A penguin made of plastic bottles will become a worthy part of your interior or garden decor. This is a charming and relevant element, especially in the winter season, it can be safely put under the Christmas tree. And the kids involved in the process of making a penguin will get a lot of positive emotions.

In this master class, the whole process of creating an original craft is described in detail!

To create a Penguin, you will need quite a bit:

- three plastic bottles of any size;
- acrylic and emulsion paint;
- scissors;
- kolinsky brush or synthetics;
- pompom;
- foam sponge;
- glue.

To create a blank, you need to carefully cut two bottles in half. To do this, you need only the bottom of the bottles.

From the third bottle, cut out, according to ready-made patterns, the wings and legs of the penguin.

The base of the parts is extended by about 1 cm.

Here's what should happen.

If one of the parts is hard to fit on the other, you need to make a small incision.

The wings are inserted overlapping the top of the bottle and the bottom. To fix the legs, two small holes are cut in the bottom, into which the legs are then inserted.

We cover the entire area of ​​​​the product with white water-based paint.

It is necessary to prime the craft in two layers. Due to the density and density of the paint, you get such a texture.

While the soil dries, you can cut a scarf from a plastic bottle. Its ends are cut into small strips.

After the soil has dried, with a marker on the workpiece, you need to sketch the contour of the eyes, beak and breast.

And after that, you should start color painting ...

First, the penguin must be painted in primary colors.

Each layer should dry well, if non-painting and bald spots appear, you can cover the craft several times.

The contours can be drawn with an ordinary black marker, on top of the already dried acrylic paint.

As a result, the craft takes on a complete look, it remains only to attach the pompom.

If you wish, you can make a pompom yourself or take a ready-made one (as in this case).

With the help of glue, the pompom is attached to the hat of our penguin.

And the product has acquired a final, complete look. It turned out such a wonderful little penguin in a hat!

The final look of the craft.

The process of making crafts with your own hands is absolutely not laborious, and also does not take much time. Boldly experimenting, you can get a very original thing that will decorate or complement the interior, bringing a special atmosphere and comfort to it!

And as for the environment around us outside the house, then for it we can make a very original birdhouse from a plastic bottle, which will be of great benefit to birds that do not fly away to warm lands for the winter!

To create a northern atmosphere, you can build a stone hill, paint it white and arrange crafts at the foot of the mountain and at the top.

You can place them near flower beds, near a decorative pond, just plant them near the path or near the house.

You can glue the craft on a wooden stand and glue it at your feet with crushed foam, imitating snow. So the penguin will hold on stronger in windy weather, and there will be a feeling that he is in the snow.

Wherever you fit the craft, it will decorate any place.

Materials and tools

For the penguin figure you will need the following:

• plastic bottles (2 pieces for one penguin);
• scissors;
• glue;
• paints;
• cardboard;
• pencil;
• compasses (if you know how to draw even circles, you can do without it);
• black marker;
• Knitting thread.

Do-it-yourself step-by-step instructions for making your own and the rules for operating a pond filter are described in.

Want to get rid of weeds in your yard? Do it with .

You can paint the blank with acrylic paints with a brush, or you can use a balloon. What kind of paint is, and use this. For coloring you will need white paint, black, orange or yellow. And a couple more flowers to decorate the hat.

If you want to decorate a penguin, you need to stock up on rhinestones, beads and a ribbon or a thin piece of material that will act as a scarf.

Manufacturing instructions

To create a penguin figurine, follow these steps:

1. When everything is glued together, you can start coloring. Color the entire craft in white. On white paint, all subsequent colors will look brighter. Leave until completely dry.

   

   Coloring the shapes white

2. With a black marker, draw the outline of the belly and muzzle. Draw eyes - two circles.
3. Use orange paint to paint the mouth and beak of the penguin.

   

   Draw the eyes and beak of a penguin

4. Take black paint and paint over everything except what is inside the outline, and do not touch the top, it will serve as a hat. It will then need to be painted with bright paint.
5. Choose the paint colors you like the most and paint the top. You can paint the entire top with one color, for example, blue, and draw a pattern (circles, stripes, rhombuses) with yellow or white. Get a fun hat.

   

   Thus we color the figure of a penguin

6. Now you need to make a pom pom for the hat. Draw a large circle on cardboard and cut it out. Inside it, draw another small circle so that the walls are thick, and cut it out. You should get a wide ring. In the same way, cut out another ring.
7. Fold them together and gradually wrap tightly with knitting threads. The threads will need to be constantly shifted towards each other so that there are no gaps left. So the pompom will be more magnificent.
8. When the rings are completely wrapped, you need to take scissors and cut between the circles. Not on the inner circle, but on the outer. Move a few skeins so that you can slide the scissors through and carefully start cutting in a circle.
9. When the top circle is cut, take a ball and cut off a short thread. Insert this thread between the cardboard. Now you need to tie it in a knot and tighten it.
10. Remove the cardboard circles, tie a couple more knots and cut the thread shorter so that it does not stick out and spoil the overall appearance. Straighten the knitting threads - the pompom is ready.

    

    Cooking pompoms for penguins

11. Glue the pom pom to the center of the hat.

    

    Glue the pom-poms and your penguin is ready.

The penguin is ready, you can decorate the hat with rhinestones, and tie a scarf around your neck.

Instructions for making a penguin from a plastic milk bottle

You can make a penguin with arms and legs out of a plastic milk bottle.

This do-it-yourself plastic bottle penguin also does not require much time and certain skills. For him, you will need a bottle of milk, the same set of paints, a marker, colored cardboard, glue and scissors.

Read about planting, care and treatment for verbena diseases.

Armed with the necessary materials, you can start creating a penguin with arms and legs:

1. Take a 1 liter milk bottle, turn it upside down and color it in the same way as the previous penguin. First, paint the entire bottle with white paint, then draw the outline of the belly and head with a marker, and paint everything outside the outline, including the lid. You don't need to leave anything for the hat. Important, the bottle must be turned upside down, where the cap is, there will be legs.
2. While the penguin dries, take the cardboard and draw blanks for the paws on it. Well, if the cardboard is black, if not, then paint it with black paint. You should also draw a beak and legs (paws) on cardboard and paint them in yellow or orange.
3. When the blanks are ready, glue them to the body: handles on the sides, legs on the lid, beak on the muzzle.
4. Draw eyes with a marker or paint.

Garden crafts in the form of penguins from plastic bottles are probably the simplest figures, (on) as much as most plastic bottles have a "penguin" shape.

All you have to do is polish and touch up the crafts a little to get wonderful penguins that will perfectly decorate your area. Made penguins can be installed in a corner to make them feel more comfortable, and again on a stone or alpine hill, very small penguins will perfectly decorate the cella of any room.

More spectacular penguins will be obtained if you use larger plastic containers. It is best to use containers with a volume of 10, 12 or at least 15 liters for the manufacture of penguins. If you didn’t find bottles of such a volume, in this case you should not abandon the idea of ​​​​making this craft, as at least make small penguins, which can be successfully placed on stands made of stones. Get a system of penguins. If there is one large bottle and several small ones, then you can fuck up one adult penguin and a bunch of his kids.

Materials and tools

For work we will need:

• plastic bottles, at least from Coca-Cola;
• glue gun;
• acrylic paints in white, black and red;
• varnish, also acrylic;
• primer;
• black marker;
• fabric strips.

How to make a penguin from a plastic bottle?

It is necessary to cut off the neck of the plastic bottle in such a way that the narrowing remains remain intact. Now the body of the penguin is almost ready.

To make a penguin head, you need to take a bottle of the same size. For this, a bottle of 1, 1.5 al2 liters is suitable. It is necessary to cut it into two parts so that the upper share is with a small margin, for a tighter connection of the parts.

With the paws of penguins, in total, there will be no difficulties, since all plastic bottles have a wavy bottom.

Sometimes all the details for crafts will be ready, all that remains is to fasten them. For these purposes, a glue gun is ideal for us, but this must be done carefully so as not to melt the plastic blanks. If there is no such glue at hand, you can connect them as follows: you need to make holes with a hot nail in those places where it is needed, and stretch the wire through them. Unfortunately, such an illiterate option will be very beautiful.

We give the penguin naturalness, for which it needs to be painted. For the benefit of whom this will need paint of three colors - red (for paws and beak), white and black. In order to color the penguin, acrylic paint is best, as it will hold on to the penguin well under the scorching sun and pouring rain. In order for the paint to lay down well and evenly, the surface must be primed.

To beautifully draw a penguin's brisket, we will make a blank from paper, which we apply to the blank and circle it with a marker.

We paint over with white paint the scotoma, which we drew with a marker.

The body and legs need to be painted with black paint.

You and I will paint the cap red. Although any other can be used here, for example, egg, blue, green, etc.

You can decorate the hat in any way, for example, simply by putting dots in a different color.

Please someone) beak you need to pick up something sharp. One of the easiest options is a fully sharpened wooden peg. And you can even just paint it with paint. We also draw eyes.

(the tongue only dries the paint, the craft needs to be opened with several layers of varnish.

But this is not all. For a hat, it is tedious to make a pom-pom. You will need an exceptionally thick thread for knitting. How to do this, see the photo.

And the swan song decor element is a scarf. We take any strip of fabric and wrap it wherever the penguin's eyes look.

To make the scarf more natural, we make serifs at the end.

Let's say how penguins from plastic bottles are very light, they need to be somehow fixed in place. They can be nailed or tied, or simply weighted down. To do this, you can pour sand or small pebbles inside the bottle.

In this tutorial we will learn how to make a funny penguin out of plastic bottles. For this we need:

Tools:

• hot glue gun
• Scissors

Materials:

• 2 plastic bottles of the same size
• acrylic paint (black, white and any colors)
• black cd marker
• clear nail polish
• primer
• woolen thread and a piece of cloth

Step-by-step instruction:

1. Wash and dry bottles. Cut off the bottom of one of the bottles. Cut the second bottle in half. For further work, we will need the bottom half of one bottle and the bottom of the other.

2. Fasten the 2 parts by inserting one part of the bottle into the other to a depth of about 2 cm. Mark the edge that we need to grease with glue. Disassemble the parts, grease the edge of the larger bottle with glue (up to the mark) and “put on” the bottom of the second bottle from above again.

Try to apply a small amount of glue, a few drops will be enough, while monitoring its temperature so that the plastic does not start to melt.

4 . Take a sheet of cardboard, draw the belly of the future penguin on it and cut it out along the contour. Attach the finished template to the bottle and circle the outline with a black marker designed for CDs. Paint the entire belly white. Try to paint carefully so that the black outline remains unsmeared. Apply several coats of paint.

5. Paint the legs and body of the penguin black. Wait for the paint to dry completely. If necessary, touch up the contour of the abdomen with a brush. Now we will draw a cap of a penguin. Choose the color you like and paint the hat with it, then decorate it as you like. After that, draw the eyes for our penguin and the beak.

6. Wait until the paint is completely dry and to fix the result, apply a layer of clear varnish.

7. If desired, you can make a pom pom for a hat. To do this, wrap 2 fingers folded together with several layers of thread. The more turns you make, the fluffier the pom-pom will look. Remove the skein of thread from your fingers and tie it with a thread in the middle. After that, carefully cut the loops and if there are protruding threads, then trim them.

Next, we will show you how to make a penguin from a plastic bottle quickly and easily. Such an interesting craft is sure to become a real "highlight" of your garden and take pride of place in a flower garden or next to an artificial pond.

Master class: funny penguin from a plastic bottle

In order to make an original garden penguin figurine, you will need the following tools and materials:

• 2 l plastic bottle;
• acrylic paints (black, white, yellow);
• toy eyes;
• black cardboard;
• glue.

So, let's look at how to make a penguin from a plastic bottle. Take a transparent container, wash and clean it from paper labels. Now pour black paint into it and close the bottle with a cap. Gently shake the plastic container so that the paint gets on all the walls of the container. After that, open the bottle and leave it alone for a while.

Charming crafts from plastic bottles: do-it-yourself "penguins"

While our workpiece is drying, let's take care of the wings of the penguin. Cut out two oval-shaped pieces from thick black cardboard. This will be the wings. Now take white acrylic paint and draw a bird's belly on the outside of the bottle. We will decorate the beak and paws with yellow paint. Glue the prepared wings. That's all, the penguin is almost ready. It remains to attach toy eyes to the muzzle of the bird. If you wish, you can decorate the craft with sequins, beads or fabric. Now you know how to make a plastic bottle penguin. Actually, it's not difficult at all. Even a child can make such a craft, of course, under the supervision of an adult.

Create a beautiful black and white bird from improvised materials

If you want to revive and diversify the interior of your home, pay attention to this simple master class on making a penguin from a plastic container. The product is attractive, bright and very colorful. To complete this craft, you will need two identical bottles, glue, strips of fabric, a marker, leftover yarn in different colors. First, thoroughly wash and clean plastic containers from stickers. Then cut the bottles as shown in the picture.

Insert the resulting parts into each other and glue them. Then take white acrylic paint and cover the entire workpiece with it. After the product dries, use a black marker to draw a contour that will define the boundaries of the penguin's tummy. Now cover the workpiece with black paint, leaving only the part inside the outline and the top unpainted. Use orange paint to draw a triangular nose and hat. Then paint the top of the craft. Make a pom pom out of yarn and attach it to the center of the penguin's hat. Cut out a scarf from a piece of fabric and tie it around the neck of your cute bird.

Such a charming penguin, constantly focusing on itself, will become a bright detail in the interior of your home.

Charming penguin. With our own hands we make a summer cottage

We present to your attention another simple technology for making crafts "penguins from plastic bottles". To create it, you should prepare the following consumables:

How to make a penguin from a plastic bottle, we will tell further. First, paint the container with black acrylic paint on one side - this will be the back of the penguin. Then take the cotton balls and put them in the bottle. Fluffy pieces of cotton wool will be clearly visible through transparent plastic. They will make the bird's abdomen very realistic. Then we will make penguin wings - cut out oval blanks from black cardboard and glue them on the sides of the bottle. Let's make a muzzle - attach toy eyes to the lid of the container, and make a nose out of an orange piece of fabric. From black feathers we will make a "tuft". That's all - a funny and cute plastic bottle craft is ready. Show your imagination and decorate your penguin as you wish. You can glue sequins, beads, buttons, tie a bow or scarf, and make a funny hat out of an ordinary old sock.

We make a large penguin from a 10-liter plastic eggplant: the necessary tools and materials

If you want to decorate your garden, make beautiful crafts from large plastic bottles. Penguins from large containers are very interesting. Such products will decorate the stone or and perfectly fit into any landscape. So, let's look at how to make a penguin from plastic bottles. To make one large bird, you will need two plastic containers, one with a capacity of 10 liters, and the second with 1.5 liters. You also need to prepare a sharp knife, acrylic paints (black, white and red), sand to weight the bottle and a wooden peg for the beak.

Funny plastic garden figure

So, how to make a penguin from a 10 liter plastic bottle: take the prepared container and cut off the neck, but so that the narrowing part remains. Pour some sand into the container (for weighting). To make the head, use a one and a half liter bottle. Cut it in half and insert the part with the neck into the "body" of the bird. Now fasten the parts: make holes in the plastic with an awl or nail heated on fire and thread the wire through them. Make a beak from a pre-sharpened wooden peg. Insert it into the neck of the smaller bottle. After making the frame, you can start painting the penguin. Draw the back and wings with black paint. Make the paws red and decorate the beak. Paint the belly with white acrylic paint. After completing the work, allow the product to dry. That's all, the charming penguin is ready.

You can look for him a place in the garden. You can make babies out of smaller bottles - as a result, you will get a family of cheerful and elegant penguins. Good luck with your creative experiments!