Asters are great for creating chic bouquets and compositions. The variety of shades and shapes of these flowers is simply huge, which allows you to create even the most complex compositions. In addition, autumn "stars" are very versatile plants that fit into any bouquet, organically combined with even the most exotic flowers. In today's tutorial we will show you how to make asters from corrugated paper with your own hands.

To create an asters from corrugated paper, we will need the following tools and materials:

• crepe paper of a bright and saturated shade to create a bud;
• a piece of green colored paper;
• green crepe paper;
• scissors;
• threads or very thin wire;
• glue stick;
• wire for the base of the stem;
• ruler.

Master class on creating flowers "Asters from corrugated paper with your own hands":

1) So, first you need to create an aster pedicel. We wrap the prepared piece of wire with a small crepe strip. So that in the future the stem does not lose its original appearance, we fix the tip of the tape a small amount glue.

We roll the first blank into a ball.

2) We pierce the resulting ball with the tip of a thin wire.

Then we wrap the ball with the second segment, and fix the lower part with a thread.

We wrap the base of the bud with a short strip of crepe paper.

Now you can start creating aster petals. Cut off the roll crepe paper Here is a strip about 5 cm wide.

Then we lay out the tape and cut it into several parts.

To create the inner petals, we need two or three of these strips. Using scissors, carefully twist the ends of the petals. In order for the petals not to come off, it is better to twist several strips at once.

4) Now we apply glue to the end of the workpiece and attach it to the ball at the end of the stem. When the glue dries a little, we begin to slowly wind the strip.

5) Pay attention to the fact that the inner petals should twist inward. Add two more strips in the same way.

We wrap the base of the blanks tightly with a thread.

We also stretch the tape itself at the base of the petals.

6) We wind these blanks reverse side so that the petals are turned outward.

When all the blanks are attached to the stem, their lower part must be processed with threads.

After we hide the threads with green crepe tape.

7) Cut out the sepals from a green strip of crepe paper. Just like the petals, we twist the leaves.

We divide the resulting workpiece into two parts. Then, in turn, we attach them to the aster receptacle.

From colored paper, you need to cut out two or three leaves of a rounded shape.

Glue the leaves with glue to the middle of the stem.

From sweets and colored paper, you can make flowers for a variety of sweet bouquets. Today's master class will demonstrate the manufacture of flowers such as asters. A simple and beautiful crepe paper and candy aster can be made from paper of any color, because real flowers have the most different colours and shades. My simple and step-by-step master class will help you make paper asters with your own hands.

For work I needed:

• purple corrugated paper;
• corrugated paper green;
• teip tape green;
• toothpick or wooden skewer;
• round candy;
• hot glue;
• threads;
• scissors.

How to make a do-it-yourself crepe paper aster with candy

Prepare crepe paper and whatever you need. For a two-color flower, paper of different tones is required. Cut it into strips 1-1.5 cm wide and 13-15 cm long.

From green corrugated paper, cut out the leaves, arbitrary pointed shape. To fix the candy on a stick, you will need a rectangular piece of corrugated paper of any color, because later it will not be visible.

Wrap the candy in a corrugated paper rectangle and secure the skewer inside with hot glue or ordinary threads.

Twist strips of paper of a lighter color in the center or with a slight offset to lengthen the petal.

Fold the petal over at the twisted point and stretch both layers of crepe paper to form a small indentation. Prepare at least 8 petals of a given color.

Fix three petals on the candy so that the petals close over the candy and hide it. By the way, flowers such as do this. You can attach the petals with both hot glue and thread.

Fasten the remaining petals with the next row.

Now prepare paper petals of a darker color, according to the previously described scheme. You will need at least 14-15 of them. for one flower.

Fix the petals made of colored corrugated paper in two rows with hot glue.

Now glue the prepared green leaves so that they peek out from under the flower.

Decorate the place where the leaves are attached to the base with strips of green paper.

If you want to hide the leg, wrap the teip skewer with green tape. Aster flower made of paper with sweets is ready.

This is what an aster flower looks like made of paper of the same color.

Bright, delicate and beautiful paper flowers of asters look good in sweet bouquets and compositions. How do you like this bouquet?

Or like this? In my opinion, both sweet bouquets are in no way inferior to bouquets of natural flowers! 🙂

A handmade crepe paper and candy aster can be used as a base or as an addition to other types of paper flowers.

print Thanks, great tutorial +1

Flowers decorate our home both outdoors and indoors. However, they fade very quickly. Therefore, we offer you with the help of our detailed lesson make an aster that does not need care and will please you for a long time. The color of the aster can be any. In our case, yellow was chosen.

• Sheets of green paper yellow color
• Stationery glue
• Scissors
• Pencil
• Ruler

Step by step photo lesson:

We take a sheet of yellow paper and start creating the bottom layer of petals. They will be the longest. Their length will be 21 cm, and the height will be only 1 cm. 18 pieces should be cut out of such stripes.

Now we glue them with droplets using clerical glue.

We cut out a circle from yellow paper, the diameter of which will be 3-4 cm. We glue all the petals of the first tier on it.

Now let's move on to the second layer and cut out nine strips of 15 x 1 cm from paper.

We glue them in the form of droplets and let them dry.

We attach nine petals to the center of the aster, which will create the second layer.

You should definitely create a third tier. Therefore, we cut out nine strips 10 x 1 cm.

We glue them in turn in the very center of the flower.

Finally, we will make the last layer of petals. They will be shorter and narrower. To do this, take a sheet of yellow paper and cut out five stripes 6 x 0.5 cm. Glue them in the middle of the flower.

No flower is complete without a leaf. Therefore, we cut out a large sheet of green paper and glue it on the back side.

On this paper aster is ready. So bright and voluminous craft will certainly embellish your home and attract the eyes of every guest.

Fresh flowers are always great. And in winter period time as an alternative, you can use homemade ones. Made especially well look

Bouquet

Autumn flowers, which include asters, have a particularly bright color. But after they bloom, nature begins to fade. In order to keep the warmth and memory of sunny fine days with a variety of autumn colors longer, you can make a bouquet of beautiful paper asters.

For its manufacture you will need:

• bilateral colored paper(pink, purple, orange, yellow, red and green);
• scissors;
• glue;
• wire.

Instruction:

1. Fold a piece of paper in quarters.
2. Cut into small strips, without cutting through to the end of a centimeter and a half.
3. Glue all four strips together.
4. Bend the petals with scissors.
5. From yellow paper, cut a strip 1.5 cm wide and also cut the fringe. These are stamens.
6. Twist a narrow strip and glue. Wind it, gluing it, with a wide strip.
7. From two green ribbons, make a sepal according to the same principle. Twist them into wide strips, gluing.

One paper aster is ready. And so do the others. Put them on stems and put them in a vase. You can admire the bouquet all winter.

Colored paper aster

For manufacturing you will need:

• green corrugated paper;
• wire;
• scissors;
• pencil;
• ruler;
• compass;
• colored paper;
• glue.

Step instruction:

1. Prepare pieces of wire for aster stems.
2. Cut out green leaves.
3. Make strips of green corrugated paper 2 cm wide.
4. Wrap the wire with ribbons of paper, inserting leaves into it.
5. Cut a strip of yellow paper 3 cm wide.
6. Bend it in half and make cuts with a Christmas tree.
7. Roll in a circle, you get stamens.
8. Draw two concentric circles with a common center and radii of 4 and 1.5 cm.
9. Divide the small circle into 16 equal parts, continue the lines until they intersect with the large circle and set aside equal segments on each ray. Connect the resulting points to the middle of 1/16 of the large circle.
10. Cut out the resulting triangles, cut the petals along the rays to a small circle and bend the petals in half. Make 6 such blanks.
11. From green paper, make two of the same parts of a slightly smaller size, this will be the sepal.
12. Glue all parts of the aster, starting with the green ones. To do this, coat the central circle with glue and press the workpiece tightly.
13. Pierce the stem and secure it.
14. Glue the stamens on top, and the paper aster is ready.

Corrugated paper aster

There are several ways to make a beautiful flower called aster. For the specific case under consideration, you will need:

• corrugated paper (green, yellow and purple);
• wire 20 cm;
• scissors;
• glue.

Step-by-step instructions for making paper asters:

1. Cut 2 strips of lilac paper 4 cm wide and one yellow.
2. Fold them several times and make deep cuts: for yellow - often, and for lilac - less often.
3. Cut out green leaves.
4. Wrap the wire with a thin strip of green paper, while winding the leaves. Lubricate with glue for strength. Got a stem.
5. Wrap the yellow strip - stamens tightly on the end of the stalk, smearing the edge with glue.
6. Twist the tips of the petals of the purple stripes inward using scissors or a pencil.
7. Glue the edge of the tape to the stamens 1 cm above the base, bending inward. Do the same with the second lilac strip, gluing its edge to the first.
8. Straighten the middle of the aster so that the yellow stamens can be seen.
9. Cut out petal-shaped sepals from green paper and glue them on the bottom of the flower.

Conclusion

Astra is an amazing flower with a huge colors. Making a composition out of them, it is easy to match it to any interior. This article discusses three ways to make an aster out of paper. Anyone who wants to decorate the house with an autumn bouquet of flowers can use the tips. Such a bouquet will delight you with its colors until next autumn.