Undoubtedly, many people love balloons, they cause delight and good moodBut somehow the air figures of them are particularly watching. The celebration looks more elegant and colorful, and impressions from him are unforgettable.

Over time, such a direction appeared as twisting - from the English word "twist", which is the modeling of air figures from special balls created precisely for these purposes.

It will learn to twist the balls and create air figures really, you just need to be patient, durable balls and a special pump. Figures from balls can become a decoration of the holiday, a gift or simple décor in the room. Especially interesting will be to study the art of tweetting with children: the process itself will teach the perfection, patience and accuracy, and the result will certainly reap the child.

What will be needed for tweeting

Start follows from the selection of basic materials that will be needed in learning twisting and creating figures from long balls. To begin with, only a few items will be required, and after purchasing certain skills, the kit may increase:

• Long balloons or shdm (for modeling balls). To the choice of balls you need to come seriously, since the quality and strength of the figure depends on it.
• The piston two-way pump is an important tool in working with long balls, because the durable balls to inflate without a manual pump is almost impossible. Sometimes the pump is sold in a set with shdm.
• Scissors, marker and other auxiliary items.

Before inflating long ball.It is recommended to reveal it a little - stretch several times with hands for heating the latex material, then it will be much easier to work with the ball.

Rules of strong figures from long balls

After heating, the ball needs to stretch in length and put on the hole on the tip of the pump. Inflating the balls is leisurely and evenly. Be sure to leave a small tail so that the air goes there and when twisting the ball did not burst, as a rule, it is about 10 cm. The thickness of the ball depends on the type of shape, it is possible to focus in phased instructions.

As soon as the ball reaches the desired length and width, it must be carefully removed from the pump and tighten the tip of the knot. Threads for shdm are not suitable.

An important rule is strong figure: twist it only in one direction, for example clockwise. Be sure to hold the twisted places with your fingers, since at any moment the figure can spin and the time spent on it will pass in vain.

Types of twisting

To get an aerial figurine in the form of a animal or flower, a long inflated ball twisted into bubbles different lengthsand then connects to the castle. Depending on the type of figure, the following types of twisting are distinguished:

• Normal twist - twist the small bubble on the ball. The size of the bubble is determined and is compressed by hand at this distance, then twisted in one direction about 3-4 times. Subsequent bubbles are twisted into the same direction.
• Twisting with lock- fixing the 3-contract walking bubbles into a concrete figure. There are 2 extreme bubble in the place of their compound, then twisted around with the following place in the same place 3-4 times.
• Twisting with lock (one more way). Two bubbles are twisted and the ball bends in the place of the last twist, the working part is compressed and the next bubble is planned and only then twisted together.
• Twisting with a bend- fixing the three consecutive bubble in the figure, where two extremes are not twisted, but simply bent. A bubble twisted, the ball is driving and twisted 2-3 times.

Types of twisting can be worked on the balls to a crime to tweetting to gain the skill of hand agility. When the twisting technique is worked out in practice, understand the instructions for the formation of figures and follow it will be much easier.

Figures of long balloons

Some air figures do not be difficult, you only need to adhere to step-by-step instructions. Also, each figure has its own characteristics, so carefulness is required - it is not possible to do not immediately, but do not despair, tweetting loves perseverance.

Doggy

The most common figure of long balls is a poodle. Make a dog is not difficult, sticking to the following instructions:

• Pump the ball with the help of the pump and leave not an inflated part of about 8 cm.
• Make three bubbles about 4 cm in size, the first is a poodle face, fix it with your fingers (so as not to be promoted).
• Retreat one bubble and twist the lock.
• Make three more identical to the size of a twist and twist the lock so that the loop come out is the feet of the poodle.
• Twist another 4 bubble.
• Retreat one bubble, make a castle again.
• It turned out a dog, but inverted, it remains to turn the face and raise up the tail - the figure is ready.

If you lower the ears down, and the body to lengthen a little - it will turn out to be a dachshund.

Flowers

Make a flower from long balls is a little harder. Here are already three balls:

• Tint of petals: red, pink, orange, white, etc.;
• The color of the stem and leaf, as a rule, choose green, but can be experimenting;
• Color middle of a flower: yellow or orange.

Start creating a flower better with petals.

• Inflate a bright bulb pump, leave a tail of 3-4 cm in size, tie a hole with a knot.
• Click the beginning of the ball and its end - to tie them to get a circle.
• Folded the circle in half and twist three pairs of bubbles, so that it resembled a double row of related sausages.
• Now you need to fold this bunch of harmonica, as shown in Scheme 5-6.
• Complete with your fingers in the middle and twist into a common twist, it will turn out 6 petals.
• You can proceed with the stalk, inflate the entire green ball with the pump, but not to do it too tight, because there will be two more leafs on the stem.
• From the knotted nodule, it is necessary to retreat about 10 cm and twist, and then the resulting twist bend ingredients and twisted again, so that a double twist is.
• You can insert the resulting twists of the stem in the petals, and you can inflate the yellow ball (or other color) and make the core from it, having finished the extra part after the twist.

A round ball is suitable for the core, if it is not completely inflated, and consolidate the usual knot to the stalk.

• To create leaves on the stem, it is enough to twist with the inflection and align the resulting leaves - the flower is ready.

Bouquets of air colors are more effectively looking, they are quite large, so it is enough for the holiday 5-7 such flowers tied up with a beautiful wide ribbon.

If you leave the petals at the harmonica stage, as in the diagram 6 of Figure 4, and then tighten with the stem - the charming tulips are obtained, which can be donated on March 8.

Now there are many variations how to make flowers from long balls, there are different schemes and methods that are not available not every newcomer, but you can easily make charming lotuses, or water jugs that will spectacle look in water or on the table.

So, in order to create a wonderful lotus, you will need:

• Two pink / white / red balls or other colors - for petals;
• One ball yellow color for core;
• One dark green shade ball;
• Pump and scissors.

Before inflating the balls, they need to be understood a little and pull, because there is a lot of scrubs for the lotus.

Zverushki.

If the dog turned out, there will be other animals. The technique of twisting shape in the giraffe is very similar to the modeling of a dog, there are some differences:

• Doing the giraffe, you need to simulate the smaller, and leave only 2-3 cm on the muzzle;
• After the face there will be not 5 scrubs, but 4;
• The neck of the giraffe will be longer and it is necessary to take into account when twisting;
• The body will turn into shorter, and the tail is less.

It is not difficult to simulate and bunny, the technique is very similar to a dog. For a bunny, one ball, pump and marker, will be required to complete the image.

• Inflate the ball with the pump and leave about 8 cm not an inflated tail.
• Twist the first bubble, a long 8 cm is a hare's head.
• Two more bubble twist is the bunny ears.
• Twist the next bubble, about 13 cm, repeat this action again.
• Connect two end of the chain of two extreme twists into the lock.
• Twist the next bubble for only 2-3 cm long - it will be the neck of the animal.
• Further twisting will be performed for the front paws of the hare: twist the bubble about 5 cm, the following 2-3 cm, the following is as 2-3 cm, and one more - 5 cm.
• Connect the chain from the last 4-twists into a single lock - the front paws are made.
• Twit a bubble in size of 5 cm is the animal torso.
• It remains to twist bubbles for the rear legs: to make a twist of 15 cm long and connect both ends into the lock.
• Another bubble is a small tail.

To complete the modeling of the bunny remains only to deploy all parts of the body into its places, collecting a hare in the figure. For complete completion, you can draw eyes, nose and mustache - bunny ready.

It is also not particularly difficult to make a tiger or a cat. The simulation scheme in these animals is one, and the color changes.

• Inflate the ball with the pump, leave the tail, unfilled by air 13-14 cm, remove from the pump and tie a hole in the nodule. There will be 11 twisted bubbles.
• Twist 7 small bubbles holding hands.
• Between 2 and the 3rd twist to make one more, between 4 and 6 the same.

Simulation of forehead, jaw, ears and tiger cheeks / cats:

• Take the first bubble and inspire the tiigrine muzzle inside, holding it from the outside, wrap this bubble between 8 and the 9th bubble - the nose and mouth tiger will appear, and the 4th and 6th bubbles are ears.
• The body and the paws of the animal is modeled together. Tie the ends of the ball with a double knot and divide the pressure, two bubbles will remain - these are the rear legs.

The resulting figure of long balls will look more like a tiger if the marker is supplementing the image: draw eyes, nose, mustache and characteristic stripes.

On the same technique, a cat is simulated, only the color will be different.

Birds

From long balls you can do anything and anyone, including birds. Swans are particularly common. To simulate from the swan, you need only one ball, white or light yellow.

• To inflate the ball with the pump and leave a small tail about 6 cm, it is needed for twisting and for the future of the beak of the bird.
• Shape a ring of most of the ball and hold your fingers, bend the ring in the other hand.
• Twist each ring separately and put one ring to another, to form in the body torso.
• The remaining part is the neck and head, it must be gently bend and hold for a while so that the ball takes shape.
• Take the swan of eyes and arrange a keyboard - the bird is ready.

You should not be afraid to twist, even if there are a lot of similar actions in the scheme, the ball will not burst: first, there is a place for air, secondly, the balls are made of latex and have high elasticity, and in the third - before inflating the ball must be heated and stretching .

Conclusion

As can be seen, if there is a scheme and description, make figures from air long balls is not difficult. Gradually, from light figures, you can move to more complex modeling schemes, purchasing more and more skills of twisting and agility of hands.

In Japan, there is an incredible tweeting master who creates entire masterpieces from the balls, and he also started with dogs and floweries once.

Ways of design of premises with balloons A lot, and new ones are constantly. For example, now in our online store you can buy chains from balls filled with helium! It turns out a decoration similar to the arch, although the principle of its manufacture is different.

Here the balls are tied to a special tape. And since they are filled with helium, ribbon rises, forming the arch. It looks very nice and unusual, especially since the colors of the ribbon and the balls themselves, as well as their form, can be whatever, so you can come up with a lot of cool decorative elements for any holiday!

We can buy inexpensive chains from balloons

We try to distinguish between our competitors, so we offer you good prices for chains from the balls, which you can watch on this page. Here are several product options, and you can:

• Choose one of the most likers, specify the colors that we use in the manufacture of the composition, and other attributes, and send the goods to the basket;
• Call us or leave an application for a callback, and on the phone to order your own option if you did not find anything like the catalog.

What are the chains from balloons?

In fact, it can be absolutely anyhow, because there are weights of the balls! For example, we use both ordinary latex and foils, as well as linked balls (or Lanking) - they have "tails" on both sides, which allows you to bind them different ways. A variety of and very colorful compositions are obtained.

At the same time, there can be a distance between the products, simply tie them to the tape, and it is possible not to leave (it turns out when using Lincolunov). You can additionally decorate the resulting army mini-compositions from small balls and balls-shdm.

We are waiting for orders on the chains of helium balls!

Leave an order through the site around the clock and daily, or by phone in the clock specified in the "Contacts" section. By ordering a callback, do not worry, you don't have to wait long - we will call back within a few minutes.

You can pick up the purchase yourself, and if it is inconvenient, then order delivery that can be done at any time of the day! The cost and delivery options can be found in the relevant section.

We hope that you will enjoy our range, and we are waiting for you in the ranks of our regular customers!

Registration of the assembly hall of the school to last call It should also be from wall-mounted compositions, and from outdoor bouquets, and from suspended decorations. So that the balloons were everywhere - they are perfectly filled with space and make the room solemn!

For the manufacture of such a chain, you will need the following materials:

· balloons 12 "/ 30cm Pearlmut White 072 - 4pcs

· balloons 5 "/ 13cm Pearl White 072 - 16pcs

· balloons 12 "Pastel Yellow with 1st. Fig. Smile (Silk) - 3pcs

· Metallized turquoise polysilk - two segments 70x70cm

· Balloons tape - 7-10m

In total, the cost of this composition (excluding the cost of helium and fishing line - because the length of the fishing line you need depends on your particular room) will be 60 rubles.

Let's start with the fact that we will make decorative weights for our composition. Take 5 '' White balloons - You will need four balls. First, take two balloons and implant them to put one balloon in another, then take two more balloons and also put one balloon in another. Internal balloons fill with water and tie the balloons filled with water together with the external balloons on one knot. So you had two shipboars, which now need to decorate.

To do this, take a segment of the polysilka and wrap one weight in it, secure the polysilk using a ribbon for balloons. Also re-organize the second ship.

Next, let's make the workpiece of "collar" for our smiling balloons. To do this, you will also need 5 '' balloons. Inflate the air all the remaining 5 '' balloons - 12 pieces. Inflatable balloons typing on a simple knot. Now tie pairs of balloons with each other for the tails. And the resulting pairs of balloons twist with each other in the center so that you have three bundles of four balloons in each.

Now it is necessary piece helium balloons: Linking (all three balls) and balloons - smiles (just all three balls). Inflated balloons Tie to simple nodules. Now tie with each other in pairs per tail balloons - linking And balloons - smiles. For this, balloons - Linking, use the tail on the top of the ball.

Next, the collar from 5 'ball balloons should be used for each figure. To do this, take one bundle of four 5 "balloons, spread two adjacent balloons, put a bundle on the knot of ligaments of Linking and smile and twist together several times those 5" balloonsBegging the nodules of Linking and Smile's bundles.

Also "Daine" collars for the remaining two figures.

We can only fix balloons and figures on the fishing line. First cut the length of the fishing length you need. From both ends of the fishing line, secure the weights that we did at the very beginning. Next, tie the balloons and figures to the fishing line, alternating them with each other. In order to balloons They did not slip on the fishing line, it is important to tie them using the tail of balloons, and not a tape.

Tied all balloons to the fishing balloons, tie their tails with small cuts of ribbons and free ends of the ribbon for balloons. Covered with scissors. Your composition is ready!

As you can see, such a chain of balloons is very easy to make with their own hands - it does not take much time at all. And the fact that this composition is attached in just two points of attachment, its rise and length depends only on the needs of the design - all this makes it universal. We are sure that you will find her place in your hall! And if you want to experiment with the colors of the composition and pick up other balloons designs, our will help you catalog of balloons!

You will need:

Instruments

Before starting to make a variety of models and figures, you need to choose high-quality and durable balls - this is one of the most important moments in our business with you!

A two-way pump will be required. Among important additional tools that may also be useful - scissors, a small tube tube and a marker.

Also, before start working with a ball (inflated, twist, tie), it needs to be temporarily untied.

Stretch it with your hands several times so that Latex warms a little. As a result, pumping will be much easier.

Inflation, as usual, through the neck. The tail remains, so that air passed there when twisting. The length of the main part depends on what figure is going to do.

Dog Poodle

This is the most popular tweeting variety. At one time, such a choice was called a "hosharik".

1. After the ball pumped down, we make one twist on it - it will be a fruit.
2. The first bubble is fixed with your fingers, on average its size is 3-4 cm.
3. Further make 5 identical bubbles that will be used to make a muzzle. As a result, in the initial part we will have a certain chain of 5 bubbles. We fold them between themselves and twist separately, about 3 times. It turned out a face of animals.
4. Next should make legs. But do not forget to leave 12-13 cm for the future neck.
5. We twist the ball in such a way that in about the center there is a bubble, in other words - sausage.
6. We fold it twice vertically, add both parts and twist them with each other.
7. The front paws are already there. Now only the place remains from which they will make the hind limbs and tail.
8. We fold the ball in half, follow the proportion and twist the back.

Giraffe with their own hands

We repeat almost the same actions that we described in the previous version. But in this case, the head will be a little less.

Here we leave about 2-3 cm on the muzzle, and we design it from 5, as it was in the case of peeling, but from 4 bubbles-sausages.

We make the neck longer, respectively and legs. As a result, it will turn out a short body and tail.

Swan: master class

1. We use most of the ball and make a ring from it.
2. Then we take the remaining part for another ring, but now a little less, leaving a little place for the neck and head.
3. The second ring, which is smaller, pressed in the first.
4. Then create a head and neck - it will be something average between those actions that we conducted earlier, making a dog and a giraffe.

You can draw eyes - for a more spectacular and plausible species. A regular marker is suitable for this.

Performing many actions with twisting and tying, you should not be afraid. The ball is durable and calmly will withstand a similar load.

Bunny from sausage balls

Making a snake

How to make a tiger / leopard

On average, we should get 11 pumeres or sausages.

And bubbles 4 and 6 will become the ears of the future animal. Next, create a torso and legs along the already familiar scheme. The ball ends should be tied to a double knot and divide in half.

3. Folded in half the ball twists at the ends. It turns out three compartments. One with a loop and one with each edge.

1. Inflate the "sausage" ball, leaving 15-20 cm, and tie a nodule.
2. Start from the dog's head with a nodder. Two bubble twist. The last two connect the twist together - it will be ears.
3. Make a 2.5-centimeter neck and, after it, followed by the head with the ears twist the front legs.
4. Make, about a 10-centimeter body, and behind it is the hind legs.
5. Leave a small ball with air at the base of the tail. And the rest of the air is chonite to the end of the tail.

How to inflate the animal ball?

Chief Principle - Inflatte top down.

How to make the eye tiger stages on balloon?

The easiest way is to draw a marker or felt-tip pen.

How to make a realistic muzzle bunny from shdm?

Fill one ball, make the end of the knot. Determine the middle of the ball and fold twice. Twist to form a loop, and this loop, in turn, divide half and twist to form a bow. Loose bay ends fold together, back up the length of the index finger and twist.

How to make an ear from the ball?

Take about 4 cm, slightly releaseing air from it. Twist. Then take a bubble about 3 cm, also releaseing a little air from the bubble. Twist. Connect both ends from the bubble and twist together. In this place the bubble acquires the shape of the ear.

How to make the figure from the balls stood?

It is necessary to just bind some kind of heavy item that will hold the figure.

How to make a swan neck from the ball?

1. Twist the first soft bubble with a length of 2-3 cm. This bubble supports the neck of the swan in the specified position.
2. Connect both ends of the first bubble into one lock.
3. Twit a second bubble with a length of about 30 cm.
4. Connect both ends of the second bubble into one lock.
5. Twisting the third bubble with a length of about 20 cm.
6. Connect both end of the third bubble into one lock.
7. Push and secure the third bubble through the loop from the second bubble (photo 8-9). The balance of the ball will be the fourth bubble, it is the head and neck of the swan. Bend the fourth bubble to give a swan neck shape. The blurred part will be the beak. Draw your eyes with felt-tip pen.

Download video and cut MP3 - we just have it!

Our site is an excellent tool for entertainment and relaxation! You can always view and download online video, video jokes, video hidden cameras, feature films, documentaries, amateur and home video, music videos, video about football, sports, accidents and disasters, humor, music, cartoons, anime, serials And many other video are completely free and without registration. Convert this video to mp3 and other formats: MP3, AAC, M4A, OGG, WMA, MP4, 3GP, AVI, FLV, MPG and WMV. Online radio is a radio station to choose from country, styles and quality. Online jokes are popular jokes to choose from styles. Cut MP3 to ringtones online. Video Converter in MP3 and other formats. Online television is popular TV channels to choose from. The broadcasting of the TV channels is made absolutely free in real time - the ether online.