For the perfect wedding, every little detail needs to be thought through. It happens that a small deviation from the script can affect the mood of the newlyweds. To create a holistic image, bridesmaids should also take care of their outfits. Ideally, they should complement the image of the hero of the occasion.

An unusual accessory for this occasion is the bridesmaids wedding bracelet. It does not restrict movement and looks very impressive.

How to choose the right wedding bracelet

In wedding salons you can find a wide range of these accessories. There are products with rhinestones, flowers and ribbons. It is best to choose a bracelet for bridesmaids under the dress.

The same outfits look good with the same type of accessories. For slender, flower bracelets for bridesmaids are suitable, for girls with shapes it is better to use products of impressive size. They are easy to make yourself.

Where to get bracelets

These accessories are sold in specialized stores, they can also be made by hand. Each option has its own advantages and disadvantages.

Purchased products always look professional and stylish. You can choose the same organic bracelets for the bridesmaids. Their disadvantage is that they are made in advance. By the end of the festive event, they may lose their elegant look.

The way out of the situation is to make them with your own hands. You can make a bracelet for the bridesmaids just before the solemn day. This accessory will last longer.

If there is no desire to make flower arrangements, you can easily replace them with ribbon bracelets. You can add rhinestones and colored beads to them. Products can be completely different in color, but the same style.

Making a ribbon bracelet

DIY bracelets for bridesmaids are not so difficult to make. It is important that they fit the overall style of the wedding. Therefore, it is necessary to choose ribbons according to the color and texture of the dress. Cuts must be made with stocks under the bow. You will also need a thread, a needle and beads. Ribbon bridesmaid bracelets come in many variations.

On the needle you need to string the tape, leaving folds. It should be the perfect harmonica. After some distance, you need to add beads, and at the end tie a beautiful bow.

There may be more beads on the bracelet. Then they need to be strung on a tape. Alternatively, you can tie a knot after each element, this will give a special charm.

You can use translucent beads or vice versa, pearl type. All this - the taste and color. The main thing is that the products are the same.

Another option is DIY flower bracelets for bridesmaids. Their production is just as simple and does not take much time.

How to make a flower bracelet

The most optimal solution is to choose a ready-made bracelet that will be combined with a flower arrangement. This may be a chain or necklace of suitable length.

After you need to prepare a flower arrangement. Cut off the stems of the flowers and glue them together with glue. You can add beautiful leaves and additional petals.

At the final stage, the resulting composition must be glued to the chain.

The bracelet can be made from artificial materials. To do this, you will need: aluminum wire, ribbon, cardboard circles, spray roses, decorative ragwort branches, artificial flowers and glue.

Place ragwort branches and additional foliage on a cardboard circle. All this is fixed with glue. Fill the free space with spray roses and flowers.

The aluminum wire is folded in half and wrapped in a satin ribbon. Thus, a kind of bezel is obtained. In the middle, you need to attach the resulting composition.

It is important that the bracelet for the bridesmaids is reliable, you need to put a cardboard circle under the bouquet. Extra parts are cut off. At this stage, everything is ready.

Making bracelets does not take much time. These charming products can become the main highlight in the outfit of girlfriends and give a solemn mood.

Every girl invited to a wedding wants to look bright and beautiful, but first of all it concerns the witnesses, or, in other words, the bridesmaids. Girls play an important role in the celebration, because they accompany the bride everywhere and help her on this important day: they set the tone for the event, actively and simply decorate this unforgettable holiday! Flower bracelets for bridesmaids (as in the photo below) perfectly complement and unite the festive images of beautiful nymphs.

If there are several witnesses, then they can shine at the wedding - this tradition came to us from the West. But the presence of identical outfits is not mandatory, however, it is desirable that some common features in the appearance of girlfriends indicate their status. One of the options to distinguish girlfriends from other guests can be the same or the same type of jewelry made of flowers or satin ribbons on the wrist. If the girlfriend is alone, the bracelet will serve her as an original addition to the image.

General principles for choosing a floral bracelet

The bracelet should match the look of the bridesmaid. The tone of the flower should match the color of her dress and other accessories. This wrist decoration will go well together. For the image, it is better to choose a classic dress made of light fabric (silk, chiffon) and natural makeup.

A bracelet Fresh flowers for bridesmaids, like all other details of the image, should be combined with the appearance of the hero of the occasion herself, as well as with the format of the wedding. The color scheme of the bracelet should match the color scheme of the bride's bouquet.

wedding planner

The bridesmaid's bracelet can be a small copy, but this is not necessary. Just enough to match the bouquet.

Elena Sokolova

Stylist

Bridesmaids in headbands with flowers will also look interesting. They will give the girls extra charm and innocence.

Nadezhda Izotova

How to make

It's easy to make this beauty. To simplify the task and save time, you can use ready-made flowers for the bridesmaids as a basis - you can buy them in a needlework store.

Decoration can also be made from wire (having decorated it well), from a string of beads, as well as from satin ribbons, velvet decorative elastic bands and other improvised materials, while showing creative imagination and skill. Fortunately, in specialized stores you can find many different devices that will work as a base.

Satin, satin, lace and other similar fabrics will fit for decoration, depending on the taste and wishes of the bridesmaid and the hero of the occasion herself.

The main detail of the bracelet are, of course, flowers. You can make them yourself using instructions from the Internet, or you can attach purchased artificial as well as live buds to the base of the bracelet.

They look the most romantic, but it is important to carefully choose the variety so that the “ray of light and joy” in the bracelet does not wither and does not lose any form even before the end of the wedding celebration, which can extremely upset the groom, bride, her girlfriends and other guests.

A good option is polymer clay flowers. They look like the real thing, but you don't have to worry about their freshness and condition. Hand decoration with a polymer clay flower will serve as a good souvenir and a memory of the wedding.

In its most general form, the scheme for making an unusual jewelry looks like this: you need to take the base and decorate it well with the chosen material, and then attach the main element of the bracelet (flower or composition), after which it is good to fasten the component to the base. You can also make cute flowers from satin ribbons for bridesmaids.

What tones to use

The choice of color depends on what dress the bridesmaid will be in, the solemn part, as well. Classic flowers in the hands of bridesmaids should be in white or any pastel colors, but in some cases bright colors will be appropriate: red, blue, green, etc. In any case, the choice of color should be agreed with the main character of the celebration.

To make an unusual hand jewelry for the bridesmaids, you will need:

• artificial flowers;
• satin ribbon 1.2 cm wide;
• nylon tape 1.7 cm wide;
• glue gun;
• scissors;
• a piece of felt;
• wire cutters;
• lighter.

There are many video tutorials on how to make bracelets for bridesmaids. One of them is below.

So, to make bracelets for bridesmaids from artificial flowers:

1. Cut 39 cm of each ribbon (nylon and satin).
2. Finish the edges of the ribbon with a lighter.
3. Fold the satin ribbon in half and find the middle. Spread the middle of the tape on the wrong side with glue and fix it with a nylon tape.
4. Cut a small piece of felt the width of the satin ribbon and glue it to the middle of the satin ribbon on the other side.
5. Decide which flowers you want to use for the bracelet. Cut off the heads, small inflorescences and three leaves with wire cutters.
6. Lightly cut the selected buds into a semi-circle shape.
7. Glue the sheets and then the flowers to the blank. Pressing tightly against the workpiece, they must be glued one after the other as quickly as possible until the glue has dried so that it grabs well.
8. Fix inflorescences in the composition. Then let the glue dry. The bracelet is ready!

Now you know how to make a flower in the hands of the bridesmaids with your own hands.

Option with fabric accessory

Another interesting type of jewelry is bridesmaid bracelets with fabric flowers, as in the photo on the left. Moreover, the buds can be bought ready-made or made by hand. It does not take much time!

To make a rose from fabric, you need to take a template (a circle of small diameter), cut it out of paper, transfer it to fabric and cut out 10 layers according to the template. You can take one type of fabric, for example, white, or different colors for alternation. To cut circles faster, fold the material several times, fasten it with a pin and cut out several pieces at once.

Each circle, cut out of fabric, easily turns into a petal. To do this, the circle is folded twice to make a quarter of the circle, and a few stitches are made with a thread closer to the corner of the workpiece.

Next, the paper template is taken as the basis, and the petals are glued onto it so that each next layer slightly extends beyond the edges of the previous one. The resulting flower is glued to the tape. The length of the ribbon should be long enough to tie flowers on the bridesmaids' wrists.

Interesting! Most often, three flowers are used to decorate bracelets, but you can make one large one.

Bracelets from living plants

So:

• To make such a bracelet, you first need to select and prepare flowers. Their stems should be cut as short as possible, and the bud should be pierced with a thin wire. If there are several flowers, you need to make a beautiful composition out of them, fasten with wire and wrap with tempo tape.
• In a fairly wide satin ribbon, you need to make a hole and put the buds there, and then fix it with glue.
• When the glue dries, you need to close the remaining hole with a piece of tape so that the flowers are firmly fixed. After that, you need to tie the ribbon on your hand with a beautiful bow.
• In order to make a flower bracelet for the bridesmaids, you can use additional elements, such as leaves, small twigs, and berries. They need to be shortened, attached to the main flower with wire or a special floral tape, and the base of the bouquet should be wrapped with a lace or satin ribbon, which will serve as the base of the bracelet.
• If the flower arrangement turned out to be large enough and it cannot be threaded through the hole in the satin ribbon of the bracelet, you can simply glue the resulting miniature bouquet to the bracelet.

Idea with roses

If the bridesmaid wants to create a bright, memorable image, you can make a bracelet with fresh roses. To do this, you need a rose spray (a branch with many small pink inflorescences), as well as a plant called ashen cross - in flower shops and among florists it is also known as "Dusty miller", it is a beautiful branch with a small silvery fluff.

1. First you need to glue a branch of the “Dusty Miller” to a small circle of cardboard. Then pink buds are glued (daisies, tulips, lilies, gerberas and others can be used instead, but roses look the most impressive). After the cross and roses are attached, the cardboard should not be visible.
2. Then you need to take the fishing line and measure your wrist, then cut off the fishing line twice as much to wrap the bracelet around your wrist twice. Glue the edges of the bracelet with glue, take a satin ribbon and carefully wrap the bracelet with ribbon along the entire length.
3. Find the middle of the bracelet, apply a little glue there and glue a cardboard circle with roses on the top of the bracelet, and attach the same cardboard circle on the bottom. Glue the two circles together so that the bracelet is between them.
4. Bend the product on your hand and admire the results of your efforts.

Summary

As you can see from the instructions for making DIY wrist jewelry, making such a flower bracelet is quite easy: it takes only a small amount of time, some materials, patience, skill and accuracy. Worth a try to see how easy it is! At the same time, the result of the efforts of the bridesmaid can distinguish her from the crowd of guests, become an unusual souvenir and keep the memory of the wedding for many years to come.

Content

When working on bridesmaids bracelets, you need to consider the style and color scheme of the wedding itself. It is important that the bracelets are in harmony with the outfits of the bridesmaids and bridesmaids. As a basis for bracelets, ready-made metal bracelets, satin ribbons, beautiful elastic bands and much more are often used. You can decorate the base with flowers, beads, beads and other elements.

Lacy

Lace bracelets look very gentle and elegant.

For work you will need:

1. Satin ribbon (25mm wide);
2. White lace;
3. Brooch;
4. Elastic band (15 mm wide);
5. Half beads on a string;
6. Flowers;
7. Thermal gun;
8. Scissors;
9. Needle with thread;
10. Pins.

Manufacturing instructions

First we need to cut off the same pieces of lace and satin ribbons, approximately 30 cm each.

Now we pin one ribbon on the back of the lace (you can baste with a needle and thread). We fold our design in half face inward, cut off the edges with a pin.

Then the edge is securely stitched on a sewing machine.

Now we take the second piece of white satin ribbon, put it on top of the first one, tacking with pins or threads. We bend the ends of the second ribbon a little inward, fasten it with pins.

We sew two ribbons and lace with machine seams laid on both sides of the ribbon. The ends are left unstitched.

The base is ready, now we start making the decor. We make a bow from a satin ribbon, fasten it with a thread. Sew a brooch in the center of the bow.

We prepare decorative elements for use: half-beads, flowers. We cut off 18 cm of thread with half beads, fold it into a figure eight, fasten it in the center with white threads.

We sew a bow with a beautiful brooch to the front side of the lace base, approximately in the center of the segment. We attach the stitches only to the lace, without piercing the double layer of satin ribbon under the bottom. Glue a figure eight of half beads next to the bow. We attach a large flower on top of the figure eight, glue small flowers side by side, forming a beautiful composition.

In order for the bracelet to sit securely on the wrist, it is necessary to pass an ordinary elastic band between two layers of ribbons. We measure the elastic band with a length equal to the girth of the bridesmaid's wrist. We prick one edge of the elastic band onto a pin, thread the pin into the open joint between the ribbons, draw it around the entire circumference of the bracelet. We securely sew the free edges of the elastic band with white thread.

We distribute the elastic throughout the bracelet, sew up the slot where the elastic was threaded with a hidden seam.

Lace bracelet is ready!

From satin ribbons

Such a bracelet will become a beautiful decoration for the bridesmaids and will remain with them for a long memory of a wonderful event.

For work you will need:

1. Satin fabric for flowers (pastel colors);
2. Round pattern;
3. Paper;
4. Simple pencil;
5. 50 cm satin ribbon (2-2.5 cm wide);
6. Hot glue;
7. Lighter;
8. Various accessories for decoration (buttons, rhinestones, brooches);
9. Scissors;
10. Needle with thread.

Manufacturing instructions

We begin work with the manufacture of flowers from satin. To do this, draw a circle with a diameter of 7 cm on a piece of paper. In our case, a babin with adhesive tape served as a template. Cut out the paper template with scissors.

We apply the resulting blank to the satin fabric, circle the circles with a pencil, which we then cut out. If you use circles of different diameters, you will get more lush flowers for a peony-type bracelet.

We make cuts on fabric circles with scissors, as shown in the photo.

We singe each circle along the contour with a lighter. This will protect the fabric from fraying, give the petals a rounded shape and uneven edges.

We glue several blanks together one on one, placing the petals in a checkerboard pattern.

Glue the finished flowers to the tape with hot glue. We also singe the ends of the tape over an open fire so that the braid does not unravel. In the center of each flower we attach a decorative button, rhinestones or a brooch.

On this bracelet of satin flowers is ready.

with glamelia

Such a bracelet with a large foamiran glamelia is perfect for a bridesmaid, for a graduate, or to decorate a woman's hand at another festive event.

For work you will need:

1. Foamiran of three primary colors (coral, white and burgundy);
2. Hemispherical frame made of foam, newspapers, wire or other material;
3. Acrylic oil paints;
4. Fast fix adhesive;
5. Mother-of-pearl beads;
6. White teip tape.

Manufacturing instructions

According to the paper template, cut out the petals of white, coral and burgundy. We apply each petal to a heated iron. When the workpiece begins to deform, we shift it onto the mold with a leaf and press it well, stretching the petal to the edges and top. We perform this operation with each workpiece.

Using a sponge and oil paint, we tint the burgundy petals, giving them a deeper color. If the material you have is sufficiently saturated color, then this step can be skipped. We leave the tinted blanks to dry for several days.

If there is no foam hemisphere, which is used as the basis for glamelia, then it can be woven from newspaper tubes. To do this, we cross 3 newspaper tubes and braid them with two connecting ones.

We start one tube from above, the other from below. To make the base even and neat, you can braid some round object.

We weave 8 rows and, tucking all the ends of the tubes, we glue them with PVA.

While the base is drying, prepare the center for the flower. We wrap a beaded wire 7 cm long with white type tape. We attach beads to the tape with quick-fix glue. The stamens are ready.

Glue three white petals around the three stamens. We overlap the petals, overlapping the seams.

We attach the flower to a newspaper frame.

The next row is also formed from three petals, placing them in a checkerboard pattern.

After another two white rows, we begin to make coral. We also fasten them in a checkerboard pattern so that the flower turns out to be truly magnificent.

Now we pass two satin ribbons through the newspaper frame on each side to attach the bracelet to the hand.

Last we attach a row of burgundy and a row of coral petals.

On the wrong side we glue small white petals processed on an iron, and a circle of white foamiran with a diameter of 6 cm. So the wrong side will look much prettier and neater.

Post Views: 44

Nowadays, weddings are increasingly held in European style. One of the most important guests at such a wedding are the bridesmaids.

Sometimes the wedding is held in a certain style, then the bridesmaids pick up dresses and jewelry of the same color.

However, often girls do not want to go to a celebration in similar outfits.

In this case, bracelets for bridesmaids, created in the same style and emphasizing the style of the newlywed, and possibly the entire wedding, will help.

Advantages and disadvantages of bracelets

A few arguments FOR bridesmaids bracelets:

• A bracelet is a more convenient decoration than a bouquet. It will allow the bridesmaids to free their hands, which will be useful if you need to fix the make-up or dress of the bride;
• A special decoration will help identify unmarried girlfriends among the guests;
• Bracelets emphasize the femininity of bridesmaids, without diverting the attention of guests from the bride. At the same time, being made in the same style with the bride's bouquet and her jewelry, they successfully fit into the overall style of the wedding;
• It will not be difficult to make bracelets for girlfriends on your own. We will tell you how to do this quickly and without large time and financial costs.

It should be noted that the use of special jewelry on the hand has its drawbacks:

• It is necessary to prepare a bracelet for each, given the volume of her wrist, otherwise the decoration will cause inconvenience;
• Making a bracelet with your own hands takes time, and jewelry with fresh flowers must be made directly on the day of the celebration;
• A bracelet made of fresh flowers quickly fades and loses its attractive appearance.

Types of Bridesmaid Bracelets

To appreciate the variety of options, consider photos of bridesmaids bracelets and possible materials for their creation.

One of the most common options is bracelets made of fresh flowers. Such bracelets are usually made from the same flowers as the bride's bouquet.

They look spectacular and help maintain a unified style of celebration. Putting a bracelet of natural flowers on your hand means to emphasize the unity of the bride and her friends.

Bracelets made of polymer clay are distinguished by a variety of shapes and colors. But working with polymer clay requires special skills, so if you want to give preference to this material, you should start getting to know it in advance.

Bracelets made of rhinestones and beads will perfectly fit into the wedding theme due to the variety of shades and shapes. They will perfectly complement the outfit of girlfriends. The ability to choose beads of any color will allow you to make bracelets suitable for a wedding of any theme.

Ribbon bracelets are suitable for a wedding with many styles. Ribbons are a very affordable and easy to work material, so using them is a good solution when creating bracelets for bridesmaids.

An alternative to fresh flowers can be artificial flowers made from a variety of materials: beads, ribbons, fabrics, etc. they can be either an exact copy of real flowers, or have no natural analogues.

Therefore, the appearance of bracelets is as diverse as fantasy allows.

What do you need to create bridesmaids bracelets?

It is not difficult to make beautiful bracelets for bridesmaids with your own hands. In most cases, you will not need special skills and a lot of time for this.

Consider several ways to make such bracelets.

Natural flower bracelet

To make bracelets you will need:

• Satin ribbon;
• Several fresh flowers;
• Scissors;
• Wire;
• Floral tape;
• Glue.

To make a bracelet, take flowers, cut their stems to a length of 2-3 cm and pierce them with wire so that they can be fixed on the bracelet. We collect the prepared flowers into a single composition and wrap the ends of the wire with teip tape so as not to damage the hand of the future owner of the bracelet.

We make a small hole in the satin ribbon, into which we then thread the wire stems of flowers and fix the composition with glue. We close the ends of the wire on the reverse side with a piece of tape.
Our bracelet is ready.

Bracelet made of beads and ribbons

To make this bracelet you will need:

• Satin ribbon about one and a half centimeters wide;
• beads;
• Lighter or other small fire source.

You should start making a bracelet by treating one end of the ribbon with fire. Then we tie a knot on the ribbon and put on beads, tying knots after each of them.

Having finished stringing the beads, you need to process the second end of the ribbon with fire. The bracelet is ready. It remains to iron the ribbon with an iron and tie it on the hand of its new owner.

Photo of bridesmaids bracelets

Choosing several bridesmaids for a wedding is a Western tradition, but it has taken root in many countries. Girls who get married want to highlight their girlfriends and show a special attitude towards them. As a rule, for this they sew dresses of the same shade, select the appropriate accessories. But tailoring a festive outfit is a costly business, besides, not all girls want to appear at the holiday in the same attire. Then you can create bracelets for the bridesmaids. These original products will not only highlight the girls among the wedding guests, but also emphasize the style of the newlywed.

How to make bracelets for bridesmaids from satin ribbons

When decorating bracelets for bridesmaids, satin is often used. Ribbons made of such material look gentle, romantic and touching. The future spouse can make beautiful accessories with satin bows, use ribbons to create a fabric flower or as a backdrop for a flower arrangement with live plants. A bracelet with a satin ribbon decorated with shining beads will look stylish on the bridesmaid's wrist. This option is perfect for any style of wedding and requires very little cash investment.

Necessary materials

• glass or pearl beads (the required hole diameter is 2-3 millimeters);
• satin ribbon one and a half centimeters wide, sixty centimeters long;
• lighter;
• scissors.

Stages of creation

DIY fabric flower bracelet

Bridesmaid bracelets must match the style of the holiday. If the newlyweds are organizing a classic event or a romantic wedding, flower accessories will suit the girls. Fresh flowers are expensive, so a future wife who creates jewelry can use tissue plants. It is good if the flower chosen by the bride will be combined with the elements of her bouquet. See below for a tutorial on making a traditional airy rose flower.

Necessary materials

• Cardboard.
• Pencil (or compass).
• Scissors.
• Glue. The master class uses professional gluing equipment, which requires some experience. It can be replaced with ordinary high-quality glue-moment. Perfect Moment Crystal, which does not leave yellow spots on the fabric.
• Threads to match the material.
• Four types of fabric in a shade suitable for the theme of the celebration: chiffon, tulle, silk, cotton fabric (or other dense material).
• Needle.
• Satin ribbon.

Stages of creation

Wedding bracelet ideas for bridesmaids

When deciding how to make bracelets for bridesmaids, the future spouse should take into account the style of the event, the type of her own festive decoration, the flower arrangement in the bouquet, and the tastes of her friends. Each hand-made accessory is not only a decoration that girls will wear during the wedding, but also a memento. If the bridesmaids like the bracelet created by the bride, they will be happy to keep it as a memory of the wedding day, and the bridesmaids will be able to wear modest and simple accessories in everyday life.

From beads and rhinestones

Stylish bracelets with beads are suitable for any type of event, depending on the color scheme that the future spouse chooses. Lilac, purple details are suitable for a Provence style wedding, blue beads or pearl elements can be used for a marine celebration, a white and yellow palette will decorate a lemon celebration. With rhinestones, the bride-needlewoman needs to be more careful - an abundance of shining pebbles will ideally emphasize the official style of the wedding, and will look out of place at an informal event.

From polymer clay

If the future spouse has experience in creating jewelry or a variety of polymer clay figurines, making bracelets for bridesmaids using this material can be a great solution. The newlywed will be able to fully show her imagination by inventing accessories for the chosen theme of the event. The hero of the occasion can mold berries, flowers, delicate butterflies, animals and even non-existent plants with the help of polymer clay for a fabulous wedding style.

From feathers and braid

Feathers are a favorite decoration for girls, because they look airy, stylish and rich. Bridesmaid bracelets with these elements and braid are perfect for a retro wedding, gangster style event. In the upcoming season, boho (bohemian chic) ​​themed holidays will be especially popular, where a variety of feathers of all colors and sizes will be quite appropriate. Feathers on the ornamented lace are able to emphasize the event in the Indian style: bracelets will look interesting and unusual not on the wrists, but, for example, on the forearms of the bridesmaids.

From fresh and artificial flowers

Traditionally, when creating accessories for bridesmaids, real or artificial flowers are used. Certain types of plants can emphasize the image of any girl, and the richness of colors will allow you to find a harmonious combination with the decor of the event.

When making jewelry for friends with fresh flowers, keep in mind that they will require more cash investments than artificial flower bracelets. In addition, their stems will require recharge from a special teip tape. Real or not - the buds will be a wonderful decoration for the bridesmaids.

From decorative twigs and berries

At any time of the year, bracelets for bridesmaids, decorated with decorative or dry twigs with berries, will look great. These decor elements are suitable for an autumn, winter wedding, when prices for fresh flowers rise noticeably. They will decorate the event in rustic style. Berries and small branches look cozy, cute, romantic, create a special mood.

Video - a lesson on creating colored bracelets

Almost every needlewoman engaged in sewing could have shreds of light thin fabrics lying around at home. These materials will come in handy if you want to make stylish, original wedding bracelets for your girlfriends. To create a beautiful accessory, you need to cut out the petals, glue them to the base (lace or satin ribbon), and then decorate with an elegant brooch, beaded beads or other decorative elements to your taste. A detailed master class in the video below will help you make stylish bracelets that will be a wonderful decoration for bridesmaids.