Step 1: How to make a carnival mask - Selection of materials

This version of how to make a carnival mask is good because you can change some of the materials to suit your needs and materials.

You will need:

A reliable full face mask can be found in the hobby lobby for $ 4.

White polymer clay (I used a Sculpey III, which sells for $ 9 per brick and can be oven baked).

Acrylic paint (a couple of dollars).

Black + beige, or red, blue, brown and yellow to color the mask to match the skin color + white to color the teeth.

Hood (Optional - a wig can also be covered with covering elastic bands, or a cap, a hat, in general - whatever you want!).

Elastic bands or thin bandages ($ 2-3, photo not in this step.)

Black burlap or other black mesh to cover your eyes. Make sure you can see through this fabric !! However, a very eerie effect can be achieved if your eyes are visible inside this mouth !!! If you make a carnival mask correctly.

Hot glue gun.

Foamed polyethylene foam, thickness 1 "(Optional if making a mask that is incompatible with glasses).

Step 2: Decide on the teeth and their position

I decided to make big, pointed, scary teeth. But maybe you decide to make a set of large human teeth or creepy wolf teeth? Maybe fish teeth?

Whatever you decide, figure out how to make a carnival mask and figure out where to glue the teeth, draw the placement of the teeth on the mask.

Step 3: How to Make a Carnival Mask - Making Teeth

After homogenizing your clay (knead it until soft), roll two equal sized pieces of clay into cones. You should also make sure your teeth are similar in size. Start at the center of the top row of teeth and work the teeth outward, two at a time.

Roll each ball into a long, pointed cone, then bend it into a nice curve. Crush the base of the tooth against the mask to make a flat base for hot glue later. The clay is soft enough that you don't need a massive template.

After all the teeth are done, carefully remove them from the mask and place them side by side on a tray, in the correct order. They should be baked according to the instructions on the clay packet, but I would recommend baking for at least 30 minutes.

After the teeth have cooled down, mark the position of the teeth on the mask. I signed B and H to indicate the top and bottom row, and then the number of the position of the tooth from left to right. Seriously, this has to be done. If you mix them, they all look the same. But everyone will be a little off the base of the mask and you will get confused about how to make a carnival mask.

IMPORTANT: If you are doing this for a child, do not make your teeth sharp !!! They seem soft when you make them, but they become durable and dangerous after firing them.

You will need:
- tulle
- scissors
- ribbon
- black fabric paint
- cling film
- template for the mask.
- glue (moment, super glue, fabric glue)

1. Prepare the mask template using paper and a marker or printer and place it on the table. Cover the template with cling film.

2. Prepare tulle and cut a rectangle about 25 x 13 cm from it.

3. Start tracing the black part of the mask using fabric paint.

4. Let the paint dry and then carefully peel the tulle off the film.

5. Cut out the mask including the eye holes.

6. Prepare a tape and cut 2 pieces from it, each about 50 cm long.

7.Use glue to attach the tapes to the mask. Let the glue dry.

You can make the ribbons shorter. The main thing is that you can tie them freely.

How to make a cat mask

You will need:
- scissors
- lace trim
- glue
- satin ribbon
- small decorative feathers, if desired
1. Cut the lace trim to make two equal pieces.
2. Connect the halves of the tape as shown in the picture. You should get the main part of the mask. Secure with glue in the middle.
3. Cut off unnecessary parts to get the desired shape.
4. Glue the feathers so that they resemble a cat's ears.
5. Prepare a satin ribbon, cut it into two equal halves and glue each piece to the left and right end of the mask.

How to make a Halloween mask

You will need:
- nylon mesh
- lace
- scissors
- ribbon
- Super glue
- sticky aerosol

1. Prepare the mask template first.

2. Place 2 rectangles of nylon mesh and lace on the mask pattern (lace first, mesh on top). Each rectangle measures approximately 25 x 13 cm.
3. Connect the fabrics together using a sticky spray. Place the workpiece under something heavy and wait a little.
4.Use scissors to cut out the mask including the eye holes.

5. Prepare the tape, cut it in half, and glue each half to the mask so you can put it on.

DIY Christmas masks

You will need:
- felt
- artificial flowers
- ribbon
- glue
- sequins.

1. Cut the mask out of felt, after drawing it with a simple pencil. To make it easier to figure out where to cut the holes for the eyes, attach the mask to your face and trace the approximate place with a pencil.

2. Separate the petals from the artificial flowers and glue them to the mask the way you like.

4. Glue or sew the tape to the back of the mask so you can put it on.

DIY paper mask

You will need:
- cardboard
- scissors
- stationery knife
- thread (preferably elastic) or not very wide elastic
- pencils / markers, etc.
- hole punch, if desired

1. Prepare a sheet of heavy paper or cardboard and fold it in half.
2. Use a utility knife to cut out the holes for the eyes.

3. Make holes for thread or elastic using a hole punch or knife.
4. Decorate the mask to your liking. If it's an animal, you can draw a nose, mustache, ears, etc.

How to make a carnival mask

You will need:
- a sample mask (can be found in specialized stores) or cut the mask out of cardboard.
- multi-colored feathers
- rhinestones
- sequins
- Super glue
- toothpick

1. Prepare a sample mask and think about how you want to decorate it.
2. To gently glue the rhinestones, use glue and a toothpick - dip it in the glue and apply to the mask. Glue rhinestones around the eye holes.

3. You can glue rhinestones on the top of the eye hole and apply glitter on the bottom. To do this, apply glue to the bottom and sprinkle glitter on it gently.

4. Also add colored feathers using glue. How many feathers, and where they will be placed, you choose yourself.

5. It remains to add an elastic band or tape to put on the mask and leave the glue to dry.

DIY cardboard mask

You will need:
- cardboard
- scissors
- glue
- leaves of different colors and sizes
- sticks, twigs, seeds, feathers, etc.

1. Cut the mask out of the cardboard
2. Glue the leaves as shown in the image (or choose your option) to make the mask look like an Indian attribute.
3. Start decorating the mask with various details according to your taste, the main thing is not to overdo it and do everything symmetrically.

How to make a mask out of paper. Decorate with paper roses.

You will need:
- a simple papier-mâché or plastic mask (without drawings and patterns), bought in a store or you can cut it yourself from cardboard
- corrugated paper
- glue
- scissors
- feathers, optional

1. You need to cut about 25 strips of corrugated paper. Their length can vary from 25 to 40 cm. Fold each strip in half.

2. To make a rose out of a paper strip, start twisting it as shown in the picture. As the paper curls, turn the strip 180 degrees. To keep the flower in place, you can fix some places with glue.

If you want to know what other flowers can be made from paper, check out our articles:





3. Start gluing the roses to the mask. Add glue to the bottom of each flower.

4. Optionally add decorative feathers.

You can try different colors and types of paper.

DIY masks for children. Animal noses.

You will need:
- carton packaging for eggs
- dye
- brushes
- elastic
- thread and needle
- thick paper
- glue
- scissors

1. Take a container for eggs and cut out the parts with grooves - they will act as noses, which you need to decorate further.
2. To breathe through your nose, make several small holes in the workpiece - use a needle or a stud.

3. Start painting the cardboard nose in the colors of your favorite animal. Draw some details like nostrils, teeth, etc. Look in books or the Internet for what the animals look like for a better mask.
4. Prepare thick paper and cut antennae out of it. Glue them to the workpiece.
5. It remains to sew the elastic so that the nose can be put on.

New Year's masks for children

You will need:
- mask pattern
- fabric (in this example, the color is purple)
- lining fabric (thin fleece);
- lace (in this example, the color is black)
- thread and needle
- scissors
- pins
- velvet ribbon
- decorations.

1. Prepare the base and lining fabrics and cut out the details of the mask using a pattern.

2. If your lace has a seam on both sides, you need to cut the seam on one side.

3. Using pins, attach the lace on the sides of the mask (you need to do this from the wrong side), while making small folds.

4. Now you need to sew the lace to the main part and cut off the excess.

5. Insert velvet ribbon under the lace and secure with pins.

6. Use a sewing machine to stitch the lining fabric to the main part, as well as the eye slots.
7. Decorate the mask to your liking, for example, you can add a small spider or a snowflake.

DIY masks (photo)

DIY Venetian masks

The carnival mask is very simple to make, you can simply cut circles for the eyes out of cardboard, or you can make it very individual and sophisticated.

How to make a carnival mask with your own hands

The base of the mask will be made of papier-mâché. To do this, you will have to sacrifice your face and have a little patience, because the mold for making papier-mâché will be your face, or the face of the person who is making the mask. We want to make an individual mask, right?

First, let's make a paste from flour and water. Cut the newsprint into small squares about 1.5x1.5 cm. Cut the paper napkin into thin strips.

Lubricate your face with a fat cream or petroleum jelly and put newspaper squares on your face along the contour of the mask. Try not to smile at this time. We spread the next layer of newspaper, wetting it in paste. Two more layers of newspaper and a layer of napkins. Next, alternate a layer of newspaper, a layer of napkins. You need to make at least five layers.

When the mask is tight, dry it with a hairdryer, carefully remove it from the face and let it dry.

When the mask is completely dry, cut off excess irregularities and beautifully cut out the eyes. Cover the mask with acrylic paint.

How to decorate a carnival mask

The decoration of the mask should be consistent with the costume in which you will be wearing this mask.

It should be the same color as your suit. The most neutral color for a mask is black.

The mask can be wrapped in lace and decorated with rhinestones. You can glue the mask over with a cloth from your dress, and glue dark sequins around the eyes.

Feathers on one side of the mask will look very nice.

You can decorate the entire mask with artificial flowers or small satin ribbon bows. From the bottom of the mask, you can make a veil and cover your entire face.

If you are making a mask in black, then you can glue light sequins around the eyes.

• Masks depicting animals or characters are made all over the face.
• Do not paint the inside of the mask to avoid unpleasant situations: paint can stain your face or cause allergic irritation.
• If you plan to wear the mask for a long time, then it is better to make the inner part of it from a pleasant linen fabric.
• It is convenient to starch the fabric before making the mask, so it holds its shape better if you decide not to put cardboard inside.

Video materials on the topic of the article

Very detailed master class:

Felt masks:

Venecian mask:

Paper mask:

New Year's holidays, carnivals and masquerades are an opportunity to have a wonderful, fun and bright time. It will be interesting to participate in entertaining costume events for both children and adults. However, for any holiday it is necessary to choose some kind of image, to come up with and create an appropriate costume and its components. You can dress up with anyone, choosing a character to your liking, depending on the theme or direction of the holiday. But the invariable attribute of any masquerade has always been and will be carnival or New Year's masks.

Beautiful masks sometimes do not even require any costume, being a completely independent accessory that is able to convey the idea and meaning of your image. If you want the holiday to be remembered as an interesting event, turn preparation for it into an exciting creative process and create carnival masks with your own hands together with the children.

If you are preparing for a masquerade

Merry festivities have always been unthinkable without masks. Of course, they all differ from each other: for example, Christmas or New Year's masks can symbolize fairy-tale heroes, Vertep participants, themed winter characters, and Halloween carnival masks should already reflect the spirit of this holiday and embody its popular images. If we talk about the Venetian holiday, then there is generally a whole separate art, etc. That is, if you wish, you can learn how to create beautiful and frightening, small and large, simple and complex masks: from papier-mâché, cardboard, fabric, lace or knitted and any others.

Before you make a carnival mask with your own hands, you need to decide on your image and costume. Then she will simply continue and supplement it. If you want to limit yourself to only this accessory, you will have to put in more effort, because in this case it becomes the central and main detail of your image, defining it.

Minimal effort for a bold look

The easiest way to make a simple mask from scrap materials: paper, lace, felt, etc. Such a carnival mask with your own hands can be suitable for both children and adults. By the way, they are not only female, but also male.

Let's dwell on paper and cloth masks for children. If a child cannot decide on the image for the New Year's party in any way, choosing between a tiger, an owlet and a dragon, and you do not know how and what kind of New Year's mask to make, you can fulfill all his desires at once using an absolutely simple manufacturing technology.

1. It is necessary to print (using a color printer) those blanks that you like. It can be a drawing-template of the head of any animal, fairytale character or hero.
2. Next, this drawing needs to be cut out and glued to cardboard (thick paper).
3. The New Year's mask can be held with an elastic band. To attach it, make small cuts on both sides. Then you need to wrap an elastic band around these cuts (calculate its length so that you can easily put on the mask without tearing it, but also so that it does not constantly fall off your face). You can secure the elastic with tape or a stapler. If you want, glue a thin stick instead of an elastic band, for which you can hold the product with your hand.
4. Such a New Year's mask with your own hands will become even more attractive if you decorate it with sparkles, tinsel or other festive paraphernalia.

As easy as making a New Year's mask for a child, it can be made for an adult party too.

• As a blank, you will need to draw or also print a regular outline (they can be both female and male). Draw two blanks at once - from plain paper or cardboard and from very dense.

• Then cut out the blanks. Don't forget the eye slits.

• When everything is ready, glue both blanks.

• Now it's the turn of the decorations. Colored feathers will look very impressive. Try to glue them thickly over the product, and attach sequins and rhinestones around the eye slots.

Black lace masks turn out to be very beautiful and mysterious. Their manufacturing technology is similar to the previous ones.

1. Prepare a regular template (draw or print). Cut it out of cardboard.
2. Take a satin fabric and glue the blank to it. After the glue is dry, carefully cut.
3. Next, start glueing the lace, slowly cutting off all the excess. The mask must be completely covered with lace. If small gaps remain, use black nail polish to close them.
4. Then the lace product can be decorated with sequins, rhinestones and sparkles, and you can also attach a stick or an elastic band to it.

A lacy black mask can only be made of lace, however, for this you need to find tight lace that would hold its shape. Then you will have to work a little with the joining of parts and bends, gluing all the elements or stitching them together, and at the end - decorate the product.

Felt masks are also cut out of paper blanks.

If for the sake of the image you are ready for anything ...

Much more effort will be needed if you want to make a three-dimensional product out of papier-mâché. You can model it on a plasticine model. Despite some laboriousness of this manufacturing process, the masks are very beautiful, spectacular and more durable. Plus, you can give the accessory the exact shape you want.