Step-by-step fish tail. How to weave a fishtail, two pigtails, weaving hairstyles with a rubber band step by step, tail on the contrary, photo, video

Fish tail is the easiest option among exotic and original braids. At the same time, it looks more intricate compared to the usual classic scythe of three strands. The hairstyle is performed only from two strands. It can be done without effort to make himself or someone else.

In contact with

In the people, the hairstyle is also known as the sick tail and the mermaid of the braid. Indeed by appearance Spit reminds the tail of the fish and is associated only with water beings.

So, summing up, it is necessary to allocate advantages of Spit "Fish Tail":

Suitable for any length, except very short.
Suitable for all hair types.
It looks great even with negligent strands.
Keeps all day.
It is the basis for more complex hairstyles.

The pattern of weaving is successfully emphasized by plating.

Tight fish braza makes hair shine elegant glitter. Therefore, it is not necessary to decorate it: it is so sufficiently effect.
If the braid is braided freely, you can decorate it with rhinestones, feathers, hairpins, and so on.
Additional accessories will give a hairstyle more elegant and festive look.

Step-by-step instructions like weave a fishe tail:

Wash your hair and dry.
Apply mousse or foam on strands, spread out.
Rear subside all curls into two parts. The higher you divide them, the higher the weaving will begin.
Separate a thin strand at the right side and attach it to the left side. Hair should be taken as if from the inside or from the outside.
Now we separate the fine strand at the left side and connect it with the right.
Continue to turn the braid, taking strands to one, then on the other hand.
At the end, lock the hairstyle with rubber band or hairpin.

The scheme of weaving only at first glance seems difficult. But it's not at all. Just need experience and some skill.
If you braid a braid itself in front of the mirror, hairdressers recommend conveniently settled. So you will see strands and control the stroke of weaving. Even better if you have a trumulous. Then the sash should be placed so that you can see the braid from behind.

Secrets of creating hairstyles

In order to heat the braid beautifully and correctly, you need to know some important secrets.

Spit Fish Tail itself - Video:

The strands that you take on both sides to create a braid should be the same in thickness. The harmonious view of the hairstyle depends on this.
In addition, the thinner of the strands, the sophisticated and the luxurious braid will look like. This is especially true of long and straight hair. To compare, turn the braid with thick strands, and then with thin: you will immediately see the difference.
The use of fixing means like mouss or foam before wearing weaving is particularly relevant for wavy and curly hair. If you do not want a spit look like a fluffy dandelion, be sure to spread strands.
In order for the braid to be more expressive, leafing it as much as possible. Give her light carelessness and carelessness you can always, slightly wave a strand. By the way, this reception also has an advantage: flushing braid looks wider.
If possible, before weaving, curly hair straighten the iron with a thermal protective agent, the braid will be simply magnificent.

If it is difficult for you to weave the mermaid braid from loose hair, make a tail on the rubber band. To keep strands is becoming more convenient because all curls are collected. Then just remove the gum and seize the base of the braid.

The braid will find a completely different kind if the strands symmetrically pull out some distance from each other. Make it you need as accurate as possible. So on the sides you will get air hinges from the hair.

Lush, bulk braid Fish Tail - Video:

How to braid a fishe tail with a ribbon?

If you go to a party and you already have a bright outfit for you, add it to Rus Malochy oblique satin ribbon appropriate color. The tape is better to choose non-smoke, but at the same time quite long.

Scheme asymmetric weaving Fish tail with satin ribbon gradually:

Drop your hair and divide them into two parts.
From the right side of the outer edge to separate the strand and put it down to the inner edge of the left side.
Now from the left side of the outer edge, separate the strand and put it down to the inner edge of the right side.
Take a braid by 2 cm.
Attach the ribbon to the outer edge of the right part.
Move the tape to the inner edge of the left.
Take a strand from the left side and put on the inner edge of the right side.
Ribbon and left part of the hair hold at this time in hand.
Now separate strand with right side And attach to the left.
Get the ribbon to the outer edge of the left side.
Now put the tape from the outer edge of the left side to the hair of the right side.
Next, repeat weaving until your hair is run.
At the end, lock the braid to the ribbon (it should remain sufficient length).

This technique suggests the ribbons on the one hand and then transfer it to the other side. Due to the fact that the transfer can be performed at any time as desired, the tape will be asymmetrical on the spit.

Quick way to braid braid fishtail with ribbon:

If you are more attracted symmetry, Perform weaving with a ribbon according to the following scheme:

Start braid on traditional technology.
Fold the satin ribbon twice and start the braid at the very basis.
One end of the ribbon placed on the right side of the hair, and the other - with the left.
In the course of further weaving, along with a strand, always capture and move the tape.
At the end, just tie out of two tapes a bow.

Since the ribbon is woven at once from both sides, it should be twice as long. Consider if you take too wide tape, the hair in the spit will not be visible.

Another curious move: take 2 ribbons different color And tie them together. Now they can be used for weaving. Poster knot for oblique. So it will not be visible completely.

To give the volume in these cases, you can not stretch straight, but the ribbon itself. However, it is necessary to do it symmetrically.

Hairstyles with fish tail

Horse-tail

There are many different hairstyles With a fish tail. For example, a sick tail from horse tail.

First, assemble your hair high on top and fix them with a rubber band.
Then divide the strands into two parts and turn the braid.
If you perform the festive laying, the base of the tail is disguised with a ribbon tied to a large bow.

Such a hairstyle is suitable for fashionable and modern style Baby Dol.

Fish Tail on Makushka

Hairstyle will be very expressive if you manage to braid a fish tail across your head. For this, weaving should be started on the side, dividing the hair into two strands. Gradually, the braid can be rotated in any direction, picking up strands from different sides.

Hairstyle Fish spikelets throughout the head - Video:

If it seems to you difficulty, braid a fishtail on the side, and then conserve your head as a wreath. It will be especially beautiful if you tighten the spiral braid. To fix it in a certain position, there will be pins and invisible.

Malwinka

Initially, shrink your hair back.
Then collect strands from the sides and secure them with a rubber band.
From the resulting tail it is necessary to braid a fish tail according to the classic scheme or with the addition of the ribbon.

On the Makushka, connect the braids with the help of a gum, and the remaining hair dissolve. Let them freely fall down.

To make a hairstyle more original, from the two braft, one sick tail. It is easy enough to do it: strands are located on the sides, so they will not be very confused during weaving.

During the unification of the two brake into one, make sure that they do not shine.

If you are experiencing difficulties, put a gum on your hair, and then leafing the braid.

When finished, the gum can be removed.

Fish tail Naboka

Mappy fish tail side, undoubtedly attracts attention. Make it very simple:

Stash all hair to one side.
Then divide them into two zones and pleading the braid.

Note that the side braid to drop back will no longer succeed, as it will be ugly to strain.

Spit from rubberry

This is an option for those who actually love creative solutions.

First option

Spit from rubber band (in the style of a fishe tail) - Video:

Second option

Make a tail on the back of the head and divide it in half: one strand is top, and the bottom is lower.
On the upper strand, put on the gum, slightly retreating from above.
Now thread the bottom strand through your hair and tighten the gum. So you will have a heart.
Reincate the elastic band on the hair and repeat all the actions first.
The hearts resulting from hair well correct that they looked luxuriously.

Modern fashion offers the owners of medium and long hair various options Weaving: Spit on the contrary, French braids, spikes and so on. Spit fishing tail looks unusual and very beautiful, but it's not so difficult to make it.

Hairstyles with weaving "Fish Tail" look outwardly and fully suitable for both a business or a solemn meeting, and for pastime in an informal setting.

You can braid one or two pigtails on your own, applying a fraction of patience and accuracy.

Fishe tail - way to emphasize the beauty

The best "material" for braids - thick and silky hair. However, on the wavy and deprived volumes of the hair, the braids will look no less attractive, moreover, weaving braids of a fishing tail will allow transforming thin liquid hair, visually adding them the magnitude.

Koshets are relevant both at an informal meeting, and at the official event, with a business suit. Depending on the amount of pigtails, the method of their weaving and accessories, the resulting image will be romantic, strict or even a booty, relevant on glamorous photo shoots.

How to hide disadvantages with the help of a fishe tail? To prettily pull out round face, start weaving as high as possible. The triangular face will decorate two braids and a thick bang, and to transform your own hair, make braids with lush and long, worth adding a few overhead strands to weaving. It is especially interesting to look woven overheads of bright juicy shades or just contrasting the native hair color.

Side Weaving Fish Tail

Video - Step-by-step guide weaving braids "Fish Tail"

Scroll to braid on the side is very simple. It is at this option that is most convenient to practice in independent weaving.

First of all, it should be thoroughly combing and smooth out the hair with an iron. And so that the hairs did not get shed and have not been subjected to static electricity, we apply a little tonic or splash the hair with water from the spray.

We divide the hair on the sample. We throw the whole mass of the hair on one shoulder and divide it into two equal parts - the right and left.

From the outer edge of the right side of the hair, we highlight a thin strand and shift it into the left thick strand, closer to the middle. Now, from the left thick strand, we highlight a thin strand and shift it right, closer to the center. As the entire braid weaving the hair should smooth out the hair with a massage brush and slightly spray with varnish for the perfect smoothness of the braid. Thin strands will be intersecting to form weaving, similar to fish skeleton - thick at the base and more subtle by the end of the spit. Pledge beautiful weaving - Accuracy and the same thickness of separated strands.

Weaving braids "Fish Tail"

Tip tie with rubber band or ribbon. The base of the braids can be decorated with a living flower or a small barn.

To soften a strict image, add a drop of negligence and carelessness, alternately pull out openwork hinges from weaving. Spit will become more lure and attractive.

Fish tail on the back of the head

Video - How to weave the braid "Fish Tail" on the back of the head

Another simple version of braking the fishtail - smoothly combed the hair from his forehead to the back of the head, intercept them with a rubber band and like the first way to make a hairstyle. To hide the gum, before weaving, the strand from the tail and wrap the base of the braid, fixing with stiletts.

How to weave the braid "Fish Tail" on the back

For a cocktail party or even for a hike to work, you can decorate a fish tail on the head of a ribbon (or a thin silk scarf). Option is good for long hair. We collect the whole mass of the hair in a horse tail, drag it with a rubber band. We turn the braid, the tip of which is tightly intercepting the ribbon. I pull out openwork strands from braids. We convert to the braid inside, bending it in half. The tip of the braid and the tape should be under the rubber band. Two or three times we turn around the ribbon around the gum and tie a beautiful bow.

To brag a fishtail from the nape, but not collecting the hair in the horse's tail, you will have to make all your patience and accuracy.

You can apply a little wax on your hair before weaving, it will add smoothness and shine hairstyle.

Smoothly combat the hair in the direction of the forehead to the back of the head.

On the right and on the left at the temporal areas separated by one strands of the hair. It is desirable that the thickness does not exceed two centimeters.

Dissoped strands intersect in the field of the backbone. Handing with hand two strands, from the left temporal zone separate the third, the same thickness. Add a new strand to the first (right). We highlight strand from the right temporal zone and shift it into weaving to the left strand. Thus, to the very line of hair growth, it is necessary to distinguish and uniformly cross thin strands. Next, weaving continue similarly, capturing that right, then the left is thin strands and crossing them. The tip of the braid is intercepting rubber band or hairpin.

Video - How to weave the braid "Fish Tail" in French style

To start weaving from the forehead itself, two thick strands should be highlighted at the hair growth line, cross them, and then add new thin strands from the forehead, from the temples, from the ears zone and below, to the neck. When all hair will be collected, the tips are blocked in a classic fish tail and tie a rubber band.

Very nice and gently looks like a similar hairstyle, if the braid is not easy to tie with a rubber band, but to flush and wrap the spiral on the back of the back. It is necessary to fix it with invisible and decorative studs.

Evening version

Such a hairstyle for a business meeting or for a festive evening. With insufficient length or volume of hair, use false strands on the hairpins by adding them to weaving.

Hair straightened and divide into two equal parts by a sample in the center of the head. From the forehead by separating the strand of the hair.

We start weaving. Capture thin strands from the probor and from the hair growth line.

It is not necessary to tighten the braid too tight. Spit must be as embossed as much as possible. For strength as weaving uses hair lacquer.

After weaving reached the nape, we turn the rest of the hair into the fishtail.

So that the spit has become even more fluffy, capture a couple of hairs on the tip and all the weaving tighten the hand up.

We repeat the procedure on the other side. Now we have two beautiful braids, artistic disheveled and waiting for the completion of styling.

Now both braids are beautifully laid on the back of the head, wrapping them with spirals and fixing invisible and studs. Hands correct the loop by covering them the hairpins.

Decorative studs or tiny flowers are suitable for decoration.

Such a hairstyle based on a fish-tail braid will require help from side or special skill.

From the forehead line, we separate the V-shaped strand. I combine it, well smoothed and tighten with a fine rubber band. Throwing over the gum tie the ribbon.

Using a comb with a subtle tip, pull out air loops. Tie a second bow.

We make the third V-shaped sample from the ears before the nape. Catch up with a rubber band separated hair and pigtail.

We collect the remaining part of the hair, tie a rubber band and again pull out air loops.

Depending on the length of your hair, there can be a lot of alternating pigtails of fishery tail and sections with air loops. Be sure to lock the result with styling agents and hairstyle will not lose the form all day.

We look at the photos of celebrities and see gorgeous volumetric braids with huge links and like fish tail.

What is this fish-tail braid and how to weave it?
So I want it not only to weave, but also use in different hairstylesFor example, around the head, mastock or in Malun.

Having mastered such a weaving, the range of hairstyles will expand greatly, and your envious will notice new hairstyle. Those who do not own this method will ask to show it or teach them, which will make it becoming more popular and gain new acquaintances.

And you want to do it quickly like a friend and yourself? In minutes in the morning and quickly in front of the school, work so that there is more time for fees?

But it looks so impressive that it is not even believed that this is under the usual man, and not just a master. You will master the technique right now for free, it will only stay to train to bring the option of weaving to automatism.

how to brake spikelet baby step-by-step photo instruction
Let's discuss yourself.
Try to find 5 distinctions in these braids fish tail and spikelets. You will be very surprised by the result.

It is very important for a beautiful and dense braid to know how to cut the tips to yourself at home with the help of training video, described in detail.

It will also be useful for you to know how the braid from the tails with rubber bands is stupidly described.

Spit fishing tail is another one of the hairstyles of Variations of the French Spit. Those who first want to learn how to own this weaving, we recommend looking at the scheme, photo and video tutorials.

All 3 sources of information will help you quickly and easily weave the fishtail (spikelet) on the model and on yourself.

To learn how to quickly, look at the photo and the scheme, then select the desired fish tail option and read the description and watch the video.

If some point is not clear, return the moment and revise again. Pay special attention to the handling of the hands and the separation of strands.

Hair prepare, as for any weaving. If they are electrified, fed - spray water from spray.

+ and - weaving:

Pros:

simple performed;
perfectly combined with any other hairstyle: tail, bundle, french oblique, shell, crown, ripple;
Soft and compliant spit, which allows it to be laid in any desired direction;
It is easy to braid it, because there is no need to study complex instructions;
suitable thick and rare hair due to volume;
such a braid just to make volumetric in seconds;
She has no age, so we will fly it yourself or in combination with young girls and young ladies for 50.

Minuses: It will be difficult for newcomers to heat her all over his head and make a beautiful beginning, since making her for the first time very quickly tired hands.

Tip: To cope with all the minuses, make the first westings on the model so that your hands remember weaving, and the eyes are exactly the sequence of actions. So after a few dozen Kos, you will blame the perfect fish tail.

5 options

They should be disassembled before the start of weaving:

classical;
on the contrary or reverse (we take strands exterior or internal, straight pour under or on spit);
double;
from rubberry;
Other variations based on classic.

When weaving itself or independently:

What could be a fish tail?

What start will your spikelet depends on the chosen hairstyle and your desire. Look at the list below, we tried to take into account all the options.
Fish Tail Woven:

From the tail or collected hair (on the back of the head, painshche);
from the temporal area and by the side part;
across the head starting from his forehead;
on the side of the head, around;
from the hair on the top of the top;
From the temple and the painter goes through the whole head, smoothly declining down.

In the photo above, you see several options at once and the main problem is the absence of a beautiful beginning if you are wearing a classic method, as well as when moving from weaving from behind on the side.

Tip:Start weaving with a conventional braid out of 3 strands and then go to the fishtail.

In order for the transition when weaving the fish tail on the occipital region, it was beautiful without breaking, plentying from behind until you reach the level of the neck or immediately shift all the hair on the side and only then leaf or contact your loved ones.

How to gently start weaving from the beginning of the head?

Cooked hair, sprinkle with a slightly water or gel, so as not to fluff out, then highlight strands of the hair where we start weaving.

1 method

We divide the allocated strand into 3 parts and begin the weaving of the classic French braid. Right strand on the central and left strand to the central, making 2 oscillation, fold 2 strands in 1 and then continue the weaving braids of the fishing tail.

2 method

We divide the allocated strand into 3 parts, we shift the right strand to the central and connect 2 strands in 1, then we continue weaving with 2 strands.

Start back

Select strand of hair and divide it on 3 strands.

Make 3 oscilutes, right strand under the central, left strand under the central.
Then connect 2 strands to one, i.e. It turns out right strand 1.
From the edge of the right straight, we allocate a thin strand and put on the left under the bottom and add pickup from the free hair.

Peer 8-10 cm, then start pulling out the strands to give the volume.

The secret of pure weaving: pour the mousse into the container, pick it up with a small tip of a sharp tip and spend the braid on the links, so it turns out a cleaner and neat weaving, and sticking tips are hiding, due to adhesion to the spit. Mousse score on a little bit, because He quickly melts.

Make everything strictly according to the instructions described, because The head of the mousse in the hand will quickly melts, and when applied with fingers, the hair sticks to the hands.

How to weave a fishety tail: step-by-step instructions with photos for beginners, as well as video and scheme

Prepare for work: Wax, 2 Combs - brush and with a subtle tip for the separation of a strand, a rubber for tie braid, varnish.

Squeeze your model and ask a slightly backpill head back. The level of her head should be comfortable for your hands and torso, so that you have not had to lean or stretch - it will lead to fast fatigue and discomfort.

The second option is to sit on the sofa or stool, and the model can be put in your knees, so that you are comfortable.

Pre-draw your hair and slightly treat with wax or for a child with a water.

So that the weaving is beautiful and neat, we divide the hair so to separate the rectangle
In the middle of the head. We divide the allocated strand to the same 2 parts. At the same time, the left divide into 2 parts. It should turn out 3 strands of photo 1.
Divide the selected strand at the forehead into two equal parts. If the model has a bang, highlight it at will.
Left part divide once again in half. You have 2 small in your left, in the right 1 large in photo 2.
Two strands are kept with your left hand like this: the index and large holds extreme, but the middle Nameless and Mysinic. Large left strand hold the whole hand.

The right strand put on the middle and transfer to the left hand, with the right hand, with the help of the index and thumb, clamp these two strands in the place of crossing.
Left strand put on the middle and transferred to the right hand, keep 2 strands in the right hand.
As a result, 2 equal strands should be obtained, of which we will weave.

Place your left hand under the strand, and the index finger of her under the braid, the big one holds the place of weaving is not allowing dissolution.

With the right hand, the index finger separates the strand of the hair and transferred to the left strand at the same time by pushing it with the middle finger of the left hand. The separated strand of narrow, exactly the same and pickup.
We add pickup, we carry out it with the help of a tip of a car or index finger, but in 2nd it will not work so smooth and thin. Well read the pickup, if the hairs sticks out in some places, put them in gel.
Take the right strand to the right hand, at the same time you clap our pickup. Similarly, we separate the left index finger a small strand, only on the left. At the same time, the right hand is located as follows: the index finger under the oblique, and large on the place of weaving. The left strand let go and shift the separated part into the right hand, similarly make pickup and put on the middle finger to capture.
Next, repeat the actions in the same way. Working with 2 strands. Photo 4 - This takes part of the strands and capture it, setting up hands and fingers How to pick up the separated strand, photo 5 - we took the pickup and laid out on top of the separated strands. Photo 7 - Holding strands after suping right strands. 8 This is working with the left strand, part of the strands are laid on top.

A strand basic is flat, the department comes from major strands only around the edge.

Having reached the top, your spit will begin to overtake pickups, i.e. Spit on the Makushka, and pickups take below the braid level, then take pickups not from the edge of the hair, but slightly closer to the spit, leaving the front part of the curls not touched.
Thus, it is necessary to supplement the braid to the level of our last pickup. Make sure that the braid is accurate is accurate, to do this, sighing it and take pickups exclusively to the spit, not lower.
When Spit was leveled with the level of pickups, now we take strands again from the very edge of the hair growth.
We continue to weave the braid to the Niza himself, while strictly repeating the shape of the head, making the braid close to the head.
Tighten the pickups to the head well, thereby allowing to avoid the rapid "breaking" hair.

Check it is quite simple, look at the bottom strands, where there are pickles, there should not be hanging strands, everything just repeats the shape of the head.
The pickles are over, we are wearing only from 2 strands, separating parts from the edges and shifting to the opposite part.

The separation of strands across the edges makes a spit drawing in the same one with 2 sides.

So stand up to the end of a fishtail and tie a rubber. Frame slightly smoothed irregularities, the teeth will not turn deeply, but they put at an angle. Then we find the place where there are roosters and a sharp tip of the hair growth in hair growth is not deep to the spit. Roosters are cleaned. Sprinkle with varnish.

Laco Create a cloud at a distance of 30-40 centimeters. Splashes to the emphasis will make the look of the hair with a droked and dirty.

Step-by-step instructions with explanations in video format for beginners and experienced craftsmen:

Learning to weave the classic option on the model from the tail

On model with pickups

To kid

To myself

You don't always want to ask for someone to braid, but your hands are always with you and they are ready to help you, you only need to teach them a little to fulfill simple step-by-step movements.

How and what?

Prepare: 2 mirrors so that they stood against a friend or a tremor, a comb with a thin tip or pasta, hair gum.

It is important to put mirrors so that you see your weaving in the process, so you can remove roosters or align weaving.

Become as you comfortably and spread the curls, then lift your hands up and take them into the hands touched your head.

Pay attention to the photo, they are step by step, so you see that you have behind your back when you are weeping.

Video on weaving braids Fish Tail itself:

How to make a side?

Combing your hair and divide into two equal strands.
Put all hair to the side of any of the sides.
Holding both strands in your hands, separate the index finger a thin curl from the edge of strands and shift onto the second.
Operation repeat on the left side.
To understand, you need to repeat. Separate, shift, capture, separate, shift, capture.
On the right to separate, shifting, separating the left, shifting. So, repeat to the end of the braid, tie a tail with a rubber or hairpin.

On myself

The second option with the beginning of the temple

With pickups across the head

Pickages are made from the side parts of the head, and not separated from the separated strands.

So we repeat the operations until the end of the braid, tie a rubber band.

Secret:the thinner of the strands and the same thickness, the more beautiful and evenly your braid. Thin curls will make it longer, and fat - like french braid.

On yourself classic all over his head with pickups

With rubberbones

To create such hairstyles need: Rubber, Comb with a thin tip, Hair middle length or long.

Carefully combing curls. Select a strand from the forehead and tie a tail with a rubber band. Remove it out. Slightly pull up pulling up for 2 parts of the tail.

Stretching is done at the same time so that they are separated and looked like a fishtail.

Separate pickups from 2 sides with your fingers or a thin end of combs. Collect them along with the previous one and also twist, stretching it around its axis. Tighten it up. Then we stretch the side parts slightly, giving a similarity to a fish tail.
We repeat: we collect the tail, add pickup, tie the tail, turn out, we stretch.
So repeat to the neck. In this place we repeat the same way, but already without pickups.

Spit lasts long, although it seems the impression of lightness, airiness and negligence, but it is deceptive. Even an active child, it looks as if she did not have done it for a long time.

Having reached the very last section, tie and turning. We correct the previous strands, giving them more and efficiency.

On the contrary: description, photo, scheme yourself and on the model

The difference between the reverse fish tail in placing strands, we put them down under the bottom, i.e. It turns out the braid appears in our strands.

It is very clearly visible on the video, so see the option of weaving on the model, there it is visible better than yourself.

For weaving reverse braids, a fishy tail Cook: comb, rubber, water in a spray.

Step-by-step video from the lights of Rush on weaving reverse braid Fishe tail on yourself:

Option on the model:

On yourself a reverse fishe tail with pickups

On the model inverse fishe tail

Double fish tap

When we separate the strands and shift and on the inner and outer part of the braid.
Spit with released strands, i.e. You break the spikelets, every strand I make one narrow strand. Shooting occurs in the same way.
The remaining free strands turn into another French braid or spikelets.

Double Spit Fish Tail

Unusual version of a fish tail dual

How to make a bulk braid fishtail?

in this article.
Pull out the strands, moving from the bottom up, giving some dishevement of the spit and the volume at the same time.
The thinner the strands of your braza, the thicker it becomes and more of her links and the longer it will work out.

Options Hairstyles with weave Fish Tail

From the tail of the photo + video.
From the tail tv.
Fishe tail on the sides of the head + are collected in a common braid from Lily Moon.
Fish tail basket throughout the head.
Fish tail, passing into a bundle.
Fish tail - hoop with loose or collected hair.

Hairstyle based on fish tail

Malun with weaving on short and medium length

Weaving option that will delight owners short hair And to the shoulders. Try the magic of this weaving and create an independently beautiful hairstyle can even beginners. 5 minutes enough to go to work, school or kindergarten With new hairstyle. Baister!

Carefully disperse curls. Separate the strand of hair in the area is necessary forehead. If you have a bang to release it.
Divide the strand into 2 parts. Separate the index finger to strand strips from the left outer side and put on the right strand to the right hand.
Separate part from the right straight and attach to the left, shifting into the left hand.
We begin to add pickups, but do it not all my head, but only at the bottom of the hair growth near the face. We put the left pickup on the right strand, separating the pickup on the right to put on the left strand.

Weaving occurs only by pickups, pay attention to it.

As you can see in our weaving process, only 2 are strands that use the strand strand always on the opposite direction. Repeat weaving to the area on the painter or the desired length.
Having reached the area behind the ears, plenty without pickups, i.e. Having a part of the strands from the main strands and shifting to the opposite. It sounds like this: Separate the part with the right straight and put on the left, separate the part from the edge of the left strand and put on the right.
Having made a few links. Lock the braid with a thin rubber, thoroughly draw the tail and tighten the weaving up moving it from the rubber, and even slightly pulling the strands from the braid to give it the volume. At wishes, we have a braid to the end and there they make a rubber band.

Educational video for creating a hairstyle Fish tail for short hair and medium length:

Video teaches to braid a fish tail and make it with free links:

Fish Tail with large sections

Separating a strand of hair on the top of a finger from the temples to the top of the top.
Collect all the separated top hair and start wearing a fishtail by separating strands from the edge and shifted on the opposite strand. Separate on the right side of the strand and shift on the left, separating from the left strand and shift on the right. Try to take the same strand.
Having done 5-6 binding to keep the braid in your hand and stretch slowly the links in different sides giving them volume.

Why can not stretch strands after you got all the braid? Because the spit will not be uniform and difficult to pull the strands, then you will have to be down from top to bottom, but only from the bottom that is not very convenient.

So repeat the weeping 5-6 units without stretching, then 5 more links and already stretch. Optionally, make zones with stretched links more or less, more often. Experiment. What option do you like more.

Watch out for the symmetry of stretched strands and braid itself so that it is uniform.

So we continue to spit until the end of the braid, in parallel stretching strands. When you get to the end, tie a rubber thorough to your hair.

Mega volume

Separate strand in the middle of the head and divide it on 3 strands. We carry out one carrier, fold 2 strands into one and further continue weaving from 2x strands.
Separate a thin strand and it goes to the opposite side, we highlight it with the index finger, shift and pick up the middle finger the second hand. Fish Tail Reverse, but the braid itself weave in inside, and pick up the pickles.
Separate a strand of hair from braid, we shift on the opposite, take pickup and shift to the opposite strand under the bottom, under the oblique. Hold a big and index finger to the braid itself in the place of weaving so that it does not fall apart.
Make 5-8 carriages and pull the links. It is important that the links pull not everything, but with the intervals, it will turn out more effectively and volume. As a result of such a weaving, not elongated links are obtained, slightly elongated and very large.
So with pickups wept to the nape, follow the spikelet to be with the head, repeating its shape. Further weave without pickups, similarly pulling the strands in chaotic order making gaps.

Make in the form of the elevated Christmas tree or butterfly, by adjusting the pullout.

Tie a rubber thing when you finish to the end, hide it simply by turning the strand and consolidating the invisibility from behind.

At the end of the weaving, reduce the size of the drawn links so that the braid comes to not and looked more effectively.

Spit is ready, do not process the hair on the child, and we spray with a varnish.

Video on weaving openwork braids with step-by-step explanations with mega volume:

2 braids back to themselves

Two braids beaten

Classic with a turn or snake

Option of weaving with one turn, if you wish, make turns somewhat, and step-by-step video It will help to braid it on your model.

Now you know how to weave a fishe tail, we hope that step by step instructions With photos suit even for beginners. We wish you good luck in weaving and inspiration! And let all familiar envy your bulk fish tails!

Leave your comment

How to weave a fishtail, many fashionista know. Pretty haircut Enjoy popular due to originality and festivity in many young girls. It is stylish, does not injure her hair and keeps the form well, has many versions, suitable for any case: and for every day, and at a solemn event. Even if such a braid is a little brewing, it won't hurt her light carelessness.

Who is suitable for weaving "spikes" or "Fish Tail" in the form of a face, color and type of hair

The hairstyle of the "fishe tail" or "spikelet" is suitable for almost everyone. The only condition for its creation is sufficient for weaving braids hair length. But even girls with short haircut Can take advantage of the overhead strands.

Like any braid fish tail best weave on straight hair equal length. However, the owner of climbing hair can make it, pre-straightening them with an iron. If you leave hair wavy, the braid will look more air and careless.

With a stepped haircut, the effect of negligence is also possible due to the fact that due to the unequal length of strands, part of the hairs will be knocked out of the braid. If this wants to avoid, you can fix the hairstyle. And you can rub the braid on the back of the head, leaving the side strands free.

It looks very beautiful, such a hairstyle looks at the milled hair, in this case the effect of light glare is created.

Stylists give advice as using different options Hairously you can visually adjust the face form:

the round face is visually elongated braids braked on both sides;
the rectangular face will soften the braid of the side, especially if it releases separate thin strands from it;
the same free strands will suit the owners triangular faceAt the same time, the braid is better to begin to weave not from the top, but from the nape;
massive chin balancing high laying and braid laid around the head;
with long I. narrow face Before laying, you need to free hair, and after the end of the weaving, add a hairstyle volume, stretching out of spit from braid.

Required tools for hairstyles "Fish Tail"

To create a fish tail, complex devices will not need. Combs and rubber bands are sufficient to fix the finished hairstyle. Curly hair Before weave the fishe tail, straighten with ironing and additionally fixed with varnish or spray. When the hairstyle is done, at first it may also need a mirror, it is desirable - three-risk, or two, one against the other, so that you can see the hairstyle from the sides and with a nape.

In the future, with the development of skill, movement will be automatic. Even if the hairstyle does not come out so neat, as I wanted, it will not spoil her light carelessness. So that the hairstyle looked more elegant, use hairpins, additional rubber bands and other hair accessories. When creating complex stackings, which are based on a "fishe tail", studs will be required.

Step-by-step scheme: How to weave a classic fish tail

There are two main techniques weaving braids "Fish Tail" - with pickup and without pickup. The first one usually begins with a crown, the second closer to the back of the back. Weaving with pickup slightly more complicated, but with him hairstyle keeps stronger.

General rules when creating such hairstyles:

Before weave the fishtail, hair must be carefully combed.
When weaving, the strands are pressed against the head, sometimes slightly pulling down.
Snadders should be the same thickness.
The thinner will be strands, the stronger the braid will hold.

How to weave a fishe tail With pickup:

Three strands are separated on the dark part of the head and crossed together 1 time, as when weaving ordinary braids.
Thus, two strands will turn out: the upper and lower out of the three form one part of the future braid, and the strand missing between them - the second.
From the outdoor part of that spin, which turned out to be at the bottom, separate a thin spin, to which part of the free hair is added from the same side. The shaped common strand is echoing on top to the other side and connect with opposite strands. At the same time, it is taught inside and down.
Now, from the opposite side, two narrow spars are also separated - one of the already formed, and the second of free hair - and in the same way they crosses it with already existing strands.
When all loose hair is taken into a braid, you can fix the hairstyle or continue weaving. To do this, thin strands are separated from the outer edge of the spit and alternately reck on the opposite direction.

Weaving spikes without picking up:

Hair is divided into two equal parts. If accurate laying is required, you need to make a clear probor. For a more negligent option, it is enough to push the strands in half.
After that, a thin strand is taken from the top exterior edge at the level of the temple, which should be carried out above the separated half and start it under another.
Then the strand from the opposite side is also brazed.
Thus, the strands consistently intertwined to the desired length, after which the end of the spit is fixed with a rubber band.

Mappy Fish Tail from horse tail, Weaving scheme

Fishe tail can be braked not only on loose hair, but also pre-gathered the hair in the tail.

This option has several advantages:

if smooth laying is required on the top of the top, it is easier to achieve;
such braid is easier to brake, especially on long and thick hair;
this method reduces the length of the braid, which is important in cases where it is necessary to open the neck and shoulders.

Weaving spikelet from a horse tail is similar to the process of classical weaving without picking up:

hair is divided into two parts;
from the outdoor side, thin strands are separated and consistently rented on the opposite direction;
the tip of the braid is fixed with a rubber band.

Spit Options Fish Tail with Flusted Hair, Photo Instructions

If you do not want to completely remove your hair into the hairstyle, you can braid a fish tail on semi-print hair. In this case, only part of the hair is closed in the spit - either strands from the sides to open a face or from the top.

At the first embodiment, the braid will serve as a peculiar rim under which free hair is hidden. Such a hairstyle will preserve the ease of loose hair and at the same time will not allow them to fasten.

In the second case, the braid will lie on top and recorded only hair in the temple zone. In the second case, for the convenience of laying, the hair can also be pre-assembled in the tail and grind up with a rubber band.

If the spit woves their two strands, taken from the temples, then each of them is pre-twisted in a non-native harness. Both harnesses are connected in the area of \u200b\u200bthe nape into one strand, after which the fish tail is started to weave classic way. For convenience, the hair at the scene can be temporarily grabbing with a rubber band.

When the hairstyle is ready, the gum is neatly removed. Another option is hairstyles - each strand is brazed in "spikes", then the pigtails weave to the nape, after which they are connected in one. Such a hairstyle is a combination of a "fish tail" and "Malwinka".

After the pigtails are connected together, the free ends of the hair are combed. If you want to hide the gum at the junction site, it is wrapped in strands of the hair and fix the free end of the invisible strands.

How to heat the braid on the side in the technique of fish tail

To heat up the side of the side, you need to split the hair on two strands and throw them on one side. At the same time, the braid begins to determine the bottom, in the ear of the ear. For convenience, you can hook the hair into the tail, using a thin pharmacy gum for it.

After the spit is ready, the rubber band is cut and the base is tightly straightened. The side on which the Spit rifts usually depends on the leading hand: for the right hand, for the left, respectively, the left.

For more complex and interesting styling, weaving is used from the temple:

It is necessary for his forehead two thin strands and a pigtail, leaving the sideways, until the middle of the ear. The strands should be thin.
The tip of the resulting braid is temporarily fixed with a rubber band.
Free part of the hair is divided by half.
From the braided braids remove the gum, and they attach strands of braids to free strands of hair.
Spit woves on in classical technique to the desired length, the end is fixed with a rubber band.

How to make a fish tail on the contrary (inverse braid weaving)

To make a hairstyle more interesting, you can braid braid in the reverse order:

Three strands of the hair are separated on the top and crossed as if the ordinary braid were spinning, but it is necessary to miss strands not one another, but to carry out them from below. It is enough to do this once so that there are two strands of different thickness in the hands.
We take a narrow strand from the side of a thinner strand, we hold it under the main strand and attach to the second part of the hairstyle. At the same time, a narrow strand of loose hair is taken from the same side.
We repeat the operation on the other side.
So, skipping narrow strands on each side one under the other, weave the braid.
When free hair is over for additional pickups, weaving continues on the already formed spit. The end of the braid is fixed in any convenient way.

It is important to skip the strands from below, it is this that will give hairstyle peculiar convexity and volume.

Such a spit looks as if lying on her hair from above.

How a fish tail awesome around the head in the shape of a wreath, step-by-step lesson

Fish tail can be laid around the head. For this, weaving start at the temple and lead him to the side of the forehead. In this way, it is possible not only to lay the hair with a wreath, but also to create complex patterns: zigzags, "snails", etc.

An easier way to put a braid in the shape of a wreath:

Save the "fish tail" on the side, ranging from the ear, as when weaving braids side.
Raise the braid and lay the forehead in the shape of a wreath, fixing with stiletts.

You can complicate the hairstyle, throwing two braids: one is stacked by a semicircle necessary forehead, the second in the same semicircle on the back of the head. Conaches are fixed with studs or invisible. Thus, the braids form the ring around the head.

Photo scheme: how to braid two pigtails

There are two options hairstyles with two pigtails "Fish Tail":

Two symmetric braids on both sides of the face. In this case, the hair is divided into two equal parts, each of which is alternately swam in the fishe tail technique. You can start the weaving from the temple or from the bottom of the ear.
Two braids walked from the temples. In the area of \u200b\u200bthe nape, they are connected together with the help of a gum, the resulting tail is combed.

Such a hairstyle is particularly well suited to the folk style and the "Country" style.

Triple Fish Tail

Weaving technique such a spit differs from the classic "fish tail":

Carefully cleaned hair is divided into three equal parts.
Each part is thrown into the usual braid of three strands. At the same time, the average braid begins to weave a little lower than two side.
When braids are ready, they are gossip in one as a classic way. Due to the fact that the beginning of the side brass is higher than the average, the base of the common braid looks like a semicircle. Especially beautiful such hairstyle looks on thick wavy hair.

More effectively looks like a weaving using ribbons.

Weaving Fish Tail with Trets, Photo

The original option can be admitted in the process of weaving. In this case, the braid begins to form from the top.

Only central hair is woven into it, and the remaining strands from the sides are captured in the tail and are added to the braid through certain intervals. The amount of little breath depends on the length of the hair, usually do it 3-4.

How a hairstyle of a fish tail with rubber bands

In the process of weaving, the hairstyle can be intercepted several times with rubber bands, then continue weaving.

How to make a braid "fishe tail" volumetric and fluffy

Hairstyle Fish Tail does not harm light dishevement and negligence. Moreover, with its help you can visually give volume and puffiness even thin and rare hair. For this, hair in the process of creating hairstyles shut freely. When the spit is ready, the strands are slightly pulled out. You need to start doing it from above.

If the volume effect is needed, the spikelet link must be pulled out entirely. When pulling small number Hair from the edge of the spit level will look like an openwork.

Original decoration of pigtails Fishe tail colored shallow hair

In this hairstyle, it is especially impressive. If the hair is not painted or painted in one tone, it is possible to achieve a similar effect using temporary staining, for example, shallow.

Recommending how to weave the fishtail, you can paint the strands both separately and after weaving

You can paint separate strands before you create a hairstyle, or walk with chalks from above, when the Spit will be ready.

What accessories are suitable for hairstyles Fish tail, photo

For the everyday version there will be enough gum. However, since we can weigh the fish tail you can different ways, And every time it will look different, to make a hairstyle you can choose a variety of accessories.

Depending on this, the image will be more romantic, bright or even informal. For decoration, you can use hairpins, beads, studs, flowers, ribbons, feathers - how much fantasy will allow. The main thing is that the decorations are combined with a general way.

How to braid fish tail myself

Before starting to weave the fishe tail, you need to understand how this is done, and work out the technique of movements.

To do this, it is best to first take off on another person or on a doll. The option is hairstyle chosen on the basis of the desire and level of skill. For convenience, you need to observe simple rules:

At the beginning, hair is combed well.
So that the hair is not fused and were obedient, they need to be slightly sprinkled with water.
Until the skill is not developed, it is necessary to ensure the possibility of visual control over the process. For this, a three-risk mirror is best suitable or two mirrors installed against each other.
So that it was possible to grab the hairstyle during the weaving, if you have to dare to an unexpected phone call or if you just get tired, you need to prepare the crab hairpin in advance.

Weaving "Fish Tail." Video lessons

The first video demonstrates a technique that will teach you how to weave a fishe tail:

In the second roller, the girl shows how to weave the fishe tail itself:

Weave such a stylish hairstyle as a fishtail, with a small skill is easy and fast enough. Therefore, it is worth spending a little effort to master the technique of its creation, because it looks much more interesting and more attractive than the usual braid from 3 strands. And numerous laying options make it universal and practically unique.

"Fish Tail", externally reminiscent of real fish, looks stylish and very cute. It has already been rated not only ordinary girls, but also the representatives of the starry world. So why don't we know how to weave a fishtail?!

Who fishes the fishe tail?

The best model for this braid will be a girl with perfect chapels - straight, tough, thick and enough long. But this does not mean that strands of medium length or light curls are not suitable for this beautiful hairstyle.

On them, hairstyle will look even more interesting, however, as on Melted or colorful strands. Moreover, girls with thin and liquid hair can also look at the "fish" spit, because it is not better to hide these nuances.

Getting ready for braid

Hairstyle Fish Tail does not require complex tools and devices. Everything you need is found in the closet of each of you. It:

Thin gum of any colors;
Massage brush;
Varnish, mousse or any other means for fixing hairstyles;
Elements for decor - Flowers, ribbons and other decorations;
Mirror - preferably two.

Learning to weave braid

A simple, but very fashionable "fishe tail" exists at least in three versions. Consider them in our detailed master class.

Option 1

We put the mirrors opposite each other. You must see the reflection of the back of the head.
Carefully comb your hair with a brush and divide them in half.
On each side, we choose one thin strand (about 2-3 cm wide).
We cross them among themselves.
Holding the weaving with one hand, the other allocate the same strand with one of the sides and cross it with the top braid.
Change your hand and separate the strand on the other side. Cross it with the previous one.
We perform a braid to the desired length, alternating side and crossing strands.
The tip of the braid tie a rubber band or pinned with a hairpin.

Option 2.

1. My head, lubricate the strand to the mousse to give volume and dry them with a hairdryer.

2. Those thoroughly comb your hair with a brush and collect them in a horse tail.

3. We carry out the scheme known to you.

4. The tip of the braid tie a rubber band or pinch the hairpin.

Option 3.

My head, lubricate the strand to the mousse to give the volume and dry them with a hairdryer.
Pretty combing hair with a brush.
The first subtle and symmetrical strands are selected from the temples.
On the back of the head we cross them between themselves.
Holding the weaving with a free hand, the other separating the left temple another strand.
Cross it with top.
We change your hands and separate the same strand, but on the right.
Cross it with the previous one.
We perform a pigtail to the desired length.
The tip of the braid tie a beautiful rubber band.

The location of the braid is completely dependent on your flavors. Let it be in the center, turn on the side or swipe zigzag all over your head. And you can also braid two braids, if the density of the chapels allows you to go to it.

Decorating fishtail

Now you know how to braid a braid fishtail at once in three versions. It remains to decorate the hairstyle with live flowers or studs with a decor. Suitable for these purposes and various ribbons, laces, chains, rhinestones and feathers woven into the spit together with hair. The brand itself can be both very tight and neat and free-romantic. In the latter case, it is necessary to stretch the slices a little, giving it an opening look.

Knowing how to properly braid "Fish Tail", you will be irresistible on holidays and on weekdays. Dare and stay in a fashion trend!