For many, they are an excuse to send a thing to the trash can. Owners of damaged clothes believe that it is better to spend money and buy a new wardrobe item than to be creative and patch up a misunderstanding.

But do not rush to throw away the thing, there is still a chance to give it a “second life”. Try hand darning or putting some interesting pretty patches on your jeans. This approach has undoubted advantages - by showing your creative abilities, you will not only get original, fashionable and updated trousers, but also save the budget, and also save the wardrobe from being cluttered with other things.

How to make a patch on jeans, read our article with a photo. Step-by-step algorithms will help even beginners and inexperienced to cope with the process quickly and accurately.

How to put a patch on jeans between your legs

Most often, scuffs and holes appear on the material between the legs. The zone is problematic, and it is not always possible to beautifully and appropriately decorate a torn area.

There are several options for how to sew a hole in jeans between the legs “jewelry”. For this task, you will need a patch, the torn trousers themselves, threads of the same color as the fabric, a sewing machine (if available), a needle, and scissors.

Advice: if you are unsure of your abilities, it is better to give the thing into the hands of specialists, for example, in an atelier. Masters know exactly how to fix jeans worn between the legs without ruining the product.

1. First of all, evaluate the scope of work. Cut off the protruding threads, only carefully - do not damage the main layer of the material.
2. As a patch, choose a dense fabric, similar in color to the jeans to which you are going to sew the material. Before starting the procedure, wash and iron the trousers in the worn area, try to avoid wrinkles and creases. The same should be done with the payment.
3. From the material prepared for the patch, cut a piece of the desired size that repeats the outline of the hole. Do not forget to leave an allowance of one - one and a half centimeters for a margin.
4. With the manual method, attach the patch to the place of the rupture or abrasion on the front side. The directions of the equity threads of the main fabric and the patch must match. Baste the patch using a thread with a needle, or pin with hairpins.
5. Stitch with small, neat stitches over the patch, moving along the edges.
6. Turn pants inside out. Sew stitches around the hole to secure the hem.
7. If you will be working on a sewing machine, then the patch must be applied from the wrong side of the product, placing it exactly above the hole and securing it with pins. In zigzag mode, sew the entire surface of the patch, laying the seams very close together and using the reverse sewing function. You can also treat the front side of the damaged area. It remains to fasten and cut the thread.

Advice: You can purchase an adhesive patch from a fabric store. This is a quick way to repair a hole or abrasion that has formed in the material, but the result will not be durable. After the first wash, such a patch will peel off, and you will have to buy a new one, or still sew up your pants.

Shtukovka - restoration of tissue structure

In case of careless tears, a patch on jeans between the legs may not always fit, or it will look unnatural, so it is necessary to resort to a decorative method in which the processing of the item at the site of damage will not be noticeable.

The most common variant of artistic darning is a piece. For its implementation, it is desirable to have sewing skills, since it is produced by machine.

1. Turn pants inside out. Align the edges of the hole, while cutting off the excess thread.
2. Glue along the slot doublerin, the size of which should be slightly larger than the hole. If the jeans are tight, then you need to baste a piece of thicker fabric.
3. Turn the product back on your face. Set the minimum stitch length to 1 or 1.5 mm. Start sewing lines through the glued gap, perpendicular to it, and very close to each other, back and forth.
4. When the entire length of the joint has been passed, the thread must be fixed and cut off.

Advice: so that the fabric does not become too stiff after stitching, the lines should be laid thicker in places of damage, and less often - where they are not really needed.

How to put a patch on your knee

This paragraph describes in detail how to sew up a hole in jeans on the knee. The problem is solved using several methods, the most popular of which is a patch. For female models, you can use colorful inserts or lace material. For menswear, it is recommended to stick to a more strict and classic decor.

You can darn a hole with your own hands by following this algorithm:

1. Overcast the patch around the entire edge with plain threads.
2. Then attach to the damaged area, and from the outside, using an overcast seam, fasten the decor element to the fabric.
3. Make small stitches, stick the needle from right to left over the top edge.

You can be creative and make your trousers even more fashionable and exclusive. Use pieces of leather as patches. You will need fabric for two knees.

1. First of all, decide on the size. It is best that the patch material covers the entire area of ​​the knee.
2. If it is difficult for you to cut out a patch by eye, then you can first make a sketch on paper, try it on, and then transfer it to the skin. Remember to leave half a centimeter for the hem.
3. Fold the resulting piece of fabric around the edges and patch it with a running stitch.
4. Now you can attach the skin to the leg - using a machine or manually.
5. Do the same work on the second leg.

Another unique and interesting way to “beat” the defects on jeans is to decorate them with lace fabric inserts. A tandem of rough jeans and thin lace as a result is incredibly spectacular and delicate. To bring the idea to life, you can take guipure of any shade, but white patches look best. They are much more elegant and attract more attention. The exception is black jeans - for him it is better to choose plain lace patterns.

Inserts with monograms should be sewn in the same way as regular additions - from the wrong side of the clothes. The only difference is that the edges of the torn place do not need to be swept away.

Advice: if a fabric patch is sewn on the front side of the trousers to mask holes and scuffs, then it will be more accurate if you pre-treat its edges with an overlock.

How to darn if there is no hole

We looked at the basic ways to patch jeans between your legs. The following describes a repair option for trousers without holes. For example, if a hard-to-remove stain or abrasion has formed on the product.

Inspect the damaged area first. It is necessary to determine where the defect is located - in the area of ​​\u200b\u200bthe seam or in the middle of the trousers. Depending on this, further processing will be carried out. If there is abrasion, then a hole may soon form, so such a site must be thoroughly “fixed”.

1. Pick up denim, matching the tone, pieces of material. You will also need gossamer tape or fabric glue. They can be found in specialty craft stores. Usually it is glued using an iron.
2. Attach a self-adhesive tape from the inside of the product to the place of damage, on it - a piece of fabric. Next, iron on the patch.
3. Sew along the edges of the patch using a sewing machine. This is done in order to keep her longer.
4. If the seam of the trousers is spreading, which is rare, then sew it on a typewriter, or manually connect it with a blind seam. This will strengthen the place of wear. Now the clothes can be worn for a few more months.

How to darn with a blind stitch

To sew two elements of fabric in such a way that the threads are not visible from the front side, a blind seam will help. If you follow the sewing technology correctly, then work in the future cannot be distinguished from machine stitching. To get the correct blind stitch, follow these instructions:

1. To begin, carefully iron the seam allowances inside out.
2. We make the first seam. The needle and thread must be inserted from the inside into one of the folds so that the knot remains hidden, and the working thread “comes out” exactly along the edge of the fold of this part.
3. Next, grab a few millimeters (3-6) of tissue from the opposite side with the needle. The result should be a straight stitch connecting the two parts. The needle then comes out again on the front side to complete the next stitch.
4. Again, pick up a few millimeters of fabric from the opposite side and bring the thread to the right side of the fabric. Finishing the stitch, pull the thread gently. Be careful not to overtighten the pieces. There is no need to be too zealous here.
5. Continue like this. Finally, make two knots to better secure the thread.

Advice: space the stitches evenly and make them the same, so the work will look neater and prettier.

How to close a hole with a sewing machine

A hole in jeans is not always an attribute of a stylish look. It happens that a hole appears as a result of the negligence of the owner or due to excessive wear. In order not to send your favorite thing to a landfill, you can bring it “to life” with a sewing machine.

Modern sewing devices are good because their functions include the execution of many decorative stitches, which can be used to decorate a thing in an interesting and original way. As a result, the work will be done as if jeans in this form were sold in the store.

Using colored and fashionable inserts, you can mask the defect by covering the hole. If at home there was no fabric suitable for decoration, or you are against such creativity, then you can use another option.

The area with damage can also be duplicated with the same fabric. To do this, you need to stitch the edges of the jeans strips, put them from the inside under the hole diagonally and sew. This will make the patch look like part of the design. The work is ready.

Why do scuffs appear

Clothing wears out quickly for a number of reasons. Attrition, a hole between the legs are the most common defects that appear on comfortable things that we wear every day. As a rule, such shortcomings arise due to the fact that:

1. Pants are not bought in size - "back to back" or, conversely, the thing is too loose. In both cases, excessive friction occurs, which then leads to damage to the fabric and the inevitable repair of the product.
2. Between the legs, scuffs most often occur with jeans with a low waist.
3. Improper washing or ironing of clothes. Before sending things to the drum of the machine, read the information on the label at what temperature it is allowed to clean the stains, and which spin task is recommended to be turned on.
4. Hot water leads to premature wear of the fabric, and as a result, to the rapid appearance of scuffs on the material.
5. Jeans cannot be dried in the machine. The best option is outdoors. Thus, the pants will last longer, and the fabric will deform less often.

Pants can get torn anytime, anywhere, so it's a good idea to know how to repair jeans worn between your legs and how to carefully patch your clothes. The correct way to get rid of the defect that has arisen, making it invisible is to use patches or stripes. Try to give your favorite clothes a second chance - make things original, exclusive, and continue to wear them with pleasure.

Jeans are worn between the legs, and there is either no desire to throw them away, since they are loved ones, or there is no way to buy new ones? Washed jeans can be given a second life.

You can apply a patch from the inside, and stitch the holes. But there is another option for repairing jeans worn between the legs: make an insert.

What do you need:
. A spool of thread that is as similar as possible in color to those with which your jeans are stitched (It is advisable to buy special ones - for jeans. If you don’t find any, you can use two ordinary spools and insert two threads into the sewing machine needle or sew the seam twice, laying the second line exactly on the first) and a spool of thread matching the color of the fabric of your jeans.
. Scraps of denim in a color similar to the color of your jeans. If these are not available, you can use any color of denim or even take leather. It is very good if you have jeans or any other denim clothing from which you can ruthlessly cut out the necessary details. You can make breeches from jeans by cutting them off. At the same time, cut out the necessary parts for the inserts from the cut off lower parts of the legs.

Step-by-step photo guide for repairing jeans worn between the legs:

Wash and iron jeans that need to be repaired.
. Cut out the most complete patches from another selected item. Wash and iron them too.
. Open the top of the crotch seam and the middle back seam (approximately to the middle or slightly above).

Using a ruler and a piece of chalk or dry soap, mark out the details on one front side of the jeans as shown in the photo. The rubbed area should be completely behind the line. Make a seam allowance by drawing a second line parallel to the first.

Cut along the first marked line.

Attach the cut piece face to face on the second part of the jeans, circle the line, also draw a second parallel line for the allowance and also cut along the first line. The seam allowances must be the same. Check whether the cut-out parts are the same on both parts of the jeans: all edges and length must match.

Now you need to make an insert pattern. Take a sheet of paper (you can take thick polyethylene), put the part cut out of jeans on it and circle it exactly along the contour. Make an allowance from the sewing side to the jeans (the same amount as on the jeans). Cut out.

It’s good if the pattern fits completely on the denim patches: circle it exactly along the contour (no allowances are needed) and cut it out. If not, then the pattern will have to be divided into two parts as shown in the photo. Make a seam allowance. When arranging the details, look, make no mistake. Details should be located in different directions.

You can do it differently: fold 2 scraps of denim face to face. Lay out the pattern, circle it and cut it out. Get the 2 parts you want. Check that they are the same.

You can make another insert, for example, according to this pattern:

On jeans, a detail is cut out along a bold line. Also mark a thin line on the jeans, as in the photo. We make a pattern with an allowance of about 1.5 centimeters. Cut out 2 pieces for inserts. We process the edges of the parts marked with a dotted line in the photo with a zigzag. We also process cut edges on jeans. To attach the insert to the jeans, you need to tuck its edges, marked with a dotted line, along a thin line and sew, stepping back about 2 mm from the edge. Then put on the front side of the jeans, from where the part was cut out, bast so that the part fits exactly into the cutout on the jeans from the side of the middle and crotch seam (if there are any irregularities, trim them). The other edges of the insert should match exactly along the thin line marked on the jeans. Sew along the front side exactly along the first laid line on the insert.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
. Fold the top and bottom pieces face to face, stitch along the seam allowance. If necessary, trim the edges by cutting off excess fabric. Overcast the edges of the seam with a zigzag. Turn the bottom part down and stitch along the front side with threads that are similar to the color of the stitching of your jeans.

Face to face, attach the pieces to the back of the jeans and stitch. Make sure that both sides match with each other: the beginning, middle seams and end of the inserts should be at the same level. Work the edges of the seams with a zigzag.

Unscrew the inserts and on the front side lay a line along them (with threads of the color of the finish), wrapping the seam on the inserts.

Topstitch the back center seam. Secure the end of the previously ripped seam by stitching it back and forth several times. The edges of the right and left inserts in the seam must match. Work the edge of the seam with a zigzag.

Topstitch the seam on both sides with threads in the color of the stitching of the jeans. Don't forget to fasten the ends of the ripped seams so that they don't start to unravel.

Jeans are in the wardrobe of every fashionista, they are comfortable and durable. Moms actively equip children in denim clothes. But despite their strength, jeans are torn from time to time, and in the most unexpected places. Here, “hands growing from where it is necessary” and female ingenuity will help.

We sew up holes on jeans, depending on the part of the product

If a hole in the knee can be turned into a creative and fashionable addition to a modern look, then with a shred torn out on the pope, this option will not work.

Mending a hole in jeans between the legs

Holes appear in places of greatest friction. With extensive abrasions, a patch is indispensable. It’s great if there are trimmings left after shortening the trousers, if not, then a flap of a suitable shade can be found in a textile store. When choosing threads, you need to consider their resistance to fading.

We must act with the utmost care. The patch is applied from the inside out. Depending on the capabilities of the machine or hand stitch, the edge of the patch is sewn to the product. The frayed edges of the hole are sewn to the patch using the stitching method. The seams are laid close, close to each other. It does not matter if the machine does not have the function of sewing backwards, you can simply unfold the product before the next seam. With a conscientious approach, the patch will be almost invisible.

Advice! Leather patches on the crotch “a la cowboy” look very impressive, if you are friends with a needle, you can easily upgrade old jeans into a new interesting piece of clothing.

Instructions: How to manually patch a hole in denim trousers at the knee

A hole in the knee for young people is not a problem, but a trendy accessory. Children's pants can be decorated with overhead patches even in contrasting colors. But with the husband’s trousers, you will have to try so that an imperceptible trace remains from the hole. Here, the same thing will come to the rescue. Step by step it looks like this:

• A patch larger than the hole is glued on the left side of the product. For this, it is convenient to use glue.
• The entire surface of the damaged tissue is covered with frequent, closely spaced lines, the so-called piece is carried out.
• If the damage is extensive, then you should be patient, you may have to fill the hole with lines in several approaches.
• We make the stitches even and without tightening so that the patch does not look like a dried mushroom.

For newbies! Glue is applied with the rough side down and ironed with a hot iron through a layer of fabric.

How to quietly patch a hole in the pope in denim pants

The simplest and most effective way to hide a torn tuft on trousers in the buttocks area is to apply an appliqué. An alternative option is embroidery, but there are not so many lovers of embroidery among us, so we will consider the first option. The appliqué can be made from denim, with a beautifully designed overlay patch with a contrasting stitch.

Modern cars have a rich arsenal of decorative seams, it remains only to choose the fabric for decorating the hole to your liking. Modern fashion trends are so diverse that both lace and wool elements will look organic.

Advice! When eliminating a hole, try not to focus on it, sew applications randomly and more, as if it were intended by the designer.

How beautiful to sew a gap in fabric or seams on jeans trousers

Jeans have straight rips, cuts, or L-shaped damage.

When sewing them, the main thing is not to tighten the edges very much, the stitches are made close to each other according to the figure-of-eight principle.

The threads are matched to the tone of the fabric to hide the trace of past damage.

Instructions: How to decorate with sewing finishing elements (embroidery, patch)

Ethnic style jeans look interesting. Here you can use a variety of colors. Threads need to be selected thick so that the appliqué is embossed.

Advice! To simplify the embroidery process, use a small hoop.

Discreet embroideries and appliqués are relevant for men's trousers.

In needlework stores, you can find appliqués and patches for any gender and age, almost all of them are glue-based. That is, it is enough just to attach it to the front side of the product and iron it with a hot iron.

Important! To prevent purchased stickers from coming off during washing, sew them on a typewriter along the edge.

Other methods to mask the gap (resewing trousers)

A hole can be turned from a disadvantage into a virtue. To do this, you just need to add cuts on the legs. For naturalness, you can make a fringe. It is more convenient to do this with a needle, carefully pulling out the threads. It will be interesting to look at gaps with a finished edge. For those who like to draw, you can improve the hole to a curly hole. For example, cut out the first letter of a name or a hieroglyph, and then process the edge with a contrasting or matching decorative stitch.

With a vertical gap, you can sew a zipper into the hole. And if you hide the hole with a patch pocket (you can take it from other old pants), then the jeans will be intact and their functionality will increase.

If the trousers could not be saved, or the restoration went poorly, the Pants can always be upgraded into breeches or shorts. The edge of the product is easy to decorate with a fringe or sew on lapels made of colored fabric.

Tips on how to quickly close the torn sections of the product, if there is no time for needlework tricks

You are already on the threshold, terribly in a hurry. Sat down behind the fallen keys and heard a suspicious crack? or at work there was a nuisance, and the trousers were torn. An elongated cardigan or, if it's hot, a long, loose-fitting blouse will help hide the hole in the top of the pants.

Outside the house, such things may not be with you, so you have to resort to other tricks:

• The open seam can be stapled with a stapler.
• If the bottom of the leg is torn, you can symmetrically tuck the trousers, as if it were necessary.
• The hole in the hip area is easy to drape by tying a stole around the waist.

Jeans are perhaps the most unpretentious thing to repair, with imagination and perseverance, you can not only mend your favorite pants, but also turn them into a sewing masterpiece, a unique item in your wardrobe.

It is difficult to find more popular clothes than jeans. They are practical, comfortable, suitable for wearing to work, travel and home use. Despite the high strength and thickness of denim, for many people, from constant friction, the fabric between the thighs quickly wears out and frays. Consider how to fix jeans worn between your legs yourself using special and available tools.

Jeans refers to fabrics of increased strength, but a number of reasons provoke rapid abrasion of the threads. This trouble is more typical for natural denim without synthetic impurities.

Figure Features

Features of the structure of the body lead to increased friction of the tissue:

• close location of the hips;
• overdevelopment of muscles in athletes.

In some people, the thighs are in close contact, constantly rubbing when walking, leading to a thinning of the material.

Gait Features

The nature of the setting of the legs when walking contributes to the wear of denim - the fabric wears out equally for those who mince with small steps and walk in a waddle.

Material quality

The lightest and most dense denim is worn out. Thick denim rubs more slowly, but creases with the wrong size cause wear. The presence of synthetics protects the material well - the presence of elastane or polyester increases the wear resistance of jeans.

restlessness

Jeans rub not only when walking - for those who like to fidget in a chair, the wear process is constant.

Overweight

Most often, the owners of overweight suffer from holes between the thighs, especially if it grows without ceasing. The seams are stretched, the fabric is constantly under load not only from friction, but also from tension.

How to prevent a problem

For those who are constantly forced to struggle with jeans worn between their legs, it is useful to remember a few simple rules for preventing a problem.

Choosing the right size

Choosing the right size is the first step in increasing the durability of your jeans. To prevent jeans from fading, you should not buy tight products. Excessive tension in the fabric, if you want to fit into a smaller size than you need, provokes wear. With a large size, the folds from excess material rub against each other.

Normal or high fit

Models with a high or normal fit better fit the body, sit naturally, form fewer creases in the groin area. Experience shows that with a low waist, jeans rub faster.

Train yourself not to fidget in your chair

Fidgets will have to learn to control erratic movements during long sitting. When turning in a chair, you should rise to reduce friction, and just not make unnecessary movements.

Proper washing

Jeans should be washed in the recommended mode of the washing machine, without exceeding the temperature, without excess detergents and chemical stain removers, turning inside out and fastening the zippers. Do not fill the drum with several products at once - they will damage each other.

If the jeans are already torn, it is better to wash them in a special bag.

Timely removal of pellets

So that the thinned fabric does not tear when the lumps of fallen threads are accidentally torn off, the spools are removed with a special machine or a sharp blade.

How to repair ripped jeans by hand

There are several ways to repair torn tissue. In case of minor damage, the gaps are strengthened with blanks, if the gaps are significant, a denim patch is placed.

Tip: If you love jeans, don't throw away your old, worn pieces - they'll come in handy for repairs.

Patch

To install the patch, use a cotton fabric with an adhesive layer (doublerin) or any dense material. If the areas of wear are not cut out completely, denim is not used for lining, as excess thickness is formed, the seams are too thick. Jeans will wear out even faster, you can rub your thighs.

With a large area of ​​holes, it will be necessary to cut out completely worn material. In this case, a denim patch is made of suitable quality and thickness (old jeans will do).

What you need

Before repairing, a set of materials and tools is prepared based on the chosen method for repairing jeans.

Threads in the color of jeans

The threads are chosen according to the color of the jeans, the colors corresponding to the tone of the seams are also allowed. Thread thickness - 30-60, for thick fabric - 30.

Sewing machine

Although small holes can be sewn up by hand, a sewing machine is preferable. The seams are smoother, better quality, last a long time. It is important to correctly set the thickness of the fabric and the stitch size (no more than 2.5 millimeters).

Needle

For denim, choose needles with a sharp end, 90/14-110/18 thick, depending on the density of the denim.

Scissors

Scissors cut out a patch of the required size.

Chalk

To make markings on jeans and cut the workpiece, use tailor's chalk with a narrow edge.

Action algorithm

Consider the sequence of work:

1. Jeans and patchwork fabric are washed and ironed (except for adhesive materials).
2. Turn the product inside out, determine the size of the required patch. The size of the prepared piece should be larger than the total area with holes by 0.5-0.7 centimeters around the entire perimeter.
3. Sew the cut piece from the inside with a basting seam, make sure that there are no folds, bubbles, all holes are carefully closed with a patch.
4. Depending on the type of patch material, iron (adhesive) or perform multiple seams using the stitching method.

It is not difficult to put such patches, but these methods close up small damages, slightly worn areas. Therefore, restoration work begins immediately after the appearance of small abrasions.

Issue price

Installing a patch or reinforcing fabric will not require significant costs. The cost consists of the price of dublerin (100-200 rubles per meter), the purchase of threads and needles of the right size, if they are not at home.

The cost of repairs in the studio depends on the class of the institution, the complexity of the damage. Usually it is possible to keep within the amount of 500-1000 rubles.

Round adhesive patches

Adhesive fabric patches are the easiest way to patch holes. For jeans, a dense fabric such as coarse calico, doubler is chosen, which are most similar in density to denim. You can purchase a ready-made round patch or cut it out of adhesive material.

To glue the fabric, use the iron in the "Wool" mode. One place is carried out with an iron 5-6 times, until the tissues are tightly connected. After several washes, the glue peels off and crumbles, experienced housewives prefer to play it safe by immediately sewing on a patch with threads.

Shtukovka

Shtukovka - a way to mend holes by placing a layer of reinforcing fabric under the holes. For this type of repair, it is important to choose threads that do not differ in color from denim at all.

Working rules:

• put a piece of fabric on the wrong side and sew it without folds with contrasting threads;
• on the front side, make the maximum number of machine lines, placing them parallel to the threads of denim; it is convenient to use machines with a reverse stroke;
• the other part of the lines is done at an angle of 90 °.

The bottom fabric is attached to the base with a dense mesh of stitches. It is important to carefully fasten all the threads with knots.

How to sew up a hopelessly damaged product with your own hands

It is useless to darn large holes in jeans. In this case, you can repair the thing by sewing a new fabric in place of the damaged one.

Sequencing:

• pick up pieces of denim that are suitable in size, color, structure;
• rip jeans at the seams - median on the back and step on the inside of the thigh;
• cut out damaged areas (symmetrically on both legs);
• prepare patches in accordance with the cut pieces (taking into account the seam allowance);
• zigzag all cuts on jeans and patches;
• sew patches;
• restore all seams on the product.

Note that the work is difficult, requires skills. You can’t sew denim on any sewing machine, you need to adjust to a dense fabric, select the stitch length, and restore decorative double seams. In the absence of experience, it is better to entrust the work to a professional so as not to completely ruin your favorite jeans.

Other damage to jeans

Holes and terry are fashionable decor elements of many jeans models. They are good only for young people - on vacation and parties. Fans of neatness have to close holes on their knees and buttocks.

On my knee

There are several ways to remove holes on the knee. Consider the simplest and most effective:

1. Applications. The method is convenient for children's and youth models. You can buy a decorative patch with embroidery, sew on your own beads, beads. Fashionistas sew large patches on both knees from denim of a different color.
2. Adhesive fabric for a patch (doublerin). Lay on the wrong side and glue with an iron. To prevent the glued material from falling off, it is sewn along the edges with a decorative or inconspicuous stitch.
3. Shtukovka. A handy way to patch up holes is to decorate the hole with parallel stripes. The main difficulty is that you will have to rip the trouser leg along the inner seam, because otherwise you will not use the machine. You can sew on the patch by hand if the fabric is slightly frayed.

With any method, the patch is sewn with a reliable seam, since the fabric tension on the knee is significant. A poorly fixed patch will quickly come off, enlarging the hole.

Reference: if the patch turns out to be noticeable, they usually make a symmetrical decoration on the other leg.

On the pope

Thick denim often rubs on the buttocks - under the back pockets. For sealing scuffs, the shtuk method is suitable, which is performed as discreetly as possible and on a thin patch. Thin threads are chosen, the lines are laid infrequently so that the denim does not bulge, does not rub the skin folds.

You can patch a hole in another place on the pope with a decorative pocket, appliqué.

Decorative patches are fixed with an adhesive cloth and stitched along the edges so that they do not peel off during friction and washing.

Jeans allow the most unexpected and bizarre decor elements. Damage can be repaired in many ways, giving them the appearance of jewelry, design highlights. Do not discard your favorite thing - you can give it a second life without spending a lot of money and effort.

Jeans today are an integral part of every person's wardrobe. They have become available to almost everyone. If some jeans become unusable - they become very dirty, torn, you can buy new ones. But it is not always easy to say goodbye to your favorite thing, especially if it is expensive and branded.

The area between the legs wears out the fastest. In this place there are scuffs, small and large gaps. You don't have to throw away your favorite jeans right away. You can try to darn them so that they still last for some time.

Tools for the job

Their choice depends on whether you have to darn the product manually or on a typewriter. If you have to sew with your hands, you need to take a household needle that is suitable in size. On the package with needles indicate their thickness and what material they are intended for. For denim, 11 or 14 will work well. In order for the thread to be inserted well, its size must match the needle. The threads must be strong so that the darned hole does not come apart again after a short time. The size of cotton thread is suitable for stitching 50-80, synthetic - 50-60. It is better to use polyester thread. They stretch well and are able to withstand heavy loads.

Also useful for work:

• scissors;
• pins;
• unwanted jeans or a piece of fabric of the same color.

Hole processing methods

There are several ways to repair damage to the fabric between the legs in jeans, depending on their scale. If the gaps are small, you can resort to stuffing or the usual stitching of the edges with your hands. For larger holes, internal patching or patching may be used. Stitches can be applied by hand or with a sewing machine.

How to darn by hand

Cut off all protruding threads without touching the fabric itself. If the tear is minor, you can darn your jeans without using a patch. Insert the thread into the needle, at the end make a tight knot. First, sew the edges of the gaps tightly together so that they do not diverge further.

Sew the edges around the hole. Start making stitches at a distance of 1 cm from it on all sides. Taper stitches as you approach edges. Pull the thread, cut off the excess.

On a note! Do not sew very close to the edge, the fabric will fray. For darning, it is better to use buttonhole or overcast seams.

Shtukovka

This is a sewing process in which adjacent stitches are sewn. The threads lay down in such a way that they reliably restrain the product from further abrasion and hide all visual defects of the fabric. The stitches are laid close together with a sewing machine.

Shtukovka - one of the best methods of getting rid of gaps, but also quite painstaking. You need to choose a fabric that matches the color and structure of the jeans and attach it from the inside out. The machine must have a reverse function. The first stitch is made in the forward direction, the second - in the opposite direction. The line should pass not only along the patch, but also go beyond its limits by 1-2 cm.

If the machine does not have a reverse function, you just need to unfold the product after each stitch and sew straight. At the end of the procedure, cut off the fringe on the front side and steam the darned area with an iron.

Applying a patch

If the jeans between the legs are torn badly, then you can’t do without a patch. Match fabric of identical color and texture with ripped jeans. In size, it should be a couple of centimeters larger than the hole. Threads also need to match the tone.

Trim loose areas with scissors. Give the patch the desired shape. Secure it to your jeans with pins so it doesn't move. Insert a thread of a color contrasting with the patch into the needle, make a knot at the end. Baste the patch with a basting stitch. You need to pull out the pins. Only after that sew the patch with threads matching in color.

How to transplant and how to care for indoor specimens? We have an answer!

About how and how to wash the glue moment from the skin and various surfaces is written on the page.

Go to the address and learn how to make strawberry jam for the winter.

On a typewriter

It is very easy to sew up chafing between the legs on your favorite pants with the help of a special machine darning.

You will need:

• sewing machine;
• matching color threads;
• scissors;
• interlining or a suitable piece of fabric.

It is necessary to turn the pants on the wrong side, put a piece of interlining (fabric) that is suitable in size, go over the top with an iron. Then sew up the frayed area with even parallel seams, using the reverse stitch. Sutures should be placed as close as possible to the damaged area. A correctly applied patch remains invisible.

A hole between the legs in jeans is not a sentence. If a thing is a pity to throw away, then you can reanimate it and mend it. In some cases, this is painstaking and time-consuming work. But following the above recommendations, you can get rid of the hole so that no one will guess about its presence in the past.