side.

Sewing jeans at the waist, hips and legs at home.

When your favorite jeans have become large, you can resort to urgent repairs at home, all this is very simple, and most importantly - economically. You will learn about all the ways to sew trousers from the article.

How to sew jeans on the sides, in the legs?

If you have lost a couple of kilograms, or you are tired of the once fashionable flared trousers, you can easily take them in your legs. After such a home repair, you will receive fashionable skinny jeans.
To properly sew in your favorite thing in your legs, you should know certain secrets:

• Put on jeans turned inside out and mark with pins a place for sewing - it will be at the very feet, but it is better to leave 1-2 cm for shrinkage after washing
• Take off your trousers and lay them flat on the table. Pants must lie flat so that the line does not mow
• Arm yourself with soap white color and sharpen the edge of the tool - with it you will outline the places for sewing
• To start, circle the places near the pins with soap, so the measurements will be more accurate.
• In the future, you will need a thread with a needle and a sewing machine, first sweep the edges of the jeans, be guided by the pin - the lines should go exactly like the measurements
• Try on swept jeans, if such preliminary sewing is suitable, take off the jeans and proceed to the final
• Cut off the excess part of the jeans that extends beyond the intended area and stitch the jeans on a sewing machine
• Overcast the edges with an overlock or zigzag

For the first time, the procedure may seem difficult to you, so if you have expensive jeans, you should practice on some cheaper item. But when you get a good hand, it will be easier for you to carry out such repair work for you.

Video: How to sew jeans on the sides in the legs?

How to sew jeans in the waist?

There is such a situation that jeans sit like a glove on the hips, but at the waist they bulge ugly. In such a situation, minor repairs should also be carried out, which, if you have a sewing machine, can be done at home, for this:

• In the case when the extra width is not more than 2-3 cm, an elastic band can save. Get a wide elastic band, from the inside, cut the belt on each side of the jeans and skip the entire length of the elastic band. Gently sew the elastic to the belt, paying particular attention to the incisions.
• If it is required to take in from 3 to 7 cm, work will be added. First, you should rip the belt at the back, between the side seams.
• Put on jeans turned inside out and ask someone you know to stab the tucks that are on the back with pins. The main thing is that they are evenly spaced from the seam in the middle
• Take off your jeans and carefully sew the parts that were marked
• Then carefully iron the stitched part.
• Take the threads in the color of the main ones and fix the tuck from the outside, laying the line along the entire length
• Next, cut the belt, this can be done by ripping off the middle loop
• Attach the belt to the jeans and measure the excess part that needs to be cut off
• Now you need to re-sew the already cut belt
• Re-sew the waistband to the jeans and close the seam with a belt loop

There is another way by which you can sew in jeans, but it will take you more time and effort. But the result will be very high quality. You need to do the following:

• Undo the loop at the back and open the waistband about 10 cm on each side of the middle seam
• Spread the seam that goes between the legs (it is called the stepper) by 10 cm
• Spread the middle seam, but do not unfold it, as it may move. Just carefully pin it with safety pins. front side
• Go through all the seams from the inside and also fix with pins, after that all fasteners can be removed from the front side
• Iron the seams well
• Insert the legs into each other and, stepping back from the middle seam 2 cm, draw a line, forming a triangle. The drawn line should run along the waistline
• Sew along the drawn line and overcast the edge
• Sew the crotch seam from the inside with one line, from the front - double
• Cut the belt in half and attach to the sewn-in jeans, remove excess fabric
• Sew the belt from the front side, iron and match with the trousers
• Secure with pins and sew neatly

Important: In order for the elastic to be the correct length, measure yourself around your waist with it and sew 3-5 cm less tape into your jeans. So due to stretching, the elastic will be the desired length.

Thanks to this method, you can remove the excess part of the jeans that stood out ugly at the waist. The last option will look especially high quality, but if it seemed too complicated for you, use the rest. With careful execution, the result will definitely be of high quality.

Video: Sewing jeans at the waist

How to sew jeans down a size?

Dropping extra pounds is certainly very uplifting, but it also causes problems with the wardrobe. If your jeans have become large, then this can be completely corrected, especially if the decrease was only a size:

• by the most in a simple way is washing. Expose in washing machine temperature equal to 95C and send the jeans to the hot wash. This process should be repeated twice, and make sure that cold water does not penetrate the jeans.
• When you set the cold rinse mode on the machine, stop the process. Dry washed trousers on a hot radiator or with a steam dryer. This method is good enough, but after a certain time, the jeans can stretch again, so you have to repeat the procedure again.
• Another way is stitching. If the jeans are large at the waist and hips, sew the jeans in at the side. To do this, turn the jeans inside out and mark the places to be cut with a pin.
• Walk along the jeans with soap, break off the pins and mark the places for a new line with threads. Put your jeans back on and if they fit well now, cut off the excess fabric and stitch the pants.
• If the jeans are just right in the hips, and there is a lot of excess fabric in the waist - it does not matter, sew the trousers along the seam that is located at the back. Open the belt loop and cut the belt in the middle
• On each side you need to make tucks - there you will hide excess material. Do not make very long darts, as this may cause ugly folds in the back pocket
• When you have removed all unnecessary, sew the belt to the jeans and return the belt loop
• A very simple way is to sew jeans with side seams. In these places you need to make tucks, for this, spread the line that goes along the side seams
• Next, carefully place the excess fabric under the side seams and stitch the jeans together again. This option is suitable if you have a high-quality machine or thin jeans, since the side seams are quite tight.

If the jeans have become large in size, then it is very easy to fit them thanks to the indicated methods. Do not forget about your favorite thing, everything can be fixed.
Even in the case when the trousers are large in some specific location, you can pay attention and fix this particular part of the jeans. You should not contact the workshops - there you will spend a decent amount.
At home, if you follow these recommendations, you will carry out repair work like a real seamstress. Moreover, you are doing such work for yourself, which means that you will definitely do everything carefully and conscientiously.

Video: How to sew in jeans at the side seams?