Hello everyone. In the midst of a hot summer, you suddenly realize that there are still a couple of summer dresses missing. Let's try to sew a dress without a pattern quickly.

Exclusive Outfit

If you decide to sew a dress with your own hands, then you can give free rein to your imagination by inventing something that you will not find on any girl.

Let's get down to business!

First, we will sew a straight dress. You will need two lengths of knitted fabric. If the material does not crumble, the sleeves and neck can be left untreated, the bottom can be bent.

The length of this model can be any.

party outfit

You were invited to a party, but there is no new outfit. In 2 hours you will update your wardrobe by sewing a wonderful stretch fabric evening dress without using a pattern.

The most elegant outfit has always been considered a little black dress.

1. Take 1 meter of matter, fold in half.
2. Put on a T-shirt with wide shoulders.
3. Outline the top, then from the waist line, set aside the desired length.
4. Then cut out, stitch the side and shoulder seams.
5. If the neck is small, increase its size.
6. Next we sew the sleeves. We cut out 2 rectangles, making a width that corresponds to the circumference of the arm in the widest place, and the length can be taken as desired - 45-60 cm.
7. Attach the rectangles to the shelves and cut along the line of the armhole.
8. Now the resulting sleeves need to be sewn on.

Following the description, you will get a great outfit for the evening.

Festive dress in 15 minutes

1. Take the stretch material: length - 160 cm, width - 140 cm.
2. Fold in 4 layers. Measure around just below the waist. Round off the edges.
3. From the middle, measure a quarter of the measurement, draw a line up 60 cm.
4. Sew very evenly.
5. Cut out the neck, 40 cm long, 4 cm deep. The outfit is ready!

Let's go on vacation!

If you are planning a vacation at sea, then a beach dress is an indispensable attribute of a summer holiday.

Let's try to sew some beach outfits.

Drawstring dress without a pattern

We draw a rectangle, the width and length of which will depend on the desired dimensions. The shelf and back of the product will be the same. The shelf can be decorated with embroidery or beads, so as not to be confused.

With drape

We take a thin flowing matter. It can be satin, silk, muslin, crepe. The product will have only one seam on the back.

• The length of the rectangle is 2-3 meters (it all depends on your size and on the “thickness” of the folds).
• In the center of the rectangle we make an incision to the depth of the neckline: 5-10 cm.
• We make out the upper edge as a drawstring, into which we insert 2 ribbons. At the back, the ends of the ribbons are sewn into the seam on the back, and in front we bring it out of the drawstring into a slit and, when putting on the product, we tie it at the back of the neck.
• Tie a ribbon under the bust.

Light sundress

Take a T-shirt, attach it to the fabric and do everything as shown in the picture.

Dress to the floor

The long one is sewn very quickly, but it looks - charming!

How to sew:

1. You will need fabrics: two lengths from the shoulders to the waist with a width of 140 cm, plus 10 cm for the hem. Waist to floor length for petite ladies.
2. For the top, take a rectangle, fold in half. You will get a length from shoulders to waist plus 10 cm, cut.
3. Set aside from the edge to the width of the sleeve - 25 cm.
4. We set aside 45 cm from the bottom up. Between the sleeves we measure the width of the hips plus 10-12 cm for freedom of movement.
5. You cut. You will immediately get sleeves and a shelf.
6. We sew the side seams and where the cut for the sleeves was made.
7. We tuck the top by 10 cm. We sew it for an elastic band, leaving a small frill. Insert rubber band.
8. We also turn the sleeves up by 10 cm. We sew for an elastic band. Insert rubber band.
9. We sew a rectangle for a skirt, we make folds or gathers at the belt.
10. Sew on top and skirt.
11. We decorate the waist with a wide belt.

This pattern will make a great summer blouse.

How to quickly sew a homemade dress without a pattern

Home dress should be comfortable and beautiful.

1. Fold the fabric in half, attach the shirt.
2. Circle the top of the shirt to the waist, then gradually begin to add. Don't forget to leave seam allowances.
3. Cut out and sew the shoulder and side seams.
4. Bend, turn the neck and sleeves.
5. For convenience, pockets can be sewn on.

No one will have such a thing

We will make measurements for sewing a tunic:

1. Tunic length.
2. Product width (hip circumference + 5-10 cm for freedom).
3. Sleeve width (arm circumference + 5-7cm).

Transfer your measurements to the fabric, not forgetting the seam allowances.

Rectangle tunic for large size. Such a product will hide the flaws of the figure.

1. Choose a light, flowy fabric.
2. Fold 4 times to cut the neckline and wear.
3. A ribbon can be sewn to the bottom and tied at the sides.

Another option for a light tunic, which is also suitable for sewing home clothes, if you increase the length. Transfer the dimensions to the material and start sewing!

And a tunic and a dress! Just a few stitches and you have a beautiful piece in your wardrobe. Even a novice dressmaker can sew this pattern.

If you decorate the tunic with beautiful lace, you will get a nice little dress.

Knitwear can make a beautiful peplum outfit.

1. We fold the material along, put a T-shirt on it, circle it.
2. Cut out 2 pieces. If the peplum is to be sewn in, then the waist line should be cut.
3. A rectangle is cut out of knitwear, the length of which is equal to the volume of the waist and increased by 2 times.
4. The length of the peplum is from 10 to 20 cm. Slightly trim on a typewriter with a low thread tension.
5. We fold the upper and lower parts, insert a peplum between them, grind.
6. We process the neck, sleeves, bend.

Finally, I want to turn to novice dressmakers: sew an outfit for trial without a pattern from simple material, and then sew more boldly from whatever you want.

DIY simple dress This is a great opportunity to showcase your creativity. You can sew it not only for everyday wear, but also for a holiday.

The simplest do-it-yourself dresses

Before cutting the fabric, prepare the necessary materials and tools for work. Do this in advance so that the work goes faster and more fruitfully. What will you need?

Textile. If you are just trying yourself as a fashion designer and seamstress, then it is better not to use very thin or dense fabrics. It is equally important to choose the right drawing. Choose a fabric with an abstract pattern so that you don’t have to pick and match it during the work. If the fabric has a large pattern, then you need to take it with a margin in order to freely fit the pattern;

Tools. You need a meter, large scissors, several types of needles, strong threads to match the color, chalk, pins.

There are many simple patterns that can be sewn without a pattern. However, measurements still have to be done in order to estimate the amount of fabric needed. We suggest starting with this option. Draw 2 rectangles measuring 65 by 80 cm and 2 more rectangles with a size of 55 by 35 and 2 with a size of 7 by 25 cm. These are standard sizes. You can change them according to your preferences. Cut out the drawn bases, carefully circle with chalk, attaching to the fabric. Be sure to mark the openings.

Sew also. The young fashionista will definitely be delighted with the new thing and will wear it with pleasure.

Mix the bases together. Start work from the area of ​​\u200b\u200bthe hands, chipping them with pins. Baste with bright threads. Sew the basics on a typewriter. If you have an overlocker, overcast the edges on it. Sew on the sleeves, fold the neck 2 cm, sew, insert the elastic into the gutter. Process the edges of the hem, iron with an iron. The last step is decor. It can be a thin chain, a discreet brooch and any decorative element that will make the model more beautiful and elegant.

Take all measurements carefully, if at least one of them is done incorrectly, then the product can simply be spoiled. Each measurement should be taken by connecting the dots on the figure. On the stomach you need to make a reserve. There are basic and additional measures. For tailoring simple dress models, additional measurements are usually not required.

Simple patterns can be immediately transferred to the fabric and do not use paper. If you want to sew a long dress, then it will take about 5 meters of fabric to sew it. Buy material with a margin. If you plan to wear an outfit with heels, then more material will be needed. From the remnants of the fabric, you can make decorative elements, complementing them with rhinestones, beads, elegant flowers.

Fold the fabric in half, draw a radius R from the corner. Draw a radius L in the same way. Cut the skirt along the lines obtained, leaving reserves for the fabric. Cut out 2 rectangles - these will be the straps. Cut out the belt in detail. All patterns are ready, you can start sewing. Stock up on safety pins, needles and thread, and remember to stock up.

How about you?

Start sewing from the straps - fold the parts in half, fix with safety pins, carefully stitch along the length. Now sew the straps along the width. Work the belt the same way. It's time to sew the skirt. First of all, process the hem, and after it - the side sections. Measure the length from the skirt line and set aside another 4 cm from it. Step back from the resulting point 4 cm, bend it, apply a smell, align the marks for it, slowly, sew very carefully.

Mark the middle on the front and back of the skirt, overlap the straps, sew the resulting layers. The last stage is the fitting of the product. Carefully put it on yourself, look through all the stitched places to see the flaws. Iron all seams carefully. The model can, if desired, be decorated with a brooch, scarf, bow, etc.

Consider and.

DIY summer dress is simple

Summer casual dress should have the simplest cut. Even an inexperienced seamstress can sew it. As a rule, in a summer outfit, the emphasis is on fabric. It should be natural and let in as much fresh air as possible. It can be linen, cotton or chintz.

Preparatory stage

One of the most important moments is to take measurements correctly and build a pattern. The slightest mistake can lead to the fact that the model will turn out to be skewed and will not sit well on the figure. Especially when it comes to fitted outfits. In order to sew a summer dress, you need to take the following measurements:

- shoulder length;
- waist with hips
- neck girth
- length of the product
- length from back to waist
- girth above the chest and the chest itself

A simple summer dress with elastic bands

This is a great option for an informal meeting, an evening walk and a seaside resort. The pattern of this model is very simple and is a trapezoid or a regular rectangle. An elastic band will help to shape the product.

DIY dress easy simple

Sundress sundress

The flared sun style is very popular among fashionistas, because in such a simple outfit any girl will look fashionable and beautiful. The model can be made short or long. Based on the pattern, you can sew a dress and a sundress. The last option is perfect for summer.

Stages of work:

1. Take a square piece of lightweight fabric, cut out a circle. The radius of the circle should be equal to the length of the skirt + waist.
2. For the bodice, you need a rectangular piece of fabric. The length of the segment should be equal to the girth of the chest area, and the width - the distance from the waist to the desired level of the dress + 3 cm.
3. Sew the bodice. A fitted silhouette will help create tucks. Sew a zipper on the back.
4. In the center of the circle for the skirt, make an armhole. It should be OT + 10-15 cm. If this neckline is shifted down a little, you get an asymmetrical skirt.
5. Sew the bodice with the skirt, sew on the straps, work on the edge of the outfit.

You will be able to sew and.

Simple beginner DIY dress

A Greek-style dress is a model that will always be in fashion. Any fashionista can sew it for her wardrobe.

First way

1. Pick up a large piece of fabric.
2. Fix the upper part of the outfit on the shoulders. This can be done with pins or brooches.
3. Attach the model at the waist with lacing or narrow braid. Sew the side flaps so that the model does not swing open during movement.
4. Line up a suitable drapery and secure with braid.
5. Finally secure the gathers with a sewing machine.

Method two

1. Pick up a piece of fabric that should be 2 times your height. Add a couple more inches.
2. Spread the fabric on the floor, draw a straight line in the center. Thus, you marked the shoulder area.
3. Now you should decide on the depth of the neckline. Chalk mark the desired level. Draw the lines to the mark, cut out.
4. Pick up the material along the line of the shoulders, grab it with pins.
5. Under the bust, tie the outfit with a ribbon. Drape the fabric by pinning it to the ribbon. Do the same with the second breast. Do the same with the ribbon at the waist.
6. Get rid of the pins one by one and sew on all the folds. The front of the model is ready.
7. Make the back of the model similar to the front.

Simple do-it-yourself dresses patterns:

Method three

1. Choose or sew an outfit that fits your figure well.
2. Choose a flowing fabric that should match the shades of the main material. Put on a base dress, throw one piece of fabric over your shoulder.
3. Make a slot for the head.
4. Drape the material, pin it to the base.
5. Sew on the folds with simple stitches, gradually removing all the pins.
6. If you are completely satisfied with the drapery, remove the rough thread, cut it in the right places, tighten the material.
7. Sew the outfit in a suitable way.

Have you had a desire to sew an outfit with your own hands for a long time, but kept putting off this moment? Now you can safely go to the store and buy the right material to create your first masterpiece. Who knows, maybe the process will captivate you so much that you will replenish your collection very quickly. We have collected for you a collection of the simplest, but very beautiful dresses that will emphasize the figure and make the image stylish and unique.

Patterns of women's dresses from the bureau Grasser

The dress is the type of clothing that can perfectly emphasize the beauty of the female figure. Especially if such a dress is sewn individually. The GRASSER online store offers simple dress patterns that will be of interest to both beginners and experienced seamstresses. In our catalog you can pick up patterns of various models and for different female figures. Such patterns are created by real professionals of our clothing design and modeling bureau. This ensures that when sewing a dress, you will encounter a minimum of difficulties or problems.

Advantages of buying a ready-made pattern in our bureau:

• The pattern is made for a specific size (from 38 to 54);
• We offer patterns of modern models of dresses, inspired by fashion shows;
• An accessible description with diagrams and instructions is attached to the pattern;
• All patterns of dresses can be bought at a very low price.

Sewing a dress according to the pattern is easy!

Even if you are new to tailoring, with a ready-made pattern, the whole process of creating a dress will not take you much time. It is very convenient that all patterns are designed for printing them both on a conventional printer on A4 sheets and on a large-format plotter. Immediately after paying for the order, you will receive your pattern in PDF format, which can be downloaded from your personal account. Using our simple patterns, you will get real pleasure, creating an original new thing for your wardrobe.

Everyone prepares for it in their own way, but, of course, in advance: children write letters to Santa Claus, ordering the desired gifts, grandmothers make lists of dishes, the mere sight of which will make guests and relatives gasp in surprise, men puzzle over what gift to put under the Christmas tree of an incomparable mother-in-law, well, real fashionistas should take care of the dress in which you will see off the eventful 2011 and meet the new happy 2012! I will try to help you make the right choice and look fashionable, stylish and comfortable at the same time.

Probably ... this is the most beautiful of all the posts that I did! Its compilation gave me just a lot of pleasure! I hope that when viewing this post, a festive, joyful, light mood will be transferred to you! So, enjoy, choose and start immediately!

MODELING OPTIONS!!!

Modeling according to the options listed below is necessary according to the pattern-basis of the dress, made according to your own measurements.

OPTION 1
This chic dress was created for real beauties! And that is why such a dress should be in your wardrobe for the occasion of the “Big Out”! And sewing this dress is not as difficult as it might seem at first glance. Feel free to get down to business and surprise everyone with a chic outfit.

Pattern modeling.

Since this dress is very tight-fitting, take the minimum amount of freedom to fit.

On the front half of the dress on the skirt, flare as shown in the dress pattern1. The more you give in the flare, the more fluffy the skirt will be from top to bottom.
Draw on the template the cutout of the front half of the dress and the armholes of the dress. Cut piece 2. Cut the top of the front half of the dress along the lines and move apart as shown in pattern 2. If you want more gathers, move the pieces 3 cm apart instead of 2.
Model the back of the dress in a similar way.
Additionally, you need to cut out a part for draping the dress at the waist: for part 2, cut out a rectangle. The width of the rectangle should be equal to the width of part 2, and the height should be 2 times wider.
The rectangular part must be stitched on 2 sides, pulled off, put in pairs on the dress part 2, pulled off, equalizing on the sides, swept, stitched. Baste the drapery along the bottom and top of part 2. Next, sew the part as a single layer.
In addition, it is necessary to cut out 2 rectangles for a bow, 26 cm wide (13 cm in finished form) and 150 cm long (when tied, the width of the bow is 15 cm on each side of the knot).
The details of the belt are sewn into the sides of the dress and tied at the back with a bow.

OPTION 2
This colorful corsage dress is just made to win hearts: colorful prints, silk satin and draped details on the front of the dress are the main components of success.

Pattern modeling.

How to design and sew a dress.

On the front half of the dress, set aside 24-27 cm from the waistline upwards. Draw a horizontal line along the armhole line of the dress.
Set aside 4 cm down the front. Draw the line of the neckline of the dress according to the pattern.
Set aside 3 cm from the middle of the front of the dress along the waist line of the dress. From the right side of the chest tuck of the dress, draw a straight line to point 3.
From the left side of the chest tuck of the dress, draw a line of relief along the pattern.
Transfer the tail tuck of the dress to the center of the front. From the tail tuck of the dress, draw a line of the second relief along the pattern.
Cut off the front of the dress along the waist line.
Model the back of the dress as shown in Figure 2.
Additionally, build a draped dress detail. To do this, you need to measure the length along the waistline of the front of the dress. Set aside this value along the line.
The length of the detail on the side is equal to the length of the dress on the side from the waist to the bottom.
Shot the side of the detail from the side of the dress. Extend piece 20 cm down. Cut out 2 identical parts for drapery, sew them along the bottom, turn inside out and stitch. Then put the resulting part on the front of the skirt of the dress and sweep on the sides. Next, sew the skirt as a single layer.
In addition, re-cut the facing of the top of the dress with a width of 3 cm in finished form. In addition, cut out: a loop for a draping part 10 cm wide (5 cm in finished form) and 15 cm long (one end of the loop is superimposed on the waist section of the dress under the drapery part, the other end is bent over the draping part and superimposed on top).
From the lining fabric, cut out all the details of the dress, minus the facings.
Raised seams are reinforced with bones.

OPTION 3
This little black dress embroidered with rhinestones will make you the star of any party! You can sew such a dress yourself if you follow our instructions.

Pattern modeling.

Since the model of the dress is very tight, there is no need to give an increase in the freedom of the fit.
On the front of the dress, transfer the vertical chest tuck to the middle of the front, model the neckline, transfer the tuck along the waist of the dress to the side of the dress.
Cut the front of the dress pattern along the horizontal dotted lines and spread 2-3 cm into the assembly.
Make the length of the dress according to your own measurements. (Including dress frill).
Model the frill of the dress additionally as shown in the dress pattern.
Model the part embroidered with rhinestones as shown in the dress pattern 3.
This part must be cut out additionally in 2 copies.
Strengthen one detail with thermal fabric, embroider with rhinestones or stitch ready-made motifs.
Model the collar of the dress additionally.
Model the back of the dress as shown in dress pattern 4.

IMPORTANT! This dress is gathered at the side seams for a very flattering fit. Therefore, fabrics should be chosen with elastic additives in the composition.

Additionally, cut out the lining (without additives for assembly at the seams).

How to sew a dress.

From the main fabric cut out:
Before the dress - 2 children.
The back of the dress - 2 children.
Dress frill - 2 children.
Dress collar - 1 child. with a fold + 2 children.
The central detail embroidered with rhinestones - 2 children.

Before the dress - 1 child. with a fold
The back of the dress - 2 children.

How to sew a dress.

On the sides of the front and back of the dress, lay lines with a stitch length of 4 mm. Pull to the desired length according to the pattern.
On the middle seams of the front of the dress and the back of the dress, lay lines with a stitch length of 4 mm. Pull off, pull up.
Sweep the side seams of the dress, stitch.
Sweep the middle seam of the front of the dress, stitch.

Sew the lining of the dress along the side seams and along the middle seam of the back of the dress to the zipper opening.
Fold the dress from the main and lining fabric face to face, sweep and topstitch along the top seam.
Turn the dress right side out, sweep clean at the top.
Strengthen the central part with thermal fabric. Roll up on the sides.
Put the detail on the dress, baste, straightening the assembly of the dress.
On the second part, tuck the allowances on the sides.
Combine the parts with each other, put the second part on the wrong side of the dress on the lining, sweep.
Sew 2 pieces with one line to the edge.
Sew rhinestones and beads on the upper part by hand.
Sew the frill of the dress on the sides. Pull along the top of the frill.
Put on the bottom of the dress from the main fabric, bast, stitch.
Tuck the lining of the dress along the bottom and baste by hand, closing the allowances.
Tuck the bottom of the frill of the dress and topstitch.
Put the dress collar part reinforced with thermal fabric on the central part and sew.
Put the second part of the collar on top of the first and stitch along the top and sides.
Turn right side out, sweep clean.
Tuck the lower cut of the collar, bast, stitch.
Embroider the collar with rhinestones or ready-made motifs by hand.
Sew loops and hooks along the middle seam of the back collar.

OPTION 4
This dress is a real treasure! Such a dress can be sewn from iridescent gold satin with elastic threads, from taffeta and any other dress material.

Pattern modeling.

Since the dress is tight-fitting, allowances for freedom of fitting can be completely omitted or given the most minimal.
On the front half of the dress and on the back of the dress, transfer the tucks, as shown in the dress pattern. Model embossed seams along the lines of the tucks. Shorten the front of the dress and the back of the dress to the desired length of the skirt (without flounces).
The flounce of the dress is modeled separately. If it is not possible to cut out the frill of the dress without seams, you can make 2 seams that will match the side of the dress.

In addition, cut out the belt of the dress.

How to cut a dress.

From the main fabric it is necessary to cut out:
Dress detail 1 - 1 child. with a fold
Dress detail 2 - 2 children.
Dress detail 3 - 2 children.
Dress detail 4 - 2 children.
Flounce dress - 1 child. (or 2 children with a fold)
Dress belt - 2 children.
The details of the facing of the top of the dress completely duplicate the pattern of the dress to the waist.
Turning the details of the dress 1 - 1 child. with a fold
Turning det. dresses 2 - 2 children.
Turning det. dresses 3 - 2 children.
Turning det. dresses 4-2 children
The details of the facings of the dress must be reinforced with thermal fabric.

From the lining fabric, you need to cut out:
Details 1-4 minus turning.

Additionally, you need to buy bones for the side seams of the dress and the reliefs of the back of the dress.

How to sew a dress.

Baste and stitch the relief seams of the dress and the side seams of the dress.
The allowances of the side seams, taking together, stitch off 0.7 cm from the seam. Lay the line from the top of the bodice of the dress to the waistline of the dress.
Cut the bone to measure for threading into the resulting drawstring. The length of the bone should be 1 cm shorter than the drawstring. Insert a bone.
Re-stitch the drawstring along the top of the dress and along the waist line of the dress so that the bone does not fall out.
Sew a hidden zipper on the back of the dress.
Baste and sew a flounce along the bottom of the dress.
Strengthen the details of the facing of the top of the dress with thermal fabric.
Sweep dress facings with dress lining details.
Sweep side and embossed seams on the lining of the dress.
Fold the lining with the dress face to face. Sweep and stitch along the top and laces of the zipper.
Turn the dress inside out, sweep clean over the top and iron.
Tuck the bottom of the lining and baste by hand with hidden stitches, covering the sewing allowance of the frill of the dress.
Turn the flounce of the dress along the bottom and hem it manually with hidden stitches.
Sweep the dress belt and grind on all sides, leaving an open area for eversion.
Turn out the belt of the dress, iron it.
Sew up the open area by hand with blind stitches.
Put the belt on the dress along the seam and sew firmly to the dress with hidden stitches.
Tie a bow in front of the dress.

OPTION 5
This dress is for the young and brave!

Pattern modeling.

If you plan to sew a dress from an elastic fabric, then when building a pattern-the base of the dress, make a minimum increase in freedom of fitting (1.5 cm).

IMPORTANT! When modeling a dress, the front of the dress and the back of the dress must be completely redrawn on tracing paper.

The cutting of the dress must be done on a fabric laid out in one layer (except for the frill of the dress). It is necessary to cut out 2 identical parts of the frill, one for the back of the dress, the second part is the frill for the front of the dress.

OPTION 6
This lovely silk dress captivates, first of all, with its simplicity of modeling and execution.

Pattern modeling.

How to design and sew a dress.

On the front half of the dress, move the chest tuck to the side.
Shorten the tuck by 2 cm. Model the neckline, setting aside 24 cm from the bottom of the front neckline.
Flare the front of the dress on the side by 4 cm.
The back of the dress is modeled in the same way.
Draw a horizontal line from the bottom of the armhole. Cut off the top.
Move the tuck to the center of the back of the dress.
On the side, flare the back of the dress by 4-5 cm.
In addition, cut out 2 strips of fabric for the bow: one 65 cm long and 20 cm wide (finished 10 cm), the second 70 cm long and 15 cm wide (7.5 cm ready).

OPTION 7
This dress is a real dream! The dress is made of elastic satin, and its accent is unusual pleats along the skirt.

Pattern modeling.

Don't give any extra freedom of fit as the model is very tight.
Reshoot the pattern of the front of the dress on tracing paper completely.
Draw modeling lines on the bodice of the dress.
Cut off the excess at the top of the dress.
Flare the skirt as shown in the dress pattern.
The more you flare the skirt, the more fluffy it will turn out to the bottom.
Mark the squares on the wrong side of the dress pattern as shown in the pattern.
The length of the dress depends on the side of the square that you specify. Remember that when laying folds, we reduce their length by 2 times.
On the pattern, the length of the skirt of the dress from the line of laying the folds will be 40 cm (3 squares of 10 cm each (with folds laid) and 1/2 square along the bottom of the dress to align the bottom of the dress.
Model and mark the back of the dress in the same way.
The folds are not ironed, but are only swept along the blue dotted lines to the cover of the dress, which is additionally cut out according to the same pattern.
Then the folds are fixed with horizontal lines 5 cm long each.
The lining of the dress is cut 4 cm shorter than the dress.

How to cut a dress.

From elastic satin it is necessary to cut out:
Before the dress - 1 piece with a fold
The back of the dress - 2 children.

From lining fabric:
Before the dress - 1 child. bend
The back of the dress - 2 children.

In addition, cut out a strip of fabric 8 cm wide and 30 cm long to make a rose.

IMPORTANT! The hidden zipper should not be long - only about 30 cm and should end up to the folds.

How to sew a dress.

On the front and back of the dress, use running stitches to transfer the markings of the folds to the front side.
Do the same for the lining pieces.
On the front of the bodice of the dress, cover the tucks. Stitch.
Sweep and stitch tucks on the back of the dress.
Sweep the dress along the side seams, stitch.
Sew the details of the lining of the dress in the same way.
Put on the dress and lining it face to face, sweep and stitch along the top of the bodice of the dress. Turn out, iron.
Sew a hidden zipper on the back of the dress.
Turn the dress inside out. Lay the folds according to the markup, stitching them to the lining of the dress with short horizontal seams (5 cm each).
Trim the excess lining so that it is 3-4 cm shorter than the dress.
Tuck the bottom of the dress and sew to the lining by hand with hidden stitches.

How to sew a rose

Fold a strip of fabric in half lengthwise and then twist in a spiral, starting from the center of the flower, fasten as the petals form with stitches.
Hide the edge of the strip under the bottom of the flower.
Sew a flower to the dress.
Decorate the bodice of the dress with ready-made motifs.

OPTION 8
Do you want to be the star of the party? Then, without hesitation, sew this dress for yourself!

Pattern modeling.

Give an increase in freedom of fit to the minimum - 1.5 cm.

Cut the pattern of the front half of the dress and the back half of the dress on tracing paper and model the bodice and skirt, as shown in the drawings of patterns 1 and 2.

Additionally, you will need to cut out 2 strips of fabric for the bow: one 20 cm wide (10 cm ready) and 80 cm long, the second 30 cm wide and 15 cm long (finished) and 60 cm long. The bow can be reduced at will.

OPTION 9
This charming dress is just made for noisy parties! And you should definitely sew this dress! After all, modeling it is very simple, the main thing is to make a little effort and you are a star!

Pattern modeling.

Allowances for freedom of fitting in this case are not given.
The width of the mesh for the skirt must be calculated as follows: The volume of the hips multiplied by three. The calculation given on the pattern is given for the Hips of the early 96cm.
The length of the mesh for the skirt is 80 cm (finished - 40 cm).
Mark the folds as shown in pattern 1.
Model the bodice of the front of the dress and the back of the dress as shown in patterns 2 and 3.
Additionally, you need to cut out the bottom of the dress from the lining fabric.

How to cut a dress.

From the main fabric cut out:
The middle detail of the bodice in front of the dress - 2 children. with bend
The side of the front of the dress - 4 children.
The side of the back of the dress - 4 children.
The middle detail of the back of the dress is 4 children.
Dress skirt - 1 panel
From the lining fabric, cut out:
The front part of the skirt of the dress - 1 child. with a fold
The back of the skirt of the dress - 2 children.

Additionally, cut out a belt, 8-10 cm wide (4-5 cm in finished form), and 100 cm long. Flare the ends of the belt by 2-3 cm.

How to sew a dress.

Details of the bodice of the front of the dress and the back of the dress should be strengthened with thermal fabric.
Sweep and stitch the details of the bodice in front and back of the dress along the relief seams. Stitch.
Side seam allowances only, stitch together at a distance of 0.7 cm from the connecting seam. Insert a bone into the resulting drawstring, 1 cm long shorter than the side seam without allowances.
Lay folds on the skirt of the dress from the main fabric, as shown in the pattern. Ideally, you should get a ball of folds.
The calculation of the grid is done on the volume of the hips, therefore, at the waist, each fold must be laid a little further than the intended line.
The same can be done on the bottom of the dress, then the shape of the skirt of the dress will look more like a ball.
To keep the folds well, make short bartacks on each pleat that will hide under the layers of fabric.
If the above diagram does not suit your figure, you can lay folds in a chaotic manner right on the mannequin.
Sweep the bottom of the dress and the top of the dress. Sweep a zipper down the back.
Try on and make adjustments as needed.
Sew on a hidden zipper.
Sweep and stitch the details of the bodice from the main fabric (dress lining) without strengthening with thermal fabric.
Sweep and stitch the details of the dress skirt from the lining fabric.
Connect the top and bottom of the lining of the dress, sweeping and stitching along the waist seam.
Apply face to face the main product and the lining of the dress.
Sweep and stitch along the top of the bodice of the dress.
Sweep and stitch the dress and lining along the bottom.
Turn the dress right side out through the open area, sweep clean at the seams.
Tuck the zipper allowances and sew by hand with a blind seam.
In addition, sew a belt for the dress. To do this, you need to cut out 2 parts 4-5 cm wide and 100 cm long.
The ends of the dress belt have a flare of 2-3 cm.
Place the details of the dress belt on top of each other face to face.
Sweep and stitch on all sides, leaving an open area for eversion about 5 cm.
Turn the belt out, sweep it cleanly, stitch it.
Sew up the open section of the belt manually with a hidden seam.

The following models are developed on the bases calculated in the Cutter program.
You can download a demo version of this program.

OPTION 10
The dress is tight-fitting at the waist and narrowed to the bottom of a non-stretch dress fabric. Ahead is a bolero with a jacket collar and lapels. Shoulders are slightly slumped. Asymmetric fastener with a hidden zip moved to the side seam. The lapel of the shelf is stitched to the fold of the lapel of the bolero. Back with reliefs from the armhole and a slit at the bottom. Under the dress is a corset with lace trim.

Model processing technology

Stitch the zipper into the left relief of the shelf up to the fold line. Overstitch the edges of the relief cuts and the lapel with overturns, turn right side out and baste the edges. Unscrew the flyaway part along the fold, bast to the shelf and overcast the open sections together. Stitch the side tuck on the shelf and stitch the relief of the shelf. Stitch the edge of the side and the ledge of the lapel of the bolero with a lining. Stitch the armhole of the bolero from the shoulder to the notch. Turn the details of the bolero right side out. Stitch the armhole of the bolero from the notch down with a relief. Stitch the right shelf to the bolero. Stitch the middle seam of the back, darts from the shoulder and reliefs. Stitch the armhole of the back with a stitch. Stitch the shoulder seams of the top and lining. Stitch the side seams by inserting the cuts of the front and the bolero between the cuts of the back and the facing of the back. Process the collar and sew it into the neck. Process the bottom of the product.

OPTION 11
Dress of an adjacent silhouette with one sleeve, cut in the middle, and a shoulder strap. A bodice with an asymmetrical bottom in front, the back is lowered from the waist. On the back there is a zipper. The skirt is flared.

Since the dress has an asymmetric shape, it is necessary to have 2 sets of bases and build the right and left parts of the front and back separately. On the right and left shelves, transfer the shoulder tuck to the side cut. Glue the right and left shelves along the front cut and apply model cut lines along the top and bottom of the front of the bodice. On the left back, mark the width of the shoulder equal to the width of the shoulder in front from point P along the line, because draw the back in this model without a tuck and draw the armhole line from point P to P3. Apply model cut lines on the left and right back. Measure the length of the shoulder strap at the front and back. Cut the sleeve in the middle and expand the front and back of it.

OPTION 12
Evening dress in soft jersey, tailored to the figure, with a large neckline, falling flounces, with a high side slit, with long sleeves gathered at the wrist. The evening dress is designed on the basis of a dress of an adjacent silhouette with a single-seam sleeve without a tuck.

To model this dress, you need two sets of patterns and increase the length of the sleeve by 10 cm.

On the shelves, transfer the shoulder tuck to the side cut. Connect two shelves along the middle cut and apply model lines. Cut off the right side of the shelf. Mark cut lines on the right side of the shelf.
Cut out the allowance for the tuck and cut the right side of the shelf along the marked lines without bringing the cuts to the side cut by 0.5 cm. Move the cuts at the same distance from each other, while closing the side tuck. Circle the resulting pattern and cut it out.

On the back, close the shoulder tuck, for this, draw the line of the shoulder from point A2 to point P and draw the armhole from point P to point P3. Deepen the back neckline. Draw the shuttlecock in the form of a spiral. The length of the inner spiral is equal to the sum of the lengths of the neck cut and the shelf cut. The width of the shuttlecock at its widest point is 15 cm.

Gather the sleeve at the bottom along the sewing seam.

OPTION 13
Evening dress in brown chiffon with pink satin lining. Top with feminine draping. Strongly flattering cut. Bodice with an undercut in the middle of the distance from the chest line to the waist line. Skirt full sun. Cuts of an armhole and a mouth are processed by an elastic band. In the side seam there is a fastener with a hidden zipper. All sections of the top and lining are ground at the same time, only the chiffon skirt at a distance of 10 cm from the bottom is ground without lining.

Based on the dress of the adjacent silhouette, cut off the bodice along the outlined relief line. On the shelf, close the tuck from the shoulder. On the shelf and back, mark the location of the cuts of the neck and armholes according to the model. On the lower parts of the shelf and back, close the waist darts. These are the details of the excellent lining. Chiffon details should be 1.5 times wider along the shoulder and bottom sections, as well as along the side sections of the lower parts of the shelf.

Open flared skirts "full sun" on the fabric:
The radius of the notch at the waist is St / 3. On an oblique thread, reduce the notch at the waist by 1.5 cm. From the waist, with the help of auxiliary segments equal to the length of the skirt with an allowance for processing, draw the line of the bottom of the skirt.

Fabric consumption for a flared skirt "full sun":
L = 2R + √ (2R)2 - W2

where:
L - web length
R is the radius of the circle
R \u003d St / 3 + skirt length with processing allowance
W - web width

OPTION 14
The evening dress is made of thin knitted fabric. Ahead is a deep neckline, reliefs from the armhole. The bodice of the back consists of three triangular parts. At the end of the upper part of the bodice there is an air loop of 2 cm. The side parts of the bodice of the back end with ribbons, which are threaded into the loop of the upper part and tied. The back skirt consists of two parts.

The model was developed on the basis of a dress of an adjacent silhouette, in which all allowances are reduced to zero for a tight fit.

OPTION 15
The dress is adjacent along the bust line and extended from top to bottom from crepatlas. Folds are laid in front, in the folds of which ruffles are sewn. Finishing lines are laid on the folds of the folds to the bottom. Soft folds on the sleeves. At the bottom of the sleeves and between the folds, glass beads are sewn, shimmering in subdued light.

The model was developed on the basis of a straight-cut dress with a one-piece sleeve. In the measurement "Length of the arm to the first joint of the thumb" (Dr1s), you must enter the length of the sleeve for this model, namely to the elbow. Enter the shoulder girth value at the top Opv into the Opv measurement. Pb=5, Popv=20, Pozap=10 cm.
On the shelf, outline the lines for stitching the ruffle, cut the base along these lines and push the details 2 cm apart. The dotted line marks the facings of the neck of the shelf and back.

Model processing technology

Ruffles are processed with a zigzag stitch with a double hem of the cut, preferably with a snail foot. Finish the end cuts with a seam in the hem. Overcast the front and back sections, except for the shoulder sections, the neckline sections and the armholes. Bend the bottom of the shelf and stitch at a distance of 2 cm from the fold, leaving 5 cm unstitched from the side cuts.

Mark the fold lines of the folds on the shelf. Baste ruffles to the folds of the folds to a depth of 1 cm. Sew the ruffles with a seam 0.5 cm from the fold of the fold and continue stitching to the bottom.

Baste the ruffles to the shelves and stitch them onto the shelves by laying a line in the stitching line of the ruffles. Overcast the neckline and overstitch the neck of the shelf with it. Sew the seam on the facing 1 mm from the fold. Iron the facing on the wrong side, securing it along the shoulder section. Sew back seam and iron. Overcast the facing and overstitch the neck of the back with it, leaving the allowances of the shoulder seams unstitched. Sew overturn seam to overturn 1 mm from the fold.

Put the shoulder sections of the shelves together with the piping between the shoulder sections of the back and the piping of the neck of the back, stitch the shoulders and overcast from the side of the shelves. Iron the facing of the neck of the back inside out. Stitch the side cuts and iron. Turn the bottom of the back over and stitch at a distance of 2 cm from the fold. Overcast the sleeves, except for the cut of the hem. Lay the folds in the direction indicated on the drawing. Lay folds in the middle of the sleeves and fasten them with a zigzag stitch of 4-5 punctures in one place. Sew glass beads on the sleeves. Stitch the side sections of the sleeves, hem the sleeves. Sew the sleeves into the armholes and overcast the stitching seams from the side of the front and back.

OPTION 16

Dress in soft crepe satin. The bodice is free with one-piece sleeves. The collar is double, so that the dress rests on the shoulders, an openwork braid is laid at the back. The skirt is slightly tapered at the bottom. Wide belt with bow tied twice.

The model is designed on the basis of a dress with a straight silhouette. The body position is 0, Pk=0. The chest undercut is closed from the shoulder, and open from the waistline. The bases of the bodice of the front and back are connected so that their middle cut is on the same line. Distance |A4,H| equal to the length of the sleeve plus the width of the shoulder slope "Shp". The model is cut without middle and shoulder seams.

OPTION 17
Dress of an adjacent silhouette from chiffon on a lining. The lining of the bodice is duplicated. Fastening on the side with a hidden zipper. The length of the dress is from the short side to the middle of the calf, with a length to the ankle. The figure-hugging cut makes her slimmer.

The model is developed on the basis of a dress of an adjacent silhouette. Printed two sets of patterns. On both halves of the shelves, tucks are closed from the shoulder, and open from the side sections. Shelves and backs are connected vertically, then all the constructive lines necessary for the model are applied, taking into account that the shoulder width of the bodice in the cut should be twice as wide as in the finished form. The skirt consists of two wedges, the shape and method of cutting which are shown in the drawing.

OPTION 18
Strongly flattering cut. Seam at the waistline and under the bust. The top part of a bodice with a drapery. The lower part of the bodice tightly fits the figure. The shoulder is lowered, in front there is a deep neckline. Flared skirt". Length 6 cm below the knee.

The model is developed on the basis of a dress of an adjacent silhouette. Mark a cut line on the shelf. Move the shoulder tuck to the bottom edge of the top of the shelf. Lengthen the shoulder by 5 cm and draw a new armhole shape. Mark the shape and depth of the cut. Draw the lower part of the shelf horizontally, shortening it by the amount of the tuck. Mark the cut line on the back. Draw the shoulder line from point A2 to point P in a straight line and continue the shoulder by 5 cm and draw a new armhole shape. Mark the neckline and middle back. Cut the lower part of the backrest horizontally by the depth of the tuck.

The flared skirt is built according to the calculations below:
OT \u003d St * 1.4 - the radius of curvature of the waist line.
TB \u003d Dts / 2 - the distance from the waist to the hips.
TH = skirt length
TT1 = St + Fri
BB1 = Sat + Fri

Where:
Dts - the length of the back to the waist.
St - semi-circumference of the waist.
Sat - half-circumference of the hips.
Fri - waist allowance.
Pb - allowance for the hips.

OPTION 19
Dress in fine jersey with a satin effect. The top of the dress is straight cut. The skirt is two-layer, tight-fitting figure. At the top of the back there is a zigzag stitched elastic band. An elastic band with a zigzag stitch is sewn on the stitching seam of the bodice and skirt.

The model is designed on the basis of a dress with a straight silhouette. It can be performed without side seams on the bodice by connecting the sections.

OPTION 20
Dress from a knitted fabric of the fitted silhouette, without sleeves, with the overestimated line of a shoulder. Asymmetrical neckline. Strap on one shoulder, thick gathering on the other.

The model was developed on the basis of a dress with a fitted silhouette without any allowances for a loose fit. Connect the drawing of the right and left shelves along the half-skid line and cut the drawing from one highest point of the chest to the other and cut out the middle part from tuck to tuck. Close the right tuck from the shoulder by turning the cut out part of the drawing around the highest point of the right chest. Connect the highest point of the neck to point A7 on the left side of the drawing with a convex line. Make a neck according to the model. Narrow the shoulders to the desired shoulder strap width.

OPTION 21
Fitted silhouette dress in silver crepe satin, lined with a black frill sewn on the bottom. The detachable yoke is assembled under the jumper.

The model is developed on the basis of a dress of an adjacent silhouette. The shoulder tuck has been moved to the middle cut of the shelf.

Having sewn a long dress according to this design, but without a frill at the bottom, you will get a wonderful evening dress.

Model processing technology

Glue the straps and the lower parts of the trim strips with interlining. Stitch the jumper along the side cuts and turn right side out. Stitch the middle section of the yoke to the front side. Stitch the tuck on the yoke to the front side, after inserting the jumper from the wrong side into the seam. Bend and stitch the bottom of the flyaway yoke.

Assemble the top of the trim strips. Stitch the trim along the top side seam. Turn the strips right side out and secure with a stitch along the bottom and side cuts. Stitch the strips between the shelf yoke and the detachable yoke at a distance of 4 cm from each other. Fasten the lower section of the jumper behind the seam of the coquette tuck from the front side. Overcast the shelf and the lining to it.

Stitch the yoke to the front, inserting it between the front and the lining. Overcast the sections of the back and lining to it. Stitch the middle seam of the back and iron. Stitch darts on the back. Stitch the top edge of the back with a lining. Insert the elastic between the back and the lining and topstitch it with a zigzag stitch.

Stitch back straps and turn right side out. Stitch the front straps along the outer edge, inserting the back straps into the neckline. Sew the front straps along the inner edge to the seams for attaching the yoke and turn right side out. Sew the front straps to the right side of the yokes.

Sew the side sections of the front and back along with the lining to the waist, and then separately the sections of the dress and lining. Turn the front straps from the wrong side and topstitch them near the stitching seam. Process the frill, stitch it to the bottom of the lining. Hem the bottom of the item.

If the model seemed simple to you, then you are mistaken)) See what you can create from this pattern:

OPTION 22
Dress in a thin jersey fabric with a tight fit. The parts of the bodice are intertwined, the straps on the back are twisted. On the side and back sections on the wrong side, an elastic band (elastic band) is sewn in a zigzag stitch.

The model was developed on the basis of a dress of an adjacent silhouette with a preliminary increase in the values ​​of the vertical measurements of the figure, namely: chest height - Vg, front length to the waist - Dt.p, back length to the waist - Dt.s, oblique shoulder height - Vp.k, length sides - dB, all 1.3 times. Allowances for freedom of fitting Pg, Fri, Pb are equal to zero. Connect the upper and lower parts of the bodice by turning the upper part, as indicated by the arrow.

Model bodice processing technology

Straight upper cuts and lower cuts from notch to notch of both parts of the bodice are sewn into a hem with a closed cut. Sew the right side of the bodice along the lower cut to the notches. Pass the left part of the bodice into the hole formed in the right part of the bodice after sewing and sew to the notches. Stitch the bodice to the shelf.

OPTION 23
Lined crepe satin or chiffon dress with a body-hugging fit. A fastener on a secret lightning in a back. The top of the dress is trimmed with bias tape from the main fabric. The model was developed on the basis of a dress of an adjacent silhouette, the undercut on the chest from the shoulder cut was transferred to the side cut.

OPTION 24.
Very beautiful model of a tunic, it is sewn as easy as shelling pears. Suitable for a cocktail dress, for pregnant women and luxurious women.

OPTION 25.
Pattern-base of a dress for ladies with appetizing forms + 2 patterns of cocktail dresses and a lot of ideas, including evening dresses!
Watch and

OPTION 27. Corset dress!
Watch .

OPTION 28. In this magnificent dress you will be the queen of any evening!
Watch .

OPTION 29. Gorgeous satin dress!
Watch .

OPTION 31. Evening satin dresses!
Watch .

OPTION 32. Strapless dresses!
Watch .

OPTION 33. The sexiest and easiest dress to make!
Watch and .

OPTION 36. Dress with drape at the neck!
Watch .

A fashionable review of evening dresses from leading fashion houses! Season 2011-2012!

Many women, as an outfit for the New Year, choose a dress. In our opinion, no suit or insanely stylish trousers combined with a blouse will emphasize your femininity and sexuality like a dress! So what kind of dress can you wear for the New Year?

Fashionable dress for the New Year 2012 - fabric
Having decided on the model, take the choice of material from which your festive masterpiece is woven no less seriously. It can be silk, satin, etc., but the undisputed leader of fashion shows are velvet dresses: luxurious, flowing, a bit reminiscent of the water surface.

Fashionable dress for the New Year 2012 - color
The mega trendy palette today is headed by the alluring and bewitching color of silver and gold, as well as all shades of gray, beige, sand, bright red and deep purple and, of course, stylish black and chic white have not sunk into oblivion.

Cocktail Dress
Are you the owner of chic, slender legs, and you certainly want to demonstrate your pride to others? Then you should opt for a sexy, short cocktail dress - this is an ageless classic that can be presented in a new way by playing a little with the material. For example, a short lace dress will create a unique seductive, light look. Designers also offer us luxurious dresses embroidered with crystals (Givenchy collection, Donna Karan).

Dress to the floor
If you want to make a lasting impression, you just need to try on a floor-length dress! Nothing will add chic and luxury to your look like a long dress. At the same time, it can be without a deep neckline, but with an almost indecent cutout at the back ... The New Year is all about surprises, and your bare back will be a pleasant, alluring surprise for your companion! If you are not ready to expose the most graceful part of your body so much, designers suggest that we use lace inserts.

Dress - "fish"
For owners of a slender figure, designers offer to give their preference to a fish dress. In this model, you will feel like a world-class star on the red carpet before the Oscars.

Pattern: puffy dress for a girl with a pleated skirt (for 9 years)

Pattern: puffy dress for a girl with a sun skirt (for 9 years)

How to sew a puffy dress for a girl

Step 1. For a dress with pleats, you should first start working from the bottom. Process the bottom of the product and then lay the bow folds, you can see how to make a skirt with pleats in this

Step 2. On the top of the dress, sew the side and shoulder sections.

Step 3. Sew the cuts on the skirt. If you chose a model with a sun skirt (I wrote about how to sew a sun skirt), sweep the top cut of the skirt and gather it to the size of the bottom cut of the top of the dress. Then sew the skirt to the top.

Step 4. For convenience, sew a zipper into the back middle seam.

Step 5. On the sleeves, if any, sew the seams. Sweep the top sections and sew in the sleeves.

Step 6. To make the skirt even more magnificent, you should make a tulle petticoat identical to the main skirt. Pull it over the dress, turn it up and sew it to the zipper, and then to the seam of the skirt.

Pattern of a fluffy dress for a girl

Download the patterns at the end of the post, open the PDF file and print in full size. Cut out the details and reshoot them onto the fabric.

Dress pattern for a girl for 2 years (download below)

What do you need:

• 60 cm of elastic fabric for the top,
• 90 cm of knitted fabric for the skirt,
• paper pattern.

The width of the fabric cut for the skirt is 90 cm, and the length depends on your preferences (measure from the girl's waistline).

Finish the bottom edge of the sleeves. Cut off the excess on small sleeves (shown by the arrow). Baste and tighten a little so that the top of the sleeve is 12.5 cm. Sew the sleeves to the front and back of the top shelf. Sew the side seams on the top of the girl's dress.

Sew the ribbon to the neckline. It is better to sew with a stretch seam, such as a zigzag or stretch seam.

Process the bottom of the future skirt. Baste the top and tighten the thread until the resulting size of the top of the skirt matches the bottom of the top. Pin the skirt to the top and sew.

Another dress for a girl, sewn according to this pattern

MK: how to quickly sew a puffy dress with a ballet skirt

And here is another version of a magnificent dress for a girl. It can be sewn in a matter of minutes, since the upper part will be ready. For her, we will take a blouse of a suitable size.

What will be required:

• Blouse (you can T-shirt),
• 50 cm of knitted material for the petticoat,
• 1 m tulle,
• elastic band.

Step 1. Cut off the excess part of the sweater so that it ends at the level of the girl's waist.

Step 2. Sew on a wide elastic band.

Step 3 Cut out two trapezoidal pieces from the knitted fabric. To do this, attach the fabric to the cut of the blouse and draw two inclined lines starting from the waist. Cut out the resulting A-shaped pieces and sew along the sides.

Step 4. Cut the tulle into 2 equal pieces for a two-layer skirt. Baste the cuts along the top and tighten to the size of the bottom of the top of the dress (in other words, to the size of the top cut of the petticoat). Sew the tulle skirt to the petticoat, and then sew to the wide elastic band on the top of our dress.

Master class: how to sew a dress for a girl from an adult sweatshirt

Now let's see how to convert your sweater into a dress for a girl. For work, you only need the sweatshirt itself.

First you need to rip off the sleeves. Then attach the child's T-shirt to the folded sweater, tucking it in from below (tuck it where the waist begins). Circle and cut out the top. On the bottom, draw pockets for the top of the dress. Next, draw a straight line to the bottom. Cut out the bottom of the piece.

Cut out pockets on the remaining fabric. To do this, attach the cuts for the pockets on the skirt to the fabric, circle, and draw the rest.

On the sleeves of the sweatshirt, cut out the sleeves for the baby dress. To do this, attach the sleeve to the top of the dress and draw a curved line from the bottom. Sew on pockets.

Sweater dresses for girls - final

Sew the top and bottom pieces. Dress for a girl from a sweatshirt is ready!