Anyone can make a wedding decoration with their own hands. Choose an idea and make your wedding unique.

A wedding is a wonderful celebration that happens in the life of every person. To make this event perfect, you need to take into account all the little things, from the ransom of the bride to the decoration of the hall for the celebration.

• Decorating the wedding procession is an important moment, because the cars will be used by guests and the bride and groom
• The task of decorating cars is to create a special mood - a holiday, luxury and magnificence.
• Wedding cars are an essential attribute of any wedding ceremony.

A stylish and original decoration will turn out if you use a combination of different textures and materials. Together with ribbons, organza and satin are often used to decorate cars. The fabric composition looks presentable and festive.

How to decorate a car with ribbons for a wedding with your own hands? There are several ways:

The first type of decoration

• Take a tape measuring 2 lengths of the hood, and a width of 3cm to 5cm
• Pull the tape through the grille so that the middle metal bar of this grille is exactly in the middle of the tape.
• Stretch the tape in different directions of the hood to form the letter V, and secure it under the hood with tape or a linen elastic. Can be tied to any internal part of the hood
• Now make small bows or flowers out of organza or satin. How to make original bows is described in this
• The number of bows depends on your imagination: tightly spaced decor on the ribbon or at a distance of 10-15 cm. Fasten the bows on the ribbon with a thread and a needle. Between the flowers, tie pieces of ribbon to match the colors (white or pink). When driving a car, they will develop beautifully
• From a piece of white organza, make a large bow, and attach it to the radiator grill. The ends of this bow should hang almost to the level of the wheels.

Instead of a bow, you can attach a bouquet of artificial flowers to the grille.

At the back of the car, make the same bow as in the front, and attach it to the trunk door. If there are many flowers on the hood, then a small bouquet of flowers will look beautiful on the back.

Remember: All decorations on the car must be made in the same tone. It looks ugly when the decoration is white-pink in front, and blue in the back.

The second way to decorate

• Take a piece of satin or organza 20-30 cm wide. The length should be two lengths of the car hood
• At a distance of 30 cm along the entire length of the cut, attach flowers from a satin ribbon
• Attach the decoration to the hood and tailgate

The third way to decorate wedding cars

• Make flowers from white and green satin ribbons
• Collect several flowers in a bouquet, and leave 7 or 9 pieces to decorate the ribbon
• Attach 4 air ribbons to the bouquet, and fasten them under the hood of the car. The bouquet must also be attached with adhesive tape.
• Distribute the flowers along the entire length of the ribbons and fasten them

How to make a do-it-yourself decoration on a tuple is shown in the following video.

Video: Car Decoration_Option B

Ribbon jewelry options are presented in the video below.

Video: Ribbon decorations on the car

Every woman and even a man can make a bow. It is enough to take a large piece of tulle, fold it and tie it arbitrarily. It will turn out a beautiful bow, but it must be attached on all sides to the car with adhesive tape, otherwise this beauty will develop in the wind, losing its original shape.

A blank made of floral felt will be much stronger and more beautiful. Steps to create a large bow on a wedding car with your own hands:

• Take a piece of felt of the right size
• Fold its edges to the middle and glue or sew
• Gather the workpiece with an accordion and tie in the middle with a ribbon
• Now take a smaller piece of felt in a different color. Do the same with it as with the previous workpiece.
• Fold the bows together and tie with a ribbon in the middle
• Sew a golden butterfly, heart or flower in the middle - the bow is ready.

In the video below, you can clearly see how the designer folds and assembles the blanks together.

Video: Easy, fast, cheap! do-it-yourself giant bow made of felt for a wedding car

You don't have to be a designer to decorate a wedding car. It is enough to have an idea, and be able to hold a thread with a needle in your hands. It is not necessary to be able to sew on a sewing machine, making decorations is easy by hand.

How to decorate the hood of a wedding car with your own hands was described above. Here are some ideas on how you can decorate the front of your car:

Door handles on wedding cars must be decorated with flowers or bows to match other decorative elements on the motorcade. Prepare the materials that you have left from decorating the hood and tailgate. Add a floral grid, some satin, felt and other fabrics that you have in the house.

Follow these steps to make DIY wedding car handle decorations:

• Take a piece of organza measuring 25x70 cm
• Assemble the bow: with your left hand, gather the fabric between the two fingers of your right hand. Secure it in the middle with an elastic band.
• Make a second similar bow. Fasten the two parts and tie a few ribbons of one or two colors
• Sew a satin flower, heart or other decorative element in the middle of the bow. To fasten parts, instead of a needle and thread, you can use superglue

Tip: This method is suitable for creating decorations on felt, satin or floral mesh handles.

See clearly how to make such a bow in the video below.

Video: How to make a bow on the handles of a wedding car yourself?

Each brand of car has a certain size of the hood. You need to make wedding decoration of the car, based on the size of the hood and its other parts.

First, measure the length of the hood of your wedding decoration machine, and then proceed to create them. Dimensions of the hood of some car brands:

• Toyota Avalon: length in the center of the hood 105 cm, near the headlights 95 cm, width 145 cm
• Mercedes "W212": length 175 cm, width 150 cm, near the headlights 90 cm
• Ford Focus: length 80 cm, width 60 cm
• Audi A3: length 100 cm, width 150 cm

Important: In order not to make a mistake when creating decorations, first measure the length and width of the hood of all the cars that will be in the tuple. Based on these sizes, sew ribbons and other decor.

The traditional decoration on the roof of the car is two rings in flowers. But now you can meet a wedding cortege with hearts, a basket of flowers and other decor.

Decoration on the roof of a wedding car in the form of two rings is easy to do with your own hands. To do this, follow these steps:

• Cut the soft water hose into 3 pieces of different sizes. The small and middle part will be rings, and the largest part will be the basis for the structure.
• Insert a battery into one end of the ring, hold it with your finger. Then put the other end of the hose on it and secure the joint with tape
• Make the second ring in this way.
• Wrap the rings with gold floral foil
• Use superglue to secure the two rings. Glue them to 15 cm wooden rulers, and fix the blanks on the largest third cabin
• Decorate the design with fresh or artificial flowers. The accessory is ready. Attach it to the roof of the car with adhesive tape

There are many other options for decorating the car of the newlyweds:

Do-it-yourself decoration on the roof of a wedding car - swans

Do-it-yourself decoration on the roof of a wedding car - hats

Do-it-yourself decoration on the roof of a wedding car - hearts

Do-it-yourself decoration on the roof of a wedding car - doves

In the video below, you will see many other options for decorating the roof of the newlyweds' car.

Video: decorations on the roof of a wedding car

The modern fashion for decorating wedding cars has gone so far that many people already prefer not just to make rings on the newlyweds' cars. They come up with original jewelry that emphasizes the individuality and high status of the future husband and wife.

Make a crown with a veil from rings for a car for a wedding with your own hands:

• Make 6 rings: 2 small, 3 medium and 1 large. Carry out this decoration as described above, as for two rings of soft hose and special foil
• Glue the blanks on a ruler 50 cm long
• Attach the resulting structure to the roof of the car
• Decorate the design in the form of flowers in front and a veil in the back - the original ring decoration is ready

Do-it-yourself rings on a car for a wedding - crown

Tip: You can make a crown out of cardboard by painting it in gold or silver. Do not be afraid to fantasize, and your wedding guests will remember for a long time!

Now in the wedding cortege they decorate the mirrors of cars, before they managed only with decor for the hood and roof. Make decorations on the mirrors of wedding cars the same as decorations on the hood. Thanks to this, the entire decor in front of the car will be in harmony.

Tip: If you made a bouquet of 15 flowers on the hood, then a bouquet of the same flowers, but smaller, is suitable for the mirror. By quantity, 5 or 7 pieces are enough.

To create a bouquet, you will need cardboard, superglue, artificial flowers and some fabric in a contrasting color. Cardboard is needed for the base on which the entire bouquet will be attached.

So, prepare flowers to make bouquets for a wedding car with your own hands:

• Cover the cardboard with fabric and secure with tape or glue
• Arrange large flowers along the edges of the base, and small flowers in the middle. Glue one large bud in the center, but you can do without it. Do whatever your fantasy tells you
• If there are leaves left from the flowers, glue them along the edges of the workpiece
• Now attach the bouquet to the ribbon on the car - the decor is ready.

Tip: A bouquet of flowers in contrasting shades will look beautiful, for example, white and red, pink and red, white and pink, and so on.

Video: Do-it-yourself wedding boutonniere on the car door video Master class

Video: Do-it-yourself wedding car decoration.

As mentioned above, along with ribbons, the newlyweds' car is decorated with tulle. Bows, flowers, imitation veils and more are made from it.

Here is another way to decorate a wedding car with your own hands with tulle - pom-poms attached to a satin ribbon:

• Cut the tulle into rectangles 10-20 cm wide, depending on the size of the pompom, 50 cm long
• Put all the rectangles together and add one rectangle in a contrasting color.
• Fold the fabric like an accordion
• Tape the middle
• Spread each layer to make the workpiece lush
• Cut the edges in a semicircle or zigzag, according to your imagination
• Straighten all the layers again - the pompom is ready

In the video, the designer tells how to make a beautiful tulle pom-pom.

Video: How to make pompoms from tulle?

Another way to make a tulle pom-pom is described in this video.

Video: How to Make a Tulle Pom Pom Easy - DIY Style - Guidecentral?

Newlyweds like to decorate the car with big hearts, because it is a symbol of long and true love. It is easy to make such a heart both from artificial flowers and from real roses.

Important: If you will make such a decor from living material, then choose fresh, just blossomed buds. Otherwise, the flowers may quickly wither.

How to make hearts on a wedding car with your own hands:

• First, make the base: cut out a heart from paper, and then transfer the pattern to cardboard
• Apply glue to the cardboard heart. Crumple up old newspapers or sheets of magazines, straighten them a little, and attach them to a cardboard blank with glue - this is necessary to add volume to the heart. When all the cardboard is filled with paper lumps, seal the entire blank with tape
• Wrap the future heart with red lining paper or floral felt, and secure all edges with a stapler.
• Cut off the stems of the flowers to make a smooth base.
• Now glue one flower at a time to the red blank, pressing the flowers tightly against each other
• When the entire surface of the heart is filled with flowers, sprinkle the buds with water and sprinkle with floral glitter. After that, you can attach the heart to the car
• Using the same technology, make a white heart, but wrap the paper blank not with red, but with white cloth

The following video shows how you can make a big heart out of fabric roses, which are also handmade.

Video: How to make a big heart with your own hands?

Wedding chores are pleasant, but this fuss is a little unsettling, and the newlyweds themselves and their parents often do not know what to do and where to start, for example, when decorating cars. Step-by-step stages will help to outline the scope of work and their sequence.

• If the car is decorated with tulle and artificial flowers, then you need to make rosebuds in advance
• Measure the length of the hood and cut off the required size of ribbon or tulle. Get your elastic band ready
• Make two rings on the roof of the car, as described above, or any other decor
• From flowers of a smaller size, make bouquets for car handles and its mirrors
• If there is a flower basket on the tailgate, then make it in advance. How to make such a basket, read the article about DIY bouquets
• If, as planned, a bow is located on the trunk door, then buy tulle in advance and make this decor
• In the morning, on the wedding day, start decorating from the hood of the car: pull ribbons or tulle and fasten it under the hood. Attach flowers along the entire length of the tape, and place a bouquet of flowers on the radiator grill
• Now start decorating the back of the car: fasten the tapes, attach a bow with a stapler or tape, or install a basket of flowers
• Decorate the roof of the car: install a structure with rings or other decor, fix it
• After that, you can proceed to the design of door handles and mirrors.
• Check if all parts are fastened well. If in doubt, strengthen the fastening, because it is important that the structures and bouquets are installed beautifully, correctly and firmly.

The hood of the newlyweds' car should be flawlessly decorated, because people immediately pay attention to this part of the wedding car when the cortege drives up to the bride's house or to the registry office.

How to properly and firmly fix the fabric on the hood of a wedding car, and attach decorations? Some nuances should be taken into account:

• High-quality car decoration for newlyweds is a difficult task that requires certain skills and devices. But you can handle it on your own
• In order for the ribbons to hold well on the hood, it is necessary to process one edge and sew a linen elastic to it. The second end of the elastic is tied with the tape under the hood or sewn to the other edge of the tape
• You can attach decor to ribbons (bows, flowers, etc.) using superglue
• Large decorations in the form of hearts, flower baskets or bouquets, tie tightly to car parts: to the radiator grill, to handles and mirrors
• To attach a large bow to the tailgate, first stretch the ribbons, and then tie a bow to them

Live as a decor on the car look great. They create a special festive energy, emitting a unique aroma.

If you think that dolls, artificial flowers and just a few ribbons on the hood are trite, then decorate the wedding car with fresh flowers.

Important: A bouquet of fragrant roses for the bride, flowers in her hair, decorating the hall with live bouquets and decorating the car of the newlyweds with fresh, recently plucked buds, will emphasize the high status of the newlyweds.

Tip: If the car is large (convertible or limousine), decorate it with flowers on the inside. The unique aroma will accompany you all the way.

Even delicate flowers will stand the test of movement if you use a special sponge with water to make bouquets. You can buy it at any flower shop.

Tip: Place the decor in such a way as not to block the driver's view.

If you think that you won’t be able to make such an original decoration on your own, contact an experienced florist who knows the language of flowers and understands decorating.

Balloons are the most inexpensive type of decoration for a wedding procession.

Tip: Buy only quality latex balloons from trusted or well-known manufacturers. Chinese counterparts can burst when driving cars.

Decorating wedding cars with balloons is easy to do with your own hands:

• Make a garland of balloons by tying them to each other. Make this decor with balloons in two colors, for example, red and white, pink and white, and so on.
• Tie a garland to the hood of the car and several of these products to door handles and mirrors

Remember: Jewelry should not interfere with the driver while driving!

If you are planning to do it in Retro style or the theme of your celebration is “Love is…”, then decorating cars with balloons will be the brightest decoration for the cortege.

How to make a heart out of balloons is described in detail in the following video.

Video: Balloon Heart - Wedding Decoration

When decorating a wedding procession, much attention is paid to the decor of the newlyweds' car. Therefore, the question often arises: how to dress up, decorate the car of guests for a wedding?

Remember: All cars must be decorated in the same style.

On guests' cars, it is enough to attach bouquets with flowers to the door handles and mirrors. If you want, then you can trim the hood with ribbons. In any case, cars for guests should look more modest than cars with young people.

Think about decorating cars in advance so that before the wedding itself you don’t fuss, worrying about what design will be and what materials to buy.

Here are examples of decorating wedding cars - photos:

Examples of decorating wedding cars: photo Examples of decorating wedding cars - balloons


Examples of decorating wedding cars - a carriage with flowers

There are a lot of options for decorating cars, and even carriages for a wedding. Choose the appropriate option, add your imagination, and create real design masterpieces!

Video: Original and beautiful decoration of wedding cars.

The wedding begins with preparations. In addition to dresses and other solemn paraphernalia, the design of the wedding cortege occupies a very significant place. The main focus is the lead car, but all accompanying persons must also follow the chosen decor style. Do-it-yourself decoration on the handles of wedding cars can be the highlight of the departure of the newlyweds and guests.

What can be used to make decorations on the handles of cars

The choice of materials for the manufacture of decor can be limited only by the flight of the master's imagination. The main selection criteria are the season and finances. Why time of year? There is a direct connection here: if the wedding takes place in the summer, then God himself ordered to decorate the cortege with fresh flowers.

If the celebration falls on the cold season, then they can easily be replaced by bows, artificial flowers, or other stylish things.

Decoration of car handles with fresh flowers

Flowers always and everywhere remain an unsurpassed decoration. They bring romance and originality, sophistication and touching. But the choice of variety should be taken with special care when it comes to fresh flowers. The time when they will remain fresh and beautiful depends on this. Delicate roses, for example, in the summer heat will quickly lose their original appearance, and withered buds will not add gloss to the wedding procession at all.

For a long voyage, it is better to choose more resistant varieties of flowers. For example, daisies, or gerberas.

But lovers of more delicate flowers can resort to some tricks to extend the life of their appearance. If preference is given to roses, then the best option for attaching them to car handles is with the bud down. It is better to choose unblown small flowers - this is more likely that they will look fresh.

To do this, you need to cut the stems of several (usually 3) buds to different lengths, add small decorative flowers of hepsophila and aspidistra leaves:

From these flowers, make a small multi-level bouquet, and so that it retains its touching charm for as long as possible, wrap the stems with a damp cloth, and only then with decorative paper. With the help of ribbons, the composition is fixed on the handle of the car. A bush rose is even better for these purposes. Flowers themselves look like a bouquet and do not require additional decorations.

In a word, it is not difficult to make a beautiful composition from fresh flowers.

It’s another matter if the door handle decorations are intended to be done with your own hands inside and out.

Decoration of car handles with satin ribbons

Stylish and no less beautiful decorations can be made by hand. For this, various decorative materials are used, such as ribbons, artificial flowers, fabric and others. Here are some examples of the manufacture of wedding accessories for the door handles of the cars of the newlyweds' wedding procession. The easiest and most budget option is satin ribbons. Easy enough to make bows. But corny to tie them on the handles will look too easy. Yes, and such bows are at risk when the car is moving very quickly. You can make beautiful decorations for car handles from satin ribbon or organza. They will look more elegant than ordinary bows.

Description of the process of making a satin ribbon bow:

To decorate one car, you will need two types of satin ribbon: 5 cm wide - 1.6 m, and 2.5 cm wide - 2.5 m, threads, scissors and a glue gun.

We begin to make a big bow.

1. To do this, we bend the edge of the wide ribbon inward to make a half of a bow about 10 cm long.
2. Then we do the same with the second half, holding the central part with our fingers.
3. We repeat all the steps again, laying the layers of tape in an X-shape, thereby giving them the shape of the future bow.
4. When 2 petals are obtained on each side, we sew the middle with a thread and cut off the excess tape with scissors.
5. Then we tighten the stitches of the thread and wrap it around the middle of the bow several times to fix it and tie a knot.

That's it, the big bow is ready!

Now let's start making a small bow.

1. We take a narrow ribbon and make the same bow out of it as the previous one, only half as wide.
2. When both parts of the accessory are ready, we tie a piece of ribbon about 10 cm long into a knot, without tightening it too much.
3. In the middle of a large bow, we apply glue from a gun (if it is not available, you can squeeze it out of a tube), apply a smaller bow and so that it grabs, lightly press it with your fingers and hold for a few seconds.
4. In the middle of a piece of ribbon, which is tied in a knot on the back side, also apply glue and glue it across to the already finished bow.
5. The knot itself should be on top with the outside facing out.
6. Bend the ends of the tape inward and fix them in the middle with glue. Cut off the excess ends of the tape with scissors.

Our bow of cats!

Now the final touch remains - to decorate the finished product.

Fold a piece of tape about 30 cm in the middle in half in width, dripping into the center of the glue.

Then apply glue to one side and fold the tape in half along the length.

Now we apply the top to the bottom of the bow, having previously applied glue and hold both parts for a few seconds so that it grabs.

We cut the free ends of the tape obliquely with scissors.

It turned out a beautiful bow with curly ends.

Having threaded a plastic clamp in the middle, such an accessory is easy to fix on the handle of a wedding car. It will hold securely.

Watch the video below for a detailed description of the production.

Artificial flowers

No less beautiful are decorative flowers made of corrugated paper. From them you can make stylish boutonnieres to decorate car handles.

Tulle buttonholes

Boutonnieres made of tulle and artificial flowers look delicate and elegant.

By the way, you can use corrugated paper roses for them, the description of which is given above.

As you can see, it takes quite a bit of time to make all these accessories, and original handmade jewelry will add originality and sophistication to the festive cortege.

A wedding procession is an indispensable attribute for the wedding day. According to tradition, cars for the heroes of the occasion and their guests are magnificently decorated in order to announce a happy event to everyone.

Special holiday agencies are engaged in decorating wedding cars, but the payment for their services is quite high. In order not to undermine the budget of the newly-made family, you can make decorations with your own hands.

A good opportunity to show your originality and ingenuity by decorating a wedding cortege in an interesting way. There are many ideas that you can bring to life with your own hands. Basic jewelry options:

It doesn't matter which option is chosen.

The most important thing is that the decoration emphasizes the solemnity of the event, looks beautiful, elegant and evokes positive emotions.

Tips for choosing decor and decorating cars

When choosing a car for a wedding, it is best to focus on classic white, silver and black colors. If the bride and groom will travel in different cars, then the groom's car should be black, and the bride's car should be white. It is important to make the main emphasis on the car that will carry a couple from the registry office.

If the cars will be decorated with ribbons, then you should make sure that the colors of the ribbons and the car match each other, but at the same time do not merge. Decorations should not block the driver's view, especially when it comes to the decoration of rear-view mirrors.

In order for the festive cortege to capture the imagination of others, the following rules must be observed:

• determine the number of cars. The most beautiful decor should be on the car of the newlyweds, and on the cars of the guests - more modest;
• decide exactly where the accessories will be attached. Most often they decorate the hood, bumper, glass, handles, interior, trunk and wheels;
• choose a color scheme according to the color of the car. Contrasting colors look best;
• the theme of the design of the cars should echo the stylist of the celebration. If the wedding does not adhere to a special theme, then the colors should be similar to the flowers in the bride's bouquet;
• take into account the shape of the trunk or hood, so that the decoration looks natural and organic;
• if fresh flowers are chosen as decoration, then they should be with strong leaves and stems;
• choose a method of attaching decorative elements. It can be glue, adhesive tape (regular and double-sided), special suction cups;
• do not develop a high speed so that the decorations are not deformed or fly off the car. It is worth taking a responsible approach to the choice of the driver.

If you follow these simple rules, then the decorations of wedding cars will last throughout the holiday, and will delight the eyes of both guests and newlyweds, and emphasize the importance of the event.

Color solution

The color scheme of decor elements for wedding cars should be in the same style as the outfits of a young couple, so that there is no sharp difference between them in the photographs. You should not choose all the colors of the rainbow at once, it is better to stop at 2-3 shades. Then the decoration will look festive and organic.

For dark-colored cars, light, discreet shades should be chosen. White, beige or silver cars are best decorated with bright, saturated colors. If light compositions of flowers are chosen, complement them with contrasting details.

Decoration on the handles with your own hands

The design of the handles on the doors should not be too lush, so as not to impede their opening. The most optimal solutions:

How to make a pendant to decorate the door handles of a wedding car

To make a heart-pendant for the handles of a wedding car with your own hands, you need to take:

• a heart-shaped base made of plastic, wood or foam;
• tulle fabric measuring 25 * 6 cm;
• a satin ribbon for wrapping the base and a ribbon of a different color for the petals;
• flower - for example, a rose;
• stamens or beads, cut in half;
• beads collected on a fishing line;
• glue gun, scissors, tweezers, needle, thread, lighter or matches.

Master class on making a pendant:

1. If there is no ready-made heart, then you need to draw it through a stencil on foam plastic (or a metal lid from a can, an old CD), and cut it out. You can also form a heart out of wire and sheathe it with foam rubber;
2. Apply glue to the edge of the tape, press it to the bottom of the heart and wrap it around. It is better to use small pieces of tape so that the winding is neat;
3. Glue a ribbon with strung beads along the frame of the product;
4. Make a bow out of tulle - fold a piece of fabric in half lengthwise, gather the bottom edge and fasten with a needle and thread in the form of a round bow;
5. Prepare the petals - fold three pieces of ribbon of the second color in the form of a loop and seal the edges with fire;
6. Using a glue gun, attach the petals to the rose, and the stamens to them. Glue all this to the bow;
7. Place the composition with a rose on the base;
8. Attach a ribbon in the form of a loop to the top of the heart so that you can hang the decoration on the handle.

The decoration option can be arbitrarily changed, it all depends on the imagination of the master.

DIY wedding bonnet decoration

The easiest and fastest way to decorate a car is with ribbons. Even a person who does not have special skills will cope with this. There are several ways to decorate the hood with colored ribbons.

First way:

1. Take a tape, the length of which exceeds the length of the hood exactly 2 times, its width should be 3-5 cm;
2. Pass the tape through the radiator grill so that the tape runs in the middle of the metal bar;
3. Stretch the tape in opposite directions along the hood in the form of the letter V and secure with tape, or tie it to the inside of the hood;
4. Make bows from organza or tulle and fasten to a ribbon. The number of bows can be different - either they will sit tightly to each other, or at a distance of 10-15 cm. You can attach them simply by sewing with a thread;
5. Additionally, small pieces of ribbon can be attached between the bows, which will flutter beautifully while moving;
6. From a large piece of organza, make a bow to decorate the lattice.

You can make another such big bow and fix it on the trunk. Just keep in mind that they must be made in the same color.

Second way:

1. Take a wide satin ribbon as long as 2 hood lengths;
2. Prepare flowers from a satin ribbon - bend the strip in half lengthwise and roll up. Strengthen the base with a needle and thread;
3. Sew flowers along the entire wide ribbon;
4. Attach the decoration to the hood of the car.

Third way:

1. Form flowers from white and green ribbons;
2. Make bouquets, putting aside 7-9 pieces;
3. Attach 4 ribbons to the bouquet and fasten them under the hood;
4. Arrange the remaining flowers throughout the ribbon.

Such simple options for decorations on the hood of a wedding car look great, and you can make them on the same day as the wedding. Just make flowers or bows in advance.

How to decorate a wedding car

The most common decoration on the roof of a wedding car is two wedding rings surrounded by flowers. Such an element of decor can be quickly made with your own hands. To do this, you need to take:

Ring making steps:

1. Cut the hose into 3 parts: large, medium and small. Medium and small - for rings, and large - for the base;
2. Insert a battery on one side of the future ring, connect the ends of the hose into a circle. Fix the joint with adhesive tape;
3. Also make another ring;
4. Wrap the resulting circles with foil, secure with tape;
5. Attach both rings to each other with super glue;
6. Put on rulers, glue and fasten on a large part of the hose;
7. Add flowers to the composition.

The decoration is ready - you can put it on the roof of the car and fix it with a wide adhesive tape.

A wedding is one of the most important holidays in a person's life. Therefore, it is customary to celebrate the wedding day widely and brightly in order to emphasize the importance of the moment.

Decorating a festive cortege is something that a modern wedding cannot do without. To make the decor unusual, exclusive, and the way you want, you need to do it yourself. And then save it and pass it on to your children.

Another small workshop on decorating a car is in the next video.

Many couples start preparing for the wedding in advance, because there is so much to do: apply, find a place for a celebratory banquet, plan a wedding photo shoot, create a guest list. An important detail of the preparation for the celebration is the order of a motorcade that will deliver the newlyweds with invited people to their destinations. According to tradition, wedding cars are generously decorated so that all passers-by know that young people are celebrating their marriage. The decor of the motorcade can be prepared by a vehicle rental salon or made independently.

How do wedding cars of young people and guests decorate?

The decoration of a wedding car largely depends on its brand, appearance, color, model. Vintage cars are almost not decorated: as a rule, they are only slightly decorated with items that give an understanding of their belonging to the wedding procession. These can be real or artificial flowers placed on the grille, or large rings on the hood. Limousines, as well as other "status" models of cars, are not recommended to be decorated with a lot of details - a few contrasting ribbons, a small flower arrangement or figurines of the bride and groom will suffice.

If the wedding procession consists of ordinary cars, the heroes of the occasion can use flower garlands, balloons, bright ribbons, creating a unique design. Often, such motor transport escort of the bride and groom is made up of cars of friends, parents, acquaintances, so they are all of different colors and models. To make the whole procession look beautiful and harmonious, the newlyweds must follow several rules:

1. Cars driving ahead are as similar as possible in shades, preferably not too bright (black, white, gray, silver).
2. Cars of the most saturated shades complete the column - red, yellow, green, blue.
3. All cars must be decorated in the same style. The newlyweds will have to choose the decor of a calm classic color to match all the cars of the wedding procession.

However, there are exceptions to all rules. In some cases, the bride and groom can put cars of bright colors at the head of the wedding escort - it all depends on the style of the wedding, the tastes of the future spouses. It is good if the shade of the car and its decorations are in harmony with the outfits of the heroes of the occasion. So the wedding photographer will be able to take some beautiful shots outside while the newlyweds are inside the car. When decorating a car, you need to make sure that the decor does not look too colorful - use a maximum of two or three colors.

To make the decor look elegant, light, soothing shades should be chosen to decorate dark-colored wedding cars, and contrasting bright details should be used on white, milky, sandy cars. When ordering a motorcade in an agency, it is worth discussing the issue of decor in advance. The rules of some companies prohibit decorating wedding accompanying cars with their own hands. On cars covered with expensive paint, it is not recommended to glue or fasten anything. To avoid an unpleasant situation, everything needs to be discussed when contacting the agency.

In no case should decorative elements interfere with the driver's view. Lush flower garlands in front of the windshield look great, but increase the risk of an emergency - you should not put your health at risk. You also need to take care of reliable fastenings of decorations so that rings do not fly off the hood during movement, the ribbons do not fray, and the balls do not fly off onto the track. For self-decoration of a wedding car, the following decor elements are used:

• satin, plastic, floral ribbons;
• fabrics (satin, organza, chiffon, silk);
• fresh flowers or artificial plants (which are more often used in winter);
• floral net, balloons;
• figurines or dolls of the bride and groom, figurines of rings, hearts, doves, other birds and animals;
• paper applications, posters, pompons;
• numbers with comic inscriptions: the groom's gang, the bride's mafia.

If the celebration is themed (a new trend), car decoration for the wedding should be associated with the style of the holiday. For example, if the wedding is in a marine style, future spouses can decorate the car with shells, starfish. There are a lot of ideas for decorating a car with your own hands for thematic events, the main thing is to stick to the chosen direction for a harmonious appearance.

Wedding decor of the bonnet with ribbons and butterflies

There are several options for self-decorating a wedding car with butterflies and ribbons:

• In the first case, artificial insects are attached with special suction cups that prevent them from slipping off during movement. Ribbons should decorate the butterflies themselves or fix them on the radiator grill, on the door handles.
• The second design option for a wedding car involves the creation of a stretched "web" on the front of the hood of paper or nylon ribbons, where artificial insects are sewn.

Touching butterflies will be a wonderful symbol of a wedding celebration. Future spouses can independently cut out insects from cardboard, paper, or buy them in stores that sell needlework items. Graceful, delicate butterflies of all colors of the rainbow you can find in floristic salons - they are often decorated with festive bouquets.

How to decorate a car for a wedding with flowers and tulle

Floral arrangements are perfect for decorating a car during a wedding. Sometimes a small bouquet of live plants is enough to give the car a festive look. It looks beautiful when the cortege is decorated with flowers and fabrics at the same time. For example, a combination of flower arrangements is used along with tulle. The fabric is fixed on the hood or trunk, stretching from the glass to the bottom, where the tulle is fixed under the cover. As a rule, this design is asymmetrical. Decoration mounting options:

• Composition on the radiator.
• Flowers in the narrowest cluster of tulle near the windshield.
• Both mounting options.

Door handle decor

The handles of a wedding car are usually decorated in a concise manner. It can be a cute bow using satin, tulle, lace ribbons, a small flower boutonniere, artificial plants made of silk fabric. The heroes of the occasion can show originality by decorating the handles of vehicles with beads, rhinestones, sheathing them with openwork fabric. To make this part of the car look elegant, you do not need to overload it with decorative elements. For a beautiful decoration, one bright flower and a few falling ribbons are enough. See video for options:

Roof decoration on a wedding car with rings

Large wedding rings on a wedding car symbolize the marriage of the newlyweds, so they will be an ideal option for decorating a car for a celebration. The accessory can be mounted on the radiator, hood, but it also looks harmoniously on the roof of the car. Often the product is additionally decorated with bells. As a rule, rings "sit" on a pillow of fresh or artificial flowers. Another original decoration option is the use of two golden hearts instead of rings.

Master class on making wedding rings

Large wedding rings used as decorations for the newlyweds' car can be made by yourself. To create them, you will need the starting materials: water flexible pipes (about 2 meters), three AA batteries, a golden floral ribbon, two wooden rulers, artificial flowers, adhesive tape, superglue, scissors. Step by step guide to making wedding rings:

• Cut the hose into three pieces. All of them should be of different sizes: from the largest to the smallest. The small and middle parts are future wedding accessories, and the large part will become the basis of the whole structure. The largest ring should not be larger than the prepared rulers in diameter!
• Insert an AA battery into each pipe on one side so that it sticks out halfway, then connect it to the free side of the pipe. Check if the ring is tight. If there is any doubt about the reliability of fastening, additionally fix the junction with adhesive tape or superglue.

• Wrap the resulting rings and both rulers with golden floral tape.
• Using superglue, attach the middle ring to the smallest one, as shown in the photo.
• Glue the rings with superglue or tape to the rulers, then secure them to the largest round pipe.

• It remains to steam the artificial flowers, smooth out the bumps in order to decorate the base-ring holder with them (see photo below).

• The accessory is ready to be mounted on the hood or roof of the wedding car.

How to make a heart out of balloons for a car with your own hands

Decorating the car with balloons looks solemn and festive. Future spouses can simply hang them on a web of tulle, nylon or satin ribbons, or create original compositions. An interesting idea for decorating a wedding car with balloons is a heart created with balloons. This symbol will be a wonderful decoration of the solemn cortege. Watch a video that will help you create such an original wedding accessory yourself:

Video: do-it-yourself car decoration step by step

Joint production of rings for the roof of a car, creating a huge heart with balloons, composing a flower arrangement with artificial plants - all this will help the heroes of the occasion save money, have fun, show imagination while working on a common cause. An interesting activity will unite the bride and groom even more before the wedding day, leaving a pleasant impression.

When the basic preparations are completed, it remains only to fix all the decoration elements on the wedding car. Future spouses can do this on their own or connect friends who will be happy to help them. Watch a funny video where young people decorate a wedding car.

Car decorations, decorated champagne, invitations, candles, garters, wedding ring pads. How much do you need to prepare for the wedding celebration, so that this day and holiday will please everyone, be perfectly organized, and remain in the memory of the newlyweds and guests as magical, joyful, happy. Wedding trifles can make the celebration original, unique. Timely preparation of the necessary wedding attributes will help to avoid unpleasant situations, embarrassment.

What you need to remember to buy for the wedding - a list of little things

The list of little things needed for a wedding can be completely different for each couple who is preparing for marriage, it all depends on the preferences of the newlyweds, their taste, the theme of the event. Wedding checklist:

1. For guests:

2. For the ransom of the bride:

3. Decorations for the car:

4. Wedding details for the registry office:

• Wedding rings.
• Cushion for rings.
• Wedding towels.
• Little things for meeting and congratulating the newlyweds after the registry office (rose petals, grains of wheat or rice, confetti).

5. For a wedding walk:

6. Restaurant Wedding Trivia:

Ring pads

A pillow for rings is a wedding accessory that will help create a festive, romantic mood, will be a great decoration for wedding rings, and in the future it can become a family heirloom and will be inherited. Do not forget about the little things and save on them, because thanks to such small, seemingly insignificant things, the wedding celebration becomes spectacular, memorable.

The choice of such a trifle should be approached with all seriousness, because it is important that the pillow be decorated in the same style as the wedding celebration as a whole. The pads can be completely different: decorated with openwork lace, beads, beads, rhinestones; made in different colors and sewn in different shapes (heart-shaped, round, rectangular, square). Rings on such pads are held by ribbons or bows.

Glasses and decorations for them

When choosing glasses, the newlyweds should take into account the style in which other wedding accessories are decorated so that everything looks harmonious. Do not forget that the glasses will remain forever, so they should please the eyes and become a pleasant reminder of a happy day in the life of the newlyweds. Glasses can be completely different: glass with the image of doves, swans, hearts; crystal without unnecessary design details or with original handmade decor. For decor, they mainly choose different little things:

• Beads, rhinestones, beads.
• Satin ribbons, lace, tulle.
• Polymer clay flowers paired with Swarovski crystals.
• Decoration of glasses in the form of the bride and groom.

The newlyweds at the wedding pay attention to the glasses for whipping. They buy not expensive glasses and decorate them with small details. The decoration is selected in accordance with the general theme of the wedding, or vice versa - choose a different decoration so that the glasses become a bright accent that attracts attention. Whipping glasses often fall into the camera frame during a walk of the young, after which they remain in the pictures in the album, so it is important to take into account such a trifle.

Wedding towels and salt shakers

The tradition of using towels at a wedding dates back to the time of Russia. The brides prepared their own dowry, including such wedding trifles as towels. It was believed that the more beautiful, neater and with fewer knots the towel was embroidered, the happier the marriage and life of the spouses would be. Few of the brides take on the embroidery of towels, because in stores, wedding salons there is simply a huge selection of these little things. Towels are traditionally kept by newlyweds throughout their lives as a symbol of love, fidelity, unity.

While preparing for the wedding, it is necessary to prepare the required number of towels, it is important to understand and remember their purpose:

• Hospitable towel. They put a loaf, a salt shaker on it and meet the young people with it at the entrance to the restaurant.
• Wedding - use it during the wedding ceremony.
• Towels for icons.
• Allied towel, designed for bandaging the hands of the newlyweds at the wedding.

According to tradition, at the entrance to the restaurant, the newlyweds are met by parents with a towel, on which there is a loaf and salt. Solyanka can be made directly in the loaf dough or it can be purchased separately. Such a wedding attribute can be made of wood, ceramics and decorated with ribbons, beads or beautiful ornaments. Solyanka is always kept by the spouses, as a reminder, as a reminder of how the spouses “annoyed” each other for the first and last time in their life together.

Decorations for wedding cars

At the wedding, everything should be perfectly prepared, thought out to the smallest detail. The wedding cortege is no exception. Car decoration should be given special attention, because the little things with which cars are decorated distinguish them from hundreds of other vehicles, make them bright, festive.

Decorations for cars can be found in abundance in salons, wedding car rentals, floristry shops and will make up a composition of fresh flowers. If desired, the newlyweds can make decorations on cars with their own hands, using their imagination, paying attention to the little things. In order to learn some rules for the design of a tuple, to get acquainted with a master class on creating simple ribbons, watch the video:

Figurines for cake decor

The finale of the wedding banquet is the enchanting serving of a huge wedding cake, the top of which is customarily decorated with cute figurines in the form of a bride and groom, cute doves or charming swans. Such a tradition came to us from Europe and it is difficult now to imagine a truly festive cake without a bride and groom standing on it, made of mastic.

A wedding cake is a real work of art and a figurine should complement it, so when choosing this little thing, it is important to focus on size and shape. Figures can be funny, funny, romantic. In addition to the bride and groom, the cake can be decorated with angels, flower arrangements. The main thing is that the figurines go well with the wedding cake, and it all looks harmonious.

DIY wedding accessories master class (photo)

Wedding little things are not difficult to find in stores, there is a huge selection of craftsmen who are ready to make accessories to order, taking into account all the wishes of the newlyweds. But the ideal option is to find a little time and create the necessary little things with your own hands, putting a piece of your soul, heart, love into them. These lovely accessories will be invaluable for spouses, they will cherish these little things all their lives, like their love.

Flower cushion for wedding rings

The process of exchanging wedding rings is an exciting moment for newlyweds. The photographer will definitely capture this moment, and the pillow for the rings will get into the frame. Therefore, it is worth approaching the choice of this trifle with all attention and responsibility. The stores offer a huge selection of such accessories, but they are all the same type, fabric, sometimes even boring, but you want something special, unique. It is not difficult to create a truly original pillow with your own hands.

To create a wedding flower pillow you will need:

• Satin ribbon to match the composition.
• Wire.
• Gardening scissors.
• Floral sponge (size approximately 4x5x2 cm).
• Orchid, amaranth, hydrangea, brunia berries, eucalyptus, reindeer moss.

Stages of creation:

Bow for wedding shoes

A variety of little things will help to make a small re-design of wedding shoes, to give them sophistication. It is possible to decorate them using a beautiful bow, rhinestones, beads. To create a bow you will need:

• Bride's wedding shoes.
• Satin ribbon to match the shoes.
• Rhinestones.
• stapler.
• Scissors.
• Clips for shoes.
• Adhesive for fabric.

Stages of creating little things for decor:

Preparing for a wedding takes a lot of time, effort, finances, but by taking the time and taking care of even the smallest things, as a result, the newlyweds will get the wedding of their dreams, where everything will be thought out to the smallest detail, organized at the highest level and done with love. And if future spouses create some accessories with their own hands, investing a piece of their soul, then they will please the eyes and warm the heart, and in the future they will become a reminder of the happiest day of their life!