When gems richly and spectacular look, they increase social status owner. To clean and give glitter it is advisable to contact a good jewelry workshop. But if necessary, clean the gem can also be at home.

List of necessary means for cleaning precious stones:

• Sea salt
• Gin
• Baking soda
• Wine vinegar
• Liquid soap

Clean effectively precious stones with salt

Method 1. In a glass or ceramic container, pour warm water. In it dissolve one teaspoon of salt, but necessarily sea. After that, immerse your gemstone and leave it for 12 hours. After half a day passes, it must be rinsed under cold water, and then gently wipe with a soft and clean cloth.

Method 2.. In the deep container, pour salt. Then put your gem into it, and leave for a whole night. After a night, rinse it with water and gently polish with a soft cloth.

Clear effectively precious stones with soda

Method 1. Pour hot water into the container and pour one teaspoon of soda. After that, put this container on the fire and immerse your gemstone into it. Several minutes boil, after which you get the decoration. Then rinse under water and gently polish it.

Method 2.. Mix one tablespoon of food soda with several drops of water. After that, mix until the soft paste begins to form. Then, with the help of a cotton swab, carefully apply a cleaning agent to your decoration. Wipe and wash under water.

Return the shine decoration will help Jin. This tool is not able to clean the gem against contamination. Wipe the stone with a cotton swab or a cloth moistened in the drink.

If you want to carefully remove the contaminants, then use soap solution. Take any liquid soap And pour it into the water, after which dissolve. With the help of an old toothbrush, carefully clean the decoration, the main thing is not forget the brush to moisten in solution. After cleaning, rinse the decoration in the water and polish the dry cloth.

Rings like any jewelryOver time, they lose their appearance, even when you keep all the features of storage and care.

If you return the golden brilliance to the usual ring is not much difficult, then before you clean golden ring With a stone, it is worth considering a lot of nuances.

What you need to know about gold?

Gold is soft enough a precious metalSo when working with it is always worth using soft tissues. Ideal flannel, cotton or even suede. Try not to clean the decoration with abrasive materials or hard powders, the metal can scatter, and additional processing is to get away.

Due to the natural softness of gold, decorations are often made from alloys. It does not mean at all that your gold accessory is poor quality or fake. Alloys with other metals make gold more durable and add an unusual shade. For example, white and red metals appeared precisely thanks to the experiments of melting. As part of white gold, silver or nickel is usually contained, and in red - copper. Therefore, when cleaning ornaments, it is better to avoid aggressive acids.

How to clean the ring with precious stone

Before cleaning the ring, pay attention to how pebbles are attached to decorate. There are several types of fastening stones on the jewelry and one of them glue. In the event that the stone is attached to the glue, only dry cleaning is suitable, the liquid can dissolve the glue.

You can clean the ring entirely with salt, washing powder, ammonia alcohol, soap solution or special means. Other known methods of cleaning are suitable for some decorations, but it is worth being very careful with them.

A few hours in a weak saline solution (1 teaspoon on a glass of salt) will return the jewelry of the golden shine and radiance. It is better to use a seaside salt, but the cook is also suitable. The ring can be cleaned, dropping it into a sidier with a clean sea salt for 8 hours. After interaction with the salt, the ring is washed in cold water and clean soft cloth.

• Well cleanses from pollution warm soap mortar. After several hours of stay in the pollution solution, removed with a soft brush or cloth. This can be cleaned with a ring with ruby, sapphire, amethyst and malachite.
• A solution of simple washing powder is suitable for sapphire, emerald, quartz, diamond and aquamarine. You can replace washing powder, dissolving in 0.5 liters of water 120 g of drinking soda, 30 g of cook salt and 50 g of chlorine lime.
• Clean the ruby, alexandrite or sapphire can be soapy water with ammonia alcohol. For the preparation of the solution, 0.5 glasses of warm soap water, 1 teaspoon of alcohol.

Most dust accumulates in those places where the sample is delivered, or in places of attachment. To make your decoration shine as new, pebbles require special care. Learn which indicator the stone has on the Moos scale. This will allow you to avoid chips and scratches. Minerals that have an indicator more than 5 - sapphire, diamond, ruby, aquamarine, quartz, ordinary beryl, topaz, agate - you can safely clean the brush, while soft pebbles are better polished with a cloth or wipes.

Often contamination accumulate under stone. It is quite fixable if you apply a solution of glycerol or magnesia on a mash or brush and clean the stone in hard-to-reach places.

Every stone has its own individual characteristicsTherefore, not all decorations can be cleaned in traditional ways.

• Ring with turquoise or opal can not wet. Due to the porous structure, the stone can lose its color or paint. Therefore, it is worth storing jewelry separately, away from coloring substances, shoot before contact with liquids. Clean such jewelry can be cleaned with a dry cloth, and very strong contaminants remove moistened in summer alcohol Vatka.
• Pearls also requires accurate circulation. It can be washed in cold clean water, but you can not heal, clean salt or ice. Vinegar and very acidic medium are detachious for pearls, but the neat cleaning of potato starch is effective.
• Chrysolite, like turquoise, is sensitive to soap and an acidic environment. If it is incorrect to clean the stone, it can be covered with ugly soap divorces. It is permissible to rinse decorations with chrysolite in clean water.
• Many minerals are afraid of sharp temperature differences. When heated, they can change their properties, shape, and some crack themselves. So the temperature difference is contraindicated: sapphire, aquamarine, chrysolitis, rubbing, toopaz and grenade. You can use the method of heating in soap solution with diamonds.
• Popular ultrasound cleaning is not recommended for decorations with stones, It can weaken fastenings and damage the mineral itself.

If you doubt that it is possible to clean the ring yourself, you can contact the jewelry workshop for a consultation or order cleaning the ring.

Gold is rightfully considered a noble metal. But despite this, gold products need to be washed and clean. One-piece chains and bracelets easily return the original appearance. But how to clean the gold earrings with a stone, for example? Let's find out how to care for such decorations.

Fundamental rules

Clean gold inlaid by stones, difficult task. You need to be extremely careful, the wrong processing method can spoil the jewel.

1. Do not use sharp toolsnot to scratch precious stones.
2. Do not lower the accessory into the waterIf the stones in gold products are kept with the help of glue - they simply can disappear.
3. With flannel fabric flange You can remove dust and dirt without additional manipulations.

• Clean the jewels regularly. Regardless of the frequency of socks, gold jewelry with inlays must be cleaned once a month.
• Contact jewelry workshop. If gold with stones is very expensive, and you are afraid to handle it with your own hands, better treat it to the jeweler. The price of such a service is quite accessible, and the risk to spoil the products is minimal.

Cleaning methods

To understand how to clean this or that product, you can only find out the origin of inlays. Some inserts are completely not subject to home processing. These include:

• amber,
• berylla
• pearl,
• coral,
• lapis lazuli,
• ivory,
• turtle shell.

All decorations with stones can be divided into three types. I will tell about leaving each of them.

View 1. Precious Inlair

What and how can I bring gold with precious stones at home? The main recommendations are presented in Table:

Picture	Type of insert
	Recipe 1. Sapphire / Brilliant Such products can be cleaned: Ammonia alcohol; Rinse in soap solution. Flannel. Sapphire is forbidden to heat.
	Recipe 2. Pomegranate / Amethyst Allowed: Clean ultrasound. Handle with a soft toothbrush. Wash in a soap solution. Pomegranate and amethyst can not expose to sharp difference in temperature.
	Recipe 3. Chrysolit / Aquamarine. You can rinse with: Detergent solution. Summary of ammonic alcohol.
	Recipe 4. Ruby / Topaz / Emerald. Permitted: Use warm steam. Wipe with a cotton waller dipped in gasoline. Process with soap solution. These are very fragile stones, so they cannot be subjected to strong shocks and clean ultrasound.
	Recipe 5. Turquoise / Opal At home, such a product can be wiped with flannel or velvet. In case of severe pollution, it is better to contact the jeweler.
	Recipe 6. Tourmalin Take the liquid soap and prepare a weak solution: 1 tbsp. l. Funds per 100 ml of warm water. Wipe the decoration with the resulting liquid.

View 2. Semi-precious inlay

Many products are decorated with inserts from semi-precious stones. Zircon is considered the most popular. It is red (hyacinth), blue (stilit) and yellow (jargon).

InstructionHow to return the brilliance and transparency of Zircon:

Picture	Recommendations
	Step 1 Ship the container with foil and pour into it a weak soap solution. Lower the product with a zircon for 15 minutes.
	Step 2. Wipe the stones with a pure soft toothbrush. Remove the dirt in the places of fasteners and fasteners with a cotton sticks moistened in the ammonia.
	Step 3. Wipe the mineral and gold with a napkin for optics or flannel flannel.

Useful tips.

How and the better to clean the natural stone.

We must clean: The facade lined with sandstone, pebbles and boulders in a pond, powerful sidewalk courtyard.

Durability - distinctive trait Natural stone. Natural stone, like any other material, under the action of the environment, change their appearance over the years. The stone is dumping, covered with dust, particles of the earth, overgrown with moss. In places where constant dampness, mold may appear on the stones. Natural stone over the years acquires a more expensive and noble view, but we will look at the option when a stone cleaning is needed.

Cleaning natural stone with water

This is the most gentle and practical method. Hot water effectively removes organic pollution. Water rigidity for natural stone does not matter, rigid water natural stone does not harm.

Failure: Not all kinds of contaminants can be removed from the surface of the stone with hot water.

cleaning stone acid

In this case, products with pH<7. Соляная кислота, фосфорная кислота, фтористоводородная кислота, органические кислоты (лимонная, муравьиная и уксусная) или кислотно-реагирующая соль, как NH4HF2.

They easily cope with inorganic pollution. Remove from natural stone The remains of the cement mortar, formed lime, and if necessary rust.

For example, lined 3 years ago, the wall of gray-green sandstone with a red ridge can be treated with acetic acid. Thus, wash off the whole redhead with a stone. This will allow you to wash the stone and change the color of the wall.

For cleaning the surface of the natural stone, the stone diluted with a diluted acid is moisturily and abundantly. Then washed off the treated surface with clean water.

When using hydrochloric acid, with time, iron chloride forms rust falls (red-haired colors on the stone). This method is desirable to entrust the specialist who is familiar with the reactions of certain acids with various types of natural stone. If there is no specialist, you can spend trial (test) actions, in small areas, be sure to observe all precautions.

Failure: It should be known that it is possible to damage the surface of the stone. Acid removes the crust of pollution, penetrating and rushing the boundary layer between the stone and dirt. Perhaps partial destruction of the surface layer of stone. Another aspect, as a result of the reaction of acids and alkalis, the salt appears, remove which is extremely difficult. If in the natural stone contains iron elements, then yellow-brown divorces may appear on the stone.

But should not actively apply such funds when cleaning marble and limestone! The stone is damaged.

natural stone cleaning alkali

Alkaline compounds with pH\u003e 7. They effectively eliminate organic pollution (oil spots, traces of fat, wax films, etc.). Use a potassium solution, alkali drinking soda.

Use method: abundant pre-moisturizing, then processing diluted alkali (1:10 - 1:30). Flush the treated surface with water or neutralizing composition (diluted acid).

Alkaline means are harmless to acid-sensitive stones, for example, limestone.

Failure: Alkaline agents are ineffective with cement contamination, when removing rust and limestone tax.

cleaning stone solvent

Pollution on natural stone from synthetic fats, resins, mineral oils, glue, paints and wax are eliminated by solvent.

Disadvantage: Fully cleaned pollution fails, residual traces remain after chemical processing. Not suitable for eliminating cement spots, lime and traces of rust.

The unique properties of stones are checked for years. They help to establish the physical stateThey attract good luck, make people happy, promote in creating prosperous families, where peace constantly reigns, comfort, virtue and hears joyful laughter of cute chad. In general, stones are constantly "working," without sorry forces, but especially positive energy. It is the last factor and is the cause of all positive results that a person feels when wearing a mascot or amulet with him. But, like any other force, positive energy can leave the mineral over time. And in order to restore his unique abilities, you need to take care of your facing, cleaning it from negative energy.

It should be borne in mind that you can never feel the original purity of the stone, whose owner you have become. If he was inherited, then passed through the hands of many generations. If you independently acquired a jewelry in the store, extraneous people took part in its creation, and the mineral became the owner of someone else's information, and not always positive. Natural cleanliness can boast only the found gem. But such cases are single.

Most often, energy accumulation facilities are noble stones. Full cleaning should be the minerals that are supposed to be used for therapeutic purposes. This is especially true of crystals that came to a new owner from the dead relatives or acquaintances. Onyx is considered the most dangerous uncleaned stone. As for the citrine, it is enough for him to have the right and permanent care or simply with regularly subject to conventional cleaning.

Knocks can be treated differently. They can be loved and hate, sometimes cold attitude is found. But it is necessary to remember one capital truth. If you want to have a permanent protection, assistant, the counselor, then with the stone you need to find not only a common language, but also to gain internal harmony. There are several rules that need to follow:

1. Do not think that the mineral the next day after the appearance you will begin to work wonders. In order for you to catch his help, you need to get used to each other, complete mutual understanding. This is achieved after a certain period of time.
2. To obtain a positive effect in the future, it is necessary to clean the newly purchased stone. Why purify? Because during its existence on Earth, minerals absorb all the energy that is in close proximity to them. It may be the energy of the Sun, the Moon, the most planet, people who have in contact with gems and so on. To get rid of the energy and information trace, it is necessary to clean them.
3. As soon as cleaning is finished, the stone needs to provide peace for a couple of weeks. During this time, he rests and gains strength. The next stage is its charging. Methods can be different: the light of the moon or the sun, herbs, salt, and so on.
4. It is necessary to respect and love your talisman. This positively affects its quality. For all gems, you need to follow, care, carry out permanent cleaning, the regularity of which depends on how you use your own behavior. It may be a simple wearing jewelry, carrying out with its participation of therapeutic procedures or magical rituals.
5. In situations, when the stone is pale, heavy, loses its shine and beauty, decorations with him need to remove and leave for a couple of days in a separate case, away from prying eyes.
6. If you do not want to lose respect for your guard, then try never to give it to anyone, even for a while. This is fraught negative consequences After return. The most harmless one - the stone will stop helping you in life. But there are cases when the stone "offended" and begins to take revenge to his owner. This can lead to the development of chronic diseases, the emergence of fatigue, constant poor mood, apathy. Good luck is turned away from him, and problems begin at work.
7. Cleaning and charging the mineral should be carried out on their own, with a good mood and with light thoughts.

What you should pay attention to? For possible changes in the stone. He can change the shade, become dim, "non-living", heavy and finding next to him leads to irritability, nervousness, hot tempering, recklessness. This suggests that your talisman is very tired and he just needs to be cleaned from the accumulated negative. Give it the opportunity to relax and restore lost forces to maintain you in the future and withdraw from deadlock situations.

Basic Cleaning Rules

There are many ways to remove all "dirt" with stones. But not every method is applicable to a certain category of minerals. For example, straight sun rays. An amazing way to clean gems. But you need to own information, in what cases should not do this. For example, the bright sun is afraid of amethyst, turquoise and pink quartz. Instead of liberation from negative, they quickly lose their beauty, become faded and lifeless.

But there are other methods, such as grass or other natural representatives, which are used for any natural minerals. But with sea salt and freezing, you have to be careful. Salt can have a negative impact on polishing faces, and an excessively low temperature lead to the formation of cracks and chips. They are afraid of these methods of turquoise, malachite, pyrite, opal, carnelian, amber, onyx, lags and other representatives of the world of stones.

Time to clean gems

No need to build a schedule for cleaning your stones. This is nothing. Minerals themselves will give you to know when time has come to bring them in order. The frequency of talisman drives in proper condition depends on how often you wear it, what is your mood, are there problems with health, whether the situation is favorable at work, do you have a lot of envious and ill-wishers, what purposes you want to achieve and how many obstacles do you want It is necessary to overcome to achieve a positive result. In general, it all depends on the quantity and complexity of work.

Change in appearance And the behavior of its overama can be understood by the following signs:

• the acquisition of dim or dark color changes; transparency;
• the Aura is modified and a peculiar haze with an unpleasant shade appears around the mineral;
• solitude, stickiness appears, heaviness;
• there is a desire to wear decorations with this stone, he oppresses and pushes his presence;
• taking him into hand, a sense of dissatisfaction appears, aggressiveness, the mood is spoiled, apathy arises;
• as soon as you wear jewelry, a head begins to circling, the forces leave, the pressure drops sharply;
• in the process of wearing products, inconvenience arises, discomfort and constantly want to get rid of this beauty.

If you never part with your jewels, you should clean them from negative every seven days, and maybe even more often. This is related to stones, which, like a sponge, absorb any energy, and such plenty. It should be borne in mind that the closer the stones are located to the human body, the faster everyone "dirt" is settled. This also applies to those gems that were used for therapeutic purposes and in the chakral balancing.

There is a basic rule that must be observed with any cleaning of minerals, regardless of what method you have chosen: Candle, salt, herbs, moon, sun and another. The cleaning time should have to have the remaining three days of the lunar month, immediately before the new moon. It is the full moon that serves as a source of strong energy, which restores the energy of the gem.

Methods of cleaning Talismans

Everyone chooses the method of cleaning his guard. And there is nothing to invent here. As a rule, cleaning technique passes from generation to generation along with the inheritance of amulets. You can, of course, experiment. It depends on the person and its inner belief. But whatever way you have chosen, the main task should be achieved - restoring the lost properties of the stone for its further use.

We use moonlight

With a strong pollution of the stone before exposing it to the lunar light, it is necessary to take a vessel, fill it with clean water, put in it salt and lower the gem there. This vessel put on the windowsill and hold, at least three days at a decreasing moon. Leaving, the moon will take with him all the negative accumulated in stone.

There are stones that need to be cleaned exclusively by the lunar light. Other ways will not be effective. These include , .

Cleaning solar rays

This is an excellent way to help precious stones to cleanse. Very fond of sunny baths crystals with red, yellow, pink, orange tint. How to clean this way? Enough for 2-3 hours to place stones under the outdoor sun rays. It is best to choose an open space: a barroom, forest glade. But the windowsill is suitable. The only condition is the presence of good weather and the bright sun throughout this period.

If the minerals were used to combat severe illness, visited the hands of the villains, or inherited from the deceased relative, then it is worth a deep cleaning. For this, gems are taken out to open space and are left there for a week, or days by 10. The presence of sunlight must, otherwise it will not be possible to achieve a positive result.

A good place to accommodate crystals are branches of trees and shrubs or places in close proximity to their root system. Before you direct minerals on sunny baths, it is necessary to rinse them thoroughly under warm running water, and after rinsed cold. Some stones are enough and a three-hour procedure, even with a closed window. With cloudy weather, cleansing may not work.

Amethyst, Aquamarine, Apophillite, Amethrin, Turquoise, Pink Quartz, Smoky Quartz, Praisyolit, Opal, Kuncit, Tsitrine, Fluoraitis, Topaz, Topaz, Topaz, Topaz. But there are those who are contraindicated to the sun. This can lead to a change in their color and the destruction of the structure.

The maximum foundation of stones under the sunshine is such:

• - 5 minutes;
• - quarter of an hour;
• - quarter of an hour;
• - 5 minutes;
• - 7 minutes;
• - 65 minutes;
• - 8 minutes;
• - quarter of an hour;
• - 30 minutes.

What determines the purity of the stones? The adequacy of the procedure can be understood:

• on the appearance of smoothness and silkiness of the surface of the stone;
• he becomes pleasant in his hands;
• feels freshness and coolness;
• the color is bright and rich;
• even in the absence of the transparency of the mineral, the inner glow of pure aura can be seen;
• if the stone takes into the hands, then the mood rises, the well-being is improved, there are minds of adversity and experiences, forces and positive emotions are added;
• when wearing the mineral, a sense of complete comfort appears;
• itifies power and power.

We clean water

Another unique way how to save a stone from the negative is the usual water. It is considered a means of purification of both the physical component of the mineral and the energy. Moreover, you can use both flow water and water baths. But best suits the hidden water or recruited in pure source. Experts in this area agreed that the most effective water will be a river, marine or from any other natural sources. It is considered alive, since it is constantly in motion. Such water is able not only to clearly clean the minerals from the negative, but also recharge their active energy.

If there is an opportunity, it is worth omitting the mineral in the stream or the river on the clock. It is the water stream that blends all negative information. But if there is no such possibility, then you should resort to a passive or active method of cleaning. The passive method is as follows: take a small container, put a stone into it and put under the flow water for 10 minutes. With an active method, minerals need to keep all the time in their hands while the driver is flowing on them. At the same time, you look at them, come into contact with them, which positively affects their cleaning. You can even feel how all the dirt is washed off, the aura becomes clean, strength and energy are restored. But this procedure is longer, and can take 5 - 7 minutes.

The main rule: in any case, the minerals after the shower do not wipe. They must dry themselves. For greater use, you should freeze the candle and put gems next to it. This will strengthen the effectiveness of actions.

There are certain restrictions in this procedure, since not all stones can be water purified. It is necessary to take into account their properties and characteristics. So, if minerals are able to dissolve in water or when interacting with it lose their qualities, then it is necessary to refuse from such a venture. As for citrine, he prefers to wash only under cold water. Rhodotroinders the water does not like, so it is worthwhile to wash it no more than a couple of times for 10 days and with special accuracy so as not to damage the polishing.

It is necessary to abandon the purification of water dioptase, fluorite, pearl, malachite, lazurite, chrysocolla, sodalit. They may soon begin to collapse and become dull. When interacting with water, selenites can disappear in front of the eyes. It is strictly forbidden to use stones with water after they have been under direct sunlights for a long time. This will lead to their dulling, split, cracks.

Find another method of cleansing is also for Galita, Astrophillite, Heylandite, Selenite, Musovite, Kyanita, Gypsum, Serafinit, Uvarith, Stylbit, Chermygitis, Cellita, Chrysocolla, Fuvyde Slane. Water negatively affects them. physical properties, completely dissolving them. Therefore, you need to choose salt, sun, moon, herbs and other cleaning tools for them.

Refuse sea water It is worth the Apophyllite, Aquamarine, Turquoise, Berman, Kahlong, Calcite, Labrador, Hematite, Opala, Onyx, Rhodokrosite, Rhodonite, Pyrita, Alert, Amber, Cherdelik, Evdalitis. The presence of salts in water can be negatively affected by their physical properties.

For cleaning, we use other crystals

But not all stones are suitable for these purposes. To apply such a method, you must have:

• amethyst brush;
• selenite wand;
• crystalline carnelian;

This method is quite simple. Contaminated stones must be put near the windowsill or one box with "cleaners" and leave for a couple of hours. But minerals that are used to clean, in turn, should be perfectly clean. Otherwise it will not be possible to achieve a positive result.

Brown Rice or Sea Salt

These are also effective methods, and the use of brown rice is preferable, since it does not harm the surface of minerals, unlike sea salt. The cleaning method is quite simple. It is necessary to take a small container, pour the sea salt or brown rice and "bury" in them the mineral, leaving for 3 days. As soon as cleaning is finished, the stones are washed under running water and leave to dry naturally. It must be remembered that the reuse of salt and rice must be excluded. After cleansing actions, all this is thrown out.

Sound Cleaning

Tibetan or crystal singing bowls participate in this cleaning. It is the sounds of such subjects that are forced to restore the vibration of stones to the initial state. These adaptations are able to free the gems from someone else's negative energy and help tune in to a positive way. In addition to singing bowls, you can use Tibetan drums or cymbals, bells, tunes. If only stones were influenced by a pleasant, soothing and cleansing sound.

Session Rake

This way will make it possible to recharge the crystals, clean them and provide additional energy. For this, no devices are needed. Need to have good mood, Positive emotional attitude and desire to clean your minerals from negative.

We take gems in the palm, we mentally wish them to cleanse and recover, we guide all your positive on them and blow on them three times, deeply breathing and exhausted. This healing respiratory has favorably affects crystals and helps restore its energy to the original state. The underlying condition is the absence of unauthorized people.

Fumigation

For this method will need herbs that are ignited. Basically give preference to sage, lavender, cedar, sweet grass, tinnitter, wormwood. They are all or what you have are dried, mixed and fed to form smoke. In no case cannot be used a lighter, only matches. For the formation of a light smoke curtain, you can apply a small sheet of cardboard, which are foaming glowing herbs.

After taking a stone in the palm and keep directly under the jet of smoke. The duration of the procedure depends on how much the stone managed to pollute. It may be a couple of minutes, but can reach the half an hour. In this way, you can clean not only stones, then yourself, as well as the room in which you live.

Elixir

It can be purchased or done by itself. For this, a carnelian is needed, which is placed in crystal clear water and is left for 15 days. The finished elixir is best pouring into a bottle with a sprayer and handle all dirty stones. The main thing is to remember that such a procedure cannot be exposed to those stones that are afraid of water.

Petals flower

You need to gain a whole pile of the petals of those colors that you like or that bloom at this time of year. Gem lowered in the Pile and leaves for several hours. The main thing is that the flowers grow in a clean field or in unpolluted terrain and before you broke them, there were full of vitality.

Land

For this, the flower pot in the house and the country's land plot is suitable. Place the crystal there and leave for 15 minutes. After rinse it under running warm water and leave to dry on the windowsill, pre-inspired a soft cloth. The Earth will absorb the entire negative, leaving only positive properties.

But carefully examine the characteristics of the stones before applying such a method. The main thing is that after carrying out such purification, the minerals remained safely and maintained, with intact coating and a bright shade.

Charging stones

After the minerals were cleared, they must be charged. This uses moonlight or sun rays. Your assistants should relax a little and restore the power for future work. The crystals are left on the windowsill or in the garden, on the forest clearing or on the shore of the river for a short time. The main thing is that there is silence, the absence of foreign human eyes and good sunny weather during the day or bright moonlight at night.

Do not immediately use the purified and charged stone. Give him a couple of days peace. And then wear as an overlap or talisman. And you immediately feel the tide of strength and energy in it, your business will be applied, the health will be normal, the mood will improve.