Crocheted women's sweaters with patterns. Openwork blouses crochet patterns and description (photo)

For spring warmth, you will want to crochet a light blouse. Two openwork crochet blouses with diagrams and descriptions, as well as photos of models, make it possible to understand the process and knit one of them or both at once.

Both blouses are knitted from cotton, but if there is a good quality soft wool mixture, then it may well be used in work. The first sleeveless blouse is suitable as office casual wear. The second light tunic is less formal and more romantic.

Openwork blouse with spider pattern

Required for size 44-46:

  1. cotton - about 200 gr. (YarnArt Summer, 70% cotton, 30% viscose, 100 g = 350 m);
  2. hook number 3;
  3. knitting needles on fishing line number 3.

Designations:

  • sc - single crochet;
  • ssn - double crochet;
  • vp - air loop;

Description of knitting

We collect a chain of 187 ch

Link 11 horizontal rapports of the Spider pattern according to scheme 1 (at the rate of 17 ch for each rapport).

If you need a more fitted silhouette, then 10 rapports can be knitted for size 44. The Spider pattern, due to the large number of chains from the VP, stretches well in all directions.

It is best to knit an even number of rapports - in this case, the product is easier to divide into equal front and back and form armholes and a neckline.

Knitting and armhole shaping

To do this, you need to move from knitting in a circle to knitting in straight and reverse rows. First you will need to finish the back of the sleeveless jacket, and then the front.

To form the correct line of the sleeve cutout, I recommend focusing on a pattern drawn up in advance or on the finished product. In addition, a sleeveless jacket can be tried on in the process of knitting and forming a sleeve cutout.

Back

We knit the back straight, that is, without deepening the neckline. At a height of 8.5 rapports from the beginning of knitting, cut the working thread, leaving the end of the thread 30-40 cm long. This thread is useful for connecting the shoulder seams.

Before

Go to the knitting of the front and, having knitted another vertical rapport of the Spider pattern, proceed to the formation of the neckline.

To do this, you need to separately knit the right and left shoulder parts in front. It is necessary to knit until the height of the sleeveless jacket from the beginning of knitting reaches - 8.5 rapports.

Assembly

Connect the shoulder seams with a crochet by knitting a series of connecting loops, or sew with a needle.

Tie the edge of the neckline and cutout of the sleeves according to the pattern.

strapping

On the bottom edge of the sleeveless jacket, crochet loops and transfer them to circular knitting needles. I got 144 loops.

Mid-thigh tunic

  • Yarn: YarnArt sophist, Turkey, 50/50 PAM/viscose 100g/400m.
    consumption of 2 skeins of yarn
  • Hook №2.5

Scheme


Schema changes

Instead of five s / n connected fan (3 tbsp. s / n, 2 air., 3 tbsp. s / n)
Added one more row for evenness and openwork: after the row was tied with st. with 2n, we knit another row: a fan, 2 air. p., Art. b / n in the first arch of 3 air. p., 4 air. p., Art. b / n in the second arch of 3 air. p., 4 air. p., Art. b / n in the third arch of 3 air. p., 2 air. etc., etc.

Ribbed neckline and sleeve additions

The models are taken from the web. Many thanks to those who connected them and laid them out for us with diagrams and descriptions. It remains only to pick up a hook and knit a lovely blouse or tunic for spring.

If someone has additions or has in mind cute models of openwork blouses with diagrams and descriptions, please share. We all want to be beautiful in spring, especially since we know how to make these beautiful things ourselves. Lungs and loops and creative mood, dear guests of the Web Home Economics site.

Recently, I have been delighted with crocheted clothing designers. There are a lot of beautiful and fashionable female models for all ages. After all, many people have a stereotype that crocheted clothes are only for middle-aged women and babies. And to be honest, the same type of models with openwork patterns or motifs are already fed up with everyone. The site *Fashionable knitting at Peppercorn* will try to convince you of this and offer you fashionable, stylish and elegant models that you will knit and wear with pleasure.

Jumper with knitted belt

Fitted jumper with a square neckline, cuffed sleeves and a striking knitted belt.

DIMENSIONS

36/38 (40/42) 44/46

YOU WILL NEED

Yarn (70% cotton, 30% polyamide; 90 m / 50 g) - 650 (700) 750 g light gray, hook No. 7; circular knitting needles No. 6; knitting needles No. 8; belt buckle.

RELIEF PATTERN

Rows in the forward and reverse direction (hook number 7): an odd number of loops. Knit according to scheme 1. Start with loops before rapport, repeat rapport constantly, finish with loops after rapport. From the 1st to the 5th row, knit 1 time, then 2-5th rows constantly repeat.

ELASTIC

Knit (needles No. 6): after a set of loops, start with 1 purl row: hem, * 1 front, 2 purl, 1 front, from * constantly repeat, hem. In the front rows, knit all the loops according to the pattern.

WOVEN PATTERN

Knit (needles No. 8): an odd number of loops.
Persons p .: hem, 1 front, * 1 p. remove as purl (thread in front of the loop), 1 front, from * constantly repeat, hem.
Out. p .: hem, 1 p. remove as purl (thread behind the loop), * 1 purl, 1 p. remove as purl, from * constantly repeat, edge.
Attention!
Edge bands should be performed in the form of a nodular edge, for this, at the beginning of each row, remove the edge bands as facial ones, at the end of the row knit them with facial ones.

KNITTING DENSITY

11 p. x 10.5 p. = 10 x 10 cm, connected with a relief pattern;
24 p. = 10 cm, tied with an elastic band;
13 p. \u003d 6 cm, connected with a woven pattern.

BACK

Run the initial chain of 53 (57) 61 ch. + 3 v.p. lifting and knit in relief pattern.
For side bevels after 18 cm = 19 p. from the initial row on both sides add 1 x 1 p., then 3 times in each 8th p. add 1 p. = 61 (65) 69 p.
After 61 cm = 64 p. (63 cm = 66 p.) 65 cm = 68 p. from the bar to finish the job. The middle 33 points form the neck, the outer 14 (16) 18 points belong to the shoulders.

BEFORE

Knit in the same way as the back, but with a neckline. To do this, after 55 cm = 58 p. (57 cm = 60 R.) 59 cm = 62 R. from the initial row, leave the middle 29 p. untied and finish both sides separately.
To round the neckline along the inner edge, reduce 2 times in each 2nd p. 1 p each. The remaining 14 (16) 18 p. shoulders finish at the height of the back.

SLEEVES

Run the initial chain of 35 (39) 43 ch. + 3 v.p. lifting and knit in relief pattern. For bevels of the sleeves, starting from the initial row, add on both sides according to the pattern 3 (4) 4 times in each 2nd p. 1 p. = 41 (47) 51 p.
After 9.5 cm = 10 p. (11.5 cm = 12 p.) 11.5 cm = 12 p. from the initial row to finish the work.

BELT

On knitting needles No. 6, dial 13 p. And tie 1 purl row with purl loops.
Then change to needle size 8 and knit in a woven pattern.
After 130 (138) 146 cm, close all loops. Pass the inlaid edge through the buckle, stretching out a section of the belt approx. 2 cm, and sew on the wrong side.

BELT LOOP (4 PIECE)

Make 3 ch. + 1 v.p. lifting and knit as follows: 1 tbsp. b / n in the 3rd v.p. from the hook, 1 tbsp. b / n in the 1st ch, * 1 ch lifting, 1 tbsp. b / n, 1 tbsp. b / n in v.p. lifting the previous row, from * constantly repeat. Having knitted 9 cm, finish the work.

ASSEMBLY

On the lower edges of the sleeves, dial 62 (66) 70 sts on the needles and knit with an elastic band for the tucked strap.
To expand the bar, starting from a set of loops, add on both sides according to the pattern 2 times in each 8th p. 1 p. = 66 (70) 74 p. After 12 cm = 29 p. from a set of loops, close all loops according to the drawing.
Run shoulder seams.
Crochet the neck with 1 round next to st. b / n and 1 circular row of “crustacean step” (= st. b / n knit from left to right).
Run the side seams and the seams of the sleeves, while the lower 6 cm of the strips of the sleeves are sewn on the front side.
Sew sleeves according to the pattern.
Bend the sleeve strips halfway to the front side and sew with a few stitches.
Sew belt loops at waist height (after trying on) to the front and back on both sides from the middle 18 (20) 22 cm. Thread the belt.

Asymmetrical lace pullover

An interesting pullover with a combination of simple patterns and an asymmetric bottom line looks very impressive, but it fits quite simply.

DIMENSIONS

36/38 (40/42) 44/46

YOU WILL NEED

Yarn (78% acetate, 12% polyester, 10% polyamide; 150 m / 50 g) - 400 (450) 500 g blue-black; hook number 3.

GRID PATTERN

The number of loops is a multiple of 3 + 1 p. + 1 ch. lift.
Knit according to scheme 1. Start each row, as shown in the diagram, 4 ch. lifting for the 1st tbsp. with 2 / n and loops before rapport, then constantly repeat rapport and finish with loops after rapport.
In height, constantly repeat the 1st and 2nd rows.

FANTASY PATTERNS A AND B

The number of loops is a multiple of 12 + 1 (7) 1 p + 1 ch. lift.
Knit according to scheme 2 or 3. Start each row, as shown in the diagram, 1 additional ch. lifting or 4 v.p. lifting for the 1st tbsp. with 2 / n and loops before rapport, then constantly repeat rapport, finish with loops after rapport.
In height, perform the 1-9th rows 1 time, then constantly repeat the 2-9th rows.

KNITTING DENSITY

25 p. x 7 p. \u003d 10 x 10 cm, connected with the "Lattice" pattern;
25 p. x 15 p. = 10 x 10 cm, Art. b / n and fantasy patterns.

BACK

Run a chain of 112 (127) 136 ch. + 1 v.p. lift, first knit 1 row of st. b/n. This series is not taken into account in further calculations. Continue knitting with the Lattice pattern.
After 60 cm = 42 rows (61.5 cm = 43 rows) 63 cm = 44 rows from the typesetting row, finish the work.

BEFORE

Knitted in two separate pieces. First, for the right side (on the finished product), complete a chain of 85 (91) 97 ch. + 1 v.p. lift and knit 1 row of st. b/n. This series is not taken into account in further calculations.
Next, knit a fantasy pattern A (B) A.
After 22 cm = 33 rows from the set row, continue to knit with the “Lattice” pattern, while starting 1 next to st. b / n, as shown in diagrams 2 (3) 2 (= 10th row of the diagram).
After 43 cm = 49 rows from the set row, knit 1 row of st. b / n, then knit a fantasy pattern again, while starting with the 1st row according to the scheme 2 (3) 2.
To cut the neck after 52 cm = 62 rows from the typesetting row along the right working edge, close 13 (15) 16 cm and then close in each 2nd row another 2 x 3 cm.
To do this, perform so many connections. Art., how much is necessary to secure the item for the specified width. At the height of the back, finish the work.
Now, for the left side (on the finished product), complete a chain of 43 (49) 55 ch. + 1 v.p. lift and knit 1 row of st. b / n and then continue knitting with the “Lattice” pattern.
After 16 cm = 11 rows from the set row, knit 1 row of st. b/n.
Next, knit a fantasy pattern B (A) B, while starting with the 1st row.
After 33.5 cm = 37 rows from the typesetting row, knit the “Lattice” pattern again, while starting with one row of st. b / n, as shown in scheme 3 (2) 3.
To cut the neck after 42 cm = 44 rows from the typesetting row along the left working edge at the beginning of the purl row, close 1.5 (2.5) 3 cm and in each next 2nd row 1 x 1 (2) 2.5 cm, while doing so many connections. Art., how much is required to secure the loops for the specified width.
After 50 cm = 50 rows (51.5 cm = 51 rows) 53 cm = 52 rows from the typesetting row, finish the work.

SLEEVES

Run a chain of 61 (67) 70 ch. + 1 v.p. lift and first knit 1 row of st. b/n. This series is not taken into account in further calculations. Continue knitting with the Lattice pattern.
For sleeve bevels, after 5.5 cm = 4 rows from the cast-on row on both sides, add in each 6th row 1 repeat (= 3 p.) = 91 (97) 100 p.
After 53 cm = 37 rows from the typesetting row, finish the work.

ASSEMBLY

Fold the two necklines accordingly and sew the parts of the front.
Run shoulder seams. Sew on the sleeves, complete the side seams and the seams of the sleeves.
Tie the neckline 1 circle. Art. b/n.

Jacket with openwork back

A graceful button-down jacket with mesh on the back and shoulders is not only a trendy new thing, but also a real pleasure for the hottest days.


DIMENSIONS

34/36 (38/40) 42/44 (46/48) 50/52

YOU WILL NEED

Yarn Phildar Detente (93% acrylic, 7% elastane; 144 m / 50 g) - 7 (8) 8 (9) 10 skeins of mother-of-pearl (PERLE); hook number 2 and 2.5; stitch markers; 7 buttons with a diameter of 15 mm.

FANTASY PATTERN

The number of loops of the initial row is a multiple of 11 + 12.
1st p.: ch 3 instead of 1 st. s / n, * 1 tbsp. s / n, ch 11, skip 8 p., 1 tbsp. s / n, 1 ch, skip 1 p. *, repeat from * to *, then 1 tbsp. s / n, ch 11, skip 8 p. and 2 tbsp. s / n.
2nd row: ch 3 instead of 1 st. s / n and 1 tbsp. s / n in the arch (= 2 tbsp. s / n, tied together), * tie 6 tbsp. s / n, 2 vp, 1 tbsp. s / n, 2 vp and 6 st. s / n, 3 tbsp. s / n, tied together by inserting a hook into the same arch for the 1st tbsp. s / n, in vp for the 2nd st. s / n and in the next arch for the 3rd tbsp. s / n *, repeat from * to *; in the arch tie 6 tbsp. s / n, 2 vp, 1 tbsp. s / n, 2 vp and 6 st. s / n, then finish 2 tbsp. s / n, tied together by inserting the hook first into the arch, then into the 3rd ch. the previous row.
3rd row: ch 6 instead of 1 st. from 6 / n, 6 vp, 1 tbsp. s / n in the arch of 2 vp, * 1 vp, 1 tbsp. s / n in the next arch of 2 ch, 11 ch, 1 tbsp. s / n in the next arch of 2 ch *, repeat from * to *, 1 ch, 1 tbsp. s / n in the next arch of 2 ch, 6 ch, 1 tbsp. from 6 / n to the 3rd v.p. the beginning of the previous row.
4th row: ch 3 instead of 1 st. s / n and 1 tbsp. s / n, introducing a hook into the arch of 6 ch. (= 2 tbsp. s / n, tied together), 2 vp, 6 tbsp. s / n in the arch, 3 tbsp. s / n, connected together, introducing a hook into the arch of 6 ch. for the 1st st. s / n, then in v.p. for the 2nd st. s / n and in the next arch for the 3rd tbsp. s / n, * in the arch of 11 vp tie 6 tbsp. s / n, 2 vp, 1 tbsp. s / n, 2 vp and 6 st. s / n, 3 tbsp. s / n, connected together, introducing a hook into the same arch for the 1st tbsp. s / n, then in v.p. for the 2nd st. s / n and in the next arch for the 3rd tbsp. s / n *, repeat from * to *, 6 tbsp. s / n in the arch of 6 ch, 2 ch, finish 2 tbsp. s / n, tied together, introducing the hook into the arch, then into the 6th ch. the previous row.
5th row: ch 3 instead of 1 st. s / n, 1 tbsp. s / n in the arch of 2 vp, * 11 vp, 1 tbsp. s / n in the next arch of 2 ch, 1 ch, 1 tbsp. s / n in the next arch of 2 ch *, repeat from * to *, 11 ch, 1 tbsp. s / n to the next arch from 2 vp and 1 tbsp. s / n in the 3rd vp the beginning of the previous row.
Run from the 1st to the 5th p., Then constantly repeat from the 2nd to the 5th p. = 4 p.

KNITTING DENSITY

27 p. x 17 p. = 10 x 10 cm, connected with a pattern from art. s / n (hook No. 2.5);
4 rapports x 8 p. = 14 x 9 cm, connected with a fantasy pattern (hook No. 2).

BACK

Crochet No. 2, complete a chain of 133 (144) 155 (166) 188 ch, tie 1 p. Art. s / n, then knit with a fantasy pattern = 12 (13) 14 (15) 17 rapports.
In the 29th r. fantasy pattern, replace on both sides an arch of 11 vp. arch of 8 v.p.
In the 30th p. replace on both sides 2 tbsp. s / n, connected together, for 2 tbsp. s / n and tie 8 tbsp. s / n in the arch of 8 p.
For armholes through 34.5 cm = 31 p. from the initial row, skip 1 rapport on both sides = 10 (11) 12 (13) 15 rapports.
In 47 (49) 51 (53) 53rd p. fantasy pattern replace 5 arches from 11 vp. in the center of the canvas on arches of 8 v.p. In 48 (50) 52 (54) 54th p. tie 8 tbsp. s / n in each of 5 arches from 8 v.p.
For neckline through 54.5 (56.5) 58.5 (60.5) 60.5 cm = 49 (51) 53 (55) 55 p. from the initial row, skip the middle 6 rapports = 5 arches from 8 ch. and ½ rapport on both sides of these 5 arches.
Next, knit each side of the front yoke separately = 2 (2.5) 3 (3.5) 4 rapports.
Through 63.5 (65.5) 67.5 (69.5) 69.5 cm = 57 (59) 61 (63) 63 p. from the initial row, knit the last row with a fantasy pattern and finish the work as follows: knit 1 tbsp. b / n in 2 tbsp. s / n, connected together, in an arch of 2 ch. and in Art. s / n between arches from 2 ch, replace arches from 11 ch arches from 8 vp, and arches from 6 vp. and ½ rapport on both sides with arches of 4 ch.

RIGHT SHELF

Crochet No. 2.5, complete a chain of 64 (68) 73 (79) 87 p. and knit st. s / n (each row from st. s / n starts with ch 3 instead of the 1st st. s / n).
For armholes through 34.5 cm = 58 p. from the initial row, skip from the left working edge 1 x 15 p. = 49 (53) 58 (64) 72 p.
For neckline through 38.5 (40.5) 42.5 (44.5) 44.5 cm = 65 (69) 72 (75) 75 p. from the initial row, leave from the right working edge in each next row 1 x 6 p., 1 x 4 p., 2 x 3 p., 3 x 2 p., then in each next row perform 4 x 1 decrease (= 2 st s / n, connected together) = 23 (27) 32 (38) 46 p.
To reduce 6 sts: at the beginning of the row, replace them with 2 connections. st., 2 st. b / n and 2 p / st., then at the end of the row, knit in reverse order, next. knit them in a row. Art.
To reduce 4 sts: at the beginning of the row, replace them with 2 tbsp. b / n and 2 p / st., then at the end of the row, knit in reverse order, next. knit them in a row. Art.
To decrease 2 or 3 sts: at the beginning of the row, replace them with 1 or 2 tbsp. b / n and 2 p / st., then at the end of the row, knit in reverse order, next. knit them in a row. Art.
Through 45.5 (47.5) 49.5 (51.5) 51.5 cm = 77 (81) 84 (87) 87 p. from the initial row to finish the job.
Left shelf knit symmetrically.

SLEEVES

Crochet No. 2.5 to complete a chain of 91 (101) 111 (121) 121 ch. and knit st. s / n (each row from st. s / n starts with ch 3 instead of the 1st st. s / n).
Run on both sides in each next 3rd p. 7 x 1 increase and after 2 p. 1 x 1 increase (= 2 st. s / n in chrome st. s / n) = 107 (117) 127 (137) 137 p.
After 14 cm = 24 p. from the initial row, mark with a marker or thread of a contrasting chrome color. at both sides.
After 18.5 cm = 31 p. from the initial row to finish the job.
Knit the second sleeve in the same way.

ASSEMBLY

Run side seams. Unscrew the top of the back and sew the yoke to the upper edge of the shelves. Sew on the sleeves by connecting the marks on the sleeves with the corner of the armhole of the main part.
Tie 2 p. Art. b / n sides of the shelves and neckline, while on the right shelf make 7 holes for buttons from 3 ch. at an equal distance from each other.
Sew on buttons opposite the holes.

Women's tops and openwork blouses are the highlights of the wardrobe. Usually there are a lot of these things and it is they that allow you to be always different. Often they are bright, attracting attention. They form the perfect combination with all the basic elements of clothing: trousers, jackets, skirts. Do you love tops and blouses, but there is nothing in stores that suits your style? Want even more variety? In this case, our site will become your guide to the world of beauty.

How can our site help in knitting tops and attractive openwork blouses?

Here you will find patterns that will help you knit these things with knitting needles or crochet. The catalog contains a wide variety of models that differ in style, color. Women who love bright colors will be able to find women's tops that incorporate the most juicy tones. Ladies who prefer coquetry and lightness will be able to pick up women's openwork blouses, both attractive and restrained.

Our models have different patterns, cuts. Some are tight fitting, while others are loose. Craftswomen who have been knitting for a long time will be able to find patterns that allow you to get a real work of art, which will be appreciated by a person far from knitting. Beginning girls who have recently taken up the knitting needles will appreciate the easy schemes that will allow you to practice and knit the desired thing.

Real needlewomen probably know such an activity as crocheting for women - fashionable models of 2015 with a description have long been waiting for your creative experiments. because you can crochet not only warm winter things, but also light summer products that will look elegant and exclusive. We invite you to familiarize yourself with the knitting process elegant summer blouses and dresses that you can wear for a special occasion.

In the summer, you especially want to look beautiful and stylish. And what else looks so elegant and unique as knitted exclusive items created by yourself! If you crochet for the summer, a lot of patterns and patterns open before you, just unlimited space for imagination! These are all kinds of patterns imitating lace, and incredibly beautiful fillet knitting which gives a feeling of lightness and weightlessness to each product. In summer, you can experiment with patterns, colors and textures and create truly unique pieces. With the help of a hook and yarn, you can make almost anything:

  • the dress;
  • sundress;
  • summer top;
  • jacket;
  • cardigan;
  • and even a bathing suit.

Crochet summer blouses for women: models of the season 2016

In summer, it is necessary to protect the skin in the same way as at any other time of the year. But only from the sun and overheating. Ideal in this case would be light openwork blouses, which you can knit yourself using natural yarn and, of course, all your skill and imagination. Today, needlework, including crochet, is at the peak of popularity - the schemes and descriptions of summer blouses for women are truly exclusive. We invite you to familiarize yourself with the patterns of knitting summer tops, blouses and tunics.

Like this openwork blouse will become your favorite outfit on cool summer days.


An openwork top is a great option for pairing with denim shorts.

And this is just an amazing cape for a swimsuit - very stylish.


Lace summer pullover- delicate and alluring outfit.

And this is an unusual T-shirt with a beautiful trim at the bottom.

The knitting technique of the product itself, as well as flowers for decoration, their motives can be seen in the diagram.

Crochet summer top: a detailed master class for beginners

And we want to acquaint our craftswomen with a detailed description of the process of knitting a summer top with a cup. This open version will show others your bronze tan and attractive forms.


1. We take thin yarn.

2. We start knitting with a cup. We knit according to the scheme and get the first cup.


3. We make a lining for a cup of knitwear and sew it to a knitted base.


4. We select the insert foam cup in shape and size.

5. Sew the insert to the knitted cup.


6. In a similar pattern, we knit the second part of the bodice and connect 2 cups together.


7. We connect the cups of the top on the sides with a chain of air loops. We knit the same loops along the lower edge of the bodice.


8. We carry out a pattern according to the scheme.


9. We knitted the top of the top. It turns out very nice, this option can even leave as a swimsuit.

10. We continue to knit according to the pattern.


11. We need to tie a white (or other) ribbon. And stretch it under the bottom of the bodice.

12. Make small bells at the ends of the braid. So she will have a more complete look.


13. We process the upper part of the back and cups of the top with a white border. To do this, we knit 2 columns without a crochet and a pico of three air loops.


14. Between the cups we also stretch a braid resembling a corset.

15. With a single crochet, we knit a strap on which our bodice will be attached.

16. This is such a nice appearance that the finished product will have.


Knitted variety for summer: fashion models of 2016

In summer, not only T-shirts and tops are relevant. You can knit all kinds of tunics, boleros, dresses, sundresses for your summer wardrobe. Knitwear is extraordinarily fashionable this season. BUT light, elongated models that are so relevant in 2016, ideal for obese women who want to hide their flaws and emphasize their dignity.

Here is such a delicate tunic, consisting of separate square motifs, will decorate your summer outfit.

In summer, sometimes you want to wear your favorite jeans, and an openwork elongated tunic with a simple pattern will suit them.


Here is such a lace beauty that you can crochet, study the knitting pattern.

Try knit a light weightless tunic and you will become a real queen of the beach.


As you have noticed, openwork compositions are now at the peak of popularity. We invite you to create several products using similar motifs from the diagram. So you will not hesitate for a long time between knitting a vest, cardigan or sweater, but you will create all these products in turn (or at the same time), because the pattern is almost the same. And even if in the course of work you suddenly change your mind which of these masterpieces should be knitted in the first place, it's okay. You will definitely have a great outfit, as in one of the photos.



How to crochet a summer dress: a detailed diagram for beginners

In summer, the most popular outfit is a dress. Here is such a delightful option, we offer you to knit with your own hands. This dress can be worn on the beach, at a party or just for a walk along the warm coast.

Prepare everything you need for work:

  • 450 g of yarn (according to the composition, you can take 70% cotton for 30% polyamide);
  • hooks size 3.5; 4; and 4.5.

Pattern We will knit according to scheme No. 1. We start with the loops that are in front of the rapport and repeat the loops of the rapport. At the end, we knit the loops that come after the rapport.

We knit the mesh according to scheme No. 2. We repeat the knitting of the first and second row.

The density of knitting is determined as follows:

  • pattern (let's call it "shells") 19, 5 loops and 7 rows we knit with crochet No. 3.5 - (10 x 10 cm);
  • “Shells” - we knit 14 loops and knit 6 rows with crochet No. 4.5;
  • mesh - 19 loops and 11 rows we knit with a crochet No. 3.5.

The front of the dress(its lower region) is knitted from top to bottom, bevels on the sides will be formed due to the different thickness of the hook. The top of the dress is knitted from bottom to top. Pay attention to the location of the arrows on the pattern.

The lower part of the dress on the back is knitted with crochet No. 3.5. We make a chain consisting of 85 air loops and knit a pattern. After we get 23 cm of knitting, we switch to hook No. 4, and after 50 cm we take hook No. 4.5. After we knit 62 cm, we finish work 5 next to the pattern.

Upper part of the dress on the back: we knit the upper edge with a crochet No. 3.5 cm, dialing 86 loops. And then we knit with a net. When we knit 5 cm, we leave armholes for sleeves (9 cm) on both sides. Having knitted 19 cm, we leave 40 loops in the middle for the neck. And on the sides we knit 3 cm with a mesh. We complete the work.

The bottom and top of the dress in front. We knit in the same way as the back, but knit the upper part of the front 11 cm, and then close 40 loops in the middle, and knit 11 cm on the sides.

Sleeves. We take a 3.5 cm hook and cast on a chain of 50 loops. We knit 1 row with a single crochet. After that we knit with a net. To form the bevels, we add on each side 3 times one loop through the row. Then we add loops in each row. We knit 15 cm and complete the work.

We assemble the product. Sew along the shoulder line. We tie the neck with a crochet No. 3.5 using a connecting post (1 row). We sew the product along the line of the sleeves and on the sides.

Video tutorials: crochet fashion models 2016

Try to make yourself a gift and crochet an openwork sweater, which will be made of motifs. This is an interesting technique for everyone, which will help to understand the scheme, to study it thoroughly. It is suitable for any figure, because the pattern perfectly hides all the flaws of the figure.

Getting Started

For work you will need: mercerized cotton yarn 50 g per 240 m - only 350 g, as well as hook number 2.

In the process of creation, we will make hexagonal motifs.

Let's get to the product.

The main rule is that the diameter of the pattern is 18-19 cm. We will start all the work from the bottom. First you need to make 10 motives, working according to scheme 5.1. There will be six petals that need to be gradually connected into a ring, the picture shows with arrows where and how to do this. This blouse is suitable for women with different body types.

Thus, 2 rows from the bottom will be done. Let us turn to the more abbreviated scheme 5.3. - there are two motives that are adjacent to the sides of the neckline itself. We will get the front top.

Tip - connect all the finished elements when working with the last one next.

Then we move on to 7 motives, where there will be 5 petals. For this there is a scheme 5.2. Next, we create four elements for the sleeves and three for the back of the product. Then we connect all three on the back, tying up all the past motives, and then we connect them in the last row with the front abbreviated ones.

This is how the short sleeves will be connected to the armhole line. Now you need to fill in all the gaps that remain between the elements. To do this, you need scheme 5.4, we will gradually connect everything, as in the last row of the product.

It remains to do the most difficult work - to assemble the entire product. This will be a little more difficult for beginners.

The neckline needs to be tied with two single crochet columns, slightly planted, as if to make the cutout on the back a little smaller. Now you need to wash the entire canvas and steam it.

Bright, summer, unforgettable blouse, which will be the highlight of any look! It is enough to work a little and such an ideal product will hang in the closet. In the master class, gray-blue color, but the craftswoman can choose as she wishes. There will be convex flowers on knitting, and it is best to use section-dyed yarn to make it look more original.

You need a description to understand the whole work.

So what do you need. A total of 150 g of section dye in blue yarn, gray yarn, preferably consisting of 55% cotton and 45% acrylic. The hook is better to use No. 2 and a sewing needle. We also need diagrams.

There will be several elements in total, which we will consider step by step.

The first big element is the 10-1 shemka for work. Knitting should be started from the center to the circle. Measure the product during operation. The diameter should be 25 cm. The middle element should be done in 10-2, starting from the 1st to the 7th rows. Knitting also - from the center to the circle. Work diameter 14 cm.

Element small No. 1 is picture 10-2, knitting from 1 to 5 rows. We work from the center to the circle, the dimension is 11 cm.

We carry out the small element No. 2. The same scheme as above. Only knitting goes from 1 to 4 rows, 8 cm.

Create an element "flower" - picture 10-3. Petals will be placed in tiers, knitting from the center. The diameter should be about 12 cm.

Let's get acquainted with the "chaotic" knitting. For this we use gray yarn. It will be needed in order to mask large holes between all the elements. Usually this is an arch, consisting of different options - air loops, connecting columns, single crochet and double crochet. Of course, it depends on the size of the holes. The canvas should be smooth, strong and uniform.

We start to work. All important components of the work are painted in pictures 10-1 and 10-2. Work with blue yarn or make up with gray yarn. Then connect all the elements into one product, knitting the pattern that was discussed above. So fill all the gaps between the elements. It's called Irish lace, such a special technique.

By the way, such knitting can be done on a round yoke.

In order for the product to turn out to be of high quality, you need to know a few rules. First, work with patterns so that there are even details and all the seams can be taken into account, you could make adjustments, etc. Then come up with a good plot for the composition, which will consist of different elements. Work on the sketches so that all the seams and lines are even.

Do not forget to measure your parameters well so that the details are exactly according to them. Link the required number of all elements. Then lay them out on the pattern inside out from above, pinning. Sew all the elements with a thread. Combine them into one product, remembering to use a "chaotic" grid in the right places. We remove the finished craft from the patterns. The neckline, edges and armhole must be tied with blue yarn according to scheme 10.4.

Video on the topic of the article

Watch video tutorials to get inspired and experience the creation process.