The approach of the new year is felt long before the last numbers of December. And it is quite reasonable to start preparing for the holiday in advance - decorations for home, gifts, decor. Of course, it is good when new New Year's balls appear on the Christmas tree every year. And if they are still made with their own hands, at least decorated on their own.

Nothing prevents you from taking an ordinary Christmas ball, and making your own sketch, to transform it. This is the easiest option, although not everyone likes. Someone believes that much more interesting to make his New Year's ball from scratch. Sometimes used, you can say the Dedovsky Papier Masha method. And this is not the worst option.

In specialized stores you can buy a whole batch of ballot balls. More often is plastic monophonic balls in the amount of 4,6,10 pieces. So, using all the advantages of decoupage techniques, you can make a whole collection of balls.

Beautiful New Year's Ball: Decoupage

Before decorating the surface of the New Year's ball, you need to prepare it. Remove the wire fastening from the ball, and for convenience, firmly fasten it to the rod. Then the shallow squeak you clean the sequins from the ball (we are talking about a simple Christmas ball). Paint is washed off with a varnish removal fluid. Then the ball is washed with water, and then again cleanse the sandpaper.

• Podo under the picture is a primer. PVA glue Add to 30 ml acrylic paint. This composition is applied to the workpiece with a sponge, then you leave it to dry. Then again the billet is ground.
• Next, begone directly to the decoupage. Select the desired pictures, cut out the motive and try on it to the surface. In most cases, napkins are used.
• On a cut-out or torn pattern, make cuts - this will allow the image to take the shape of the ball, to avoid formation of folds.
• For gluing, you can use PVA-glue, which in equal proportions is divorced with water.
• The drawing can be glued so - apply the image and rinse it on top of the tassel soft. Or the glue is applied to the surface of the ball, well, the New Year's motive is already glued to it.
• After the ball is completely dry, it is once again to cover acrylic paint to gently compare the face and glued pictures.

After drying the glue, its rough traces are possible. They can be rejected by sandpaper. Well, the finish decor will depend only on your imagination. You can add sparkles, highlight the paint image contours, use the glass.

MK: New Year's balls with their own hands, decoupage

There is a well-known way to decoupage balls, not from very complex, in this work the manka will be used. If you are completely new to decoupage, you can safely use the proposed method, it is interesting and quite affordable. At the same time, they strain.

What materials you need:

• Christmas balls themselves;
• Three-layer napkins with New Year's motifs;
• PVA glue;
• Acrylic paints;
• Brushes;
• Sponge;
• Glossy varnish;
• Contours;
• Semolina.

Prepare a ball as described in the previous paragraph. It should be smooth and clean. Sponge put paint, which is mixed with a semoliant, do it in a point in the way - you will have a snow effect. For now, the balls dry, you need to cook napkins. Upper bright layer separate, and the drawing should be pulled out along the contour. Print it, carefully smoothing the drawing from the center to the edges.

Continuation of the master class on decoupage of Christmas balls

When the napkin dried, a real artist should be included in you. The edges of the glued pattern should be sublipped, and the intact part colors, picking up the tone of the paint, consonant with the tone of the image. To make an image of the volume, you can use a structural paste.

Multiple coating with a layer of acrylic varnish ball is not always required. Perhaps you specifically want to make structural, rough balls. Or dust to put the ball with sparkles.

Interesting will be the contour painting. And the inverse decoupage can be the most original way. All manipulations are done inside the ball, which is divided into two halves. Each part can be processed in turn. The picture will be glued to the inside of the semi-ball.

Master class nuances on decoupage of Christmas balls

All MK is similar to each other if you do not take care of the work of special difficulties. But in each case there are some defining nuances that determine the highlight of the work. Or just the details for which the novice for ignorance may not pay attention.

Nuances in decoupage balls:

• Always pretend to prepare a decoration ball - remove fat from the ball using the alcohol or liquid for washing dishes;
• You can dry the New Year's ball with a hairdryer, and if you make cracker (cracks), they will be more expressive;
• Each Lacquer's tier must dry, before you apply the following - hurry, spoil all the work;
• All additional ways of decorating - shadow for the eyelids, sequins, pastel, even pencil chips can go into the move.

On the Christmas balls you can make photos of family members. Only stylize them under retro or, for example, ethno-style. Then it will be really a memorable toy.

Snow Decoupage of New Year's balls from foam

With beating balls you need to work very carefully. But with foam balls there will be no such problems. You can cut the ball from the foam, which can be decorated as you like. Till threads, wrapping with a beautiful cloth, wrap in design paper, and of course, shook.

And you can make a decoupage of a snow ball. To get an artificial snow, you need to take a gun, glue and white paint. Mix all together, and snow is ready. Such a resulting bulge balls are covered in fully or fragmentary. And after the ball dries, you can stick pictures.

Decoupage of New Year's balls (video)

Decoupage of Christmas balls is another opportunity to decorate something in the way of creative applications. As a result, you get a completely new thing, without any defects, beautiful, unique. And most importantly, all this is done with your own hands!

Beautiful results!

In this article we will tell about how unusual and beautifully decorate the usual New Year's balls, turning them into something unique.

Nothing forms the New Year's mood better than decoupage of Christmas balls! Of course, much easier to go to the nearest store and buy finished products. But we are convinced that the positive energy from the needlework you will get much more than from the hike to the store.

How to make a decoupage of foam New Year's and old Christmas balls: master class for beginners

Polyfoam - extremely comfortable material Material For beginner masters. It can not be broken as glass. And such decor elements, such as fabric or beads, can be simply secured using a pin.

For example, even a beginner will cope with such a decor. Sequins are attached close to each other With the help of decorative pins Or ordinary pins decorated with beads.

If there is more free time in stock, you can try to decorate a foam ball as follows. To begin with, you should stock

• Blank from foam
• Soil
• Special varnish for decoupage
• Brush
• Water
• Needles, pin
• Sponge
• Sparkles, sequins, beads, ribbon, thread

IMPORTANT: Ignore the presence of the soil should not - he will give the billets the smoothness they need. This is especially necessary if the old toy is already being processed.

The procedure for action is:

• The ball is covered primer. The layer is needed dense. Ignore any sections of crafts.

• The billet must necessarily dry out. If it is not waiting to continue to work as soon as possible, you can use the hairdryer.
• Now turn decamental varnish. It will allow the sparkles that will be applied later, hold on the ball better.
• As soon as he dried and varnish, you can finally apply sequins. To do this, the sponge or sponge is pushed in them, and then she flimsy moves the ball. You can use one color of the sequin, and you can combine various options.

• Next, the ball skews a pinon which you can attach the ribbon - For her toy and will be hung on the Christmas tree.
• Now on needles mix beads, sequins. Beads stick into foam. You can form different patterns in this way.

IMPORTANT: Bead must serve as a "cap" needles like a decorative pin. A boot is placed under the bead.

Decoupage of New Year's balls with your own photos: instructions, description, photo

Such a ball will become a stunning surprise for loved ones, becoming a cozy addition of the New Year's interior. To implement such an idea need:

Transparent Christmas balls

• Photos
• Tinsel
• Tweezers
• Ribbons

The procedure is low:

• You need from the ball remove the mount. If there is a fear of cut down, it is worth it in advance with tight gloves.

• Now you need to take printed earlier photo and, cuting them with a tube, put inside ball. Straighten Paper can be tweezers.

IMPORTANT: Images must be printed on medium density paper. Too thick or thin paper will not fit - in the first case, push the workpiece inside the ball is difficult, and in the second it can break or straighten.

• Mishuur need to cut Not small pieces
• Fall asleep her inside The ball can be with a funnel made of paper. Fasting should be carefully - it is undesirable to hit the decor to the area in front of the photo.
• Just as neat inserted fastening back. So that the ball turned out more elegant, recommended attach to it a ribbonwhich will keep the toy on the Christmas tree.

Decoupage of New Year's balls Bows: Instruction, description, photo

For such a decoupage will be useful:

• Foam or plastic ball
• Jute thread
• Ribbon from Atlas
• Beads
• Pistol for working with glue
• Scissors

Decoupage order:

• First of all, to the ball need glue jute loop. The photo shows the base from the usual tightly compressed paper, but any foundation is perfect for a new year's ball.

Riceling a jute loop for a foundation for the New Year's bowl

• Now Around the ball Need to glue jute thread.

IMPORTANT: Do it follows carefully, not allowing the occurrence of spaces.

• Next, hot pistol produced mount beads.

• It has arrived brake brake. For him need cut three stripes of tapes.

• One of the tapes need fold out pressure, gluing place of connection.

• The same need to repeat with the second piece of tape. These two pieces need to be attached to each other Cross on the cross.

• They can be crepe glue, and you can simply take a piece of ribbon of another shade.

• Now it remains only printed a bow to the jute bulb ball. You can disguise the trace of gluing another ribbon.

How to make bows for New Year's balls with their own hands?

To create uncomplicated bows will be useful:

• Tape from satin. It is desirable to pick up the tapes of two species
• Beads, rhinestones
• Rule, scissors

Operating procedure:

• Need from tapes of each type Cut one piece. The size of them should be different.

IMPORTANT: The ends of the satin ribbons must necessarily be laid with fire or handle glue - it is to prevent their spreadsheet.

• Now you need take a larger tape by folding Her in half.

• Holding the ribbon in the middle, you need her bend like pictures.

• By analogy need fold and second ribbon.

• Then The workpiece must be turned over upside down.

• Part of the workpiece is lowered, and where she was, clay is applied.

• Next Ribbon glued in the form of a bow.

• Similarly created by I. Second bow Of the ribbon of smaller diameter.
• Both bantas bonded between themselves. You can also decorate Beads.

Decoupage of New Year's balls lace: Instruction, description, photo

From Lace, you can build a bow along that scheme for ribbons, which was attached above.

You can also decorate the bowl of lace in full:

• For this, first of all, it is necessary, as described earlier, apply to the brush.

IMPORTANT: Lace should choose such that is easy to cut into segments.

• Next lace glued On the ball. It is useful to the usual PVA.

• On lace need apply acrylic paint or soil.

• If you want to give lace another shade, you need to start dilute acrylic paint of this shade with water.

• Then Paint is applied to the ball. You can immediately Melting her napkin - So the effect of antiquity is created.

• It remains on top after pouring paint cover the ball acrylic varnish.

Decoupage of New Year's balls with cloth: Instruction, description, photo

For fabric decoupage needed:

• Foam ball ball
• Fabric of two colors. One will be background, and the second is a pattern
• Tapes - and thick, and thin
• Spice or toothpick, stationery knife, manicure set scissors

Ball manufacturing process:

• Ball for start it is divided into sections. The greater the ball, respectively, more sections. You can do it "on the eye", but you can use the handle, thread, stationery rubber bands - which is more convenient.
• Over lines Cuts are made by a stationery knife. Since the foam cuts easily, there will be no problems.

IMPORTANT: Deep cuts can be done only if the ball is large. Likewise, in this case, the risks simply fall apart.

• the cloth From the reverse side follows Restore.
• Need to Cut Loskutkapreliminary Measuring the parameters of the sections scheduled on the ball. Be sure to stand Leave an approximately centimeter on the allowance. It is advisable to cut a fabric in the form of ordinary rectanglesSince in the process of decoupage it can "move aside" a little, leaving the gaps on the ball.
• Next, using the toothpicks or needles, fabric need to be fed into the cuts of the ball. Starting standing from the middle Gradually moving towards the edges.

IMPORTANT: Of course, you can simply glue the fabric, but there is a big risk that it is deformed in the gluing process. It will be impossible to fix the cracker in this case.

• Extra threads are cut off, and the jacks are masked by ribbons.

Decoupage of New Year's balls Napkin: Instruction, description, photo

This option of decoupage seems to be some complicated, because it is not easy to attach a spherical surface without the occurrence of folds. But probably in the following way:

• First of all is worth treat balls themselves, Sunshiring them and covering the primer at least two layers. Each subsequent layer is applied only after drying the previous one.

• Now take away decamental napkins. Naturally, the plots must be selected interconnected. Provided pictures worth it gently break through the edges. You can cut, but negligent looks even better.

IMPORTANT: To dissect the napkins at this stage is not worth it - it will be necessary to make it immediately before applying to the ball.

• But after the pieces are chosen, you can Slide the napkin and glue it on the ball. From above you need to walk glue.

• In this way The rest of the plots are pasted.They are recommended stick to the brassthat method is most successful.

• Now the balls need to be left dry.
• Then they are desirable occup - So the folds will be removed.
• Next are applied Three layers of acrylic varnish on a water basis.
• Check again Dry.
• It has arrived alkyd varnish which is sold in the cans. Required two layers.
• One more Dry.

IMPORTANT: Dissolors can not be neglected.

• The final stage remains - decor Shara beads, ribbons.

Decoupage of New Year's balls: Instructions, description, photo

For a similar decouphage need:

• Polyfoam ball
• Wool of different colors
• Needles for felting
• Lesk
• Silicone Glue High Temperature
• Ribbons from Atlas
• Beads

Decoupage is done like this:

• Using needle wool is supplied to the ball in small pieces. On the foam flat surface, the material will be perfect, therefore, even a beginner master will cope.
• Further extra pieces are added. It is necessary to have fun until the woolen surface becomes smooth.

IMPORTANT: Finish felting is worth carrying out a thin needle.

• Next need Split ornament.
• Carefully drinks are sewed and tapes are tied - It all depends on the idea.

Decoupage of Christmas balls Papier-Masha: Instruction, description, photo

For such a craft, you need:

• Normal A4 paper
• Wood stick (you can use sticks from Japanese restaurants)
• Some board with holes where you can install sticks during the drying
• Acrylic primer, acrylic varnish water-based and acrylic paints
• GYLAL - 50 ml
• Liquid used to remove varnish
• Brush No. 10.
• Pile
• Rag, which absorbs well
• Threads, needle, lighter
• Ribbons

The ball is manufactured like this:

• First thing, bowl is put in order - The top is removed, sequins and other decor are removed by the skin.

IMPORTANT: It is advisable to do it under a jet of hot water.

• Lacquer Early paint is cleaned.
• Again you need to use emery paper.
• Next is the coating acrylic primer.
• Now the ball It puts on a wand and dried. You can use a hairdryer, but in this case it must be kept at a distance of at least 30 cm from the ball. After that, you have to wait until the ball cools.

• Pial is poured glue.
• Sheets need to break in several parts sick them and then n refrigerate.
• Further paper Need quickly Cut into glue and press it to the ball.
• Fingers folding folds On the cradle.

IMPORTANT: It is necessary to work promptly, as the paper turns and breaks shortly after entering it glue.

After all the pieces pasted the ball, you need to leave it again dry. Only this time approximately for 12 hours.

• Acrylic paint Already a dried billet is covered.
• And again Dry. This time on 3-4 hours.

• Now With paint mixed holly. This composition needs to cover the ball, and quickly!
• Further cloth We need easy movements go through the ball.

IMPORTANT: You just need to remove the surplus, and not remove the paint.

• Billet again it dries 3-4 hours.

• It has arrived acrylic varnish. They need to miss even cracks. After hours break Approached two layers with drying Between them.
• Left Redurate ball.

How to make a New Year's toy Shar-Artichoke Decoupage: Step-by-step instructions

For the realization of such beautiful and meditative equipment need:

• Actually, foam balls
• Loskutka fabric or finished ribbons
• A large number of tailor needles

The process is:

• If in stock Loskutka, They need them well Throw. Ribbons are cut into pieces About 3-4 cm each.
• First ribbon It is necessary to attach as follows.

• Next piece need fold in the form of a triangle.
• Next need create a few triangles, And then attach them to the vertices to each other. As a result, it turns out square.

Then need edit ribbons on such a scheme:

IMPORTANT: The space can be reappeted, for example, a ribbon.

Decoupage of Christmas balls in Vintage style: description, photo

Materials:

• Balls are not too small diameter, otherwise the pictures will be inconvenient to glue
• Acrylic white primer
• Glue varnish, which is used in decoupage, as well as acrylic glossy varnish
• Decamental wipes with vintage images
• Scraps of old newspapers, notes
• Paint acrylic some vintage tones. It is worth thinking about the acquisition of colors of antique gold
• Glitter.
• Wet wipes
• All sorts of things for the decor like beads, sequins, lace, ribbons, texture paste. Since it is about vintage, ink will also be useful, archival stamps for text, various dryers, sprays, etc.

Now about the process itself:

• First thing, the ball is trained - Ground with a sponge. For convenience, it is recommended to pre-remove the lids from the balls and put the balls on the stick. By the way, the lids should also be treated with a primer.

• Balls need to give dry

• Meanwhile Images from napkins are broken.
• As soon as the primer dries, you can use glue Attach pictures. Loose with a napkin glue you need and over the image.

IMPORTANT: Smoothing the napkin is necessary from the middle to the edges.

• Now you need to produce decamental varnish coating.

• Next you can glue pieces of newspapers. The principle is the same as with napkins - sticking on glue, and the promissory to them is also on top.
• Now you can glue eg, waxed cord or apply texture paste through stencil. They will also create the effect of vintage. And how can you keep from paste Krakl Creating the effect of cracks?

Pasta Krakle is what is needed for a vintage ball!

• Next, you can walk on top of all this magnificence. White acrylic, Trying to them seek and hide all clear boundaries. The wax cord needs to be hidden under the paint completely.

• It has arrived color paints. Apply them with your fingers, then slightly swinging the napkin. As a result, the effect of scuffs should turn out.

IMPORTANT: It is preferable to work with several paints like a similar tonality. For example, red, brown. Application on the paint ball under the ancient gold

• Then, since imitation of antique gold went, you can apply a little Potali. It is applied to glue with a brush.

• Spray with mother-of-pearl red shade Here, too, can come in handy. Only apply it to a bit.
• Now it does not prevent a little bit of pointing the workpiece white acrylic. It should not be much - you just need to create an effect of accumulating.

• If there is a desire, you can using ink and text stamp Adjust the craft.

• Does not hurt I. glitter - It is applied with a tassel.

• Now you need glue a ball, and the craft itself decorate somehow decor Like flowers, ribbons.

IMPORTANT: Cap from the ball should also be decorated.

• At the end it is recommended to take advantage acrylic varnish. Moreover, it is desirable that previous works do not smear the tassel, take advantage of the lacquer.

Decoupage Snowman on New Year's ball: ideas, photos

Lace New Year's ball decoupage balls with napkins and cracker paint

New Year's ball, adorned with a handicraft - a great idea for a gift! Anyone will undoubtedly be proud of such a unique and beautiful ball in his collection.

Video: master class on how to spend a decoupage of the ball and boxes to it:

New Year's decoupage is becoming increasingly popular. Many diverse ideas are found in many master classes that require certain investments.

Under the new year I wanted to spend money, but make a beautiful New Year's decoupage with your own hands there are a desire for many.

How to make a decoupage saving money?

This question has an answer, and it is represented in my master classes.

I believe that using the minimum of materials, you can create extraordinary beauty, no worse than with expensive materials.

Someone my innovation may not have to taste, but it is necessary to understand that during the crisis and recession of the economy, people should not cease to engage in art.

New Year's decoupage plates

Of course, for this we will need wax. And where to get the wax?! Of course, from small cheap candles that can be purchased for a very small cost in the amount of 100 pieces in the package.

Believe me, it is very profitable, because it is much more expensive to buy one big candle.

And at home, probably there will be candles, which and throw out a pity and put aside on the table. That's exactly what we need.

Three old candles on the grater and calm in the water bath.

Take a magazine leaf and make a cone from it. We cover the entire Cone with scotch, especially good the top so that the wax does not flow.

Pour the wax into the cone, putting pre-inside the fetal or attach it to the stick. If you do not have a fetal, you can moisten several layers of threads in kerosene.

We put in the refrigerator and leave to stick. By time, the frozen will take about 2 hours, but I left the candle for the night. I got me like this church-candle.

If the candle came out not quite even, you can adjust it with a knife (remove extra elements of wax).

Such a candle is ideal for a gift, decoration of a table and interior.

New Year's decoupage of the bottle of champagne

A light and interesting idea that will give you many pleasant emotions and will become an excellent gift for the new year.

For decoupage bottles we need:

• sponge for washing dishes;
• pVA glue;
• scissors;
• napkins;
• gouache;
• brushes.

For your master class, I took a bottle of Soviet champagne 1.5 liters. I want to make it to celebrate the New Year in the family circle.

You can take any friend a bottle with or without.

Preparing a bottle for New Year's decoupage

First you need to remove the labels. It's not easy to do this, because it is extremely dangerous to lower champagne in hot water (the bottle can burst in your hands).

To easily drop the label, I used the metal washcloth. She does not scratch and removes well.

Albina Zakirova

In anticipation new My children and I decided to make gifts for our favorite parents.

One of the most popular species decoupage is a decoupage on a tree.

Decoupage - machinery Decorating interior items, fabrics, wood, glass with a paper applique. Word decoupage from french, denotes "cut".

Essence decoupage techniques isThat the surface of the subject is pasted with a carved image of a thin paper, which is then covered with varnish. Decorative pattern for decoupage You can cut from a conventional paper napkin, labels, logs, and you can use special napkins for decoupage.

Billets for this creativity can be easily purchased in free sale.

For this we used:

1. Wooden blank ball

2. 3 layer napkins (different)

3. Glue PVA

4. Acrylic paints.

At first I made a blank (a wooden bowl was rejuvenated on both sides, the napkins were placed on the ball. Each child himself chose the design of his bowl.

Like these ones christmas The balls turned out from us.

Occupation decoupage Creative and fascinating, creating new and unusual things you can present close to the unique gifts or decorate the house, as we did it with children.

Everyone was satisfied!

Publications on the topic:

With parents and with children, we decided to make New Year's decorations for the group. Parents brought old disks and paper napkins for decoupage.

It remains very little time before the new year's occurrence, and we all continue to invent something, decorate a group, make crafts. Work.

Empty wrapper - this is a toy! Neither the ball, no beads, nor, even, clapper. Empty wrappers are easy and beautiful. Foil reflects overflows.

Christmas toys with their own hands (prize place on the governor's Christmas tree) not far from the New Year's mountains. Probably, I will not be mistaken if I say that.

From the first of December and, almost the whole month, in our kindergarten "Sunny" was a review - a contest of joint creativity of children and parents.

The idea of \u200b\u200bmaking christmas toys from sink snails appeared with me, of course, in connection with the approach of the new year. My house has long been kept.

The new year is approaching. Very soon we will decorate the group and the festive Christmas tree. In connection with these events in testoplastic classes.

New Year's decoupage is the thematic decor of jewelry and items associated with the New Year. In recent years, this technique for decorating various products has gained special popularity. Decoupage is used to decorate any items - balls, dishes, windows, bottles with champagne, plates, candles, christmas toys. Simple and affordable ideas, as well as the Master Classes of New Year's decoupage, will help you independently decorate your home and prepare it for the long-awaited holiday with your own hands.

Decoupage of New Year's balls: decoration of Christmas tree toys

One of the main attributes of the new year is New Year's balls. Decoupage of New Year's balls is very simple in performance, while this technique allows the original toy toy originally.

For such creative work, the following items will be needed:

• plastic balls are monophonic or transparent;
• pVA glue, diluted with water 1: 1;
• napkins of New Year's subject;
• scissors;
• acrylic paints;
• crocheral lacquer;
• sponge;
• semolina.

Ball decoration process:

Bowl completely cover gold color paint. Apply it should be driven by movements.

As soon as the layer of gold paint will dry, the ball should be covered with varnish intended for craklera. It forms a crack on the surface of the ball, which will give the effects of the effects effect. Give the workpiece to dry.

Now proceed to the coating of the product with the main color. To do this, use a sponge, it will allow the paint as exactly as possible.

After the painted ball is completely dry, you can start directly to decoupage. Take the New Year Napkins for Decoupage, cut out any motive you like, separate the top layer with the color image. Stick it to the surface of the painted ball, using the diluted PVA glue. It should be known that glue during decoupage to the image is applied from the middle to the drawing boundaries.

When the drawing is already glued to the ball using a sponge, glue and the main paint, it is necessary to grow the boundaries of the image. If you can draw, you can decorate the ball and acrylic paints.

Certain spherical areas decorate semolina, imitating snow. To do this, apply glue on the surface of the product, and suck with a semi-on top.

Such a simple New Year's decoupage of toys on the Christmas tree will help them make more original, bright and festive.

Decoupage of New Year's balls with 3D effect: photo and master class

Master class of decoupage of New Year's balls with a 3D effect will create beautiful decorations at home.

For such a craft, the following materials and tools will be needed:

• detachable plastic ball;
• cardboard;
• picture;
• pVA glue;
• acrylic paints;
• semolina;
• lacquer with a 3D effect;
• wool;
• tassels;
• sequins;
• double sided tape;
• contours;
• ribbons for decoration.

We proceed to create original toys on the Christmas tree:

The ball is discharged into two parts. In one half make an internal decor. White contour inside the ball put the dots and on top of sprinkling sparkles.

Inside, painting a white acrylic paint ball, using a sponge, here will be a picture. Cut from cardboard a circle of the desired diameter so that it approaches the sizes to the Christmas decoration, we glue a picture for decoupage with the help of PVA glue.

We place a picture into the ball and cover the drawing with a transparent varnish with a 3D effect.

On the other half along the edges we applied glue and glue cotton to imitate snow.

We combine two halves of the ball with a thin tape, and to hide it, on top it is beautifully fixing the ribbon and tie a bow.

The final stage will be the locking of the loop.

New Year's decoupage bottle from under champagne: options from masters

In many families, there is a tradition for the new year to give a bottle of champagne. Make a decoupage of the New Year's bottle for your friends, they will certainly like your gift.

To make a decoupage of the New Year's champagne, you should decide on the idea of \u200b\u200bdesigning the bottle. You can choose the drawing of the symbol of the coming year, for 2018 it is a rooster. A good option is the image of Santa Claus on a bottle, the choice of pictures for the New Year's decoupage of the bottle of champagne depends only on your preferences.

You will need all the same materials as for decorating a ball, in addition, it is also necessary to prepare a greasy tape for sticking the label on the bottle.

Start a festive decoration of champagne:

From the bottle to separate the label, for this some time place it into the water. It is not always possible to delete it, therefore, it may have to be stuck with painting scotch.

Then toned the bottle in exactly the same way as the ball, attach the drawing.

Considering the fact that the size of the picture pictures is several times more, it is necessary to glue it in the direction from the center to the edges using a wide brush.

The occurrence of breaks of the picture is not excluded. These places can be easily hidden, touched their acrylic paint or decorating with ribbons, bows, semolia.

From above on the neck of the bottle, you can wear a small hat of Santa Claus.

You can use other options for New Year's decoupage from the masters that offer many ideas for creativity.

Decoupage boxes with New Year's balls and pictures for registration

A good option for storing New Year's toys is a large box of dense cardboard. Decoupage boxes with New Year's balls - a great design option for storing toys.

In addition to a large roomy box, you will need such materials:

• napkins with New Year's drawings;
• glue;
• decorative crust lacquer;
• the contour on the glass;
• white coat paste;
• acrylic paint;
• acrylic soil;
• brush;
• sponge.

Procedure for decorating a box for balls:

The entire surface of the box is covered with acrylic soil. Such actions are necessary in order for acrylic paint to lay on the box evenly, smoothly and well kept on it.

When the soil dries well, you need to apply a layer of acrylic paint. The top of the box can be arranged in white, the bottom - in the sky blue.

When the blue acrylic paint dries well, the box can draw snowflakes using the contour for glass.

On the top of the ball storage box with glue paste pictures of New Year's theme. To make a picture of an old species, it is covered with a crockel varnish.

Free place around the picture decorate under the snow, it is enough to apply a rough white paste.

To securely fix the drawing and protect the box from the effects of moisture, the glossy coating varnish should be applied on top. After drying it on the surface of the box, a dense film is formed, the appearance resembling a thin glass.

Beautiful and elegant box for storing New Year's toys. Having placed balls into it, you can not worry about their integrity and safety until next new year.