Hair derivation is one of the care factors, an important procedure for beauty and hair health. There are several simple ruleswhich should be adhered to not damage the follicles and improve the appearance of the hair, and they are easy to remember.

Scarf need to wear right

Thanks to modern designers and fashion designers, Pavloposad's headlocks again come to fashion, which became a symbol of Russia and among the most purchased accessories with tourists.

Properties and composition of thickener Toppik

Thin and rare hair on a woman's heads cause a lot of problems when creating hairstyles. For this purpose, in the market of cosmetic products, you can choose special thickeners for problematic hair.

Where to buy furniture for spa salon

Deciding to do business in a spa or cosmetology area, you will need not only a lot of money to start a project, but not less than enthusiasm to continue. After selecting the appropriate room and overhaul in it, you will need to buy high-quality furniture to trigger the picture.

Dandruff shampoos

The usual, the most common way to combat dandruff is the use of dandruff shampoos. It is accustomed to it the main part of the population of our country without consulting a specialist.

Dress for the new year 2015: Fashion trends

Choosing dress on New Year, every woman dreams look fashionable and elegant. Create a fairy-tale image On a holiday evening, the advice of fashion legislators and oriental horoscopes will help you.

Stylish, beautiful and well-groomed people always stand out from the crowd. The first thing that everyone pays attention is a hairstyle. How to choose a hairstyle? What hair length is most suitable for your face form? These are the main questions that people ask people who want to make fundamental changes to their appearance. There is an opinion that changing the hairstyle can be changed and your life.

There is a huge amount of opportunity for fundamental changes, for example, a professional Indian Henna for hair, you can buy it in online stores or in beauty salons. You can also change the hair length or pass the curl extension procedure. In order for the image to be holistic and stylish worth contacting professionals, as hairdressers are kind of psychologists who know how to choose length, color. As well as surgeons that, without a single cut, can correct the face form or hide defects, for example, the incorrect form of the ears, taking into account all their wishes. It has been proven that the change in style affects the character, adjusts the manner of human behavior.

Forms affecting the shape and length of hairstyles

The first to pay attention to when choosing hairstyles is on The shape of the head I. anatomical features Persons. Second - structure and hair quality. And only then on your own wishi. If the hair is sequential or they are badly damaged after clarification or frequent staining, then it is worth cutting dry tips. This will allow hair to recover faster. It is better to make a short haircut, as long, but lifeless strands look ugly. Long hair will look beautiful only if they are healthy. Strip hair while retaining their structure, will allow Indian Henna. If a girl works a lot, and she has no time in the morning for laying, you can make a short haircut. It is stylish and practical at the same time.

We select perfect hairstyle

As already mentioned, the choice of face form. Allocate nine basic forms.

• For round face Ideally fit haircuts that visually narrow and lengthen the face.
• Oval face It is considered universal and there are practically no restrictions here. The choice will depend on other factors: forms of the nose, the length of the neck and personal preferences of the client.
• For square shape Suitable hairstyle to smooth out sharp features, bringing closer to the form of oval. This can be done with a haircut ladder, a asymmetric bob is suitable.

State educational institution

Secondary vocational education

"Astrakhan State College of Professional Technologies"

Course project

On the topic: "Modern Hair Haircut Methods"

Performed: group student 3-10 pi

Osipova E.P.

Leader: Nazarova R.V.

Astrakhan 2005.

Introduction

Section 1. Theoretical part

1.1 General About haircut hair

1.2 Modern methods and haircuts

1.2.2 Milling razor

2.1.1 General

2.1.2 Comnience

2.1.3 Scissors

2.1.4 razors

2.2.2 style for every day

2.2.3 Grotesque

2.2.5 Sports haircut

Conclusion

1.2.1 Modern methods branch scissors

1. Zigzag method saw. The strand is delayed perpendicular to the head, the scissors are kept vertically and cut by zigzag the necessary hair length.

2. Method of injection. The strand is delayed perpendicular to the head, the ends of the scissors make point cuts of individual hairs, creating undercoat.

3. Void method. It can be performed by the ends of the scissors with a sliding movement both above the fingers and under them.

4. Sliding slice. Performed by milling scissors, which, as if smoothly slide through the hair.

5. Milling by twisted strands. A small strand twisted with the flagella and in several places fell by the ends of the scissors.

6. Method of NACCA. The strand is perpendicular to the head, the opened cloves of scissors are introduced into it and perform the movement from top to bottom.

1.2.2 Milling razor

Basement. The hair is divided into zones according to the lines of the haircut, the razor leads towards the ends of the hair in front of the comb. This method is done if the hairstyle requires a tight hair fit to the head (only on curly rigid hair).

Turning. Comb is the teeth up and the hair. The razor parallel to the comb moves in the opposite direction.

Slip. The hair is distinguished by the comb, the razor smoothly slides through the hair in the direction of the ends.

Method of nosha. The strand is perpendicular to the head, the razor moves from the ends to the roots, imitating the nobody (flair).

Dumb cut razor. At the twisted straight, we retreat perpendicularly small strands, twist in the harness, the ends cut off the razor.

Milling by the twisted strands by the method of "Bases". Separate a strand in the form of a square, twisting, pull the head perpendicular to the head and covering the movements in the ends.

1.2.3 Modern Hair Treatment Methods

Poincat (PointCut) - point gear cut from the ends of the hair to the middle (for branch).

Polishling - Point toothed slice from the middle of the strands to the ends.

Pointing - Sliding gear cut from the middle of the hair to the ends (straight scissors):

Pontovation is a gear sliding from the ends of the hair to the middle of a dry (more dull angle);

Pancaroting is sliding gear cut from the ends of the hair to the middle of the dry (you can on wet hair) (more acute).

Slossing (Clithing) - sliding cut with straight scissors from the roots of the hair to its ends, an angle is 30-60 °.

When laying hair upside, the slideshing is performed from the outside, and down - from the inside.

1.2.4 Modern techniques Stregek

Neomifies - Simple haircuts with straight scissors, without gear cuts and branches. Minimum details and simple shape (kare).

Geometric - geometric shapes, details, cutting hair.

Corridors - Unsecast details. Strikes with straight scissors. Corridors are of different lengths, can be placed in parallel or in a checker order.

Unguatened connected details - Unconded in form, but are connected in the image.

1.3 Factors affecting the choice of haircuts

Right choice Haircuts will allow the hairdresser to adjust the disadvantages of appearance and pay attention to its advantages. Choosing a haircut as a basis for hairstyles, it is necessary to take into account the individuality of the appearance of a person, as well as the existing anatomical features, i.e. The choice of haircuts determine the following factors.

1. Shape of the head and face. Due to the fact that the forms of the male head and female are different, distinguished and haircuts: in male haircuts The angular lines prevail, and in women - rounded.

2. Dimensions. Width shoulders, growth, complex, etc.

3. Border of hair growth. In men, for example, the hair growth boundary on the neck is lower than that of women, and the frontal notches are more pronounced.

4. Type and features of hair growth. Most often the complexity of the haircut is observed on the top of the top, in the frontal and calm parts Heads.

5. Hair density. In various zones of the head, the hair density is different. Usually less hair density behind the ear sink, in the bottom of the occipital zone, as well as in the zones of the frontal recesses and the crown. When choosing a haircut, this must be considered.

6. Height of forehead. For example, a high forehead must be covered with bangs.

7. Profile. There are three types of profiles: straight (perfect), which does not require correction; convex - with a serving middle part (in this case, the volume hairstyles on the forehead must increase); Went - with a protruding chin (in this case, a haircut is needed with a small bang, i.e. increasing the volume of hairstyles in the forehead area is not recommended).

8. Width of the back. The triangular edging of the hair on the neck, visually reduces the width of the backbone, and the straight line increases.

Section 2. Technological Part

2.1 Tools, equipment, devices used when performing modern model haircuts

2.1.1 General

The hairdresser's tool is designed to perform various hair operations (haircuts, styling, etc.). All tools used to handle hair can be divided into three main types:

1) hair combing tools;

2) hair cutting tools;

3) Tools for laying and curling hair.

From the ability to properly use each type of hairdresser depends on the quality of work. Therefore, the hairdresser should know the entire hairdresser's instrument and be able to use it correctly.

Selecting a tool for performing various operations depends on the task set before the hairdresser, i.e. The use of each tool allows you to get a certain effect that determines its choice.

Various devices used in hairdressers help the master in work, make it easier to perform some operations and protect the client from unpleasant sensations.

The electrical apparatus used in the hairdresser is designed for drying hair and accelerate chemical processes when they are painted and twisted.

2.1.2 Comnience

When haircut and laying hair, it is necessary to comb hair for their uniform distribution. For this purpose, combat, components of which are the training and teeth. Combly differ in length, width and frequency of teeth. The wide amounts are used when working with wide strands of the hair, small combs are used when working with small strands or when performing very short Strezhek. The frequent location of the teeth causes severe hair tension, which does not occur with a rarely location of the teeth.

According to the material from which combs are manufactured, they are divided into metal, wooden, bone and plastic.

Metal combs when combing wet hair, their external scaly layer damage, with the result that the hair becomes fragile, brittle and smell into two parts or more. Due to the fact that the Master most often works with wet hair, the use of metal combs in hairdressers is strictly prohibited . Wooden combat does not harm hair, but they are not adapted to work in the hairdressers.

Bone Combs - very expensive and most often produced in the form of ridges and various clamps used as decorative elements.

Plastic combs are the most common type of instrument today. They differ in the quality of plastics. All combs used for hairdressers must be carried out from high-quality plastics with antistatic properties, moreover, they must be flexible and durable.

The famous firm "Hercules" produces rubber combs, very well polished during the processing process and therefore practically non-damaging external scaled hair layer. The only disadvantage is fragility, i.e., with a very strong press, they can break.

Currently, widespread use of solicon comicing, characterized by special strength and security.

Combs used in the hairdresser, always smooth, do not glide in the hand, have pronounced corners, and ordinary - slide in the hand, have oval shape And magnetize hair in the process of combing.

By destination, everything can be divided into four main types.

1. Combined comb is a comb, on the working surface of which there are frequent and rare teeth. It can be used to work both in female and in the male hall. Combined small size with a thinner committee is often used in the male hall. Combined comb - universal, used when combing, haircut, cold and hot styling, as well as with worst and dumping hair .

2. Comb with a homogeneous location of teeth. On its working surface there are only frequent or only rare teeth. Such solids are used when combing hair and haircut in the female hall.

3. Painted with a pointed handle - Comb-tail. It is used when screwing hair on hair curbs and cough, i.e., where you need a clear separation of hair on strands. This comb cannot be used when having hair haircut.

4. Comb with an ordinary handle and a comb-fork-bug apply when painting and styling hair.

For massage of the scalp, combing and laying hair, brushes are also used. They can have bristle teeth, plastic or metal. It is preferable to use brushes with teeth from natural bristlesSince they better pull hair during styling. Brushes are two species: flat and round.

Flat brushes (Fig. 1) are used to massage the scalp and hair styling. At the ends of the teeth, such brushes should have balls that serve to protect the scratch's scratch's skin. Flat brushes during laying the master raises the hair from the roots to give a hairstyle. Laying with a hairdryer with a flat brush called "bombing".

Fig. 1 - Flat brushes

Round brushes (Fig. 2), called "Brasing", are used when laying for giving shape to the ends of the hair. Laying with a hairdryer with a round brush is also called "Brashing".

Fig. 2 - Round Brush "Brash"

All brushes must have a sufficiently rigid bristle and the hollow base for the free air passage. The height of the teeth at the brush is not the same.

"Striper" is a variety of comb shaking combs. With the help of these combs, operations such as highlighting and coloring, especially on the hair, the length of which is 25 to 30 cm. "Stripe" has a special nozzle, as a rule, a rectangular shape with several holes. When combining nozzles from the comb, its holes clearly coincide with the gaps between the teeth, so when applying the dye to the nozzle, it is located on the teeth of the rollery itself after a certain distance. Then the strand of hair is performed. Tooth teeth are arranged in such a way that the strand is frightened by the dye and is tightly compressed, while eliminating the possibility of staining the following strands.

Comb for melting and coloring. With the help of this combat, highlighting and coloring using special paper or foil. From the central axis, the teeth are bent at the ends of the triangle, which allows them to simply come up with them strands of hair. There can be up to four rows of teeth. In each row, different distances between the teeth (from 3 to 10 mm). Depending on which result it is necessary to obtain, a certain row of teeth are used.

The highlighted strand of hair is delayed perpendicular to the head, then perpendicular to it to enter the teeth of a specific row of combat and lifted, pulling the strands intended for staining, at the same distance from each other. Next, the main strand is released, and strands intended for staining remain raised.

By laying under these strands, special paper or foil, dye apply on them. Such an operation is carried out throughout the head or partially in some of its zones.

Scissors consist of three parts: two identical halves and a fastening screw. Each half scissors consists of a ring, lever and working fabric. The working facility has a sting, end and training.

Hairdressers are three species: straight, melting and flag.

Straight scissors (Fig. 3) are designed for hair cutting, beard and mustache, as well as for branch. They differ from the usual (household) scissors with quality of steel, from which they are made, the angle of sharpening workers, the canvas, the presence of sharp tips.

Fig. 3 - straight scissors

Straight scissors can be with a long, medium and short working path. Scissors with long working cloth most often used for haircuts in the male hall. Scissors with the middle workpapers are universal and used both in the men's and in the women's hall. Scissors with short workpapers are used for work only in the female hall, as the slide is stranded at a haircut women's hair It is more often made from the inside of the fingers.

Milling scissors are used to perform branch and hair adhesion. They are two species: one-sided and bilateral. Bilateral milling scissors have teeth on two working canvases, and one-sided - only on one canvase (Fig. 4). When working with milling scissors, the hair falling between the teeth remains long, and the hair falling on the teeth is cut off. So one-sided scissors allow you to cut more hairthan bilateral.

Fig. 4 - One-sided Milking Scissors

Flag scissors (Fig. 5) are used for simultaneous haircut and branch hair. One working fabric of such scissors is either the usual direct, or with small teeth, like milling scissors, or with two wide teeth, and on the second working facility is put on a nozzle with any pattern.

When having hair haircut with such scissors, you can get strands with milling hair on the outfit, many short and long strands with a pattern at the ends of the hair, as well as short strands with elongation along the edges and pattern at the ends of the hair.

When working, the scissors keep the fingertips of the right hand at the first phalanges, while the thumb is in the lower ring, and the non-name - in the upper ring.

Index and middle fingers are located on the top lever of scissors. It works only a thumb.

Fig. 5 - flag scissors

2.1.4 razors

The hairdresser's case uses a razor of two species: dangerous and melting.

Dangerous razors are designed for shaving faces and heads, as well as for haircut and branch hair. Dangerous razors are classic and changing blades, so-called machines. The classic razor consists of two parts: blade and case-case . The blade, in turn, consists of three parts: working canvas b, cervix with sweeps . The working facility includes the bunch, head, sting , Heel and radius pumping.

Depending on the shape of the working path, the razors with deep and fine radius plots are distinguished. The deeper the radius, the thinner and sharper the sting of the razor.

Currently, classical razors are not applied in connection with their inconsistency of sanitary and hygienic requirements.

Milling razor , Designed for haircuts and milling hair, consists of the following main parts: handles, safety comb, blades, fastening screws and guide pins. All razor details can be made of plastic or metal. Combined razors made from plastics and metal are widely used. A safety comb has a teeth from two sides (usually 7 - 9 pcs. On each side) that may be oblique and straight. The width of the safety ridge together with the teeth of 6-8 mm more blade width. The protruding teeth of the safety ridge make a razor safe.

2.1.5 Fixtures for hairdressers

For hairdressers, the following devices are most often used.

The pulverizer is for wetting the hair at a haircut and styling, as well as applying different lotions that create a hairstyle.

Bowls - for cooking dyes, fixing for chemical curvage and other hair care products.

Tassels - for breeding and applying dyes and other drugs.

Shaker - for mixing dyes.

Sponges - for applying chemical composition and fixing.

Plastic and metal clamps - for separation of hair on zones and strands when cutting, laying, treatment and painting.

Insulated cap, used in chemical curuy and hair treatment.

Mask used when fixing laying.

Also use timer, special collars, hair rheeling caps, minzur, rubber gloves and much more.

2.2 Technology for performing modern haircuts

2.2.1 Haircut using styling and colors from Ciroapicella

Highlight the dread zone with a circular zigzag sample.

Starting from the occipital zone, choose large strands of hair and cut them into the Slyuxing technique.

Using a trimmed strand as a landmark, continue the haircut all over the perimeter hairstyles.

Go to the Makushka and select a strand landmark. 6.

Cut the hair on the top, gradually reducing their length to give hairstyle ease.

Upon completion of the haircut, dry the hair.

Then treat the ends of the hair with the tips of the scissors to make them more air.

2.2.2 style for every day

"Dale" - style - the idea for every day. Clear geometric lines are hairstyle to emphasize the decisiveness of character

Highlight on two levels hairstyles vertical sections 2 cm each.

By forming vertical sections, cut the hair, the occipital zone using the Slucing technique.

Cut the hair of the front zone from the ear to ear.

If necessary, once again cut the strands of the occipital zone and disperse the hair of the sections left intact.

Our choice is blond with all its shades, from neutral to platinum, from copper to gold. The original combinations of warm tones will help to make additional dynamics, which emphasize the clarity of lines.

2.2.3 Grotesque

Start cut from the occipital zone. Rides to separate horizontal samples and delay at an angle of 20 °.

Cut the temporal zones in the same way.

Method of "ponting" cut the hair of a dark zone, separating strands with vertical probes.

Perform the final mill.

2.2.4 Haircut with zigzag bangs

Treat the hair of the temporo-lateral zone, pulling out their heads perpendicular to the surface of the head, using the PointCut technique, and then go to the occipital zone and straighten it to the middle.

Similarly, handle the opposite side of the head.

Connect hair with hair of the frontal darken zone using the Zigzag technology.

Bang also takesout the use of Zigzag technology.

Run an edging of the nape.

2.2.5 Sports haircut

On the parietal zone to separate the strand and ask her length. This strand will be the control. Then cut the parallers and side zones.

The occipital and temporal side zones are cut by vertical probes. The occipital zone can be concentrated "na no" or leave slightly elongated for greater pomp.

Make an edging, the length of the hair behind the ears is at will.

Hair well mixed and sliding technique to cut under a razor combing across his head.

Simple scissors handle the whole hairstyle using a gear uneven cut. The resulting effect of the hair length of the hair makes a haircut easier. Create the effect of "enshosteness" using the same haircut equipment. Dry haircut with a hairdryer. Gel can be used for laying.

Conclusion

In conclusion, summarize the main results term paper.

Thanks to the emerging new silhouettes and shapes of haircuts, hairstyles, a person acquires hope to fit the criteria of modern fashion.

In the process of writing a course work, I studied new methods used when performing modern haircuts.

Based on the studied material, the following conclusions can be drawn.

In my opinion, given the advantages and disadvantages of the client's face, you can choose a haircut with any of the described haircut methods. And this haircut will delight him with his novelty and originality.

In my opinion, the progress of hairdressers is possible due to the use of completely new modern methods for performing haircuts.

Bibliography

1. ON Kuleshova, O.B. Iltaeva, so-called. Butko "Basics of Design Hairstyles" - M., 2004.

2. E. Kurmanaevskaya. "Himself a hairdresser." - Rostov-on-Don, 2004.

3. N.G. Moiseev. "The art of hairstyles." - Rostov-on-Don, 2004.

4. Catalog of hairstyles "ESTETICA" №1 / 2005 (15).

Women's haircut "Classic Kare"

Introduction

Chapter I. Haircut Hair

1 General Non-Haircut Hair

1.2Will hair cutting operations

3Factors affecting the choice of haircuts

Chapter II. Technology Hair clipper "Classic Kare"

1 Tools and Hair Contacts

2 Classic Kare Hair Execution Technology

3 labor safety rules when having a haircut

Conclusion

Bibliography

application

Introduction

The relevance of the chosen topic: This topic is relevant, since modern haircuts are a way to declare the world about yourself. New trends dictate their rules in fashion. For example, in modern haircuts Not only beauty, but also underscounted individuality. Modern haircuts are suitable for different types Persons. But still the owner of the most best Strezhek They will be honored that their faces have the right forms. The most fashionable modern haircuts, but at the same time not suitable for you by style or by the type of face can ruin your mood for a long time. And at the same time experiments with external species May be forgotten forgotten because of fear of future problems.

purpose research work: Develop a technological process of the "Classic Kare" haircut.

· Develop a clipping technology "Classic Kare";

· Explore the tools and adaptations to perform a clip "Classic Kare"

The object of study: in this research work is the technological process of the "Classic Kare" haircut.

Research Subject: Technological Process Haircut "Classic Kare".

Chapter I. Haircut Hair

1.1 General Hair Riding

The haircut is one of the most difficult types of work in the hairdresser. After all, from how high-quality it will be performed, the appearance of the future hairstyles depends.

When performing haircuts, the hairdresser should be able to apply various hair treatment methods.

Before making a haircut, you need to properly split your hair on the strands of the samples that define the form of the future haircut. The probes are horizontal, vertical, radial and radial.

Horizontal probes are probes located parallel to the floor plane.

Vertical probes are probors sent perpendicular to the floor.

Radial probes are held at an angle of 45 ° to vertical or horizontal samples and allow you to get the maximum increase in the length of the hair with a haircut.

Radiy probors are probor leaving from one point.

All haircuts can be divided into contrasting and non-contrast.

Mostly haircuts are contrasting, i.e. these are haircuts in which hair has different lengths on the different sites Heads.

With non-contrast haircuts, hair leaves the same length in different parts of the head. Each type of haircut consists of separate technical operations.

1.2 Basic hair cutting operations

Strand for strand.

When performing a haircut "strand for strand", the hair is shortened on the same length, both on the whole head and in different areas. When performing a haircut, the hairdresser should stand behind the client. At first, the hair is combed according to their natural growth, then the comb is capturing the strand on the edge line of the growth of the dark zone, clamp it between the middle and index finger of the left hand and, pulling the perpendicular to the edge line of hair growth line, is cut on the desired length. This strand will be the control during the haircut of the subsequent strand, i.e. All the rest of the darken zone's hair is delayed strictly perpendicular to the head and cut, focusing on this strand. Then proceed to the haircut of the temporal zones. At the same time, the first strand is cut off, pulling perpendicular to the edge line of hair growth line, and all subsequent delayed perpendicular to the head. Thus, all hair cuts up to the middle of the occipital zone, first on the one hand, and then on the other. Moreover, when cutting the left temporal side zone, the master should face the client. For convenience, the hair of the lower occipital zone is cut, combing them from the bottom up, but it is strictly perpendicular to it.

Share - operation of getting a smooth transition from short to long hair. This operation is similar to the note of the hair "No", but requires more thorough execution. Even the slightest violation of the smooth transition from long hair The short one will lead to the fact that characteristic stages will appear in individual sites, which indicate a poor quality performance of the tub. The latter is performed by simple scissors, the subtle ends of which can be very accurately performed. With the bag with scissors, the master in his left hand holds a comb, which systematically combines her hair towards the planned hairstyle, in the right hand, the scissors are located. After combing the next strand of the hair, the ends of which are cut under a stupid angle, the next strand is combed. Thus, the master goes from short hair (at the base of the neck) to long (on the top). Scissors are all the time in motion. The larger the transition from short hair to long, the more effectively it looks, but it is also harder.

Milling hair.

Milling is hair vacuum. The essence of the reception lies in the interpretation of individual strands at different heights. Milling can solve different tasks. It is not only necessary when creating a certain silhouette of haircuts (modeling), but also contributes to preservation hairstyles, and also gives a haircut natural look. Milling by the roots is performed, at the ends of the hair and at different heights of strands.

Increase the volume of hairstyles.

To increase the volume hairstyle makes a bare mill. It is performed by pulling out the hair of the dark and the upper occipital zones. To perform the reception, a strand of the comb with rare teeth is combed, lifted up the uplink and after 0.5-1 cm plugged with the tips of the scissors separate thin strands (after 1-2 inter-interval). Spring length 2-4 cm depending on the length of the haircut.

Milling hair ends.

Filling the ends of the hair is recommended in almost all haircuts - it gives her hair with a hairstyle. Milling on the ends of the hair can be made by straight scissors, mobiliates, dangerous or milling razor. Cut hair both straight and oblique cut. Now the milling is increasingly popular, performed by the Pointing, as well as slideshing. To perform the reception, they take a strand with a thickness of 1.5-2 cm and a length of 3-5 cm and work with milling scissors. They are closed at a distance of approximately 2 cm from the ends of the hair strands. This operation is made several times, and depending on the thickness of the hair.

Milling with straight scissors.

To perform this reception, you need some skill. Pull the hair strand. Open scissors and bring them about the middle of the strands. Slightly twist the workers of the shears and simultaneously promote them to the ends of the hair. In no case do not closame the scissors, otherwise the strand will cut.

Milling hair with a milling razor.

There is a special tool for branch. It is very simple to work. The razor lead along the raised strands from the roots or from the middle of the strands (depending on the thickness of the hair) to the ends of the hair. The razor must be kept almost parallel to strands. Movement repeat 4-5 times.

Milling hair hazardous razor.

This technique significantly improves the quality of the haircut. With it, it is possible to increase the volume hairstyle, especially in the area of \u200b\u200bthe pattern and the backbone, even with roasting hair. Milling with a razor hair is made only by wet hair. Hold your hair strand one hand and pull it out to the desired angle. The thick of the hair, the closer to the roots you can start mirror. At the beginning of the reception of the razor blade, press the plafhmy to the hair. Bringing the razor to the outlined hair cut, increase the angle of its tilt. Movement Repeat 2-3 times, if you need a large pomp - 3-5 times.

Milling long hair.

For branches of long hair, make sure to strand and the same techniques, only from the palm, remove your hair. The depth of branch can be different depending on the target. It usually ranges from 2 cm to 1/3 of the length of the strands.

Milling in the ponting technique.

In modern haircuts, the wizards are trying to use techniques that allow not only to create an original form, but also the most simplifying subsequent care for the hairstyle. One of these techniques is ponting - a haircut performed by Ponting. Thanks to the oblique cut and the tooth, the hair is superbly lying, and after washing, sometimes enough to dry themselves with a hairdryer - and the hairstyle acquires a primordial look.

Haircut using hair information "No."

There are two ways of hair information "No".

.Without use of combs. In this case, the master enters the machine into the hair on the edge line of their growth, and then smoothly increases the angle of inclination, promoting it up to the top of the top. From the angle of tilt the machine depends on the smoothness of the transition.

.Haircut using combs. The master introduces a comb on the edge line of their growth and cuts the machine to the hair on the plane of combs. The smoothness of the transition depends on the angle of inclination of the comb.

After executing the information of the hair "No" performs tube. The method of hair information "No" is used on temporo-side and occipital zones and are performed by a typewriter or razor.

Graduation. haircut Hair Kare Milling

Graduation - a stupid hair cut from the inside of the fingers, at which each subsequent strand is shorter or longer than the previous one.

.Internal - each subsequent strand is obtained longer than the previous and hair, as if tighter inward.

.External - every subsequent strand is shorter than the previous one.

When performing calibration, they first highlight the horizontal samples, then the edging on it is performed. The next strands are cut from the inside of the fingers on 1-2mm in short or longer than the previous one. With outer calibration, the delay angle is gradually increased.

Edging on the temples.

The edging is the operation of the haircut as a result, which forms a clear line, which limits hair according to their natural growth and creating an outline of a future hairstyle, is performed on the back of the head, whiskeys, bangs. Shake whiskey is not so easy. In many haircuts, whiskey remain open, so they need to perform their edging with special attention and thoroughness. Creation of trimmed whiskey instantly rushes into the eyes and can spoil any hairstyle, even the most fashionable. Depending on the cutting model, the edging of the temporal zone can be performed in various versions. Classic hairstyles most often have a direct or corner contour of the temples. The edging in the form of an extended strand directed on the cheeky, it looks very elegant, and the straight angle is strictly. In haircuts on hair middle length, such as Kare, the line of temporal edging continues the contour of the nape.

Edging on the back of the head.

In terms of edging, the head is a problem zone. More often than any other zone, the occipital part of the head may differ in any disadvantage: the vortices, low or high hair growth line, the painting of the wrong shape, a different direction of the growth of neighboring strands and so on. On the back of the head, the hair grows very individually, so you need to take into account its features and when choosing a haircut, and during the completion of edging. In the form of edging, the nape can be different: oval, rectangular, trapezoid, angular or triangular, with elongated curls and strands. The first three species are the most common, especially in classic haircuts. Modern youth often gives preference to more original edging forms - in the form of an extended strand or pigtails.

With the help of various edging options, you can change any clipping model almost beyond recognition. For example: classic Care, made with asymmetric edging, "ladder" or elongated front and short rear strands, will look very elegant and peculiar. If there is a population beautiful shapeAnd the hair grows correctly, you need to emphasize these advantages of easy adjustment. Do not change the contour of the edging itself. But in the case when there are any occipital defects, you will have to work hard. First, it is necessary to determine the natural position of strands. For this, hair must be thoroughly combing, tilt the head several times in different directions and beat a little strands. Then all the flaws will immediately become more noticeable, it will be easier to decide to what kind of edging to resort. As a rule, if the hair is very thick, they form something like a pigtail on the back of the back. Make the contour of the haircut even and clearly impossible, so it is necessary to competently "beat" a natural flaw. A successful decision will be edged in the form of an extended strand. If the hair is not only thick, but also short, adjustment is better made by a typewriter or a dangerous razor. Often, strands on the back of the back are growing in different directions, forming a vortex or vertical sample. This can be fixed, if you promote the correction haircut from the ears to the center of the nape. It happens that the occipital hair lay down on each other, so the strands become dense and dense. They must be conserved by milling scissors, and thoroughly. For rare strands, the roasting branch is perfect. It raises her hair from the roots and give them an extra volume.

Bang is an important element of the haircut. She can decorate even the simplest hairstyle. The main thing is to choose a successful version of the bangs, taking into account the type of face and competently spend the haircut. Bang can be called a universal element, because it can be done in almost every hairstyle, on an arbitrary hair length. The style in which the bang is made may be any: someone prefers classic option, and someone like something original. For any option, the cutting rules are the same. Before starting a haircut, it is necessary to determine the optimal sizes of bangs: length, width and thickness. Length and thickness can be different, but the width depends on the width of the forehead. It is undesirable to make the contour of bangs for whiskey. Hair intended for bangs are distinguished by the sacrament. Many variations are a lot: straight, oblique, triangular, P-shaped, parallel hair growth lines. You can choose any of them, but it must be remembered that the bang depends on where to hold it. The further the sample from the head of hair growth on the forehead, the bangs will be thick. Hair Type - Another factor playing important role When choosing a bang option. Rare I. curving hair Smooth bangs suitable with the same length of strands. Thick and hard hair are usually extremely naughty, so it is not recommended to make bangs thick and long. True bangs B. classic style very simple. Wet hair must be carefully combed, to separate the strands intended for bangs, and the rest will fix the "clarops". In the process of haircuts, the strands are separated from each other after 1-2 cm. The first-aggravated strand will be the control for the rest, so it is necessary to set its level carefully. Do not forget that it is better to add 1 cm to the outlined length, because after drying the hair will be shorter. The second strand along with the control is lifted on the comb at right angles to the head. The cut line should pass strictly at the control level. So, strand for strand, cuts all hair weight for bangs. After the haircuts, they need to comb and carefully check the contour. All irregularities should be fixed with a neat edging, then profile. Classical bangs can be given additional pomp. It will be especially good to look in hairstyles of the type of kara. In this case, the hair is better distinguished by a triangular or P-shaped sample. The total length of the bangs is set on extreme strands, and the haircut is performed by the "strand". Little and pomp bangs can be given in another way - to make it two-level. The first level is cutting like this: the hair is separated by a horizontal vehicle, then trim up to the desired length. Typically, the length of the initial level does not exceed the middle of the forehead, and the thickness of each strand is 1-1.5 cm. After 1 cm, the second sample is made parallel to the first. You need to trim at the height of the first cutting line.

1.3 Factors affecting the choice of haircuts

The right choice of haircut will allow the hairdresser to adjust the disadvantages of appearance and pay attention to its advantages. Choosing a haircut as a basis for hairstyles, it is necessary to take into account the individuality of the appearance of a person, as well as the existing anatomical features, i.e. The choice of haircuts, the following factors define.

Shape of the head and face. Due to the fact that the forms of the male head and female are different, distinguished and haircuts: angular lines are dominated in men's haircuts, and in women - rounded.

Dimensions. Width shoulders, growth, complex, etc.

Border of hair growth. In men, for example, the hair growth boundary on the neck is lower than that of women, and the frontal notches are more pronounced.

Type and features of hair growth. Most often, the complexity of the haircut is observed on the top of the head, in the frontal and occipital parts of the head.

Hair density. In various zones of the head, the hair density is different. Usually less hair density behind the ear sink, in the bottom of the occipital zone, as well as in the zones of the frontal recesses and the crown. When choosing a haircut, this must be considered.

Height of forehead. For example, a high forehead must be covered with bangs.

Profile. There are three types of profiles: straight (perfect), which does not require correction; convex - with a serving middle part (in this case, the volume hairstyles on the forehead must increase); Went - with a protruding chin (in this case, a haircut is needed with a small bang, i.e. increasing the volume of hairstyles in the forehead area is not recommended).

Width of the back. The triangular edging of the hair on the neck, visually reduces the width of the backbone, and the straight line increases.

To perform haircuts, it is necessary to own the components of the hairdresser: knowledge different species Men's I. female Strizhek, main hair cutting operations and factors affecting the choice of haircuts.

Accordingly, the ability to cut it is knowledge of different types of haircuts, and not just knowledge, as well as the consolidation of this knowledge in practice. That is, you first need to know the information, and then practicing, without practice there is no skill in your hands.

Chapter II. Technology Hair clipper "Classic Kare"

.1 Tools and devices

To work the hairdresser, as well as any other specialist, is required whole line Tools and accessories. They can be divided into 3 groups depending on the purpose:

tools for combing hair;

haircut tools;

tools for curling and styling hair.

Combs.

We need three types of comb, each of which performs certain operations:

* Comb with a thin long handle (it is called "tail") - it is used to separate hair on the probes during a haircut, painting, chemical twist. It happens with a metal and plastic tip.

* Combination comb - teeth have an unequal step. On one half of the teeth are resolved, and on another quite frequent. It should be about 20 cm long, with a narrow web and have a narrow training.

* Comb with long rare teeth - for combing long hair or hair with a broken structure. It is also used to comb hair after a chemical curling.

* Brasing is a round brush. It is used when laying a hairdryer for raising hair at the root and tweaking strands. There can be different diameters.

* Skeletal brush - flat or curved brush with slots. Used when laying a hairdryer. It is convenient to raise the hair strands from the root. Thanks to the slits, hot air passes through the brush.

* Massage brush - a semicircular brush that gives hair a pomp. It is better to use a brush with metal teeth, because it is easier to disinfect. The rubber base on which the teeth are attached is mild, and the ends of the teeth are smoothly processed. For individual use, brushes with wooden teeth (subject to good teeth processing), as well as brushes from natural bristles.

Straight scissors. They must be made of high-quality steel and very sharply sharpened. The location of the fingers in their rings is the following: In one ring, the thumb, in the other - Unnamed, the same ring can have an enhancing lever to which the little finger is put. The size of scissors with straight canvases is indicated in inches (from 4 ѕ to 6 ѕ).

Thinning scissors. Such scissors have a teeth on their canvas, thanks to which the length of the hair at the ends becomes different. The height of the branch depends on the size of the milling tooth of scissors. There are one-sided and double-sided. The step between the teeth can be different than less often the step, the less hair will be cut.

Tip: When choosing scissors, you need to make sure that the scissors cannon adjacent to each other. To do this, you need to look at the light, the clearance must be missing. We work with scissors, their move should not be too tight or too free. Scissors need to be put perpendicular to the floor and take the first canvas perpendicular to the second, the shears can be left at half pastules. Scissors are better stored in a case.

Clamps and clarification.

There are plastic and metallic. They harde the hair that interfere with the haircut.

Must be made of heat-resistant plastic, have a cold air button or a hot air filter mode, a mesh air filter, a narrow nozzle, to be sufficiently powerful and have a durable and long electric pass.

Milling razor.

Milling razor can perform haircuts that differ in smooth lines and the completeness of the forms. And also, along with the module scissors, it is used for branch.

Spray.

Designed for wetting hair during a haircut.

2.2 Technology performing a clip "Classic Kare"

.The haircut starts from the bottom of the occipital zone. The horizontal vehicle is separated by a strand on the edge line of hair growth line and perform a straight or horseshoe edging on the neck. The next strand is separated by a horizontal vehicle if the edging line is straight, or a radial interview, if the edging line is horseshoe and cutting it by the "strand" method with an internal graduation. Thus, stick all hair to the central horizontal probor.

.Perform a haircut of the front-colored zone. The horizontal surgery on the temple is separated by the strand and take edging, focusing on the length of the hair of the occipital zone. All hair from two sides to the central vertical probor shifted by the "strand" by the "strand" with the inner graduation.

.At the request of the client perform edging on bangs. In this case, the edging line can be any. (Attachment 1)

.3 labor safety rules when having a haircut

Electrical safety rules

Electrical energy, as the most universal and easy-to-use form of energy, is a faithful assistant person in all areas of its activities. But electricity can bring and irreparable harm to the health of people, if you do not fulfill the rules of electrical safety and do not comply with personal precautions. The main condition for the safe use of electricity is the maintenance of electrical wiring, as well as compliance with precautions when using electrical devices in production and in everyday life.

Need:

Actions in case of fire

When a fire is found at the facility, employees are required:

immediately report this to the fire service (while clearly call the address of the institution, the place of fire, its position and surname, and also report on the presence of people in the building).

enable fire alert system.

take measures to evacuate people.

notify the head of the head of the institution or replacing his employee.

to organize a meeting of fire units, proceed with fire extinguishing fire extinguishing means (inner fire cranes, fire extinguishers, etc.).

If the fire occurs, the heads of objects are required:

lead a guide to fire to fire before the arrival of fire rescue units.

check if the fire service was reported on the emergence of a fire.

organize the evacuation of people according to the existing plans, take measures to prevent panic among those present.

organize the inclusion of a fire alert system.

- if there is a loud-speaking connection, declare a calm even voice about the need to leave the building.

to send the staff, which knows the location of the access roads and water sources, to organize a meeting and maintenance (if necessary) divisions of the fire service to the place of fire.

check the inclusion and operation of the automatic stationary fire extinguishing system.

if necessary, bring medical and other services to the place of fire.

- stop all work not related to the activities of the evacuation of people and fire elimination.

arrange the disabling networks of electrical and gas supply, technological equipment, ventilation and air conditioning systems (attract duty and service personnel for this).

- ensure the safety of people participating in evacuation and extinguishing fire, OT. possible structures, effects of toxic combustion products and elevated temperature, electric shock, etc.

organize the evacuation of material values \u200b\u200bfrom the danger zone, to determine the places of their storage and provide, if necessary, their protection.

Upon arrival of fire units, it is necessary:

sign the location of the fire and the shortest path to it to the head of the fire extinguishing the fire.

report finding people in the danger zone and course of evacuation.

provide indication of locations and accompanying to water supply sources, fire extinguishing and communications.

at the request of the head of the fire extinguishing, ensuring the involvement of the necessary autotractor, watering and other techniques.

to organize the work of members of voluntary friend and workers to assist firefighters during combat deployment, laying of sleeve lines, evacuation of material values \u200b\u200band conducting other works, according to the instructions of the head of the fire extinguishing.

When the official is included in the headquarters of the management of forces in the fire in fire, he is obligatory:

advise the head of fire extinguishing on the specific features of the burning building (facilities),

and also provide information on the presence and location of explosive and toxic substances, gas cylinders, electrical installations under voltage, and other information.

coordinate the actions of the service personnel when performing the tasks assigned to the fire extinguishing.

During the fire, it is necessary to refrain from the opening of windows and doors, and Taxis does not break the glasses. Leaving the room or the building, it is necessary to close all the doors and windows in order to reduce the inflow of fresh air that contributes to the rapid spread of fire. Portable lamps intended for hanging, desktop, outdoor, etc. equal when choosing a voltage to lamps of local stationary lighting.

Workers are required:

abide by the regime of labor and recreation established by the legislation, the rules of the internal employment regulation of the organization, labor discipline, comply with the requirements of the rules and norms of labor protection;

fire safety requirements, to know the procedure for fire, be able to apply primary fire extinguishing tools;

smoking only in specifically designed places;

Not allowed:

perform work being able to alcoholic intoxication either in a state caused by the use of narcotic drugs, psychotropic or toxic substances, as well as to drink alcoholic beverages, use drugs, psychotropic or toxic substances in the workplace or during working hours.

and do not observe personal precautions.

The main condition for the safe use of electricity is the maintenance of electrical wiring, as well as compliance with precautions when using electrical devices in production and in everyday life.

Need:

constantly monitor the serviceable state of wiring, switches, plug sockets, as well as cords, with which the electrical appliances are included in the network.

to connect to the network, use only plug connections.

include and disconnect the electrical appliances follows dry hands and only for the plug plug. It is not allowed to disconnect the electrical appliances by jerking for the cord.

replacement of lamps and dust cleaning lighting devices Perform only with a shutdown switch.

in the event of sparking, the appearance of smoke or smell of Gary, the sensation of the electrotock is to immediately disable the electrical appliance from the network.

at the end of the work, turn off all electrical appliances and turn off the lighting.

We comply with the safety rules when working with scissors:

♦ After serving each client, the scissors need to be disinfected in an ultraviolet irradiate or denature.

♦ Store scissors are necessary in the case in the top drawer of the dressing table.

♦ Transmit scissors followed by holding them for working web, i.e. Rings forward.

♦ Use scissors should be strictly as intended.

♦ When dropping scissors, you do not have to try to catch them to avoid injury.

Observe the safety rules when working with a razor :

♦ The razor should be stored in a case in the top drawer of the dressing table.

♦ Transmit a razor in a closed form in a case.

♦ When shaving, it is necessary to ensure that the head of the razor is directed to the acting parts of the face and the head.

♦ When shaving, you must be extremely attentive, you can not swing the razor and talk to the client.

♦ After serving each client, the razor must be disinfected in the ultraviolet irradiator or to withstand in a chlorine solution for at least 15 minutes. In addition, you must change the blade in the machine.

We comply with the safety rules when working with the machine:

♦ Before turning on the network, you need to check the cord object and the compliance of the supply voltage.

♦ Change knives only when the machine is turned off.

♦ You can not take the typewriter with wet hands and cut wet hair.

♦ You can not store the machine in the toilet drawer, it should be hidden in the workplace to avoid damage to the cord destination.

Observe the safety rules when working with the comb:

♦ After working with each client, the comb shall be disinfected in the ultraviolet irradiate or in a solution of chlorine (at least 15 minutes). With contamination, the comb must be washed with soap solution.

♦ It is necessary to ensure that the teeth are made are not very sharp and did not have burrs.

♦ You can not store the comb in work clothes pocket and leave the client in your hair.

♦ when working with chemical preparations It is forbidden to use metal comb.

Based on the above, you can draw the following conclusion:

To correctly perform a haircut "Classic Kare" you need to know the execution technology, select required tools and devices, as well as not forget about the rules of labor safety.

Kare is hardly the first hairstyle worldwide. Most often, women and girls choose a haircut. Each, at least once in his life, wore such a haircut. From a decade in a decade from year to year, a haircut of Karea is as popular and beyond any fashionable trends. Kare is always on top of fashion!

Conclusion

In conclusion, we will summarize the main results of research work.

Singing "Kare" from time immemorial to date takes one of the leading places. Based on "Kare" is performed a large number of different hairstyles. This haircut is found in Ancient Egypt. The hair was specially combed, lubricated with wax and incense and laid into the hairstyle. An extended "Kare" became like a business card of Egypt. This is reflected in drawings, inscriptions, hieroglyphs.

Thanks to the emerging new silhouettes and shapes of haircuts, hairstyles, a person acquires hope to fit the criteria of modern fashion.

In the process of writing research, I studied the basic operations of hair cutting and, directly, technology performing the "Classic Kare" haircut.

In my opinion, given the advantages and disadvantages of the client's face, you can pick it up with a haircut using any of the described haircut operations. And this haircut will delight him with his novelty and originality.

Kare is rightfully considered one of the most common and elegant haircuts. It combines simplicity and at the same time grace. Girls and women can safely choose this hairstyle, regardless of the features of the face, age and status. The versatility of this haircut is tested by a multitude of fashionistas, which, meanwhile, remained unique and original.

Bibliography

1. ON Kuleshova, O.B. Iltaeva, so-called. Butko "Basics of Design Hairstyles" - M., 2004.

E. Kurmanaevskaya. "Himself a hairdresser." - Rostov-on-Don, 2004.

N.G. Moiseev. "Art Hair". - Rostov-on-Don, 2004.

Wrong catalog "Estetica" №1 / 2005 (15).

application

The most sought-after service in the hairdresser is, of course, haircut. High-quality and beautiful haircutit depends not only by the qualification of the master, but also from many other factors such as: hair condition, view of the previous haircut, shape and type of face, makeup style.

When choosing a haircut, an experienced master takes into account the same mood, and even the character of the client, based on the possibility of creating a certain image of an acceptable to different situations, whether it is an ordinary trip to the store or dedicated to a festive event. In this article we will look at the main types of Strezhek And tell about how to create them.

In any hairdressing visitors will be offered two most popular types of haircuts:
- contrast made in the form of a sharp transition of hair length,
- not contrast Completed in the form of a smooth transition of hair length.

Contrast haircut photo Not contrasting haircut photo

Methods of cutting

When performing any kinds of haircuts, certain operations for processing head sections are made. Consider the mains types of Strezhek:
- smooth transition of hair length from central sites to shortened length in the neck and temple zone called no hair on "no".

Smooth, soft transition length on hair is initially short than in the first operation and made more thoroughly called "Stew".
- giving a certain relationship between short and long hairs on highlighted areas called "Milling".

Procurement of hair length all over the fingers called "Haircut on your fingers".

Haircut on fingers video

Forming a stepped shape, compatient strands at an angle called "Graduation".

Haircut graduation video

Careful hair drying to the backbone with a clear length of the transition line called "Smoking transition".
- the final stage of any haircuts to remove individual sticking hairs called "grinding".

All listed operations are necessary to obtain the selected style and hairstyle style. The present work of a professional master will be visible with the qualitative creation of an individual appearance of each visitor. Like ever in fashion now, individualism, in which the view and style of the haircut is brought to perfection directly on the client.

Directions and Styles Streams

There are several directions of individually applicable and widely used styles:

Style "Minimalism" It implies the creation of concise and strict lines with the appropriate strong and juicy hair color. The haircut has an accurate geometric shape.

Style "Romantic" It implies a haircut with soft and smooth lines devoid of any geometric lines. The haircut creates the impression that no means for laying was used, and luxury curls and unpaired strands are created by nature itself.

Style "Constructivism" - It is created by the design of clear and graphic lines, if there are incompatible and hair lengths.

The style "conservative" - It has simplicity and elegance. The haircut is performed with the individual selection of hair length.

Style "Youth" - Created by giving the hairstyle of special energetic. The effect of disheveled hair is achieved using the technique of execution and various means For styling.

Modern haircuts do not have strict and limited frames, thanks to which a professional master can change direction and style in the most optimal way. The most important thing for any master is to achieve such a result, in which every woman will leave the salon changed and smashing.

Kira Voloskova Expert on Volos

2 minutes

Hairstyle Specifies the image of a woman. She emphasizes the features and contour of the face, hiding errors. To learn to professionally perform haircuts, you need to master the technique of basic basic haircuts: solid (main), graded, uniform and progressive.

Women's classic haircut: benefits

Classic haircuts for women are considered universal. Their styling does not take much time and does not require special skills, but they always look neatly and stylishly regardless of the style of clothing.

It is the classic haircut that sets the basis for creating a variety of images, whatever hair length.

Performing a classic female haircut

Before proceeding to creating hairstyles, you need to prepare work tools: a classic comb simple and milling, hair clips, a pulverizer and a hairdryer. If necessary, you should wash and dry your hair.

1. Select the main strand. For this purpose, a horizontal strand of one centimeter thick is distinguished in the center of the occipital region by means of perpendicular samples. The latter is the length of hairstyles, taking into account the natural growth of hair on the neck.
2. The next horizontal strand is combed perpendicular to the head together with the crocated curl and is cut. The wizard adheres to the length of the main straight. So the entire bottom occipital area is sked. As a result, the hair will be longer at the bottom.
3. In the separated medium-sized zone, a central strand is highlighted, which is cut into lengthening to the pattern at right angles relative to the head. Thus, the entire zone is sked, and the previous strands protrude control for the following.
4. Gently fulfill the earpowder, holding the ear with a free hand.
5. Alternately separate and squeeze lateral temporal areas, while maintaining a straight out angle of hair outflow. After that, arrange whiskey.
6. Separate the bang area. Perform a haircut of a dark area. For this, the curl is separated near the face and is cut to the desired length. The whole dark zone is cut at right angles, along the length of the first control curl.
7. Run the transition between all zones, capturing the hair at once from two areas and remove unevenness.
8. Cut bangs, setting the required length and shape. At the same time focus on features of the face.
9. The ending step of the haircut is milling, which is performed by milling and straight scissors, resorting to the sliding slice.
10. To lay the hairstyle with a hair dryer and cosmetics.

Types of basic female haircuts

Classic basic haircuts are divided into 4 subgroups:

• basic;
• graded;
• uniform or uniform;
• progressive or elongated.

Features of the main haircut

The main classic haircut is distinguished by a smooth texture. Cocks around the neck shorter than on the theme. This haircut is performed using a constant control curl, along the length of which all hair is cut. A seating that can be smooth and inclined as a control line or pattern. The probes that are separated by the hair are strictly parallel to the edging. The angle of deficing in this haircut is not, and the curls over the ears will be cut without stretching.

Graduated haircut

Graduated classic haircut has many variations. It is inherent in the horizontal volume, the maximum of which is reached at an angle of 45 degrees.

Uniform haircut

Uniform classic haircut is distinguished by a dynamic structure and rounded outlines. Such an effect is achieved due to the same length of all curls, a permanent angle of delaying, equal to 90 degrees and the same angle of extension. Fingers with a haircut are located in parallel with the head, and the strands can be separated using horizontal, vertical or radial samples. The haircut is performed by sticking to the moving check, and each new curl acts as check for the subsequent.

Progressive haircut

This haircut is different elongated form With a dynamic structure. Bottom hair is longer than top. Characterized by a vertical volume.

Short classic haircuts

Classic haircuts are always in fashion, and their variety will help create an image of any woman. These haircuts can be performed on different length hair.

Care and laying of classic short haircuts largely depends on the experience of the wizard. However, ultra-screwed and complex haircuts need frequent adjustment - one or twice a month. Otherwise they will acquire a sloppy view.

Each haircut is characterized by individuality. Despite the fact that the classic haircuts are performed on the same technology: preservation of the volume of the head with a smooth decrease to the pattern, the masters can play with the texture hairstyle, adjusting the volume, the angle of raising, graduation and styles of the bang. Examples of such hairstyles can be seen in the photo of the classic shown below.

Hairstyle is selected based on how much woman thick hairwhich form of a skull and a facial type. Classic will look good on his head with an ideal outline, although masters professionals are able to hide all errors.

Classic Haircuts on Medium Length Hair

Classic is traditionally Bob and Kare. These are not requiring special care and distinguished by universality hairstyles always in fashion.

Bob is often chosen by busy and creative women, because they do not have enough time to keep track of the appearance. And this hairstyle does not need long-term laying, to give a neat form, there will be enough easy combing and spraying with varnish.

Care choose women with business style. Kare is distinguished by inside tips, having clear and smooth lines. This hairstyle may have an elongated, asymmetric, graded, smooth or curly structure, with the presence of bangs and without such.

Classic haircuts for long hair

The most common for long hair is classic which helps to change the style, keeping the length hairstyle. This haircut is often referred to as a ladder. She can revive the hairstyle, giving her a pomp and shine. And the presence of bangs will give the style of unusualness and refresh the face.

Photo classic is shown below.

The main task when performing a cascade is to comply with the levels and proportionality of steps. The hairstyle has many laying options, the more profitably different from straight and smooth hair. Also, the classic cascade does not need to be adjusted, because the growing curls do not lose accuracy and attractiveness.

Cascades go everyone, the main thing - to decide on the presence of a bang, which suits women with a high forehead and can have a straight and oblique forms as well various options Gusts.

A variety of classic haircut helps to create individual images and styles. Such hairstyles do not require special skills when laying and in care are also unpretentious.