Methods for decorating premises using balloons a lot, and new ones are constantly appearing. For example, now in our online store you can buy chains of balloons filled with helium! It turns out a decoration that looks like an arch, although the principle of its manufacture is different.

Here the balls are tied to a special tape. And as they fill with helium, the ribbon rises to form an arch. It looks very beautiful and unusual, especially since the colors of the ribbon and the balls themselves, as well as their shape, can be anything, so you can come up with a lot of cool decorative elements for any holiday!

You can buy inexpensive balloon chains from us

We are trying to distinguish ourselves favorably from our competitors, therefore we offer you good prices for chains of balls, photos of which you can see on this page. Here are several product options, and you can:

• Choose one of your favorites, indicate the colors that we use in the manufacture of the composition, and other attributes, and send the product to the basket;
• Call us or leave a request for a call back, and order your version by phone if you did not find anything similar in the catalog.

What are the chains of balloons?

In fact, in appearance they can be absolutely any, because there are a lot of varieties of balls! For example, we use both regular latex and foil balloons, as well as linkcolon balloons (or linking) - they have "ponytails" on both sides, which allows you to tie them different ways... Various and very colorful compositions are obtained.

At the same time, you can leave a distance between the products by simply tying them to the tape, or you can not leave them (this is the case when using linkoluns). You can additionally decorate the resulting arch with mini-compositions of small balls and balls-shdm.

We are waiting for orders for helium balloon chains!

Leave an order through the site around the clock and daily, or by phone at the hours specified in the "Contacts" section. When ordering a call back, don't worry, you won't have to wait long - we will call you back within a few minutes.

You can pick up the purchase yourself, and if it is inconvenient, then order delivery, which can be carried out at any time of the day! You will find the cost and delivery options in the corresponding section.

We hope that you will like our assortment, and we are waiting for you among our regular customers!

Undoubtedly, many people love balloons, they cause delight and good mood, but the air figures from them look somehow special. The celebration looks more elegant and colorful, and the impressions from it are unforgettable.

Over time, such a direction as twisting appeared - from the English word "twist", which is the modeling of air figures from special balloons, created precisely for these purposes.

Learning how to twist balls and create air figures is real, you just need to be patient, strong balls and a special pump. Balloon figures can be a decoration for a holiday, a gift or a simple decor in the room. It will be especially interesting to learn the art of twisting with children: the process itself will teach perseverance, patience and accuracy, and the result will certainly delight the child.

What you need to twist

You should start by selecting the basic materials that will be needed in teaching twisting and creating shapes from long balls. To get started, you only need a few items, and after acquiring certain skills, the set may increase:

• Long Balloons or SHDM (balls for modeling). The choice of balls must be taken seriously, since the quality and strength of the figure depends on it.
• A two-way piston pump is an essential tool when working with long balls, because strong balls are nearly impossible to inflate without a hand pump. Sometimes the pump is sold in a set with a WDM.
• Scissors, marker and other auxiliary items.

Before inflating long ball, it is recommended to knead it a little - stretch it several times with your hands to warm up the latex material, then it will be much easier to work with the ball.

Rules for Strong Long Ball Figures

After warming up, the ball must be stretched in length and put with a hole on the tip of the pump. The balloons should be inflated slowly and evenly. It is imperative to leave a small tail so that air goes out there and when twisting the ball does not burst, as a rule it is about 10 cm. The thickness of the ball depends on the type of figure, you can navigate step-by-step instructions.

Once the ball reaches the desired length and width, it must be carefully removed from the pump and the tip tightened with a knot. Threads for SHDM are not suitable.

An important rule of a strong figure: twist it only in one direction, for example, clockwise. It is imperative to hold the twisted places with your fingers, since at any moment the figure can unwind and the time spent on it will be in vain.

Twisting types

To get an airy figure in the form of an animal or a flower, a long inflated ball is twisted into bubbles different lengths, and then connects to the castle. Depending on the type of figure, the following types of twisting are distinguished:

• Regular twisting- twisting a small bubble on the ball. The size of the bubble is determined and compressed by hand at this distance, then twisted in one direction about 3-4 times. Subsequent bubbles curl in the same direction.
• Twisting with a lock- fixing 3 consecutive bubbles to a specific figure. 2 extreme bubbles are folded at the place of their junction, then twisted around with the next one in the same place 3-4 times.
• Twisting with a lock (another way)... Two bubbles are twisted and the ball is bent at the place of the last twisting, the working part is compressed and the next bubble is outlined and only then it is twisted together.
• Twisting with a fold- fixing three consecutive bubbles into a figure, where the two outer ones are not twisted, but simply bent. The bubble is twisted, the ball is bent and twisted 2-3 times.

Twisting types can be practiced on balls before the crime of twisting to gain the skill of manual dexterity. When the twisting technique has been worked out in practice, it will be much easier to understand and follow the instructions for shaping the shapes.

Long balloon shapes

Some air figures are not difficult to make, you just need to adhere step by step instructions... Also, each figure has its own characteristics, so attentiveness and perseverance is required - it may not work out right away, but you should not despair, twisting loves perseverance.

Doggies

The most common long ball shape is the poodle. It is not difficult to make a dog, following the instructions below:

• Inflate the balloon with a pump and leave the un-inflated part of about 8 cm.
• Make three bubbles about 4 cm in size, the first is the poodle's face, fix it with your fingers (so as not to unwind).
• Pull back one bubble and twist with a lock.
• Make three more twists of the same size and twist with a lock so that a loop is obtained - these are the legs of the poodle.
• Twist 4 more bubbles.
• Pull back one bubble, make the lock again.
• It turned out to be a dog, but inverted, it remains to unfold the muzzle and raise the tail up - the figure is ready.

If you put the ears down and lengthen the body a little, you get a dachshund.

Flowers

Making a flower from long balls is a little more difficult. Three balls are required here:

• Shade of petals: red, pink, orange, white, etc.;
• The color of the stem and leaf is usually green, but you can experiment;
• Flower center color: yellow or orange.

It is better to start creating a flower with petals.

• Inflate a bright ball with a pump, leave a tail 3-4 cm in size, tie the hole with a knot.
• Close the beginning of the ball and its end - connect them to make a circle.
• Fold the circle in half and twist three pairs of bubbles so that it resembles a double row of tied sausages.
• Now you need to fold this bundle with an accordion, as shown in diagram 5-6.
• Squeeze in the middle with your fingers and twist into a total twist, you get 6 petals.
• You can proceed to the stem, inflate the entire green balloon with a pump, but do not make it too dense, because there will be two more leaves on the stem.
• About 10 cm should be retreated from the knotted knot and twisted, and then the resulting twist should be bent in half and twisted again, so that a double twist is obtained.
• You can insert the resulting twists of the stem into the petals, or you can inflate a yellow ball (or another color) and make a core out of it, having previously cut off the excess part after twisting.

A round ball is also suitable for the core, if it is also not fully inflated, and fastened with a regular knot to the stem.

• To create leaves on the stem, it is enough to twist with a bend and align the resulting leaves - the flower is ready.

Bouquets of airy flowers look more impressive, they are large enough, so 5-7 such flowers, tied with a beautiful wide ribbon, are enough for the holiday.

If you leave the petals at the accordion stage, as in Scheme 6 of Figure 4, and then link them to the stem, you get charming tulips that can be presented on March 8th.

Now there are many variations on how to make flowers from long balls, there are different schemes and methods that are not available to every beginner, but you can easily make charming lotuses, or water lilies that will look spectacular in water or on a table.

So, in order to create a beautiful lotus, you will need:

• Two balls of pink / white / red or other colors - for the petals;
• One ball yellow color for the core;
• One ball of dark green hue;
• Pump and scissors.

Before inflating the balls, you need to knead and pull them a little, because there are many twists for the lotus.

Little animals

If you get a dog, you get other animals. The technique of twisting a figure into a giraffe is very similar to modeling a dog, there are some differences:

• When making a giraffe, the head needs to be modeled smaller, and only 2-3 cm should be left on the muzzle;
• After the muzzle there will be not 5 twists, but 4;
• The giraffe's neck will be longer and this must be taken into account when twisting;
• The body will be shorter and the ponytail smaller.

It is not difficult to model a bunny, the technique is very similar to a dog. The bunny will need one balloon, a pump and a marker to complete the look.

• Inflate the balloon with a pump and leave about 8 cm of the ponytail not inflated.
• Twist the first bubble, 8 cm long - this is the head of a hare.
• Twist two more bubbles - these are bunny ears.
• Twist the next bubble, about 13 cm in size, repeat this action again.
• Connect the two ends of the chain of the two extreme twists into a lock.
• Twist the next bubble only 2-3 cm long - this will be the neck of the animal.
• Further twisting will be performed for the front legs of the hare: twist the bubble about 5 cm, the next 2-3 cm, the next the same 2-3 cm, and another 5 cm.
• Connect a chain of the last 4 twists into a single lock - the front legs are done.
• Twisting a 5 cm bubble is the body of the animal.
• It remains to twist the bubbles for the hind legs: make a twist 15 cm long and connect both ends into a lock.
• Another bubble is a small ponytail.

To complete the modeling of the bunny, it remains only to turn all parts of the body into place, collecting a hare in the figure. For complete completion, you can paint on the eyes, nose and antennae - the bunny is ready.

It is also not particularly difficult to make a tiger or a cat. The modeling scheme for these animals is the same, but the colors change.

• Inflate the ball with a pump, leave the tail 13-14 cm unfilled with air, remove it from the pump and tie the hole into a knot. There will be 11 twisted bubbles in total.
• Twist 7 small bubbles holding with your hands.
• Between the 2nd and 3rd twists, make another one, between 4 and 6 the same.

Modeling the forehead, jaw, ears and cheeks of a tiger / cat:

• Take the first bubble and stick the tiger's face inside, holding it from the outside, wrap this bubble between the 8th and 9th bubble - the nose and mouth of the tiger will appear, and the 4th and 6th bubbles are the ears.
• The body and legs of the animal are modeled together. Tie the ends of the ball with a double knot and divide in half, there will be two bubbles - these are the hind legs.

The resulting figure of long balls will look more like a tiger if you add a marker to the image: draw eyes, nose, mustache and characteristic stripes.

A cat is modeled using the same technique, only the colors will be different.

Birds

From long balls you can make anything and anyone, including birds. Swans are especially common. To model from a swan, you only need one balloon, white or light yellow.

• Inflate the balloon with a pump and leave a small tail about 6 cm, it is needed for twisting and for the future beak of the bird.
• Form a ring from the larger part of the ball and hold with your fingers, bend the ring in half with the other hand.
• Twist each ring separately and thread one ring into another, form in the body of a bird.
• The rest is the neck and head and must be gently bent and held for a while for the ball to take shape.
• Finish the eyes of the swan and arrange the beak - the bird is ready.

Do not be afraid to twist, even if there are a lot of similar actions in the scheme, the balloon will not burst: firstly, there is room for air, secondly, the balloons are made of latex and have high elasticity, and thirdly, the balloon must be heated and stretched before inflating ...

Conclusion

As you can see, if there is a diagram and description, it is not difficult to make figures from long balloons. Gradually, from light shapes, you can move on to more complex modeling schemes, acquiring more and more skills in twisting and sleight of hand.

An incredible master of twisting lives in Japan, who creates whole masterpieces from balls, and after all, he also once started with dogs and flowers.

Download video and cut mp3 - it's easy with us!

Our site is a great tool for entertainment and relaxation! You can always view and download online videos, funny videos, hidden camera videos, feature films, documentaries, amateur and home videos, music videos, videos about football, sports, accidents and disasters, humor, music, cartoons, anime, TV series and many other videos are completely free and without registration. Convert this video to mp3 and other formats: mp3, aac, m4a, ogg, wma, mp4, 3gp, avi, flv, mpg and wmv. Online Radio is a selection of radio stations by country, style and quality. Online Jokes are popular jokes to choose from by style. Cutting mp3 into ringtones online. Converter video to mp3 and other formats. Online Television are popular TV channels to choose from. Broadcasting of TV channels is absolutely free in real time - broadcast online.

School assembly hall decoration To last call should consist of wall compositions, floor bouquets, and hanging decorations. So that balloons are everywhere - they perfectly fill the space and make the room solemn!

To make such a chain, you will need the following materials:

· Balloons 12 "/ 30cm Mother of Pearl WHITE 072 - 4pcs

· Balloons 5 "/ 13cm Mother of Pearl WHITE 072 - 16pcs

· Balloons 12 "Pastel YELLOW with 1 tbsp. Fig. Smile (silk) - 3pcs

Metallized turquoise polysilk - two lengths 70x70cm

Balloon tape - 7-10m

The total cost of this composition (excluding the cost of helium and fishing line - since the length of the fishing line you need depends on your particular room) will be 60 rubles.

Let's start by making some decorative weights for our composition. Take 5 '' white Balloons- you need four balls. First take two balloons and without inflating them, put one balloon in the other, then take two more balloons and also put one balloon in the other. Fill the inner balloons with water and tie the water-filled balloons together with the outer balloons one knot. So you got two weights, which now only need to be decorated.

To do this, take a piece of polysilk and wrap one weight in it, Secure the polysilk with a tape for balloons. Also decorate the second weight.

Next, let's make the collar blanks for our smiling balloons. To do this, you will also need 5 '' Balloons... Inflate with air all the remaining 5 '' balloons - 12 pieces. Tie the inflated balloons into a simple knot. Now tie pairs of balloons to each other by the tails. And twist the resulting pairs of balloons with each other in the center so that you have three bundles of four balloons in each.

Now it is necessary inflate balloons with helium: linkings (all three balloons) and balloons - smiles (all three balloons as well). Tie the inflated balloons on simple nodules... Now tie the balloons to each other in pairs by the tails - linkings and balloons - smilies. To do this, use the tail on the top of the balloon for linking balloons.

Next, for each figure obtained, you need to "put on" a collar of 5 '' balloons. To do this, take one bundle of four 5 "balloons, move two adjacent balloons apart, put the bundle on the linking and smiley bundle knot and twist those 5" Balloons, between which there was a knot of linking and smiley bundles.

Also "dress" the collars on the remaining two figures.

We just have to fix the balloons and figures on the fishing line. First, cut the length of the line you want. Attach the weights at both ends of the line, which we did at the very beginning. Next, tie balloons and figures to the fishing line one by one, alternating them with each other. To Balloons do not slip on the line, it is important to tie them using the tail of the balloons, and not the ribbon.

After tying all the balloons to the fishing line, tie their tails with small pieces of tape and curl the free ends of the balloon tape with scissors. Your compositions are ready!

As you can see, such a chain of balloons is very easy to make with your own hands - it does not take much time at all. And the fact that this composition is attached with just two attachment points, its rise and length depends only on the needs of the design - all this makes it universal. We are sure that you will find a place for her in your hall! And if you want to experiment with colors compositions and choose other designs of balloons, our balloons catalog!