As you know, you can create an unusual beauty of flowers, a variety of crafts and decorations from Foamiran. This master class contains detailed instructions with a photo on the manufacture of an unusually beautiful lily. Such a flower will become an excellent gift, because he will never start and there will be many years to remind a person about a significant event, and it will just delight the eye. Lilies from Foamiran can be easily made with their own hands, and step-by-step photos and a detailed description of the manufacturing process will only help you with it.

Mastery beautiful lilies from Foamiran in a step-by-step master class

For the manufacture of our lily, certain materials will be required. Perhaps some of them have at home. Nevertheless, some materials will have to be purchased, but believe me the result of it.

• Foamiran desired colors;
• Acrylic paints / pastel;
• Iron;
• Scissors;
• Toothpick;
• Wire;
• Thermocles / Super Glue;
• Marker / marker;
• Tip ribbon (green);
• Stamen.

Petals, perhaps, are the main detail of Lily from Foamyran. After all, mostly the beauty of the flower depends on them. For the manufacture of petals, we will need a template that can be made independently. The size of the template depends on the desired flower size. The template needs to cut 6 petals of our future lily. If the petals came out remembered not to be upset, when heated, the phoamyran has a property to be straightened.

Now it is necessary to give petals texture and shape. First you need to warm up the Foamiran, since it is precisely in the heated state that it becomes militant. Preheat material using a hair dryer or iron. After the petal is warmed up with the toothpicks to do along the leaf of the residence. Then heated the edge of the petal and make it wavy.

Using the wire you need to strengthen the petals. To do this, it is necessary to gently glue the wire to the outside of the petal, and then form it outdoor bending.

The next step is to paint our petals. For this purpose, pastel will suit well, as well as acrylic paints. Colors depend solely on your wishes and fantasies. In this master class, petals are painted acrylic paint. First of all, you need to scroll the base of the leaves, in our case, the gas paint is used for this purpose.

Now you need to paint the petals themselves. Color of paint / pastels can be any depending on your preferences. In our case, this is an acrylic paint of pink color. It is necessary to apply it strictly to the center of the petal, and then growing to the edges. Do not try to make all the petals are the same, because the real flower color is rarely ideal. So small inaccuracies only give the lilies of naturalness.

At this stage, the preparation of petals is completed. It remains only to draw small spots felt-tip pen.

The middle part of the lily includes a pestle and five stamens. For the manufacture of the stamens, the material is used for us - Foamiran (dark brown or black) and wire. Small pieces of phoamyran need to be glued to the wire. A tiphinka that will act as a pistil to buy in a specialized store or make yourself. To give the pestle additional stability, you can wind onto it with a wire. If you wish, you can paint the pestle and stamens with acrylic paints. In conclusion, fasten the stamens and pestle a green Type ribbon.

Optionally, you can make leaves for our lily from Foamiran. For this, the Foamiran is taken and leaves of the desired form are cut out of it. Then, as in the case of petals, the leaves are heated, and they are given the necessary texture and a wavy shape.

1) The first stage of the assembly is the attachment of three petals to the middle of the flower. Petals are applied to the middle and secure a tip ribbon. Then you need to straighten them well.

2) the next stage is attached by the remaining three petals. They are fixed and straighten through the same as the first three. It should turn out like this:

3) If you want to add leaves, they need to be attached to the latter flower. You can arrange them as you want.

Now that our Lily is ready for it can be a good gift for any holiday. Such flowers can be used as brooches or hair decorations. And of course, such wonderful flowers can be decorate any interior. Our lilies are never covered, but they are not inferior to real colors for beauty. It is important to note that not everyone can afford to keep the houses of real flowers because they are able to cause allergies. If you are in the number of people, then Flowers from Foamira will become an excellent alternative to real colors.

Video master class for beginners on the subject of the article

Especially for beginner needlewomen, who may have difficulties and questions on the manufacture of lily from Foamyran, in addition to our article presented detailed video master classes for the manufacture of this wonderful flower. We wish you all creative success!

It is difficult to fulfill, but a very charming flower of Foamiran, we will do in this master class. Lily is made with their own hands long enough and not easy, but the result is worth it. Lily from Foamiran is very similar to a living flower, especially if they are made of fashionable in the last time of the thinnest marshmallow. Lilies look great in bouquets with many colors: roses, peonies, orchids, anemons, chrysanthemums, gerberas, etc. Also lilies are good as a decorative element of the wedding hairstyle, so this flower I decided to fix on the heel.

This master class will consist of several parts:

Master class on Foamiran: Lily Twig, Photo Step.

• we will also make a flower of lily from Foamiran on a hairpin / stud;
• and in conclusion, I will show you how to make water lily from Foamiran.

Lily Bud from Foamyran: Master Class with Photo

What we need in order to start making lily bud and the assembly of a whole twig of this wonderful flower from Foamiran.

• flower of lily from the Foamiran, which we will do below;
• white and green foamyran;
• orange chopstick for manicure;
• thin and thick wire;
• hot glue, as well as glue universal or second;
• oil and dry pastel pink and green shades, wet wipes and sponge;
• teip-tape.



To create a lily bud from Foamiran, we first make a basis of the foil. Size can be varied as desired. We all need a few such bases for buds, as we will then collect a whole branch of lily.



On the base of the foil, we apply three strips of hot glue and let them cool.



Then you need to take a piece of white phoamyran and enclosure the base.



Here is such a bud we turned out. We spend it with a pink oil pastel and tip we treat Tape ribbon.



Here, I prepared such buds for my twigs.



From the green phoamyran, cut out the leaflet. You can make them different size. But calculate the number of leaves, near each booton and the flower you need to place 2-3 sheets. Since I will put a bouquet in a bouquet, then the leaves will be fixed only under the buds. If you just want a branch of lily under the flower must be the leaves.



Wand applied leafy leafy.



We take two types of oil pastels and toning a piece of leaf with a sponge on both sides.



The edges of the lily leaves are slightly stretching a little, turning the sheet in half.



Along the sheet we glue Litons.



Since Lily, the trunk is not thin, but I do not have such a thick wire, I use the coil sticks. Well fixing the wire with a bouton into it.



Before starting to fix the leaflet, we slightly proton with green pastels buds and a cup. Make 2 - 3 turns Tape ribbon and apply leaf. Then wrap the sheet and after the sheet we make 2-3 turns.



Then we apply the second sheet and secure it on the first sheet. We do 2-3 turns again.



So continue to mount lily buds. Their quantity will depend on what twig you would like to get.



Then secure lily flower. The amount depends on the size of your branch and on your desire.



Well, such a lily twig did me result in this master class. It consists of three lily buds and two flowers.

I also have an interesting master class on you on how to make a lotus from Foamiran, which is often called water lily.

Flower of lily from Foamiran on the hairpin: master class with photo

We begin to make an elegant lily flower from Foamiran in white and pink color scheme.

To begin with, we will define the source materials that we need for the manufacture of lily.

• white and brown foamiran;
• mold;
• iron;
• pink dry pastel and wet wipes;
• acrylic paint bright pink;
• thin brush;
• thin white wire (for Lithons);
• glue (instant or universal) and PVA;
• ground coffee;
• white Teip-tape;

Master class: how to make Lily from Foamyran, step by step photo

At first I will show you the finished lily from Foamyran, and then lay out step-by-step photos with comments.



Here is a color of Lily from Foamirant called "Owliya" and we will do in this MK. Burn it on the hairpin. Of course you can buy stamens and pestle for a given flower in advance, but I will show you how to create a flower with my own hands from the Foamyran.

Pattern of Lily from Foamiran



Here is a pattern of lily from Foamiran we will need. For one flower, we need only 6 petals, of which 3 small and 3 large. The strip of white phoamyran 1 cm. * 6 cm. The white triangle, for the convenience of the pistil formation, take 3 cm. And a droplet of brown phoamyran 1.5 cm * 0.5 cm.

We make lily petals from Foamyran



Petals and pestle cut out of white phoamyran. The base for the stamens of the brown. All is ready.



We begin processing petals. All petals are processed equally, at the beginning heated on an iron at a temperature of silk-wool and process on the Molda. If there is no Molda, heat the petals on the iron fold the harmonica a little over the way between the fingers, for thinning the petals, and then put the texture and then apply it with a wand.



Tinging petals Pale pink color: 2/3 Petal on both sides. I tone dry pastel with a wet napkin.



Then the acrylic paint applied the specks-dots, on all petals. You can apply a thin tassel or tongue to the toothpick.



Then we continue to handle all the petals on the iron. Heat myself the tip of the petal, clamp it and pull out a little down. Then he warmed the end of the petal on the end of the iron and make a small wave, as if we swear the petal, one side of the petal turn to yourself, the other from ourselves.



All petals are glued to Litons, we applied glue to the tip of the petal of 1.5 cm from the front side and we apply Liton, then clamp.



We take the workpiece of the triangle and so bend.



In bends, we put glue and clamp well.



We took the workpiece of the triangle to more so that it was convenient to form the base of the pestle, and now it is superfluous to cut it, like this.



For the pestle itself, we take a wire 7-8 cm and a piece of phoamyran 0.5 cm * 6 cm.



Welcome wire with glue and wrapped with foamifra. Excess Foamiran cut and scroll through the wire or ride on the table so that the pestle's leg becomes round.





On the blanks for the stamens in the middle of a wand draw strip.

Making Lilies from Foamira



Then we put glue into this strip and glue Litons, clapping well.



We take PVA and ground coffee glue (only not in soluble, it's just a jar from under it). Focus the head of the stamens in the glue, then in coffee. We put to dry, you clean up too much.



Stamps stick to the pestle, having them slightly higher.

Collect the flower of lily from Foamiran



At the beginning we glue small petals, in the form of a triangle, having them above the stamens. All petals are at one level in height.



Then, between the petals of the first row, the large petals are barely lower than small, but in height at one level with them. Here is such a wonderful lily from Foamyran we turned out. You can make several colors and collect a composition or a bouquet for the bride. But we will make decorations with you for wedding hairstyles - Lily on the hairpin.



Lill Lily, the place of fastening of petals and pestle with stamens process a teip-ribbon 1.5 - 2 cm., In several layers (as it were, creating a lily sewer). All the remnants of the wire from Lithons are cutting up, we leave only one from the pestle and take a big hairpin.



Wire remnants from Lyton and one side of the stud connect, whining a Teip-ribbon 2 cm. That's all the decoration from Foamiran for hair is ready.

Water lily from Foamiran: MK with photos

Let's start a master class on the manufacture of a charming water lily from phoamyran from the finished sample (see photo).



For this master class on Foamiran, I needed the following materials:

• foamiran white, green and yellow and a small piece of pink;
• yellow, pink and several green shades of oil pastels, as well as a sponge for a decisive;
• mold Clematis;
• foil;
• adhesive Second;
• scissors;
• acrylic glossy varnish at will;

Foamiran Water Lily Template


According to the pattern, we prepare templates for the manufacture of such a wonderful flower.



From the green phoamyraner, we cut 3 leaflers with a diameter of 10 cm.



I apply a sheet with a wand.



We apply tinted with the front side of the sheet, as Lily will be used to decorate the pond in the garden, the bottom of the leaves can not be toned. For tinting, we use several shades of green pastels.



Also cut out the green leaflers for a cup. Size 7 cm * 2.5 cm. Cut from 6 to 8 pieces.



For tinting, we use several shades of green pastels, as the Foamyran is very bright.



Then the leaflets are processing on an iron at a temperature of silk-wool, we fold them in half and stretch the boat.



Flower petals cut out of white phoamyran.



The bottom of small petals with toning oil bright yellow pastel on both sides.



Then a wand on small petals we apply a texture.



The top of the petals toning a slightly pink pastel. Toning is applied on both sides. The end of the petals is also toning.



Large petals process on an iron at a temperature of silk-wool and well pressed on the Molda.



Then slightly toning on both sides with pink pastels.



We take two strips of white phoamyran 18 cm. * 3 cm. And one strip mode is thin fringe, the second fence.



Tinging stripes bright yellow pastels from two sides leaving tips white. Then pink pastel toning the tips of the fringe and the fear.



Then the stripes process on the iron, so that the tips are a little bent.



We take a piece of foil 10 * 10 cm. And form a ball for a middle of a flower.



We take a piece of pink phoamyran and tighten it.



Put the ball covered with foamifra.



Then the ball is gluing. Baccho stick at one level.



Bully below, we glue the fence, too, with glue at one level. I take the fence so that the cilias look out.



Then we glue small petals. The first row glue 7 pieces, glue next to each other. The second row between the petals of the first row. And the third between the petals of the second row.



Large petals glue to the bottom of the base in a circle.



Then we glue the leaflets of the chashelistic, also in a circle. One next to another.



We collect leaves next to each other and glue them. And in the middle of the leaves glue the flower.



Here is a flower called water lily and we have done.

White Lily from Foamiran

Since it is possible to make flowers from Foamyran all varieties and species, try to create an incredible and very gentle lily, which can be a beautiful decoration for your hair.

In its creation, there is absolutely nothing complicated and you will definitely cope.

Prepare to a new master class!

Today we will wonder without a glue gun!

We will need:

• white and green foamiran,
• white strong paper
• a little thin wire 0.4 mm - for stamens and 0.8 mm - for the pestle,
• cotton pad,
• white Teip-tape,
• manka painted with yellow acrylic paints
• toothpick,
• green pastel chalk
• wet wipes,
• transparent universal glue "Moment",
• iron,
• scissors,
• hair spray,
• hairpin.




Step 1: Stamens and Pestik.

For stamens and pestle, I have already wrapped the wire with white strong paper.



We will need 7 years, 6 years for stamens - wire 0.4 mm, 1 - for a pestle, slightly thicker, 0.8 mm.

We take a cotton disc, disconnect it into two halves.



We cut half a half into 2 parts.



Very tight begin to wrap around Letton.



That's what happened!



Take a white teip-tape. Since the tape is wide, cut it along.





Wrap a blank, retreating, approximately 3-4 mm from the top edge.



Now you need to make a cotton tip in glue.



And in the colored acrylic paint seal.



Now make stamens.



Letters bend, it turns out approximately the letter "T".



Focus first in glue, and then into the semolina.





Step 2: Petals and leaves.

Cut from Foamiran 6 petals of the desired size in the form of an ellipse, but with pointed ends.

The template is presented in a large value, you can copy, print on a sheet of A4 sheet and print.





We glue the letons to the petals, retreating from the edge of 5 mm.





From the green foma, randomly cut out 4 leaves.



Starts toning.

We will be toned with a "wet" way.



A wet cloth to spend pastels on shallow.



Napkin with green tone, stain all the petals on both sides.



These are the following, very gentle!



Heat processing: only the edges of petals applies the iron!



Petals wound with your fingers, and the heated leaflets twist!



Stamens and pestle also ponify green pastels.





Step 3: Collect the finished white lily flower.

Pestik and around the stamens, wrap a teep ribbon.



To the middle add 3 petals that are sewn.





And 3 more in the intervals of the first.



Petals, unfolds, so that they would be with each other.







Cut off the extra tails of the wire.



Cut the square of about 1.5 / 1.5 cm.



Remember him and twisted.



Printed him to the "ass" of the flower.



Insert the hairpin between the petals.





To very little sprinkle with varnish, fasten our tint.



The flower came out not large, to larger, it is necessary to increase the log.



Our lily in all its glory!





Thank you all for your attention!

Creative success in creating flowers! I will be very glad to see the photo with the works made on this master class!

Create detailed master classes with step-by-step photos and video instructions.

Master classes on needlework











Flowers from Foamyran, Master class "Lily"

Flowers from Foamiran. Master class "Lily"

Here is such a beautiful woman ...

Subscribe to my blog: "Flower School Svetlana Popova" And get new MK directly to the mail!



Prepared to the master class. Today we will go well without a glue pistol.



Here is the pattern of petals, you can use it.



For stamens and pestle, I have already wrapped the wire with white strong paper. We will need 7 years, 6 years for stamens, wire 0.4 mm., For a pestle a little thicker 0.8mm.!



For the pestle, we take a cotton disk and divide it into 2 layers:



Cut half a half for another 2 parts:



Very tight start wrapping years.



That's what happened.



Take a white tape tape ...



If the tape is wide, then we will cut it up.



Wrap a blank, retreating from the upper edge of about 3-4 mm.



Now you need to make a cotton tip in glue.



Then Makazy in the painted in advance of the gun.



Now make stamens.



Bend the letters of the letter "T", as shown in the picture.



Jump first in glue, then into the semi.



This is what the finished stitch looks like.



We supply patterns and cut out.



We glue the leaves for letters, retreating 5mm from the edge.





From the green chest cut out 4 sheets in arbitrary form.



Prondeaded to tint. Tinnate will be wet.



A wet cloth to spend pastels on the shallow ...



Then this napkin stains the leaves from all sides.



This color turned out, very gentle.



Thermal processing: Apply only the edges of petals.



Petals wound with your fingers, and heated-wish.



Stamens and pestle toned green pastels.





We collect the stamens around the pestle and turn the Tape ribbon.



The middle adds 3 petals that are sewn.





And 3 more in the intervals of the first.



The petals are deployed so that they were with each other.



Now we will do leaves.







Cut the square of about 1.5x1.5 cm.



Remember him and twisted.



Printed him to the "ass" of the flower.





Insert it between the petals.



Very slightly sprinkle with varnish, fastening our tint.



The flower came out small if you need more, then just increase the pattern.



Here is our lily in all its glory! I wish you all creative success, your Svetlana Popova!

masterrukodelia.ru.

Master class Lily from Foamiran


Good day, dear guests of my site.
Not so long ago, I was fascinated by a new interesting material - Foamiran. And as a result, a new heading was born - products from Foamiran. Where I share some of my ideas and secrets. Today I will tell, or rather - I will show how I make Lily from this material.
Creating this flower, I enjoyed a variety of technicians. Also combined all their knowledge of Flowelia. I used skills in the manufacture of silk flowers, colors from satin ribbons, and the standard heat treatment of the Foamiran itself.
You can see the lesson how to make a lily of the fabric and lily from satin ribbons.
Since the process of creating this lily is quite difficult to describe and show in the photos, I made a video master class, which consists of three parts:
1 part - Pattern and staining of petals
2 part - processing of petals
3 Part - Collection of Flower

1. Foamiran Foameva.

2. Adhesive Pistol

3. Cretaged paper

4. Acrylic paints

Length Length Template 7 cm. Width 4 cm

Template for stamens 1.5 cm. Width 0.7 cm






Deti-mama.com.

How to make a terry Lilia "Fata-Morgana" from Foamyran

These lilies are unique among terry lilies. They are large in size up to 16-17 cm, as well as they have many petals, up to 12 pieces, and still this variety lilies have no stamens, but there are only pestles. On the petals on 1/3 dark red crap.

• foamiran (yellow);
• paints (I have pastel and acrylic);
• floral wire №26;
• floristic Mold;
• artistic brush (№1);
• teip-tape (yellow);
• termoklay;
• second glue;
• pliers;
• scissors.

Pestka manufacturing

Let's make a pestle. Take 3 segments of the wire of 8-9 cm each.

Pliers from one edge to run small loops 3-4 m, and the hollow is perpendicular.

Moving the segments of the wire, so that they resemble the pestle. Corrently twist.

Now take the yellow tep-tape, we will cut it in half and wrap it with a wire, about 4.5 cm (a teip-tape can be replaced by a Foamiran strip 0.5 cm).

Then make a chips from a pencil of dry pastels (dark red and green) and toning the pestle: the bottom of the pestle is green, the top of the pestle is dark red.

Production of petals

Now we will proceed to the preparation of petals. Consumer cardboard cutting patterns of petals 1,2,3,4. Template patterns: 1 - height 6.5 cm, width 3 cm; 2 - height 7.3cm, width 3.5 cm; 3 - height 9cm, width 4 cm; 4 - height 9.8 cm, width 4.5 (the size of the petals will depend on whom you want a flower in diameter; I eventually got a lily 14-15 cm in diameter).

Cut from yellow phoamyran petals. For the manufacture of one lily, we will need 3 petals of each species.

Take the green pastel and wet cloth, proton all the petals at the base, on both sides.

Now we will handle our petals with iron and mold. Each petal applies to preheated iron for a few seconds, and quickly has not cooled to floral moldes, and we press the texture with your fingers along the entire length.

These are such textured petals should turn out:

Now we take the dark casual acrylic paint and the finest brush. Apply Krap on 1/3 part of the petal. Let's give a little time to dry. So we do with all the petals.

Then, a little bit from the edge, as in the photo and doubt the top of each petal. And also twisted the edges with your fingers, you can not even have any petals. And the smallest petals (№1) will lay down along and twist a little.

So do with all the petals.

Build a flower

We glue the petals number 1 around the pestle, having them evenly in a circle, a little bit. We try to stick the petals as vertically as possible. The glue is applied on the base of the petal (still a little secret - the first row is better glued on the second glue, because it may not be glued with glue from the adhesive gun, then it can be thermoclaim).

Then we glue the petals No. 2, having the intervals between the first, they also have vertically, and of course we look at the petal position.

The reverse side of the flower, after the lining of the petals number 2:

Now we glue the petals number 3 and 4. The petals are glued at the base, a few millimeters lower than the previous ones.

The reverse side of the flower, after the lining of the petals №3 and 4:

If you do not need a wire for further build, it can be cut off. That is our terry Lily "Fata Morgan" and ready.

Patterns and applications

Getting cuts available only to registered users.

Foamiran Lily: Master Class

From Foamiran, you can create different unusual crafts, jewelry and, of course, gorgeous flowers with their own hands, they are very cute and interesting.

And now we will analyze the master class on creating a lily from Foamyran. Such lilies from Foamiran will be the best presentation for any celebration.

There is nothing hard in the manufacture of a bouquet of Foamiran, you just need a little bit of patience and, of course, the material itself. First, we learn what Foamiran is, and where it can be bought.

FoamiranIf you just say, this is a flexible suede material, he simply remembers how you would try to do.

You can find such a unique material in a special fabric store, or anywhere to work with creativity and needlework. The material is fully affordable and at an affordable price, it ranges from 60 to 100 rubles.

Gallery: Lily from Foamiran (25 photos)

How to create a white lily from Foamyran, a detailed master class

For beginners, the most fascinating will create a flower of phoamyran. To begin with, we use step-by-step recommendations and execute a master class for beginners in this matter.

To create a flower from Foamiran, it will take:

• Foamiran leaves (white, brown, green).
• Small scissors.
• Wire.
• Foil.
• Good glue.
• Pastel of different colors.
• Coffee.
• Trep ribbon.
• Tassels.
• Toothpick.
• Sponge.
• Acrylic paint of different shades.
• Iron.

These are the main materials, for sure, in the process of creating lily will also need other materials.

From Foamyran, you can make different toys, ornamental products for home or clothing, however, the Foamiran is gaining serious popularity in terms of colors.

After all, only from Foamiran, created by their own hands, flowers will look like alive.

Special Pattern for Lily Foamiran, Master Class



First you need to create pat.. To do this, we will define the sizes of our lily. If we want bulk lily, then, respectively, the petals should be large.

For one flower, we will need:

• Seven petals, of which are three large and four small.
• One strip with sizes 1 centimeter for 7 centimeters.
• Triangles with sides are two centimeters.

These are composite particles of a conventional garden flower.

But for water lily we it will take:

• Three large green leafs, which look like a mandarin slide, with a diameter of somewhere 12 centimeters.
• Seven pieces of white petals.
• Twenty smaller pieces.
• Two strips of white phoamyran with sizes nineteen cm for two cm.

To get a lily bouton, we will need all carved composite particles of lilies to decorate and attach.

Decacts of lily petals in any color, however, if we want to achieve realism, then Lilia is most often white-pink, in "freckles".

Then white petals cut from Foamiran, decorate the center of pink pastel or acrylic, who will like it, do not forget that there, where the petals are fixed to the bud, its color is light green. So we disassemble the beginning of the master class.

What will make a template for lily from Foamira

The flower pattern from such a material will serve a real ordinary lily, but if it is not, then you can do a simple picture of the flower. Carefully seeing a live flower, its shape, color and number of petals, stamens, create a pattern from any paperwhich will be at hand. And after that, already created templates, petals and leaves, we will apply to the Foamyran, we will approve and cut. Templates lay out in such a way as to spend less material.

Operating procedure:

Freckles easier to put a brown, bright red marker or a thin brush dipped in brown paint. Leafs for lily cut out of the green material. However, there are no such flattened leafies and petals in real lily, it will take iron to create waves and irregularities.

We warm up the iron at a certain temperature. Take carved leaves and petals, and under them we will lay a folded towel several times, and the irons will turn their edges.

Flowers from this material are suitable as decorative products in everyday life, for example, it is possible to secure such a lily on the clips for the curtains, which will be very elegantly combined on the sides of the boc.

Also these flowers can be made in silver color, which can serve as a decoration for the New Year's Christmas tree.

Such Lily can be glued to the postcard on the eighth of March the beloved woman, sister, mom. Also, crafts from Foamiran are perfectly suitable for hairpin or on hair rim. I will fasten such a lily on the hairpin instead of a long stem, screw the hairpin thin wires. And the water flower is easier to glue the rim.

Making lily boutons with your own hands

For the stamens you will need a thin wire, the tips of which can be punched with small brown pieces of phoamyran, and for greater realism, the tames of the stamens by hide in the glue and sweep the soluble coffee, leaving for a certain time to dry. When the stamens get dry, we will begin to screw them off to a larger wire, it may be created from a few thin wires part. This will later serve as a flower barrel.

In the middle of the bouton, you need to decompose one white big chuckle. It can be created by gluing the material around the same wire. Next, we collect the flower. After that, in a checkerboard, we glue the petals around the stamens. Initially, small petals, then bulk. You can glue them by teep-ribbon or super-glue.

For their manufacture required:

• Make the base of the foil on the wire in the form of oval.
• To deceive it with glue and with a white material.
• Foamiran to change your fingers to impart irregularities, like a real non-scratched flower.
• Then you need to paint the pink pastel or pink acrylic a little at the base.
• On the end of the bouton, glue a green teip-tape.
• On the flower trunk, gluing also green leaves.
• The leaves are fixed from the bottom, glue their super-glue to the tonny wire, and then wrap the flower barrel.
The benefits and harm for the body of aloe juice there are many medicinal plants, the beneficial properties of which are known since a long time. Aloe Vera juice is widely used - its benefits and harm are well studied by modern medicine. This plant can be grown at home - and will always be at hand [...]
• Zamiculkas: Care at home, growing, reproduction and transplant There is a legend that this plant brings wealth to the house. Caring for Zamiculkas at home is very simple, therefore it is not surprising that this bush has become loved by flowers for his unpretentiousness and [...]
• Yellow Garden Lily, what to do garden lily - a plant that was previously considered by the Royal Flower, and today it became the favorite decoration of many flower beds. Thanks to the work of breeders, the exquisite and noble lily acquired a variety of shades, the Lilyniki did a real "highlight" [...]
• Aloe injections in gynecology Anti-inflammatory properties of the plant under consideration are widely used in the treatment of respiratory diseases, gastrointestinal tract, eye and skin diseases. In this article, consider the use of aloe injections in gynecology. Aloe Extract [...]

Interesting crafts, beautiful flowers, jewelry can be made from the most ordinary phoamyran. Such products are unusual and beautiful, they can conquer any heart. In this article, we propose to create royal lilies from Foamiran.

Original idea

The process of manufacturing lilies can be traced on the example of the next master class with step-by-step photos. For work it is worth preparing a Foamiran, pastel pink, lilac, yellow and green shades, scissors, toothpicks, iron, wire, fabric, markers and adhesive gun.

First of all, draw lily petals on tight paper or cardboard. Cut out the workpiece. To create one full-fledged flower, you need to take six blanks. If you want to make a bouquet, you will need more details. Then you must draw from the petal template and cut the blanks from the Foamiran.

Next, we need to paint the petals. This can be done with the help of pastels, acrylic paints, pencils or other accessories. The color depends on your own desire, you can leave the petals whites and make a beautiful white lily. In our case, we score petals as shown in the photo.

If you paint the petal, do not forget about the opposite direction. We paint it ordinary pink color.

Now proceed to work with the front side: Tinging Pink, and then add a little lilac color.

Here are the petals:

Now take the pastel of green and begin to make the base as shown in the photo.

We apply a little yellow shade.

Note! At this stage, the petals should receive some kind of texture. To do it, it is necessary to heat the petal using an iron and then spend a wooden wand over the workpiece.

Making a streak.

That's what should go out in the end. If you have Mold, use it.

To give some kind of waviness the leaves, which is shown in the next photo, it is necessary to warm the edge of the petal.

These are such beautiful workpieces. When you make all the details for a full lily, then you can start the flower assembly. Flomaster draw dots on the petals.

Then the brown felt-tip pen give a liqueness of the flower.

No lily can do without stamens and pestle. To create them, take a thin wire, the chopstick of the black color and a large stamp.

We glue the pieces on the wire, then we wrap it with a chip. With the help of acrylic paints, give the necessary color to the billets.

Now you can make leaves. It's very simple! Cut from green foamyran the required number of leaves, then heated them on an iron and draw the tendon with a wand.

These are the details we have.

Between themselves alone already prepared stamens and pestle. Then of the three petals form the first row around the glued parts.

Asmetrically glue the second row.

From the reverse side, cut off the extra pieces of flower.

There is nothing difficult in creating a bouquet of Foamyran, you just need a little patience and, of course, Foamiran himself. First we will get acquainted what a Foamyran is, and where it can be purchased. Foamiran, if simple words, is a plastic suede material, it easily remembers the form that he would not be given. You can get such a miracle material in the fabric store, or at any point for creativity and needlework. The material is very affordable and inexpensive, the price fluctuates on average from 60 to 100 rubles.

For beginners, the most interesting will make Lilies from Foamyran. To begin with, we will follow step-by-step advice and we will produce a master class for beginners in this matter.

To make Lily from Foamyran, you will need:

• Foamiran sheets (white, brown, green);
• Small scissors;
• Wire;
• Foil;
• Glue (moment, second, hot);
• Pastels of different shades;
• Coffee;
• Trape tape;
• Brushes;
• Toothpick;
• Sponge;
• Acrylic paint of different colors;
• Iron.

These are basic materials, for sure, other materials will also be required during the manufacture of lilies.

From Foamiran, you can make various toys, decorative elements for home or clothing, however, the Foamiran in the manufacture of colors, which is engaged in Lily Krenzler, is gaining great popularity.

After all, only Flowers made from Foamiran, will look "alive."

Required Pattern for Lily Foamiran

First you need to make a pattern. For this, we are determined with the size of the future lily. If we want a big lily, then, respectively, the petals should be large.

For a single flower will need:

• 7 petals, of which 3 large and 4 smaller;
• 1 strip with dimensions 1 cm by 7 cm;
• Triangle with parties 2 cm.

These are composite parts of a simple garden lily.

But, for water lilies, it will be necessary:

• 3 large green leaf reminiscent of mandarin slide, with a diameter of about 12 cm;
• 7 pieces of white petals;
• 20 pieces are smaller;

To get a bud of lily, we need all carved composite parts of the lily to decorate and connect.

Decoration of lily petals can in any color, however, if we strive for realism, then Lily is usually white-pink in "freckles".

So, white petals carved from Foamiran deactivate in the middle of the pink pastel or acrylic, who, as you like, do not forget that where the petals for buds are attached, its color is light green.

What makes a template for lily from Foamiran

The real living lily of the Lily of Foamiran is a template, but if it is not, then you can use a simple picture of lily. Carefully examined the living lily, its shape, color and number of petals, stamens, make the pattern from any paper that comes at hand. And then we have already received templates, petals and leaflets to the phoamyran, we supply and cut out, and the templates lay out so as to spend the phoamiran less, as much as possible in the case.

Procedure:

1. The freckles are easy to put brown, bright red felt-tip pen or a thin brush moistened in brown acrylic.
2. Leafs for lilies cut out of green foamyran.
3. However, there are no such smooth leaflets and petals in real lily, to give rise and irregularities, they need iron.
4. Heat the iron on the average temperature.
5. We take the carved sheets and petals, and under them put the towel folded several times, and iron stroke their edges.

Lilies from Foamiran are suitable as decorative elements in everyday life, for example, you can fix such a lily on the clamp for the curtains, which will be very beautifully combined on the bokes of the assembly.

Also such lilies can be made in silver color, which can serve as a decoration for the New Year's tree.

Such Lily can be glued to the postcard on March 8 to your girlfriend, sister, mom. Also, Lily from Foamyran are well suited to the hairpin or on the hair rim. Fasten such a lily on the hairpin easily, simply, instead of a long stem, screw the hairpins with thin wires. And the water lilies easily glue the rim.

We make a bud of lily from Foamirana on their own

For stamens, a thin wire will be required, the ends of which can be enclosed with small brown pieces of phoamyran, and for greater realistic, the ends of the stamens are loose in the glue and swell by soluble coffee, leaving for a while dry. When the stamens are dry, they begin to screw themselves to thicker wire, maybe it will be bound from a few thin wire variation. This will serve as a trunk of Lily.

In the middle of the bud, it is necessary to place one white thick chip. It can be done by placing phoamyran around the same wire. Next, we collect a lily flower. It is necessary to glue the petals around the stamens in the chess. Initially, small petals, then big.

You can glue them by teype-tape or super glue.

No need to forget that in the bouquet of living lilies there are unpassed buds.

To create them, it is necessary:

1. Make the base from the foil on the wire in the form of an oval.
2. Then they fractose it with glue and are covered with white foamifra.
3. Foamiran people with your fingers, to impart irregularities, like a real inconspicuous lily.
4. Then you need to paint the pink pastel or a little pink acrylic at the base.
5. At the tip of the bud with glue Green Teip-tape.
6. On the trunk of lilies also glue the green leaves.
7. The leaflets are fastened from the bottom, that is, we glue the super glue to the thin wire, and then we look at the lily barrel.
8. Wire can be punched with teep tape.

Well, by making a couple of such colors, a bouquet of lily is ready!

Water lily will require for manufacture:

• 3 large green leaf diameter 12 cm;
• 7 pieces of white petals and 20 smaller pieces;
• 2 strips of white phoamyran with dimensions of 19 cm by 2.5 cm.

Toothpicks scratch the veins of the sheet, and we apply a pigment with a sponge, or dry pastels of different green shades. We also cut 7 small leaves with dimensions of about 6 cm, deactivate them into a green color, and pull them out on the iron, folding in half. The petals cut out of the white sheet of phoamyran, the bottom of which stain in the bright yellow color, and up in the pink color of pastel or acrylic paint. It is also necessary to scratch the petals to pull the relief. Two white strips cut from the phoamyran, it is necessary to cut in the form of a fringe, squeezing the bottom bright yellow color, and up pink. Then it is necessary to process them with iron so that the fringe is braking in different directions. Then we make a ball from the foil, and glue it with a white or pink foamyran, and later the resulting ball is backed by stripes with a fringe. Bahroma in the middle bend so that the ball was not visible, and on the sides of the fringe bend so that later she was lying on the petals. Then in a checkerboard glue petals, and glue the flower to large leaflets that did at the beginning.

Lily from Foamiran: Master Class (video)

You can also make a blank for dahlia, orchids, chamomile from Foamiran, everything is on personal taste. You can not only make a simple bouquet, but also topiary from flowers from Foamiran. Also, instead of flowers from Fomior, you can make a lot of little bears, and collect them in a bouquet that is now very fashionable. So dare, do not stop there, experiment.

Fom-floristry is the manufacture of decorative colors from plastic suede (Foamiran). These flowers are so realistic that they are superbly replaced by alive. They are used in the decoration of the interior, compositions and hair ornaments. Fom-floristry - the occupation is very expensive. To create a realistic flower, you must have: paints, foamyran, moldes, patterns, stamens and much more. But knowing some secrets, you can do almost half tools. Today we want to show how to make Lily from Foamiran without the use of Molda.

Materials and tools for the manufacture of lily from Foamiran:

• - white and olive Foamiran;
• - White and green tape tape;
• - thin wire;
• - Pastel (yellow, brown, orange, green, herbal greens);
• - Adhesive Second, eg, Cosmofen;
• - a piece of sponge from washing dishes;
• - Manka;
• - toothpick;
• - scissors;
• - Iron.

If you look at the Lily flower, then besides six elongated petals, you can see one pestle and six stamens. Petals and leaves we will do from Foamiran. And where to take a sticky and pestles? - you ask. They, of course, can be bought in the store. But since we decided to do without excess spending, then the chuckles and pestles will also do themselves. And let's start creating lily from them.

How to make stamens for lily from semolina

Stamens. Cut off six pieces of wire with a length of about 7 cm. We take a narrow white teep tape, stretch it.

Watch up tightly wire.

We begin one end (0.5 cm).

We retreat from the curved end of 0.5 cm and bend the wire (in the other direction).

We reject now a long end at an angle of 90 degrees. For better realizing what we do, in the photo lines are shown all the way.

Pestle. Cut from about 7 cm wire and wind it teip-ribbon. First, you wind one end until we get a small ball, then go down. When you go down to three centimeters from the work end, we deploy and begin the Tape-ribbon winding up to the end (top). They reached the tops, make several revolutions and go down. What did we do? Where we did numerous layers with a ribbon formed "head", and the other end of the wire remained thin (without compaction).

At the top of the pestle, the rebier of manicure scissors make a depression (will have to apply strength).

Give the stamens and pestle a yellow-greenish tint.

Fall as a semolina grinder into a small container. Pour a drop of glue into another container. Put the curved end of the stamech in glue and immerse yourself in the semolina, take out. On the pestle we glue the semolina only on the top.

We rub a yellow pastel into a semolina, add yellow wire.

Build a flower

Of the white phoamyran, we cut the petals (6 pieces) of two sizes. The first three petals should be at an altitude of 9 cm, in width 4 cm. The second three petals - 10x4.3 cm.

We proceed to coloring petals. We grow a yellow pastel from the base of the petal to the top of a specific pattern. We distribute paint in the middle of the petal and at the edges, as well as on the tip.

Making barely noticeable green glare.

The involving side of the petals is painted very weakly.

On both sides (drawn in the middle of the yellow strip) we applied orange pastel.

We make yellow edging.

Draw a crap. The end of the toothpick stick in the chalk pastels, a piece of pastel, which remained on the toothpick, is transferred to the petal.

Brown small pastels draw on stamens and pestle.

Heat the iron. Apply the petal. We have a petal (in length) between the indexed and middle fingers of both hands. We start to bending. The central part remains untouched, and the sides of the petals take a convex form.

On three petals, the size of which 10x4.3 cm cut off the tip, paint the cut by yellow.

Two-three-places along the edge of the petal we make a weak wave.

I turn over the petal, we see a convex central stay. We apply to her green pastel.

We connect the pestle and the greenery of the Green Teip-ribbon.

Petals with cut tips are glued first. We apply glue to the base of the petal in a width of 1 cm, glit to teip-tape.

Petals distribute evenly.

The next top of the petals is glued between the petals of the first row.

From the olive or green thomas, we cut three sheets of 11x4 cm. Apply a sponge first green pastel, then yellow.

The shape of the leaves we attach in the same way as the petals did.

We fold the leaf in half, we apply the bend to the iron less than a second, add this bend with your fingers (first sheet). Heating the edge, stretch it with fingers. We get a wave (second sheet). Heat the tip and, pulling, scroll, draw longitudinal lines with a stick (third sheet).

We glue the leaves to lily.

Such a lily flower can be decorated with a gift, a Topiary, a hair rubber.

If you want to make a lily on the leg, then during the junction of the stamens and pestle, insert a thick wire.