How to make a paper airplane? How to make a paper plane Origami paper for beginners plane.

You can create a variety of toys and crafts with your own hands. Many of them will take 3-5 minutes to create a beautiful item or cute trinket that children can play with. A paper airplane is one of the options for such items. In this case, you can use your imagination to create not just a semblance of an aircraft, but a full-fledged volumetric layout. This will require paints, markers or pencils, or even drawings.

You can create a variety of toys and crafts with your own hands

Origami is not just a way to create cute crafts and funny paper toys, but a full-fledged art direction. The classic version of creation assumes that the airplane will be folded from a single sheet of special paper (you don't have to glue or cut anything). The creation scheme is simple: you need a rectangular sheet, which will be transformed into a nose (the front part of the future airplane), its body, wings and a tail will also be present. So, detailed instructions and folding scheme step by step:

Stages of work:

Put a sheet of origami paper on the table, fold it vertically in half;
Then the sheet will need to be expanded;
After that, you need to fold the two upper edges to the center of the sheet (do not unfold);
Fold the same corners again so that they connect, but do not intersect on the center line (do not unfold);
Bend the top sides down to the right and left;
Raise the left and right sides to form the wings.

The airplane is ready to fly.

Gallery: pictures of a paper plane (25 photos)

Airplane made of paper (video)

Large paper plane

You can create a large fighter plane from A4 paper... For children, it will become an interesting toy, for adults - a way to relax, show imagination. You will need to start work with preparing the site and paper (it can be plain white or colored, light office or cardboard).

Stages of creation:

Bend the sheet in half lengthwise;
Then bend it in half horizontally again;
Fold the corners so that they meet in the center;
Bend them up;
Starting at the middle of the fold, fold the side corners;
Unfold folded paper at the top;
Then unfold all corners;
After that, fold the upper part of the triangles in half, starting work from the lower corners;
The sides of the paper should be folded slightly towards the center;
After that, fold the sides to the middle of the sheet;
The side parts of the resulting rhombuses must be tucked so that a triangle is formed;
Then it should be folded in half vertically;
Tilt the craft to the left, bend a parallel line, retreating 1-2 cm;
The resulting wing folds down (right and left);
Then the moving part of the wing will need to be folded in the middle on each side.

You can create a large fighter plane from A4 paper

Such a toy will fly quickly and smoothly. An unusual option will allow you to come up with various situations and game moments for tricks.

How to fold a flying plane: a simple diagram for kids

It will be very interesting to fold your own paper toy for a child on your own. That is why it is important to choose an assembly scheme that he can easily reproduce. Flying paper airplane models will help him not only develop creativity, but also develop fine and gross motor skills.

It will be very interesting to fold your own paper toy for a child on your own.

In order to assemble your first plane, you will need to perform a few simple steps:

Take plain paper (you can use a notebook sheet);
Make a square out of it (fold the lower part and tear along the line);
Fold the resulting sheet in half;
Fold the upper edges to the center of the sheet;
Bend the resulting paper triangle;
The edges of the workpiece are folded back to the middle;
Then the sheet is bent in half and the corners are bent to form wings.

Such a sharp-nosed plane will fly very fast.

How to make a paper swallow

If the creation of a paper airplane does not interest the child, then you can invite him to fold the birds... A swallow is an easy option for such a craft.

To create it, follow these steps:

Take a regular sheet from a notebook;
Bend the upper left corner to the right towards the middle;
The rectangular part of the sheet formed at the bottom must be carefully torn off, but not thrown away, since this part will still be needed in the work;
Fold a square sheet diagonally (you should get 2 intersecting lines in the center;
The resulting paper pyramid should be folded in half so that a triangle is formed;
Its left corner must be bent up;
Do the same with the right corner;
The left side then needs to be bent down;
Repeat the operation with the right side;
The rectangular piece should be folded vertically in half (this is the tail);
Bend the upper left corner towards the center;
Repeat the action with the right corner;
Insert the piece into the middle of the main body of the craft.

If the creation of a paper airplane does not interest the child, then you can invite him to fold the birds

Bend the bow of the swallow.

Do-it-yourself cool military aircraft made of paper

Cool military models of flying equipment can be created in stages not only from plastic or wood, but also from such available materials as plasticine or paper.

You can easily make any kind of aircraft:

Bomber;
Fighter;
Space;
Supersonic.

Cool military models of flying equipment can be created not only from plastic or wood

In order to make the figures as realistic as possible, you will need to use several colors of paper or felt-tip pens to color them.

For a bomber you will need:

Rectangular sheet of paper (A4);
Its upper corners need to be bent towards the center;
Then unbend them, outline a line next to them in order to bend the corners towards them;
After that, bend and unbend the corners on both sides;
Fold the resulting figure in half;
Draw a line on the side in the center, bend the edge towards it (on each side);
Fold back part of the corner on each side;
Bend upwards also on each side;
Turn the workpiece over, then bend on each side of the edge to the center.

Bend the corners and fold in half. Bend the wings of the plane in front and behind.

How to make an airplane out of paper

What paper is an airplane made of? To create a paper airplane, you need colored or white paper. It is important to choose for work one that would not be too heavy, since in this case the craft will be able to fly quite smoothly and quickly. For even more realism, you can draw certain details of the airplane.

For work you will need:

Take a sheet of paper of medium density;
Fold it in half, then unfold;
Bend the corner towards the center to form a square;
Tear off (carefully) the lower part of the sheet - do not throw it away;
Bend the upper corner in half (you get a triangle);
Expand the resulting shape and bend the bottom corner up (one);
Bend the upper corner to the center of the craft so that it goes beyond it .;
Then fold part of the corner (side) in half;
After that, bend the corner up and to the side;
Do the same with the second corner of the future airplane;
Expand the figure, bend the upper corner inward (nose);
After that, bend out the uppermost part of it;
Unfold wings.

The airplane is ready to fly. You can supplement the model by gluing the torn part of the sheet folded in three in half to it in the middle.

Airplane with a catapult (video)

Thus, paper airplanes are not limited to simple models. The existing schemes, supplemented by imagination, will make it possible to create a real air fleet of paper: passenger and military, fighter and glider. Bright and varied models are obtained from colored paper, crafts intended for interior decoration, for example, in a nursery - from cardboard.

Many made them in childhood and were happy to launch them at home or on the street. If the model is folded correctly, then it can fly several meters and smoothly descend to the ground.

There is nothing tricky or complicated in making paper airplanes. The main thing is accuracy, attentiveness and a desire to master the art of origami. There are many options for children and adults. Let's stop today at three. This is enough to learn how to make airplanes and send them flying.

Origami paper airplanes - three models

Let's remember how a classic paper airplane is folded, or let's learn for the first time. To do this, take a rectangular or square piece of paper. Fold it in half along a vertical line and straighten it again.

Fold the top side corners towards the center so that they converge to form a triangle. Point it upside down. Fold the sides towards the center again. They must be symmetrically positioned. Fold the tip up to lock them in place.

Fold the craft in half along the longitudinal line. Fold back the wings. A simple origami airplane is ready.

Wide nose model

Let's try to slightly change the assembly method and get a new type of airplane. Let's start in the same way as in the previous time, outlining the central vertical line and bending the upper corners towards it.

Flip the workpiece over and fold to the center again. Bend the particles of the parts to the outer surface to form a rhombus at the top.

Fold the shape in half from top to bottom. Fold the plane in half along the center longitudinal line and form the wings on the sides. He is ready to fly.

Complicated model

The latter option is also simple to execute and differs from the first two in more complex wings and tail. Start as you did the previous time, bending the top corners of the rectangle towards the center. Repeat the action again, directing the same sides to the middle of the sheet.

Fold the workpiece along the longitudinal line inward. Mark the right angle of the resulting triangle in different directions along the oblique. Bend the section inward along the intended fold to form a tail protruding from above.

Bend the wings on both sides and bend their edges upwards. Move the sharp end of the bow inward. That's all.

You can also try to collect origami or any of the three proposed models. It will definitely not be boring!

Hello dear masters and craftswomen. I present to your attention a master class on making such an origami swan, and I called it "The Swan in Pink". How to origami a swan? We will make a pink drawing, select the swan with pink modules around the perimeter and put it on a round stand, and also glue small eyes. Please watch this video on how to make an origami swan. V […]

Hello dear masters and craftswomen! Today I bring to your attention a master class on making a tricolor Swan from triangular modules. It seems that what else you can think of, what other options are there for making Swans using the modular origami technique. But it turns out that there are still options and this is not the last thing in my arsenal. The tricolor swan is so simple [...]

Hello dear masters and craftswomen! I bring to your attention a new master class on making a Swan in black from 3D modules. In the last lesson, you and I did the Swan in red, and now I decided to change the style a little and perform the Swan in black. The scheme is not complicated and will suit anyone, even a beginner in modular origami. Specially […]

Hello dear masters and craftswomen! I bring to your attention a new master class on making a Swan in red shades. On the Internet, you can meet a huge number of different schemes and master classes for making Swans using the modular origami technique. I’m sure you haven’t seen such a swan before. This scheme is quite simple and even [...]

Swan in blue. Video tutorials and diagram. Part 3. In the third part of the master class, I offer you two video tutorials and a detailed origami diagram of how to make a swan. The first video talks about how to make a swan neck and how to make a small stand. The second video talks about how to glue the swan better and faster. Lesson 6 (neck and [...]

Swan in blue. Video tutorials and diagram. Part 2. In the second part of the Swans in Blue Mater-class, we finish making the torso. I have prepared for you two video tutorials and a detailed scheme of the origami swan from the modules. To assemble a swan, you will need 1438 1/16 modules, of which: 317 - purple modules 471 - blue modules 552 - blue [...]

Swan in blue. Video tutorials and diagram. Part 1. I would like to bring to your attention a new master class on making an origami swan out of paper from 3D origami modules. The layout is rather unusual and the wing look is not quite classic. In the photo, you can see small through holes and a mesh pattern. Frankly, the scheme is quite complicated! Especially for this scheme, I [...]

“Rainbow Swan” diagram and video tutorials (part 3). The third part of the "Rainbow Swan" master class consists of three video tutorials on assembling the stand. And I also decided that the video tutorial on gluing "Rainbow Swan" will be very useful to you. Lesson 5 (support part 1) Lesson 6 (support part 2) Lesson 7 (support part 3) [...]

Hi guys! In this article, we'll talk about how to do paper plane for 100 meters of flight ... Generally speaking, almost any plane can fly far enough - it all depends on the altitude from which it was launched. The design features of paper airplanes affect their ability to glide. So an airplane that can plan for a long time will fly very long and far from a height, for example, the 16th floor. The wind will additionally help speed up and extend the flight of such a paper craft. Let's start our ranking of the most far flying planes.

5th place - the simplest paper airplane models

At this place are located all the simple models of airplanes that even a child can assemble and which we all collected in lessons and let girls and teachers. For such tasks, ordinary blunt-nosed aircraft and gliders are quite suitable. Here are 10 of the best easy-to-build paper airplanes.

This is the simplest and most popular paper airplane - almost all people know it, because they have been collecting it since childhood.

The next aircraft model has a fast and steady flight. Front support wings keep the nose from drooping, providing stability, lift and long flight.

The next will be a blunt-nosed aircraft with increased resistance to collisions.

The fifth will be to assemble a modified plane with a blunt nose. The scheme is simple, but requires careful assembly.

Now I propose to build a good airplane out of paper with nose fenders and vertical rear stabilizers. The wing shape of such a glider allows it to fly in a straight line for longer.

The next plane has a sharp nose and flies forward rapidly. The fins on the wings stabilize and prolong the flight of such a paper fighter.

The following scheme has good piercing abilities - the craft turns out to be similar to a space fighter. It seems that he was created to exterminate the enemy's manpower.

The largest wings are possessed by a glider, which has a rather ridiculous appearance. But this does not prevent him from flying for a very long time and far.

The amazing design of this airplane makes it look like a space shuttle or a Boeing. He flies not far, but effectively.

4th place - paper plane "Albatross"

We fold a sheet of A4 paper in half and run it with a fingernail so that the fold is perfect.

We fold the edges of the paper inward to the central axis.

After that, bend the edges with an obtuse angle again towards the center. The edges of the paper should lie symmetrically on the central axis of our craft.

Then we bend the nose of the paper airplane towards the tail and combine the centers of symmetry.

Add folds to the corners so that the side on the left is parallel to the side on the right.

We unbend it back and bend the sharp nose of the aircraft back along the flight path. Iron all seams with nails.

We bend the wings so that a large area of the wings remains bearing. We do everything as symmetrically as possible so that the plane continues to fly.

At the end we form a tail. In principle, the tail can be folded as in the photo of any size.

Straighten the resulting folds up so that it is in the space between the wings.

We bend the vertical stabilizers up parallel to the main axis of symmetry of the paper airplane. This is the kind of plane we got - try to launch it rather.

If you still have any questions about the assembly of this aircraft, then watch the detailed video with comments.

3rd place - a scheme of an airplane made of paper "Yastreb"

Now we are going to assemble another complex plane.

First step. We bend the sheet in half exactly in the middle. The quality of the flight will depend on the evenness of the folds. All stages of the plane are made mirrored - left and right.

Second step. Bend the left and right sides to the center.

The third step - once again take the left and right edges of the paper and fold it to the central axis of the plane.

The fourth step is to bend the sharp end of the workpiece towards the tail. In this case, the fold line of the sheet should pass through the intersection of the edges in the middle of the paper craft. Centering is checked by matching the center bend along the long side of the sheet.

Fifth step. Bend the edges of the paper on the left and right to the center again, as in the photo. It is important here that the inner layer of the paper does not bend or wrinkle.

Sixth step. We grab the outer fold and open it, and then wrap it inward as shown in the photo. We also act on the other side of the plane. We take the formed pockets and bend them inside out.

Seventh step. The pointed nose should be bent in the opposite direction about 1 cm deeper than the logical fold line. Pockets are formed there, which we bend inside the nose from about the middle.

Step eight. We also wrap the tip opposite the sharp nose.

Ninth step. Bend paper airplane wings parallel to the keel. If the wings of your paper craft match, then the base of the plane is assembled symmetrically.

Tenth step. Bend the edges of the wings parallel to the main axis of symmetry to form the flaps. The plane is ready.

A detailed video on assembling such an aircraft with your own hands from paper is given below.

2nd place - a diagram of an airplane made of paper "Thunderstorm"

We will continue to assemble a paper plane that will fly for a long time according to a highly complex assembly scheme. We will need, as always, a sheet of A4 paper. It can be plain white or colored paper. You can also take sheets from magazines with medium-weight paper.

The first step is to fold the sheet in half. We remind you - from how smoothly and symmetrically your plane is assembled, it will fly in exactly the same way. After folding the sheet in half, unbend it and then move on to the second step.

The second step is to bend the corners to the center - on one side and on the other. It turns out such a blank.

Third step. We bend the edges of the paper that formed an obtuse angle from the left to the right again along the line of the plane's nose to the right corners of the paper blank. See how it looks in the photo. Straighten the folds of the paper near the nose especially carefully so that everything is symmetrical.

Fourth step. We see a point at the intersection of the curves of the left and right edges of the workpiece. Along the line through this point, you need to fold the airplane in half, as shown in the photo. You can check yourself by the coincidence of the lines of the central fold. After folding, unbend, turn over and bend in the opposite direction.

Fifth step. Flip the plane over again and fold the left and right sides to the edge of the inner sheet. For more details, see the photo and video.

Then flip the plane over again and bend the nose forward again.

Turn it over again and turn the strip of curled paper to the tail of the aircraft blank.

Sixth step. We bend the plane along the central longitudinal axis. It is convenient to bend the stabilizers on the wings in this position, parallel to one side and the other.

Seventh step. We bend the wings to the base. Here you can bend in different ways and experiment, but it is considered optimal - bending from the nose to the wing liners.

Everything should converge exactly and be symmetrical. Then the paper plane will fly exactly 100 meters or more and not fall to the left or right.

If the plane will fly down, then you need to bend the back of the wings slightly upward. Thus, the flow of oncoming air will lower the tail of the aircraft, and lift the nose up.

1st place - a scheme of an airplane made of paper "Sokol"

This is probably one of the most beautiful paper airplanes that you can make with your own hands, because it looks very much like a real one. To fold such a long-flying plane with your own hands, follow the detailed instructions with photos and videos at the end.

1 - we take a sheet of medium-density A4 paper and fold the sheet in half to get an airplane out of paper.

2 - bend a sheet of paper in half for the longest flying paper airplane.

3 - we break the paper around the edges to make a cool plane with our own hands.

4 - we bend the second side also at the airplane from a sheet of paper.

5 - iron the resulting paper plane corners in half again.

Many of us (yes, almost all!) Folded paper airplanes as children. But until now, not all moms and dads know that they were doing aerogs, one of the origami branches. In Japanese, by the way, it will not be aerogami at all, but kami hikoki - kami = paper, hikoki = airplane. So today we present to you 12 of the most popular models of kami hikoki - paper airplanes that are ready to bravely dissect the vastness of the air ocean and, undoubtedly, will delight your children!